IRF IRF7331PBF

PD - 95266
IRF7331PbF
HEXFET® Power MOSFET
l
l
l
l
l
Ultra Low On-Resistance
Dual N-Channel MOSFET
Surface Mount
Available in Tape & Reel
Lead-Free
Description
These N-Channel HEXFET® power MOSFETs from
International Rectifier utilize advanced processing
techniques to achieve the extremely low on-resistance
per silicon area. This benefit provides the designer
with an extremely efficient device for use in battery
and load management applications.
VDSS
RDS(on) max (mW)
ID
30@VGS = 4.5V
45@VGS = 2.5V
7.0A
5.6A
20V
S1
G1
S2
G2
1
8
D1
2
7
D1
3
6
D2
4
5
D2
SO-8
Top View
The SO-8 has been modified through a customized
leadframe for enhanced thermal characteristics and
multiple-die capability making it ideal in a variety of
power applications. With these improvements, multiple
devices can be used in an application with dramatically
reduced board space. The package is designed for
vapor phase, infrared, or wave soldering techniques.
Absolute Maximum Ratings
Parameter
VDS
ID @ TA = 25°C
ID @ TA= 70°C
IDM
PD @TA = 25°C
PD @TA = 70°C
VGS
TJ, TSTG
Drain- Source Voltage
Continuous Drain Current, VGS @ 4.5V
Continuous Drain Current, VGS @ 4.5V
Pulsed Drain Current 
Power Dissipation ƒ
Power Dissipationƒ
Linear Derating Factor
Gate-to-Source Voltage
Junction and Storage Temperature Range
Max.
Units
20
7.0
5.5
28
2.0
1.3
16
± 12
-55 to + 150
V
A
W
mW/°C
V
°C
Thermal Resistance
Symbol
RθJL
RθJA
www.irf.com
Parameter
Junction-to-Drain Lead
Junction-to-Ambient ƒ
Typ.
Max.
Units
–––
–––
20
62.5
°C/W
1
05/18/04
IRF7331PbF
Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
∆V(BR)DSS/∆TJ
Parameter
Drain-to-Source Breakdown Voltage
Breakdown Voltage Temp. Coefficient
RDS(on)
Static Drain-to-Source On-Resistance
VGS(th)
gfs
Gate Threshold Voltage
Forward Transconductance
IDSS
Drain-to-Source Leakage Current
IGSS
Gate-to-Source Forward Leakage
Gate-to-Source Reverse Leakage
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain ("Miller") Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
V(BR)DSS
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
Ciss
Coss
Crss
Min.
20
–––
–––
–––
0.6
14
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
Typ.
–––
0.013
–––
–––
–––
–––
–––
–––
–––
–––
13
3.7
2.1
7.6
22
110
50
1340
170
120
Max. Units
Conditions
–––
V
VGS = 0V, ID = 250µA
––– V/°C Reference to 25°C, ID = 1mA
30
VGS = 4.5V, ID = 7.0A ‚
mΩ
45
VGS = 2.5V, ID = 5.6A ‚
1.2
V
VDS = VGS, ID = 250µA
–––
S
VDS = 10V, ID = 7.0A
1.0
VDS = 16V, VGS = 0V
µA
25
VDS = 16V, VGS = 0V, TJ = 70°C
100
VGS = 12V
nA
-100
VGS = -12V
20
ID = 7.0A
–––
nC
VDS = 10V
–––
VGS = 4.5V
–––
VDD = 10V ‚
–––
ID = 1.0A
ns
–––
RG = 53Ω
–––
VGS = 4.5V
–––
VGS = 0V
–––
pF
VDS = 16V
–––
ƒ = 1.0MHz
Source-Drain Ratings and Characteristics
IS
ISM
VSD
trr
Qrr
Parameter
Continuous Source Current
(Body Diode)
Pulsed Source Current
(Body Diode) 
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
Min. Typ. Max. Units
–––
–––
2.0
–––
–––
28
–––
–––
–––
–––
31
15
1.2
47
23
A
V
ns
nC
Conditions
MOSFET symbol
showing the
G
integral reverse
p-n junction diode.
TJ = 25°C, IS = 2.0A, VGS = 0V
TJ = 25°C, IF = 2.0A
di/dt = 100A/µs ‚
D
S
‚
Notes:
 Repetitive rating; pulse width limited by
ƒ Surface mounted on 1 in square Cu board
max. junction temperature.
‚ Pulse width ≤ 400µs; duty cycle ≤ 2%.
2
www.irf.com
IRF7331PbF
1000
100
VGS
7.5V
4.5V
3.5V
3.0V
2.5V
2.0V
1.75V
BOTTOM 1.5V
I D , Drain-to-Source Current (A)
I D , Drain-to-Source Current (A)
100
10
1.50V
1
20µs PULSE WIDTH
TJ = 25 °C
0.1
0.1
1
10
10
1.50V
2.0
RDS(on) , Drain-to-Source On Resistance
(Normalized)
I D , Drain-to-Source Current (A)
TJ = 25 ° C
TJ = 150 ° C
10
V DS = 15V
20µs PULSE WIDTH
2.5
Fig 3. Typical Transfer Characteristics
www.irf.com
10
100
Fig 2. Typical Output Characteristics
100
2.0
1
VDS , Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
VGS , Gate-to-Source Voltage (V)
20µs PULSE WIDTH
TJ = 150 °C
1
0.1
100
VDS , Drain-to-Source Voltage (V)
1
1.5
VGS
7.5V
4.5V
3.5V
3.0V
2.5V
2.0V
1.75V
BOTTOM 1.5V
TOP
TOP
3.0
ID = 7.0A
1.5
1.0
0.5
0.0
-60 -40 -20
VGS = 4.5V
0
20
40
60
80 100 120 140 160
TJ , Junction Temperature ( °C)
Fig 4. Normalized On-Resistance
Vs. Temperature
3
IRF7331PbF
8
VGS = 0V,
f = 1 MHZ
Ciss = Cgs + Cgd, Cds SHORTED
Crss = Cgd
2000
C, Capacitance(pF)
Coss = Cds + Cgd
1600
Ciss
1200
800
400
Coss
ID = 7.0A
VDS = 10V
VGS , Gate-to-Source Voltage (V)
2400
6
4
2
Crss
0
0
1
10
0
100
4
VDS, Drain-to-Source Voltage (V)
100
ID, Drain-to-Source Current (A)
ISD , Reverse Drain Current (A)
100
10
TJ = 150 ° C
1
TJ = 25 ° C
V GS = 0 V
0.4
0.6
0.8
1.0
VSD ,Source-to-Drain Voltage (V)
Fig 7. Typical Source-Drain Diode
Forward Voltage
4
12
16
20
Fig 6. Typical Gate Charge Vs.
Gate-to-Source Voltage
Fig 5. Typical Capacitance Vs.
Drain-to-Source Voltage
0.1
0.2
8
QG , Total Gate Charge (nC)
1.2
OPERATION IN THIS AREA
LIMITED BY R DS(on)
10
100µsec
1msec
1
10msec
0.1
Tc = 25°C
Tj = 150°C
Single Pulse
0.1
1
10
100
VDS , Drain-toSource Voltage (V)
Fig 8. Maximum Safe Operating Area
www.irf.com
IRF7331PbF
8.0
RD
VDS
I D , Drain Current (A)
VGS
6.0
RG
D.U.T.
+
-V DD
VGS
4.0
Pulse Width ≤ 1 µs
Duty Factor ≤ 0.1 %
Fig 10a. Switching Time Test Circuit
2.0
VDS
90%
0.0
25
50
75
100
125
150
TC , Case Temperature ( °C)
10%
VGS
Fig 9. Maximum Drain Current Vs.
Case Temperature
td(on)
tr
t d(off)
tf
Fig 10b. Switching Time Waveforms
Thermal Response (Z thJA )
100
D = 0.50
0.20
10
0.10
0.05
0.02
PDM
0.01
1
t1
SINGLE PULSE
(THERMAL RESPONSE)
0.1
0.00001
t2
Notes:
1. Duty factor D = t 1 / t 2
2. Peak T J = P DM x Z thJA + TA
0.0001
0.001
0.01
0.1
1
10
t1, Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Ambient
www.irf.com
5
0.05
RDS (on) , Drain-to-Source On Resistance (Ω)
RDS(on) , Drain-to -Source On Resistance (Ω)
IRF7331PbF
0.04
0.03
ID = 7.0A
0.02
0.01
2.0
4.0
6.0
8.0
0.12
0.10
0.08
0.06
VGS = 2.5V
0.04
0.02
VGS = 4.5V
0.00
0
5
VGS, Gate -to -Source Voltage (V)
Fig 12. Typical On-Resistance Vs.
Gate Voltage
10
15
20
25
30
ID , Drain Current (A)
Fig 13. Typical On-Resistance Vs.
Drain Current
Current Regulator
Same Type as D.U.T.
QG
50KΩ
12V
.2µF
.3µF
VGS
QGS
QGD
D.U.T.
+
V
- DS
VGS
VG
3mA
Charge
IG
ID
Current Sampling Resistors
Fig 14a. Basic Gate Charge Waveform
6
Fig 14b. Gate Charge Test Circuit
www.irf.com
1.2
60
1.1
50
1.0
40
Power (W)
VGS(th) Gate threshold Voltage (V)
IRF7331PbF
ID = 250µA
0.9
0.8
30
20
0.7
10
0.6
0
0.5
-75
-50
-25
0
25
50
75
100
T J , Temperature ( °C )
Fig 15. Typical Vgs(th) Vs.
Junction Temperature
www.irf.com
125
150
0.0001
0.0010
0.0100
0.1000
1.0000 10.0000 100.0000
Time (sec)
Fig 16. Typical Power Vs. Time
7
IRF7331PbF
SO-8 Package Outline
Dimensions are shown in millimeters (inches)
D
5
A
8
6
7
6
5
H
E
0.25 [.010]
1
2
3
A
4
e
e1
MAX
MIN
A
.0532
.0688
1.35
1.75
C
A1
.0040
.0098
0.10
0.25
b
.013
.020
0.33
0.51
c
.0075
.0098
0.19
0.25
D
.189
.1968
4.80
5.00
E
.1497
.1574
3.80
4.00
e
.050 BASIC
1.27 BASIC
.025 BASIC
0.635 BAS IC
H
.2284
.2440
5.80
6.20
K
.0099
.0196
0.25
0.50
L
.016
.050
0.40
1.27
y
0°
8°
0°
8°
y
0.10 [.004]
0.25 [.010]
MAX
K x 45°
A
8X b
MILLIMET ERS
MIN
e1
6X
INCHES
DIM
B
A1
8X L
8X c
7
C A B
F OOT PRINT
NOT E S :
1. DIMENS IONING & T OLERANCING PER AS ME Y14.5M-1994.
8X 0.72 [.028]
2. CONT ROLLING DIMENS ION: MILLIMET E R
3. DIMENS IONS ARE S HOWN IN MILLIME T ERS [INCHES ].
4. OUT LINE CONFORMS T O JEDE C OUT LINE MS -012AA.
5 DIMENS ION DOE S NOT INCLUDE MOLD PROT RUS IONS .
MOLD PROT RUS IONS NOT T O E XCEED 0.15 [.006].
6 DIMENS ION DOE S NOT INCLUDE MOLD PROT RUS IONS .
MOLD PROT RUS IONS NOT T O E XCEED 0.25 [.010].
6.46 [.255]
7 DIMENS ION IS T HE LENGT H OF LEAD FOR S OLDERING T O
A S UBS T RAT E.
3X 1.27 [.050]
8X 1.78 [.070]
SO-8 Part Marking
EXAMPLE: T HIS IS AN IRF 7101 (MOS F ET )
INT ERNAT IONAL
RECT IFIER
LOGO
XXXX
F7101
DAT E CODE (YWW)
P = DE S IGNAT E S LEAD-FRE E
PRODUCT (OPT IONAL)
Y = LAS T DIGIT OF T HE YEAR
WW = WEEK
A = AS S EMBLY S IT E CODE
LOT CODE
PART NUMBER
8
www.irf.com
IRF7331PbF
SO-8 Tape and Reel
TERMINAL NUMBER 1
12.3 ( .484 )
11.7 ( .461 )
8.1 ( .318 )
7.9 ( .312 )
FEED DIRECTION
NOTES:
1. CONTROLLING DIMENSION : MILLIMETER.
2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS(INCHES).
3. OUTLINE CONFORMS TO EIA-481 & EIA-541.
330.00
(12.992)
MAX.
14.40 ( .566 )
12.40 ( .488 )
NOTES :
1. CONTROLLING DIMENSION : MILLIMETER.
2. OUTLINE CONFORMS TO EIA-481 & EIA-541.
Data and specifications subject to change without notice.
This product has been designed and qualified for the Consumer market.
Qualification Standards can be found on IR’s Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information.05/04
www.irf.com
9