Bulletin I2105 rev. D 12/98 SAFEIR Series 16TTS..S SURFACE MOUNTABLE PHASE CONTROL SCR VT < 1.4V @ 10A ITSM = 200A Description/Features The 16TTS..S SAFE IR series of silicon controlled rectifiers are specifically designed for medium power switching and phase control applications. The glass passivation technology used has reliable operation up to 125° C junction temperature. VRRM = 800 to 1600V Typical applications are in input rectification (soft start) and these products are designed to be used with International Rectifier input diodes, switches and output rectifiers which are available in identical package outlines. Output Current in Typical Applications Applications Single-phase Bridge Three-phase Bridge Units NEMA FR-4 or G10 glass fabric-based epoxy with 4 oz (140µm) copper 2.5 3.5 Aluminum IMS, RthCA = 15°C/W 6.3 9.5 14.0 18.5 Aluminum IMS with heatsink, RthCA = 5°C/W TA = 55°C, TJ = 125°C, footprint 300mm2 Major Ratings and Characteristics Characteristics IT(AV) A Sinusoidal Package Outline 16TTS..S Units 10 A 16 A up to 1600 V 200 A waveform IRMS VRRM/ VDRM ITSM 1.4 V dv/dt VT @ 10 A, TJ = 25°C 500 V/µs di/dt 150 A/µs - 40 to 125 °C TJ www.irf.com D2 PAK (SMD-220) 1 16TTS.. S SAFEIR Series Bulletin I2105 rev. D 12/98 Voltage Ratings VRRM, maximum VDRM , maximum IRRM/IDRM peak reverse voltage peak direct voltage 125°C V V mA 16TTS08S 800 800 10 16TTS12S 1200 1200 16TTS16S 1600 1600 Part Number Absolute Maximum Ratings Parameters 16TTS..S IT(AV) Max. Average On-state Current 10 A IRMS Max. RMS On-state Current 16 ITSM Max. Peak One Cycle Non-Repetitive 170 Surge Current 200 2 2 10ms Sine pulse, no voltage reapplied 2 As 10ms Sine pulse, rated VRRM applied t = 0.1 to 10ms, no voltage reapplied Max. I t for fusing 144 I2 √t Max. I2 √t for fusing 2000 A2 √s VTM Max. On-state Voltage Drop 1.4 V rt On-state slope resistance 24.0 mΩ 200 10ms Sine pulse, no voltage reapplied VT(TO) Threshold Voltage 1.1 V IRM/IDM Max.Reverse and Direct 0.5 mA Leakage Current 10 IL Holding Current @ 10A, TJ = 25°C TJ = 125°C TJ = 25 °C TJ = 125 °C Typ. Max. -- 100 100 150 VR = rated VRRM/ VDRM Anode Supply = 6V, Resistive load, Initial IT=1A mA 16TTS08S, 16TTS12S 16TTS16S 200 mA dv/dt Max. Rate of Rise of off-state Voltage 500 V/µs di/dt Max. Rate of Rise of turned-on Current 150 A/µs 2 Max. Latching Current @ TC = 98° C, 180° conduction half sine wave 10ms Sine pulse, rated VRRM applied It IH Conditions Units Anode Supply = 6V, Resistive load www.irf.com 16TTS.. S SAFEIR Series Bulletin I2105 rev. D 12/98 Triggering Parameters PGM Max. peak Gate Power 16TTS..S Units 8.0 W PG(AV) Max. average Gate Power 2.0 + IGM Max. paek positive Gate Current 1.5 A - VGM Max. paek negative Gate Voltage 10 V IGT 90 mA Max. required DC Gate Current to trigger VGT Max. required DC Gate Voltage Anode supply = 6V, resistive load, TJ = - 10°C 60 Anode supply = 6V, resistive load, TJ = 25°C 35 Anode supply = 6V, resistive load, TJ = 125°C 3.0 to trigger Conditions V Anode supply = 6V, resistive load, TJ = - 10°C 2.0 Anode supply = 6V, resistive load, TJ = 25°C 1.0 Anode supply = 6V, resistive load, TJ = 125°C VGD Max. DC Gate Voltage not to trigger 0.25 IGD Max. DC Gate Current not to trigger 2.0 mA TJ = 125°C, VDRM = rated value 16TTS..S Units 0.9 µs TJ = 125°C, VDRM = rated value Switching Parameters tgt Typical turn-on time trr Typical reverse recovery time tq Typical turn-off time 4 Conditions TJ = 25°C TJ = 125°C 110 Thermal-Mechanical Specifications Parameters 16TTS..S Units TJ Max. Junction Temperature Range - 40 to 125 °C Tstg Max. Storage Temperature Range - 40 to 125 °C 240 °C 1.3 °C/W 40 °C/W 2 (0.07) g (oz.) Soldering Temperature RthJC Max. Thermal Resistance Junction to Case RthJA Typ. Thermal Resistance Junction Conditions for 10 seconds (1.6mm from case) DC operation to Ambient (PCB Mount)** wt Approximate Weight T Case Style D2 Pak (SMD-220) **When mounted on 1" square (650mm2) PCB of FR-4 or G-10 material 4 oz (140µm) copper 40°C/W For recommended footprint and soldering techniques refer to application note #AN-994 www.irf.com 3 16TTS.. S SAFEIR Series 16TTS.. Series R thJC (DC) = 1.3 °C/W 120 115 Conduction Angle 110 105 100 30° 60° 95 90° 120° 180° 90 0 2 4 6 8 10 12 Maximum Allowable Case Temperature (°C) 125 125 16TTS.. Series R thJC(DC) = 1.3 °C/W 120 115 Conduction Period 110 105 100 30° 90° 120° 0 2 4 6 8 10 12 14 16 Fig. 1 - Current Rating Characteristics Fig. 2 - Current Rating Characteristics 18 180° 120° 90° 60° 30° 16 14 12 RMS Limit 10 8 Conduction Angle 6 16TTS.. Series T J = 125°C 4 2 0 0 1 2 3 4 5 6 7 8 9 10 11 25 DC 180° 120° 90° 60° 30° 20 15 RMS Limit 10 Conduction Period 5 16TTS.. Series T J = 125°C 0 0 2 Average On-state Current (A) 180 140 120 100 16TTS..Series 80 1 10 6 8 10 12 14 16 18 Average On-state Current (A) At Any Rated Load Condition And With Rated V RRMApplied Following Surge. Initial T J = 125°C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 160 4 100 Number Of Equal Amplitude Half C ycle Current Pulses (N) Fig. 6 - Maximum Non-Repetitive Surge Current Fig. 4 - On-state Power Loss Characteristics Peak Half Sine Wave Forward Current (A) Peak Half Sine Wave On-state Current (A) 180° DC 90 Average On-state Current (A) Fig. 3 - On-state Power Loss Characteristics 4 60° 95 Average On-state Current (A) Max imum Average On-state Power Loss (W) Max imum Average On-state Power Loss (W) Maximum Allowable Case Temperature (°C) Bulletin I2105 rev. D 12/98 200 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial T J = 125°C No Voltage Reapplied Rated VRRM Reapplied 180 160 140 120 100 16TTS.. Series 80 0.01 0.1 1 Pulse Train Duration (s) Fig. 7 - Maximum Non-Repetitive Surge Current www.irf.com 16TTS.. S SAFEIR Series Bulletin I2105 rev. D 12/98 Instantaneous On-state Current (A) 1000 16TTS.. Series 100 10 T = 25°C J T J= 125°C 1 0 1 2 3 4 5 Instantaneous On-st ate Voltage (V) Transient Thermal Impedance Z thJC (°C/W) Fig. 7 - On-state Voltage Drop Characteristics 10 Steady State Value (DC Operation) 1 D= D= D= D= D= 0.50 0.33 0.25 0.17 0.08 0.1 Single Pulse 16TTS.. Series 0.01 0.0001 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristics Rectangular gate pulse a)Recommended load line for rated di/dt: 10 V, 20 ohms tr = 0.5 µs, tp >= 6 µs b)Recommended load line for <= 30% rated di/dt: 10 V, 65 ohms 10 tr = 1 µs, tp >= 6 µs (1) PGM = 40 , tp = 1 ms (2) PGM = 20 W, tp = 2 ms (3) PGM = 8 W, tp = 5 ms (4) PGM = 4 W, tp = 10 ms (a) (b) VGD IGD 0.1 0.001 TJ = -10 °C TJ = 125 °C 1 TJ = 25 °C Instantaneous Gate Voltage (V) 100 (4) 16TTS.. Series 0.01 0.1 (3) (2) (1) Frequency Limited by PG(AV) 1 10 100 Instantaneous Gate Current (A) Fig. 9 - Gate Characteristics www.irf.com 5 16TTS.. S SAFEIR Series Bulletin I2105 rev. D 12/98 Marking Information EXAMPLE: THIS IS AN 16TTS16S (A) INTERNATIONAL PART NUMBER RECTIFIER LOGO 16TTS16S 9G3A 9512 ASSEMBLY DATE CODE (YYWW) LOT CODE (K) (G) YY = YEAR WW = WEEK Tape & Reel Information TRR 1.60 (0.063) 1.50 (0.059) 4.10 (0.161) 3.90 (0.153) FEED DIRECTION 1.85 (0.073) 1.65 (0.065) 1.60 (0.063) 1.50 (0.059) DIA. 0.368 (0.0145) 0.342 (0.0135) 11.60 (0.457) 11.40 (0.449) 15.42 (0.609) 15.22 (0.601) TRL 1.75 (0.069) 10.90 (0.429) 10.70 (0.421) 1.25 (0.049) 24.30 (0.957) 23.90 (0.941) DIA. 16.10 (0.634) 4.72 (0.186) 4.52 (0.178) 15.90 (0.626) FEED DIRECTION Dimensions in millimeters and inches 13.50 (0.532) 12.80 (0.504) DIA. 26.40 (1.039) 24.40 (0.961) SMD-220 Tape & Reel When orderi ng, indicate the part number, part orientation, and the quantity. Quantities are in multiples 360 (14.173) DIA. MAX. 6 60 (2.362) DIA. MIN. of 800 pieces per reel for both TRL and T RR. www.irf.com 16TTS.. S SAFEIR Series Bulletin I2105 rev. D 12/98 Outline Table 4.69 (0.18) 4.20 (0.16) 10.16 (0.40) REF. 1.32 (0.05) 1.22 (0.05) 6.47 (0.25) 93° 15.49 (0.61) 6.18 (0.24) 14.73 (0.58) 5.28 (0.21) 2.61 (0.10) 4.78 (0.19) 2.32 (0.09) 0.55 (0.02) 8.89 (0.35) 3X REF. 1.40 (0.055) 1.14 (0.045) 2X (K) (G) 1 3 1 (K) Cathode 2 (A) Anode 0.46 (0.02) 0.93 (0.37) MINIMUM RECOMMENDED F OOTPRINT 0.69 (0.27) 11.43 (0.45) 4.57 (0.18) 8.89 (0.3 5) 4.32 (0.17) 17.78 (0.70) 2 3 (G) Gate 0.61 (0.02) MAX. (A) 5.08 (0 .20) REF. 3.81 (0.15) 2.08 (0.08) 2X Dimensions in millimeters and inches 2.54 (0 .10) 2X Ordering Information Table Device Code 16 T T S 16 S TRL 1 2 3 4 5 6 7 1 - Current Rating, RMS value 2 - Circuit Configuration 3 - Package 4 - Type of Silicon 5 - Voltage code: Code x 100 = VRRM 6 - S = TO-220 D2Pak (SMD 220) Version 7 - Tape and Reel Option 2 (A) 1 (K) (G) 3 T = Single Thyristor T = TO-220AC S = Converter Grade 08 = 800V 12 = 1200V 16 = 1600V TRL = Left Reel TRR = Right Orientation Reel www.irf.com 7 16TTS.. S SAFEIR Series Bulletin I2105 rev. D 12/98 WORLD HEADQUARTERS: EUROPEAN HEADQUARTERS: IR CANADA: IR GERMANY: IR ITALY: IR FAR EAST: IR SOUTHEAST ASIA: IR TAIWAN: http://www.irf.com 8 233 Kansas St., El Segundo, California 90245 U.S.A. Tel: (310) 322 3331. Fax: (310) 322 3332. Hurst Green, Oxted, Surrey RH8 9BB, U.K. Tel: ++ 44 1883 732020. Fax: ++ 44 1883 733408. 15 Lincoln Court, Brampton, Markham, Ontario L6T3Z2. Tel: (905) 453 2200. Fax: (905) 475 8801. Saalburgstrasse 157, 61350 Bad Homburg. Tel: ++ 49 6172 96590. Fax: ++ 49 6172 965933. Via Liguria 49, 10071 Borgaro, Torino. Tel: ++ 39 11 4510111. Fax: ++ 39 11 4510220. K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171. Tel: 81 3 3983 0086. 1 Kim Seng Promenade, Great World City West Tower,13-11, Singapore 237994. Tel: ++ 65 838 4630. 16 Fl. Suite D.207, Sec. 2, Tun Haw South Road, Taipei, 10673, Taiwan. Tel: 886 2 2377 9936. Fax-On-Demand: +44 1883 733420 Data and specifications subject to change without notice. www.irf.com