P R O D U C T B R I E F B l u e t o o t h TM Radio Transceiver The Bluetooth Radio PBA 313 05 from Infineon Technologies is a short-range microwave frequency radio transceiver for Bluetooth communication links. Provided in a compact LGA package. No external shield is required. The Bluetooth Radio offers a combination of compact size, low power consumption, and cost effective assembly. The PBA 313 05 forms a complete radio with only the addition of an antenna, a 13 MHz reference frequency crystal, and a digital control functionality. As a result, designers can benefit from a pre-tested PBA 313 05 and ready-to-use device, providing a robust Bluetooth Radio function in the final OEM application. PBA 313 05 is built around an RFCMOS ASIC. Antenna filter, RX and TX baluns are all integrated into the circuit. Operating from a 2.6 V supply, the module has a typical supply current consumption of only 50 mA (receive mode) or 60 mA (transmit mode), thus helping to extend battery life for portable equipment. Standby mode provides further power savings. Bluetooth Key Features RF output power class 2 ■ Pre-qualified for Bluetooth specification 1.1 ■ Forms a complete radio with only: -an antenna -a reference frequency ■ Small LGA package (9 ×9 ×1.6 mm) ■ A small, cost effective Bluetooth Radio, based on RFCMOS technology ■ Requires no external shielding ■ Applications ■ Mobile phones ■ PC peripherals ■ Wireless accessories ■ Cable replacement Note: The Bluetooth trademarks are owned by Bluetooth SIG, Inc. and used by Infineon Technologies under license. www.infineon.com/bluetooth PBA 313 05 R a d i o Tr a n s c e i v e r N e v e r s t o p t h i n k i n g . P R O D U C T B R I E F Key data Parameter Condition Frequency range Reference clock frequency Receiver sensitivity level Current consumption Min Type Max Unit 2.480 13 -80 Ghz MHz dBm 60 50 70 mA mA µA 2.402 Transmit Receive Stand by Output power Supply Voltage Temperature range Size -4 2.6 -20 4 2.9 +75 mm 2.8 9x9x1.6 dB V °C Control interface Operation together with a Bluetooth Baseband using the Ericsson Bluetooth Core is recommended. Antenna interface 50 Ohm Bluetooth ISM band antenna (2.4-2.5GHZ). Ordering information This Bluetooth radio from Infineon Technologies may be ordered as: PBA 313 05. How to reach us: http://www.infineon.com Published by Infineon Technologies AG, St.-Martin-Strasse 53, 81669 München © Infineon Technologies AG 2002. All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide. Published by Infineon Technologies AG Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in lifesupport devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life-support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Ordering No. B134-HXXX-X-X-7600 Printed in Germany PS 12021. NB