21,39 0,842 82,55 ±0,13 3,250 ±0,005 STANDOFF ABSTAND 82,55 ±0,13 3,250 ±0,005 170,82 ±0,13 6,725 ±0,005 1 8 1 8 1 8 1 8 1 8 1 8 1 8 1 8 1 8 1 8 1 1 8 13,80 0,543 11 x 13.97 = (153,67 6,050 ) 8 3,20 ±0,20 0,126 ±0,008 3,68 RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT UL 94 Val ue T e st D ata Stand ard ap p l i c . Val ue PBT 30% Me c hani c al p ro p e rti e s C5210 (acc. JIS) Insertion/withdrawal force IEC 603-7 max. 20 N 30 µin Au over 50 µin Ni Mechanical operations IEC 512-5, 9a min. 1.000 80 µin matte Sn over 50 µin Ni Effectiveness of connector C2680 (acc. JIS) coupling device IEC 512-8, 15f 50 N 50 µin Ni / 80 µin Sn El e c tri c al p ro p e rti e s Cre e p ag e / c l e aranc e d i stanc e s a) Contact - contact IEC 807-3 0,52 mm Tray b) Contact - shell IEC 807-3 min. 1,0 mm 235°C at 3-5s Vo l tag e p ro o f (Di e l e c tri c Wi thstan d Vo l tag e ) wave a) Contact - contact IEC 512-2, 4a min. 1.000 V AC/DC b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC Current carrying capacity IEC 512-3, 5b 1,5 A @ 25° C V0 Contact resistance IEC 512-2, 2a max. 30 mOhm E145613 Insulation resistance IEC 512-2, 3a min. 500 MOhm Yes En v i ro nme n tal p ro p e rti e s Operation temperature 0 - 70° C TRANSMISSION REQUIREMENT ÜBERTRAGUNGSANFORDERUNG PART NO. IDENT. NR. 133786 Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. Stand ard ap p l i c . Standard description Standard description Thickness of plating Thickness of plating Standard description A sse mb l y p ro c e ss Packaging Solder temperature Suitable assembly process A p p ro v al s UL insulation body UL File No. RoHS compliant 10,89 0,429 NOTE 1: C-UL APPROVED E145613 NOTE 2: RoHS COMPLIANT T e c hnical spe cif ic at io ns Mate ri al s & Fi ni sh Insulation body Contact material Contact finish, mating zone Contact finish termination zone Shell/shield material plating shield / shielding pin 14,89 0,586 TOP OF PCB LP 0,38 ±0,10 0,015 ±0,004 171,95 ±0,20 6,770 ±0,008 CONTACT FINISH OBERFLÄCHENBEHANDLUNG 0,8µm Au [30µin], OVER Ni CATEGORY 5 Scale Tolerances Information: 2:1 All Dimensions in mm[in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJR 8P8C, 1X12 133844 www.ERNI.com c 21.10.2014 Index Date Class MJ I (1/2) A3 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED 163,70 6,445 149,73 5,895 135,76 5,345 121,79 4,795 107,82 4,245 93,85 3,695 79,88 3,145 65,91 2,595 51,94 2,045 37,97 1,495 2,54 0,100 24,00 0,945 2,54 0,100 1,27 0,050 10,16 0,400 8 8 8 1 1 1 8 1 8 1 1 8 8 8 1 1 1 1,27 0,050 9± 0,8 0,0 7 ± 35 0,0 0,0 03 X 1 8 8 1 1 96 3,25 ±0,07 0,128 ±0,003 X3 1,60 ±0,07 ,003 0,063 ±0 X3 2,73 0,107 2,73 0,107 82,55 3,250 1:1 82,55 3,250 Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. 3,68 0,145 8,89 0,350 10,16 0,400 2,54 0,100 8 8 Scale Tolerances Information: 2:1 All Dimensions in mm[in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJR 8P8C, 1X12 133844 www.ERNI.com c 21.10.2014 Index Date Class MJ I (2/2) A3