Data Sheet No. PD60177 Rev. E IR4426/IR4427/IR4428(S) & (PbF) DUAL LOW SIDE DRIVER Features • Gate drive supply range from 6 to 20V • CMOS Schmitt-triggered inputs • Matched propagation delay for both channels • Outputs out of phase with inputs (IR4426) • Outputs in phase with inputs (IR4427) • OutputA out of phase with inputA and OutputB in phase with inputB (IR4428) • Also available LEAD-FREE Product Summary IO+/- 1.5A / 1.5A VOUT 6V - 20V ton/off (typ.) 85 & 65 ns Descriptions The IR4426/IR4427/IR4428 (S) is a low voltage, high speed power MOSFET and IGBT driver. Proprietary latch immune CMOS technologies enable ruggedized monolithic construction. Logic inputs are compatible with standard CMOS or LSTTL outputs. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays between two channels are matched. Packages 8 Lead PDIP 8 Lead SOIC Block Diagram 1 2 3 4 www.irf.com NC NC INA OUTA IR442x GND INB Vs OUTB 8 7 TO LOAD 6 5 1 IR4426/IR4427/IR4428(S) & (PbF) ADVANCE INFORMATION Absolute Maximum Ratings Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to GND. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Symbol Definition Min. Max. Units VS Fixed supply voltage -0.3 25 VO Output voltage -0.3 VS + 0.3 VIN Logic input voltage -0.3 VS + 0.3 PD Package power dissipation @ TA ≤ +25°C RthJA (8 Lead PDIP) — 1.0 (8 lead SOIC) — 0.625 (8 lead PDIP) — 125 (8 lead SOIC) — 200 Thermal resistance, junction to ambient TJ Junction temperature — 150 TS Storage temperature -55 150 TL Lead temperature (soldering, 10 seconds) — 300 V W °C/W °C Recommended Operating Conditions The input/output logic timing diagram is shown in figure 1. For proper operation the device should be used within the recommended conditions. All voltage parameters are absolute voltages referenced to GND. Symbol Definition VS Fixed supply voltage Min. Max. 6 20 VO Output voltage 0 VS VIN Logic input voltage 0 VS TA Ambient temperature -40 125 Units V °C DC Electrical Characteristics VBIAS (VS) = 15V, TA = 25°C unless otherwise specified. The VIN, and IIN parameters are referenced to GND and are applicable to input leads: INA and INB. The VO and IO parameters are referenced to GND and are applicable to the output leads: OUTA and OUTB. Symbol VIH Definition Min. Typ. Max. Units Test Conditions Logic “0” input voltage (OUTA=LO, OUTB=LO) 2.7 — — (IR4426) Logic “1” input voltage (OUTA=HI, OUTB=HI) V (IR4427) Logic “0” input voltage (OUTA=LO), Logic “1” input voltage (OUTB=HI) (IR4428) 2 www.irf.com IR4426/IR4427/IR4428(S) & (PbF) ADVANCE INFORMATION DC Electrical Characteristics cont. VBIAS (VS) = 15V, TA = 25°C unless otherwise specified. The VIN, and IIN parameters are referenced to GND and are applicable to input leads: INA and INB. The VO and IO parameters are referenced to GND and are applicable to the output leads: OUTA and OUTB. Symbol VIL Definition Min. Typ. Max. Units Test Conditions Logic “1” input voltage (OUTA=HI, OUTB=HI) — — 0.8 (IR4426) Logic “0” input voltage (OUTA=LO, OUTB=LO) (IR4427) Logic “I” input voltage (OUTA=HI), V Logic “0” input voltage (OUTB=LO) (IR4428) VOH High level output voltage, VBIAS-VO VOL Low level output voltage, VO IIN+ Logic “1” input bias current (OUT=HI) — — 1.2 — — 0.1 — 5 15 VIN = 0V (IR4426) VIN = VS (IR4427) VINA = 0V (IR4428) VINB = VS (IR4428) IIN- Logic “0” input bias current (OUT=LO) — -10 -30 µA VIN = VS (IR4426) VIN = 0V (IR4427) VINA = VS (IR4428) VINB = 0V (IR4428) IQS Quiescent Vs supply current — 100 200 VIN = 0V or VS IO+ Output high short circuit pulsed current 1.5 2.3 — VO = 0V, VIN = 0 (IR4426) VO = 0V, VIN = VS (IR4427) VO = 0V, VINA = 0 (IR4428) VO = 0V, VINB = VS A IO- Output low short circuit pulsed current 1.5 3.3 — (IR4428) PW ≤ 10 µs VO = 15V, VIN = VS (IR4426) VO = 15V, VIN = 0 (IR4427) VO = 15V, VINA = VS (IR4428) VO = 15V, VINB = 0 (IR4428) PW ≤ 10 µs www.irf.com 3 IR4426/IR4427/IR4428(S) & (PbF) ADVANCE INFORMATION AC Electrical Characteristics VBIAS (VS) = 15V, CL = 1000pF, TA = 25oC unless otherwise specified. Symbol Definition Propagation delay characteristics Min. Typ. Max. Units Test Conditions td1 Turn-on propagation delay — 85 160 td2 Turn-off propagation delay — 65 150 tr Turn-on rise time — 15 35 tf Turn-off fall time — 10 25 ns figure 4 Functional Block Diagram IR4426 5V Vs INA PREDRV OUTA DRV 5V Vs INB PREDRV DRV OUTB GND 4 www.irf.com IR4426/IR4427/IR4428(S) & (PbF) ADVANCE INFORMATION Functional Block Diagram IR4427 Vs INA PREDRV OUTA DRV Vs INB PREDRV DRV OUTB GND www.irf.com 5 IR4426/IR4427/IR4428(S) & (PbF) ADVANCE INFORMATION Functional Block Diagram IR4428 5V Vs INA PREDRV OUTA DRV Vs INB PREDRV DRV OUTB GND Lead Definitions Symbol Description VS 6 Supply voltage GND Ground INA Logic input for gate driver output (OUTA), out of phase (IR4426, IR4428), in phase (IR4427) INB Logic input for gate driver output (OUTB), out of phase (IR4426), in phase (IR4427, IR4428) OUTA Gate drive output A OUTB Gate drive output B www.irf.com IR4426/IR4427/IR4428(S) & (PbF) ADVANCE INFORMATION Lead Assignments INA OUTA GND INB VS OUTB 8 Lead PDIP OUTA INA VS GND OUTB INB 8 Lead PDIP IR4426 OUTA INA VS V S GND INB OUTB 8 Lead PDIP IR4427 IR4428 Part Number Lead Assignments INA OUTA GND INB VS OUTB 8 Lead SOIC IR4426S OUTA INA VS GND INB OUTB OUTA INA VS V S GND INB OUTB 8 Lead SOIC 8 Lead SOIC IR4427S IR4428S Part Number www.irf.com 7 IR4426/IR4427/IR4428(S) & (PbF) ADVANCE INFORMATION INA (IR4426, IR4428) INB (IR4426) INA (IR4427) INB (IR4427, IR4428) OUTA OUTB Figure 3. Timing Diagram INA (IR4426, IR4428) INB (IR4426) INA (IR4427) INB (IR4427, IR4428) td1 tr td2 tf OUTA OUTB Figure 4. Switching Time Waveforms 8 www.irf.com IR4426/IR4427/IR4428(S) & (PbF) ADVANCE INFORMATION VS = 15V VS = 15V 6 6 4.7UF 0.1UF INA 4.7UF 0.1UF INA 2 7 7 2 OUTA OUTA CL = 1000PF CL = 1000PF INB INB 4 5 5 4 OUTB OUTB CL = 1000PF CL = 1000PF VS = 15V 3 IR4426 6 3 IR4427 4.7UF 0.1UF INA 2 7 OUTA CL = 1000PF INB 4 5 OUTB CL = 1000PF 3 IR4428 Figure 5. Switching Time Test Circuits www.irf.com 9 IR4426/IR4427/IR4428(S) & (PbF) ADVANCE INFORMATION Caseoutline 8 Lead PDIP 01-3003 01 Tape & Reel 10 www.irf.com IR4426/IR4427/IR4428(S) & (PbF) ADVANCE INFORMATION Case Outline - 8 Lead SOIC (MS-012AA) 01-0021 09 www.irf.com 11 IR4426/IR4427/IR4428(S) & (PbF) ADVANCE INFORMATION LEADFREE PART MARKING INFORMATION IRxxxxxx Part number YWW? Date code ?XXXX Pin 1 Identifier ? P IR logo MARKING CODE Lead Free Released Non-Lead Free Released Lot Code (Prod mode - 4 digit SPN code) Assembly site code Per SCOP 200-002 ORDER INFORMATION Basic Part (Non-Lead Free) 8-Lead PDIP IR4426 order 8-Lead SOIC IR4426S order 8-Lead PDIP IR4427 order 8-Lead SOIC IR4427S order 8-Lead PDIP IR4428 order 8-Lead SOIC IR4428S order IR4426 IR4426S IR4427 IR4427S IR4428 IR4428S Leadfree Part 8-Lead PDIP IR4426 8-Lead SOIC IR4426S 8-Lead PDIP IR4427 8-Lead SOIC IR4427S 8-Lead PDIP IR4428 8-Lead SOIC IR4428S order order order order order order IR4426PbF IR4426SPbF IR4427PbF IR4427SPbF IR4428PbF IR4428SPbF IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 This product has been qualified per industrial level Data and specifications subject to change without notice. 4/13/2004 12 www.irf.com