Silicon Bridge Rectifiers BR5005L-G Thru. BR5010L-G Reverse Voltage: 50 to 1000V Forward Current: 50A RoHS Device Features BR-L Metal Heat Sink -Plastic case with heatsink for heat dissipation. -Surge overload -500 Amperes peak. 0.140(3.60) 0.120(3.05) 0.442(11.23) 0.424(10.77) Mechanical Data 0.052(1.30)DIA. 0.048(1.20)TYP. -Epoxy: U/L 94-V0 rate flame retardant. 1.134(28.80) 1.114(28.30) -Case: Molded plastic with heatsink integrally, mounted in the bridge encapsulation. 0.550(13.90) MIN. -Mounting position: Any 0.220(5.60) 0.180(4.60) -Weight: 30 grams -Terminals: Wire lead Ø 50mils. 0.748(19.00) MIN. Dimensions in inches and (millimeter) Maximum ratings and electrical characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol BR5005L -G BR501L -G BR502L -G BR504L -G BR506L -G BR508L -G BR5010L -G Unit Maximum Peak Recurrent Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Current for Resistive Load @TC=55°C I(AV) 50 A Peak Forward Surage Current , 8.3ms Single Half Sine-Wave Super Imposed On Rated Load IFSM 500 A Maximum Forward Voltage Per Bridge Element at 25A Peak VF 1.1 V Maximum Reverse Current at @ TJ=25°C Rate DC Blocking Voltage @ TJ=100°C IR Parameter Typical Thermal Resistance (FIG.3) Operating Temperature Range Storage Temperature Range 10 μA 1000 RθJC 2.0 °C/W TJ -55 to +150 °C TSTG -55 to +150 °C REV:B Page 1 QW-BBR63 Comchip Technology CO., LTD. Silicon Bridge Rectifiers Rating and Characteristics Curves (BR5005L-G Thru. BR5010L-G) Fig.2 - Maximum Forward Surge Current Fig.1 - Derating Curve Output Rectified Current 50 Peak Forward Surge Current, (A) 500 Average Forward Current, (A) With Heatsink 40 30 20 10 0 0 20 40 60 80 400 300 200 100 0 100 120 140 160 1 10 100 Case Temperature, (°C) Number Of Cycle At 60Hz Fig.3 - Typical Forward Characteristics Fig.4 - Typical Reverse Characteristics Instantaneous Reverse Current, (μA) 100 Instantaneous Forward Current, (A) Pulse Width 8.3ms Single Half Sine-Wave (JEDEC Method) 10 1.0 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 10 1.0 0.1 0.01 1.6 TJ = 25°C 0 20 40 60 80 100 120 140 Percent of Rated Peak Reverse Voltage, (%) Instantaneous Forward Voltage, (V) REV:B Page 2 QW-BBR63 Comchip Technology CO., LTD. Silicon Bridge Rectifiers Marking Code BR5005L-G BR5005L BR501L-G BR501L BR502L-G BR502L BR504L-G BR504L BR506L-G BR506L BR508L-G BR508L BR5010L-G BR5010L xx L Marking code BR x Part Number - + C XXX / XXXX = Product type marking code Standard Packaging BULK PACK Case Type BR-L BOX CARTON ( pcs ) ( pcs ) 120 1,200 REV: B Page 3 QW-BBR63 Comchip Technology CO., LTD.