SS52A

SS52A
SCHOTTKY RECTIFIER
Features
• Ideal for surface mount applications . Easy pick and
place
• Built-in strain relief
• Low forward voltage drop
• RoHS Compliant Product
Mechanical Data
• Case: Molded plastic
• Epoxy: UL 94V-0 rate flame retardant
• Metallurgically bonded construction
• Polarity: Color band denotes cathode end .
Mounting position: Any
• Weight: 0.65 grams
Packing & Order Information
5,000/Reel
Graphic symbol
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Maximum Ratings (Tc=25°C unless otherwise noted)
Parameter
Symbol
SS52A
Unit
Maximum repetitive peak reverse voltage
VRRM
20
V
Working peak reverse voltage
VRWM
20
V
Maximum DC blocking voltage
VDC
20
V
IF(AV)
5
A
IFSM
80
A
TJ
-50 to +150
°C
TSTG
-50 to +175
°C
Maximum average forward rectified current
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
Operating junction temperature range
Storage temperature range
Notes:
Mounted on 2” Square PC Board with 1” Square Total Pad Size, PC Board FR4.
Publication Order Number: [SS52A]
© Bruckewell Technology Corporation Rev. A -2014
SS52A
SCHOTTKY RECTIFIER
Electrical characteristics (Tc=25°C unless otherwise noted)
Parameter
Symbol
Instantaneous forward voltage at IF=5A, Tj=25°C
Maximum reverse current
VRRM
Value
Typical
Max
0.49
Tj=25°C
0.52
Tj=125°C
Thermal characteristics (Tc=25°C unless otherwise noted)
Parameter
Typical thermal resistance
V
0.5
m’A
50
m’A
Value
Unit
IR
at working peak reverse voltage
Unit
Symbol
SS52A
RθJL
20
Rthja
50
°C/W
Notes:
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width ≤ 40 ms
Publication Order Number: [SS52A]
© Bruckewell Technology Corporation Rev. A -2014
SS52A
SCHOTTKY RECTIFIER
■RATING AND CHARACTERISTIC CURVES
FIG.1-FORWARD CURRENT DERATING
CURVE
FIG.2-MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
FIG.3-TYPICAL INSTANTANEOUS FORWARD
FIG.4-TYPICAL REVERSE CHARACTERISTICS
CHARACTERISTICS
Publication Order Number: [SS52A]
© Bruckewell Technology Corporation Rev. A -2014
SS52A
SCHOTTKY RECTIFIER
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE
WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or
their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained in any datasheet or in any other disclosure relating to any product.
Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products
for any particular purpose or the continuing production of any product. To the maximum extent
permitted by applicable law, Bruckewell disclaims
(i) Any and all liability arising out of the application or use of any product.
(ii) Any and all liability, including without limitation special, consequential or incidental damages.
(iii) Any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on
Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in
generic applications.
Such statements are not binding statements about the suitability of products for a particular
application. It is the customer’s responsibility to validate that a particular product with the properties
described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance
may vary over time.
Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of
purchase, including but not limited to the warranty expressed therein.
Publication Order Number: [SS52A]
© Bruckewell Technology Corporation Rev. A -2014