Bulletin PD-21018 rev. A 07/06
30CTQ...SPbF
30CTQ...-1PbF
30 Amp
SCHOTTKY RECTIFIER
IF(AV) = 30Amp
VR = 50 - 60V
Major Ratings and Characteristics
Description/ Features
Characteristics
Values
Units
IF(AV) Rectangular
30
A
50 - 60
V
IFSM @ tp = 5 μs sine
1000
A
VF
@ 15 Apk, TJ = 125°C
0.56
V
TJ
range
- 55 to 150
°C
waveform
VRRM
(per leg)
This center tap Schottky rrectifier has been optimized for very
low forward voltage drop, with moderate leakage. The
proprietary barrier technology allows for reliable operation
up to 150° C junction temperature. Typical applications are
in switching power supplies, converters, free-wheeling
diodes, and reverse battery protection.
150° C TJ operation
Center tap configuration
Very low forward voltage drop
High purity, high temperature epoxy encapsulation for
enhanced mechanical strength and moisture resistance
High frequency operation
Guard ring for enhanced ruggedness and long term
reliability
Lead-Free ("PbF" suffix)
Case Styles
30CTQ...SPbF
30CTQ...-1PbF
Base
Common
Cathode
Base
Common
Cathode
2
1
Anode
2
Common
Cathode
D2PAK
www.irf.com
2
3
Anode
1
Anode
2
Common
Cathode
3
Anode
TO-262
1
30CTQ...SPbF, 30CTQ...-1PbF
Bulletin PD-21018 rev. A 07/06
Voltage Ratings
Parameters
VR
30CTQ050SPbF
30CTQ050-1PbF
30CTQ060SPbF
30CTQ060-1PbF
50
60
Max. DC Reverse Voltage (V)
VRWM Max. Working Peak Reverse Voltage (V)
Absolute Maximum Ratings
Parameters
IF(AV) Max. Average Forward
Current
IFSM
* See Fig. 5
Values
Units
(Per Leg)
15
A
(Per Device)
30
Max. Peak One Cycle Non-Repetitive
1000
Surge Current (Per Leg)
260
* See Fig. 7
EAS
Non-Repetitive Avalanche Energy
(Per Leg)
IAR
Repetitive Avalanche Current
(Per Leg)
A
Conditions
50% duty cycle @ TC = 105°C, rectangular wave form
Following any rated
load condition and with
10ms Sine or 6ms Rect. pulse rated VRRM applied
5μs Sine or 3μs Rect. pulse
13
mJ
TJ = 25 °C, I AS = 1.50 Amps, L = 11.5 mH
1.50
A
Values
Units
0.62
0.82
0.56
V
V
V
@ 15A
@ 30A
@ 15A
0.71
V
@ 30A
0.80
mA
TJ = 25 °C
45
mA
TJ = 125 °C
TJ = TJ max.
Current decaying linearly to zero in 1 μsec
Frequency limited by TJ max. VA = 1.5 x VR typical
Electrical Specifications
Parameters
VFM
IRM
Max. Forward Voltage Drop
(Per Leg) * See Fig. 1
(1)
Max. Reverse Leakage Current
(Per Leg) * See Fig. 2
(1)
Conditions
TJ = 25 °C
TJ = 125 °C
VR = rated VR
VF(TO) Threshold Voltage
0.39
V
rt
Forward Slope Resistance
8.47
mΩ
CT
Max. Junction Capacitance (Per Leg)
720
pF
VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C
LS
Typical Series Inductance (Per Leg)
8.0
nH
Measured lead to lead 5mm from package body
dv/dt Max. Voltage Rate of Change
10000
V/ μs (Rated VR)
(1) Pulse Width < 300μs, Duty Cycle <2%
Thermal-Mechanical Specifications
Parameters
Values
Units
TJ
Max. Junction Temperature Range
-55 to 150
°C
Tstg
Max. Storage Temperature Range
-55 to 150
Conditions
°C
RthJC Max. Thermal Resistance Junction
to Case (Per Leg)
3.25
°C/W DC operation
RthJC Max. Thermal Resistance Junction
to Case (Per Package)
1.63
°C/W DC operation
RthCS Typical Thermal Resistance, Case
to Heatsink
0.50
°C/W Mounting surface , smooth and greased
wt
Approximate Weight
T
Mounting Torque
Marking Device
2
2 (0.07)
g (oz.)
Min.
6 (5)
Max.
12 (10)
Kg-cm
(Ibf-in)
30CTQ...S
Case style D2Pak
30CTQ...-1
Case style TO-262
www.irf.com
30CTQ...SPbF, 30CTQ...-1PbF
Bulletin PD-21018 rev. A 07/06
1000
Reverse Current - IR (mA)
1000
TJ = 125°C
100
125°C
10
100°C
1
75°C
0.1
50°C
25°C
0.01
TJ = 25°C
0.001
0
10
20
30
40
50
60
Reverse Voltage - VR (V)
Fig. 2 - Typical Values Of Reverse Current
Vs. Reverse Voltage (Per Leg)
1000
Junction Capacitanc e - C T (pF)
Instanta neous Forward Current - IF (A)
TJ = 150°C
TJ = 150°C
100
10
1
TJ = 25°C
100
0
0.4
0.8
1.2
1.6
2
0
10
20
30
40
50
60
Reverse Voltag e - VR (V)
Forward Voltage Drop - V FM (V)
Fig. 1 - Max. Forward Voltage Drop
Characteristics (Per Leg)
Fig. 3 - Typical Junction Capacitance
Vs. Reverse Voltage (Per Leg)
Thermal Impedance Z thJC (°C/ W)
10
1
D = 0.75
D = 0.50
D = 0.33
0.1 D = 0.25
D = 0.20
P
DM
0.01
Notes:
Single Pulse
(Thermal Resistance)
0.001
0.00001
0.0001
0.001
0.01
t1
t2
1. Duty fac tor D = t 1/ t 2
2. Peak TJ = PDM x Z thJC+ TC
0.1
1
10
100
t 1 , Rectangular Pulse Duration (Seconds)
Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg)
www.irf.com
3
30CTQ...SPbF, 30CTQ...-1PbF
Bulletin PD-21018 rev. A 07/06
14
150
Average Power Loss - (Watts)
Allowable Case Temperature - (°C)
160
140
130
DC
120
110
Square wave (D = 0.50)
80% Ra ted VR a p plied
100
90
80
70
60
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
12
10
8
DC
RMS Limit
6
4
2
see note (2)
0
5
10
15
20
0
25
0
Average Forward Current - I F(AV) (A)
Fig. 5 - Max. Allowable Case Temperature
Vs. Average Forward Current (Per Leg)
Non-Repetitive Surge Current - I FSM (A)
5
10
15
20
25
Average Forward Current - I F(AV) (A)
Fig. 6 - Forward Power Loss Characteristics
(Per Leg)
1000
At Any Rated Load Condition
And With Rated VRRM Applied
Following Surge
100
10
100
1000
10000
Square Wave Pulse Duration - t p (microsec)
Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg)
L
IRFP460
DUT
Rg = 25 ohm
CURRENT
MONITOR
HIGH-SPEED
SWITCH
FREE-WHEEL
DIODE
+
Vd = 25 Volt
40HFL40S02
Fig. 8 - Unclamped Inductive Test Circuit
(2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ;
Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6);
PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 10 V
4
www.irf.com
30CTQ...SPbF, 30CTQ...-1PbF
Bulletin PD-21018 rev. A 07/06
Outlines Table
Conform to JEDEC outline D2Pak (SMD-220)
Dimensions in millimeters and (inches)
Modified JEDEC outline TO-262
Dimensions in millimeters and (inches)
www.irf.com
5
30CTQ...SPbF, 30CTQ...-1PbF
Bulletin PD-21018 rev. A 07/06
Part Marking Information
D2PAK
THIS IS A 30CTQ060S
LOT CODE 8024
ASSEMBLED ON WW 02, 2000
INTERNATIONAL
RECTIFIER
LOGO
PART NUMBER
30CTQ060S
DATE CODE
ASSEMBLY
LOT CODE
TO-262
EXAMPLE: THIS IS A 430CTQ060-1
LOT CODE 1789
ASSEMBLED ON WW 19, 1999
INTERNATIONAL
RECTIFIER
LOGO
ASSEMBLY
LOT CODE
YEAR 0 = 2000
WEEK 02
P = LEAD-FREE
PART NUMBER
DATE CODE
YEAR 9 = 1999
WEEK 19
P = LEAD-FREE
Tape & Reel Information
Dimensions in millimeters and (inches)
6
www.irf.com
30CTQ...SPbF, 30CTQ...-1PbF
Bulletin PD-21018 rev. A 07/06
Ordering Information Table
Device Code
30
C
T
Q
060
S
1
2
3
4
5
6
1
-
Current Rating (30A)
2
-
Circuit Configuration
3
-
T = TO-220
4
-
Schottky "Q" Series
5
-
Voltage Ratings
6
-
y S = D2Pak
7
-
TRL PbF
7
8
C = Common Cathode
050 = 50V
060 = 60V
y -1= TO-262
y none = Tube (50 pieces)
y TRL = Tape & Reel (Left Oriented - for D 2Pak only)
y TRR = Tape & Reel (Right Oriented - for D 2Pak only)
8
-
y none = Standard Production
y PbF = Lead-Free
Data and specifications subject to change without notice.
This product has been designed and qualified for Industrial Level and Lead-Free.
Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 07/06
www.irf.com
7