MINIA TURE FUSEHOLDERS INIATURE -20 Holder / No. 820 820-20 Panel Mount, Shocksafe 5x20mm Fuses Specifications Packaging 0 bulk (100 pcs.) Standard IEC 60127-6 UL 512 0,5 Approvals (only 820/835) 7,62 M12,7x1,5 4,45 Fuse carrier inserted max. 0,2 Mounting 12.7mm diameter D-hole or double D-hole Admissible torque on plastic hex nut is 1.2Nm Bayonet-joint 4,8 ∅16 ∅15 12 -0,1 11,7 -0,15 12,7 -0,1 SW14 3,2 2,5 Solderable or 4.8mm quick connect-fits 0.5mm tab Protection Class & Category IP 40 (IEC 60529) PC2 (IEC 60127-6) Materials Holder/Cap: 5,5 1...6 5 32 12,7 -0,1 Te r m i n a l s 8 Metal Parts: Panel alternatives Terminals: Nut: White Thermoplastic PBT, UL94 V-0 Copper alloy, corrosion protected Solderable, tinned Thermoplastics, Polyamid PA 6.6, black, UL94 V-0 Electrical Data (23ºC) Rated Voltage: 250V Rated Current: 6.3A (VDE/SEMKO) 16A (UL) Rated Power: 2.5W (SEMKO) Operating TTemperature emperature -25ºC to +70ºC (consider de-rating) Climatic TTest est -25ºC/+70ºC/21 days (IEC 60068-2-1...3) Cap / No. 835-20 Stock Conditions +10ºC to +60ºC relative humidity ≤ 75% yearly average, without dew, maximum value for 30 days - 95% Bayonet-connector-nose Vibration Resistance max. 20,6 24 cycles at 15 min. each (IEC 60068-2-6) 10 - 60Hz at 0.75mm amplitude 60 - 2000Hz at 10g acceleration Contact Resistance 7 ∅ 9,2 1,5 ≤ 5mΩ 1,2 Flush Mount TType ype Slot for screwdriver Dielectric Strength > 1.5 kV Impulse Voltage 4 kV with 1,2µs/50µs Insulation Resistance > 10 MΩ (500 VDC, 1 min.) Solderability 235 ºC, 2 sec. (soldering bath) (IEC 60068-2-20) 350 ºC, 3 sec. (soldering iron) (IEC 60068-2-20) Soldering Heat Resistance 260ºC, 5 sec. (IEC 60068-2-20) Minimum Cross Section Conductor - 2.5mm 2 Marking 820, 250V, Approvals Unit Weight Order Info Qty. Order Number Series 0000 02 Packaging 0 Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand. 050906 In our continuing strategy to deliver unparalleled circuit protection solutions, technical expertise and application leadership, we proudly introduce the WICKMANN Group and its products to the Littelfuse portfolio. 4.0g (820) / 1.6g (835) Specifications are subject to change without notice WebSite www.littelfuse.com