PD-2.276 rev. A 12/97 152CMQ030 SCHOTTKY RECTIFIER 150 Amp Description/Features Major Ratings and Characteristics Characteristics IF(AV) Rectangular 152CMQ030 Units The 152CMQ030 isolated, center tap Schottky rectifier module has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150 °C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 150 A 30 V 150 °C T J operation IFSM @ tp = 5 µs sine 7800 A Isolated heatsink Center tap module VF 0.47 V Multiple leads per terminal fpr high frequency, high current PC board mounting - 55 to 150 °C waveform VRRM @ 75Apk, TJ = 125°C (per leg) TJ range High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Low profile, high current package CASE STYLE AND DIMENSIONS Outline D-60 (Modified JEDEC TO-249AA) Dimensions in millimeters and inches www.irf.com 1 152CMQ... Series PD-2.276 rev. A 12/97 Voltage Ratings Part number VR 152CMQ030 Max. DC Reverse Voltage (V) 30 VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters 152CMQ Units IF(AV) Max. Average Forward Current 150 Conditions A 50% duty cycle @ TC = 85 °C, rectangular wave form A 5µs Sine or 3µs Rect. pulse Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied * See Fig. 5 IFSM EAS Max. Peak One Cycle Non-Repetitive 7800 Surge Current (Per Leg) * See Fig. 7 1000 Non-Repetitive Avalanche Energy 68 mJ 15 A TJ = 25 °C, I AS = 15 Amps, L = 0.6 mH (Per Leg) IAR Repetitive Avalanche Current (Per Leg) Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM IRM 152CMQ Units Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) Max. Reverse Leakage Current (Per Leg) * See Fig. 2 (1) Conditions 0.55 0.69 0.47 V V V @ 75A @ 150A @ 75A 0.66 V @ 150A 5 mA TJ = 25 °C 280 mA TJ = 125 °C TJ = 25 °C TJ = 125 °C VR = rated VR CT Max. Junction Capacitance (Per Leg) 3700 pF VR = 5VDC, (test signal range 100Khz to 1Mhz) 25°C LS Typical Series Inductance (Per Leg) 9.2 nH Measured lead to lead 5mm from package body 10,000 V/ µs dv/dt Max. Voltage Rate of Change (Rated VR) (1) Pulse Width < 300µs, Duty Cycle <2% Thermal-Mechanical Specifications Parameters 152CMQ Units TJ Max. Junction Temperature Range -55 to 150 °C Tstg Max. Storage Temperature Range -55 to 150 °C Conditions RthJC Max. Thermal Resistance Junction to Case (Per Leg) 1.0 °C/W DC operation RthJC Max. Thermal Resistance Junction to Case (Per Package) 0.50 °C/W DC operation RthCS Typical Thermal Resistance, Case to Heatsink 0.10 °C/W Mounting surface , smooth and greased wt Approximate Weight T Mounting Torque Case Style 2 56 (2.0) g (oz.) Min. 40 (35) Max. 58 (50) Kg-cm (Ibf-in) D-60 (TO-249AA) * See Fig. 4 Modified JEDEC www.irf.com 152CMQ... Series PD-2.276 rev. A 12/97 1000 1000 ReverseCurrent - I (mA) R 100 100 125°C 100°C 10 75°C 1 50°C .1 25°C .01 0 5 10 15 20 30 25 ReverseVoltage- VR(V) T =150°C J Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) T =125°C J 10000 T = 25°C J JunctionCapacitance- C (pF) T Instantaneous Forward Current - I (A) F T =150°C J 10 1 0 .1 .2 .3 .4 .5 .6 .7 .8 .9 1 1.1 1.2 1.3 TJ=25°C 1000 0 5 10 15 20 25 30 35 ForwardVoltage Drop- V (V) FM Reverse Voltage -V (V) R Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) Thermal Impedance - Z (°C/W) thJC 10 1 .1 D=0.50 D=0.33 D=0.25 D=0.17 D=0.08 P DM t 1 t 2 Notes: 1. Dutyfactor D= t / t 1 2 .01 Single Pulse (Thermal Resistance) .001 .00001 .0001 .001 2. PeakT =P xZ +T J DM thJC C .01 .1 1 10 100 t1, Rectangular Pulse Duration(Seconds) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) www.irf.com 3 152CMQ... Series PD-2.276 rev. A 12/97 60 152CMQ030 RthJC(DC) =1.0°C/W 140 AveragePower Loss- (W atts) AllowableCaseTemperature- (°C) 160 120 DC 100 80 0 25 50 75 100 D=0.08 D=0.17 50 D=0.25 D=0.33 D=0.50 40 RMSLimit 30 20 DC 10 0 0 10 20 30 40 50 60 70 80 90 100110 125 AverageForwardCurrent - I (A) F(AV) AverageForwardCurrent - IF(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Fig. 6 - Forward Power Loss Characteristics (Per Leg) Non-Repetitive Surge Current - I FSM (A) 10000 1000 At Any Rated Load Condition And With Rated VRRM Applied Following Surge 100 10 100 1000 10000 Square Wave Pulse Duration - tp (microsec) Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) L DUT IRFP460 Rg = 25 ohm CURRENT MONITOR HIGH-SPEED SWITCH FREE-WHEEL DIODE + Vd = 25 Volt 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit 4 www.irf.com