Product Overview NCV7608: Configurable 8-Channel Driver For complete documentation, see the data sheet Product Description The NCV7608 integrates 8 output drivers configurable in any combination of highside, lowside, or full bridge configurations. The integrated standard Serial Peripheral Interface (SPI) allows digital control of all outputs stages and provide diagnostic fault information. In addition, four channels (CH5 to CH8) can be PWM controlled via external control input pins. Integrated clamping circuits (both in high and low side operational modes), waveshaping, positive and negative transient protection, and dedicated channel pair overtemperature shutdown circuits provide for a wide range of automotive and industrial applications. Features Benefits • • • • • • • • Eight Independent Configurable Drivers RDS(on) = 1.2 (typ @25 C) 5 MHz SPI Interface for Data Communication 16 Bit Frame Length, Daisy Chain Compatible 3.3 V or 5 V Compatible PWM Inputs for 4 Outputs Ultra low Standby Current Over Current Protection (Characterized to AEC Q10X 12 REV A) • High Side and Low Side Flyback Protection • Fault Reporting For more features, see the data sheet Applications • • • • • • • • Flexible Configuration Low Power Dissipation High speed control is possible Capable of having multiple 16 Bit devices in one chain Will function with a variety of controller Parallel control of four of the outputs Low battery current drain Self Protects for high current conditions • Protects against abnormal load conditions • Aids in fault diagnostics End Products • DC Motor Management • Relay Driver • Automobiles • Industrial Equipment Part Electrical Specifications Product Compliance Status Number of Drivers VCC Max (V) V(BR)GSS Max (V) V(BR)DSS Max ID Max (A) (V) rDS(on) Max (Ω) Tj Max (°C) Package Type NCV7608DQR2G AEC Qualified Active 8 5.5 16 34 2.8 SSOP-36 EP PPAP Capable Pb-free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016 0.35 150