IRF HFA04TB60PBF

PD-95733
HFA04TB60PbF
HEXFRED
Ultrafast, Soft Recovery Diode
TM
BASE
CATHODE
Features
•
•
•
•
•
•
Ultrafast Recovery
Ultrasoft Recovery
Very Low IRRM
Very Low Qrr
Specified at Operating Conditions
Lead-Free
4
VF = 1.8V
Qrr * = 40nC
2
1
Benefits
VR = 600V
CATHODE
di(rec)M/dt * = 280A/µs
* 125°C
3
ANODE
2
• Reduced RFI and EMI
• Reduced Power Loss in Diode and Switching
Transistor
• Higher Frequency Operation
• Reduced Snubbing
• Reduced Parts Count
Description
International Rectifier's HFA04TB60 is a state of the art ultra fast recovery
diode. Employing the latest in epitaxial construction and advanced processing
techniques it features a superb combination of characteristics which result in
performance which is unsurpassed by any rectifier previously available. With
basic ratings of 600 volts and 8 amps per Leg continuous current, the
HFA04TB60 is especially well suited for use as the companion diode for IGBTs
and MOSFETs. In addition to ultra fast recovery time, the HEXFRED product line
features extremely low values of peak recovery current (IRRM) and does not
exhibit any tendency to "snap-off" during the tb portion of recovery. The
HEXFRED features combine to offer designers a rectifier with lower noise and
significantly lower switching losses in both the diode and the switching
transistor. These HEXFRED advantages can help to significantly reduce
snubbing, component count and heatsink sizes. The HEXFRED HFA04TB60 is
ideally suited for applications in power supplies and power conversion systems
(such as inverters), motor drives, and many other similar applications where
high speed, high efficiency is needed.
TO-220AC
Absolute Maximum Ratings
Parameter
VR
IF @ TC = 100°C
IFSM
IFRM
PD @ TC = 25°C
PD @ TC = 100°C
TJ
TSTG
www.irf.com
Cathode-to-Anode Voltage
Continuous Forward Current
Single Pulse Forward Current
Maximum Repetitive Forward Current
Maximum Power Dissipation
Maximum Power Dissipation
Operating Junction and
Storage Temperature Range
Max
Units
600
4.0
25
16
25
10
V
-55 to +150
A
W
C
1
10/18/04
HFA04TB60PbF
Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
Parameter
Min Typ Max Units
VBR
Cathode Anode Breakdown Voltage
600
V
VFM
Max Forward Voltage
IRM
Max Reverse Leakage Current
CT
Junction Capacitance
1.5
1.8
1.4
0.17
44
4.0
LS
Series Inductance
8.0
1.8
2.2
1.7
3.0
300
8.0
V
µA
pF
nH
Test Conditions
IR = 100µA
IF = 4.0A
See Fig. 1
IF = 8.0A
IF = 4.0A, TJ = 125°C
See Fig. 2
VR = V R Rated
TJ = 125°C, VR = 0.8 x VR RatedD Rated
See Fig. 3
VR = 200V
Measured lead to lead 5mm from
package body
Dynamic Recovery Characteristics @ TJ = 25°C (unless otherwise specified)
Parameter
t rr
trr1
trr2
IRRM1
IRRM2
Qrr1
Qrr2
di(rec)M /dt1
di(rec)M /dt2
Reverse Recovery Time
See Fig. 5, 6 & 16
Peak Recovery Current
See Fig. 7& 8
Reverse Recovery Charge
See Fig. 9 & 10
Peak Rate of Fall of Recovery Current
During tb
See Fig. 11 & 12
Min Typ Max Units
17
28
38
2.9
3.7
40
70
280
235
42
57
5.2
6.7
60
105
ns
A
nC
A/µs
Test Conditions
IF = 1.0A, dif /dt = 200A/µs, VR = 30V
TJ = 25°C
TJ = 125°C
I F = 4.0A
TJ = 25°C
TJ = 125°C
VR = 200V
TJ = 25°C
TJ = 125°C
dif/dt = 200A/µs
TJ = 25°C
TJ = 125°C
Thermal - Mechanical Characteristics
Parameter
Tlead
RthJC
RthA‚
RthSƒ
Lead Temperature
Thermal Resistance, Junction to Case
Thermal Resistance, Junction to Ambient
Thermal Resistance, Case to Heat Sink
Wt
Weight
T
Mounting Torque

‚
ƒ
2
Min
Typ
Max
Units
300
5.0
80
°C
K/W
12
10
g
(oz)
Kg-cm
lbf•in
0.5
2.0
0.07
6.0
5.0
0.063 in. from Case (1.6mm) for 10 sec
Typical Socket Mount
Mounting Surface, Flat, Smooth and Greased
www.irf.com
HFA04TB60PbF
1000
Reverse Current - IR (µA)
TJ = 150°C
10
T = 125°C
J
T = 25°C
TJ = 150°C
100
10
TJ = 125°C
1
0.1
TJ = 25°C
0.01
0.001
J
0
100
200
300
400
500
Reverse Voltage - V R (V)
Fig. 2 - Typical Reverse Current vs. Reverse
Voltage
1
100
0.1
0.0
1.0
2.0
3.0
4.0
5.0
6.0
Forward Voltage
Voltage Drop
Forward
Drop -- V
VFMFM
((V)
V)
Fig. 1 - Maximum Forward Voltage Drop
vs. Instantaneous Forward Current,
Junction Capacitance -CT (pF)
Instantaneous Forward Current - IF (A)
100
A
TJ = 25°C
10
1
1
10
100
1000
Reverse Voltage - V R (V)
Fig. 3 - Typical Junction Capacitance vs.
Reverse Voltage
Thermal Response (Z thJC )
10
D = 0.50
1
0.20
0.10
0.05
0.02
0.01
SINGLE PULSE
(THERMAL RESPONSE)
PDM
0.1
0.01
0.00001
t1
t2
Notes:
1. Duty factor D = t 1 / t 2
2. Peak TJ = P DM x Z thJC + TC
0.0001
0.001
0.01
0.1
1
t1 , Rectangular Pulse Duration (sec)
Fig. 4 - Maximum Thermal Impedance Zthjc Characteristics
www.irf.com
3
HFA04TB60PbF
50
14
I F = 8.0A
45
12
I F = 4.0A
VR = 200V
TJ = 125°C
TJ = 25°C
I F = 8.0A
10
I F = 4.0A
Irr- ( A)
trr- (nC)
40
35
8
6
30
4
25
2
VR = 200V
TJ = 125°C
TJ = 25°C
20
100
di f /dt - (A/µs)
0
100
1000
di f /dt - (A/µs)
1000
Fig. 6 - Typical Recovery Current vs. dif/dt
Fig. 5 - Typical Reverse Recovery vs. dif/dt
1000
200
VR = 200V
TJ = 125°C
TJ = 25°C
VR = 200V
TJ = 125°C
TJ = 25°C
160
I F = 8.0A
I F = 4.0A
Qrr- (nC)
120
di (rec) M/dt- (A /µs)
I F = 8.0A
80
I F = 4.0A
40
0
100
di f /dt - (A/µs)
Fig. 7 - Typical Stored Charge vs. dif/dt
4
1000
100
100
A
di f /dt - (A/µs)
1000
Fig. 8 - Typical di(rec)M/dt vs. dif/dt,
www.irf.com
HFA04TB60PbF
3
t rr
IF
REVERSE RECOVERY CIRCUIT
tb
ta
0
Q rr
VR = 200V
2
I RRM
4
0.5 I RRM
di(rec)M/dt
0.01 Ω
0.75 I RRM
L = 70µH
D.U.T.
dif/dt
ADJUST
D
G
IRFP250
S
Fig. 9 - Reverse Recovery Parameter Test
Circuit
www.irf.com
5
1
di f /dt
1. dif/dt - Rate of change of current
through zero crossing
2. I RRM - Peak reverse recovery current
3. trr - Reverse recovery time measured
from zero crossing point of negative
going IF to point where a line passing
through 0.75 IRRM and 0.50 IRRM
extrapolated to zero current
4. Qrr - Area under curve defined by trr
and I RRM
trr X IRRM
Q rr =
2
5. di(rec)M/dt - Peak rate of change of
current during t b portion of trr
Fig. 10 - Reverse Recovery Waveform and
Definitions
5
HFA04TB60PbF
TO-220AC Package Outline
Dimensions are shown in millimeters (inches)
TO-220AC Part Marking Information
PART NUMBER
EXAMPLE: THIS IS A HFA06TB120
LOT CODE 1789
AS S EMBLED ON WW 19, 2001
IN THE AS S EMBLY LINE "C"
INTERNAT IONAL
RECT IFIER
LOGO
DATE CODE
AS S EMBLY
LOT CODE
P = LEAD-FREE
YEAR 1 = 2001
WEEK 19
LINE C
PART NUMBER
EXAMPLE: THIS IS A HFA06T B120
LOT CODE 1789
AS S EMBLED ON WW 19, 2001
IN THE AS S EMBLY LINE "C"
INTERNATIONAL
RECTIFIER
LOGO
DATE CODE
ASS EMBLY
LOT CODE
YEAR 1 = 2001
WEEK 19
P = LEAD-FREE
Data and specifications subject to change without notice.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information. 10/04
6
www.irf.com