PDF Data Sheet Rev. B

NatureVue™ Video Signal Processor with
Bitmap OSD, Dual HDMI Tx, and Encoder
ADV8003
Data Sheet
FEATURES
HDMI transmitters
Dual HDMI transmitters enabling splitter capability
Content type bits
CEC 1.4 controller
Audio return channel (ARC) support
Support of standard S/PDIF for stereo LPCM compressed
audio up to 192 kHz
6-channel uncompressed LPCM I2S audio up to 192 kHz
6-channel direct stream digital (DSD) audio inputs
Noise shaped video (NSV) six-DAC video encoder
Six 12-bit NSV video DACs
Multiformat video output support
Composite (CVBS), S-Video (Y/C), and Component YPrPb
(SD, ED, and HD)
Rovi Rev. 7.1.L1 (SD) and Rev. 1.4 (ED) compliant
Simultaneous SD and ED/HD operation
Professional video mode
Capability to output up to 36-bit TTL data
Video signal processor
Full 12-bit, 4:4:4 YUV internal processing
Motion adaptive de-interlacing with ultralow angle
interpolation
Multiple video processing paths
Upscaling to 4k × 2k (ADV8003KBCZ-8x models only)
Aspect ratio conversion/panorama scaling
Cadence detection for the recovery of original frames from
film-based content
Dual video scalers enable simultaneous output of multiple
different resolutions
Sharpness and detail enhancement
Noise reduction to reduce random, mosquito, and block
noise
Frame rate converter
Support for up to 3 simultaneous video streams, including
picture-in-picture (PiP) support
On-screen display (OSD)
Internally generated bitmap-based OSD allowing overlay
on one or more video outputs
Overlay on 3D video formats
Dedicated OSD scaler
Alpha blending of OSD data on video data
Disturbance free blending of OSD on either of 2 zones
Option of external OSD
Easy to use software tool for developing OSDs
APPLICATIONS
High-end A/V receivers
Upconverting DVD players/recorders
Blu-ray players/recorders
Set-top boxes
Video conferencing
Standalone video processors
HDMI splitters
FUNCTIONAL BLOCK DIAGRAM
AUDIO INPUT
DDR2 INTERFACE
ADV8003
TTL DATA
60-BIT
TTL PORT
24-BIT/
36-BIT/
48-BIT
VIDEO
INPUT
36-BIT
VIDEO
OUTPUT
OSD BUILD
AND SCALE
LOW ANGLE
PROCESSING
DETAIL
ENHANCE
CADENCE
DETECTION
NOISE
REDUCTION
MOTION
DETECTION
ENHANCE
DUAL SCALER
AND
OSD BLEND
FRC
HDMI Tx1
HDMI
HDMI Tx2
HDMI
HD VIDEO
DACs
HD VIDEO
SD VIDEO
DACs
SD VIDEO
CUE
CORRECTION
SERIAL
VIDEO
RECEIVER
DE-INTERLACER
VIDEO PROCESSING
10556-001
SERIAL VIDEO
FOR EXAMPLE, ADV78500
OUTPUT
Figure 1.
Rev. B
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2012–2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
ADV8003
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Thermal Considerations............................................................ 59
Applications ....................................................................................... 1
Functional Overview...................................................................... 60
Functional Block Diagram .............................................................. 1
Video Input ................................................................................. 60
Revision History ............................................................................... 2
Flexible Digital Core .................................................................. 60
General Description ......................................................................... 3
Video Signal Processor (VSP) ................................................... 60
The ADV8003 Family .................................................................. 3
On-Screen Display (OSD) ......................................................... 61
Detailed Functional Block Diagram .............................................. 5
External DDR2 Memory ........................................................... 61
Specifications..................................................................................... 6
HDMI Transmitters ................................................................... 61
Electrical Characteristics ............................................................. 6
Video Encoder ............................................................................ 61
Analog Specifications ................................................................... 7
Professional Configuration ....................................................... 61
Data and I C Timing Characteristics ......................................... 8
Register Map Architecture ............................................................ 62
Absolute Maximum Ratings .......................................................... 18
Typical Applications Diagram ...................................................... 63
ESD Caution ................................................................................ 18
Outline Dimensions ....................................................................... 64
Pin Configuration and Function Descriptions ........................... 19
Ordering Guide .......................................................................... 64
2
Design Considerations ................................................................... 59
Power-Up Sequence ................................................................... 59
REVISION HISTORY
8/13—Revision B: Initial Version
Rev. B | Page 2 of 64
Data Sheet
ADV8003
GENERAL DESCRIPTION
The ADV8003 is a multiple input video signal processor that can
de-interlace and scale SD, ED, or HD video data to HD formats;
generate a bitmap on-screen display (OSD); and output the video
with OSD overlaid on two High Definition Multimedia Interface
(HDMI®) transmitters and a video encoder.
Video can be input into the ADV8003 in a number of ways:
using the 48-bit TTL pixel port, using the 24-bit external OSD
TTL pixel port, or from a device with an HDMI transmitter such
as the ADV7850. The ADV8003 supports many of the formats
outlined in the CEA-861 and VESA specifications, as well as
several other widely used timing formats.
Using two external DDR2 memories, the ADV8003 can perform
high performance, motion adaptive interlaced to progressive
conversion on SD and HD content. Using a single DDR2 memory,
the HD de-interlacing is limited to intrafield.
The ADV8003 features primary and secondary video scalers
that enable simultaneous output of multiple different resolutions.
The primary video scaler of the ADV8003KBCZ-8/8B/8C models
is capable of upscaling to 4k × 2k format and downscaling from
1080p. The primary video scaler of the ADV8003KBCZ-7/
ADV8003KBCZ-7B/ADV8003KBCZ-7C/ADV8003KBCZ-7T
models is capable of upscaling and downscaling to and from a
1080p format. The secondary video scaler facilitates up-scaling to
1080p and downscaling to 480p. Detail enhancement and image
enhancing techniques such as random, mosquito, and block noise
reduction allow for improved final image quality. The frame rate
converter of the ADV8003 allows the conversion between
common frame rates with support to output two different frame
rates simultaneously under certain conditions.
DDR2
INTERFACE
60-BIT
INPUT
VIDEO
48-BIT
INPUT
1080p (OSD)
HDMI Tx2
1080i (OSD)
HD VIDEO
DACs
720p (OSD)
SD VIDEO
DACs
480i
The ADV8003 can accept OSD information from an external OSD
source on the 24-bit external OSD TTL pixel data input or can
internally generate a high quality, bitmap-based OSD. The internal
OSD is highly flexible and allows the system designer to easily
incorporate features like scrolling text and animation in various
color depths up to 24-bit true color.
Analog Devices, Inc., provides an OSD development tool (Blimp)
to assist in the design, debug, and emulation of the OSD prior
to integration with the system application. When the design is
complete, the OSD development tool automatically generates
code to which system APIs can be added before integration with
the system application and an OSD design resource, which must
be downloaded to an external SPI flash memory.
Video can be output from the ADV8003 using one or both of the
HDMI transmitters and/or the 6-DAC SD/HD video encoder. The
flexible multiplexing allows simultaneous output on the HDMI
transmitters and HD formats on the HD DACs (for example,
1080p) with SD formats on the SD DACs (for example, 480i).
Both of the HDMI transmitters on the ADV8003 support all
mandatory and many optional 3D video resolutions and audio
return channels (ARC). Each transmitter also features a full
CEC master. The ADV8003 can receive up to six channels of I2S,
S/PDIF, direct stream digital (DSD), and high bit rate (HBR).
The six 12-bit NSV® video DACs allow for composite (CVBS),
S-Video (Y/C), and component (YPrPb) analog outputs in
standard, enhanced, and high definition video formats. Oversampling of 216 MHz (SD and ED) and 297 MHz (HD) removes
the requirement for external output filtering.
The ADV8003 can also support 30-bit TTL in mode and 30-bit
TTL out mode for professional applications, which do not require
the use of HDMI.
The ADV8003 supports the I2C protocol for communication
with the system microcontroller.
DIGITAL
CORE
THE ADV8003 FAMILY
10556-002
480i VIDEO
FROM
DECODER
HDMI Tx1
channels, or displaying OSD on multiple outputs of different
resolutions.
Figure 2. Sample Multiple Output Configuration
The ADV8003 has a flexible digital core that allows the user to
configure the part in several different modes; for example, using
a single video processing channel, using dual video processing
There are a number of derivatives within the ADV8003 family,
each featuring different capabilities; all are provided in the same
19 mm × 19 mm, 425-ball CSP_BGA package (see Table 1).
Note that the functionality of the ADV8003KBCZ-8 is
described throughout this data sheet. Some sections are not
relevant to other models because not all of the blocks found in
the ADV8003KBCZ-8 are included in those models. Table 1
lists the functionality for each model.
Rev. B | Page 3 of 64
ADV8003
Data Sheet
Table 1. Features Sets of the ADV8003 Family ICs
Part Number
ADV8003KBCZ-8 1
ADV8003KBCZ-8B
ADV8003KBCZ-8C
ADV8003KBCZ-71
ADV8003KBCZ-7B
ADV8003KBCZ-7C
ADV8003KBCZ-7T
1
Maximum
Data Rate
3 Gbps
3 Gbps
3 Gbps
2.25 Gbps
2.25 Gbps
2.25 Gbps
2.25 Gbps
Maximum Video Format
4k × 2k at 30 Hz (8-bit)
4k × 2k at 30 Hz (8-bit)
4k × 2k at 30 Hz (8-bit)
UXGA (162 MHz)
UXGA (162 MHz)
UXGA (162 MHz)
UXGA (162 MHz)
HDMI TX
Outputs
2
1
2
2
1
2
0
Analog Outputs
Six 12-bit DACs
No
No
Six 12-bit DACs
No
No
No
Rovi
Output
Yes
No
No
Yes
No
No
No
VSP
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Rovi enabled ICs require the buyer to be an approved licensee (authorized buyer) of ICs that are capable of outputting Rovi compliant video.
Rev. B | Page 4 of 64
OSD
Yes
Yes
Yes
Yes
Yes
Yes
Yes
TTL
Out
Yes
No
No
Yes
No
No
Yes
VS
Figure 3. ADV8003KBCZ-8
Rev. B | Page 5 of 64
DDR_DQ[31:0]
RESET
GENERATION
AND POWER
MANAGEMENT
TOP LEVEL
CONTROL
CLOCK
GENERATION
RECEIVER
POWER
SUPPLY
DETAIL
ENHANCEMENT
CUE
CORRECTION
FRAME
RATE
CONVERTER
SCALER 2
SCALER 1
SCALING AND
FRAME RATE
CONVERSION
HEAC
ARC PORT
VIDEO PROCESSING AND OSD BLENDING
BLOCK
NOISE
REDUCTION
LOW ANGLE
PROCESSING
CADENCE
DETECTION
MOSQUITO
NOISE
REDUCTION
MOTION
DETECTION
VIDEO
ENHANCEMENT
RANDOM
NOISE
REDUCTION
DE-INTERLACER
AND CADENCE
DETECTION
SPI
SLAVE
I2C SLAVE
I/O, OSD, ENCODER
VSP, HDMI Tx
REGISTER MAPS
SPI
MASTER
OSD
SCALER
BITMAP OSD
CONTROLLER
OSD
GENERATION
CONTROL
OSD VIDEO
BLEND
DDR_VREF
INT0
INT1
INT2
XTALP
XTALN
RX_0 P
RX_0N
RX_1 P
RX_1N
RX_2 P
RX_2N
RX_C P
RX_CN
RX_HPD
RX_5V
PCLK
DE
DIGITAL
VIDEO
CAPTURE
AND
FORMATTING
DDR_RAS
HS
OSD VIDEO
CAPTURE
AND
FORMATTING
DDR_CS
P[35:0]
OSD_DE
OSD_CLK
OSD_IN[12]
OSD_VS
COLOR SPACE
CONVERSION
UPDITHER
TO VBI INSERTION IN
ENCODER BLOCK
DDR_WE
OSD_HS
OSD_IN[23:16]/
OSD_IN[11:0]/
EXT_DIN[7:0]
DDR_DQS[3:0]
SPI SLAVE
DDR_DQS[3:0]
OSD_IN[15:13]/
VBI_x
DDR_DM[3:0]
COLOR SPACE
CONVERSION
UPDITHER
DDR_BA[2:0]
COLOR SPACE
CONVERSION
UPDITHER
DDR_A[12:0]
VIDEO MUXING
DDR_CAS
DDR2 INTERFACE
DDR_CK
VBI DATA SERVICE
INSERTION
PROGRAMMABLE
CHROMINANCE
FILTERS
PROGRAMMABLE
LUMINANCE
FILTERS
SHARPNESS AND
ADAPTIVE FILTER
CONTROL
HDCP
ENCRYPTION
SUBCARRIER
FREQ LOCK
SIN/COS
MODULATION/COS
SYNC
INSERTION
ENCODER
4:2:2
4:4:4
AND
COLOR SPACE
CONVERTER
HDMI Tx
VIDEO DATA
CAPTURE
PROGRAMMABLE
HDTV FILTERS
4:2:2
4:4:4
AND
COLOR SPACE
CONVERTER
REFERENCE
AND CABLE
DETECTION
12-BIT
DAC6
12-BIT
DAC5
12-BIT
DAC4
12-BIT
DAC3
12-BIT
DAC2
12-BIT
DAC1
TMDS
OUTPUTS
HDCP
KEYS
TMDS
OUTPUTS
HDCP
KEYS
MASTER
I2C
CEC
CONTROL
HDCP
ENCRYPTION
HDCP AND EDID
UNCONTROLLER
AUDIO DATA CAPTURE
HDMI Tx
VIDEO DATA
CAPTURE
ED/HD
PROCESSOR
DDR_CK
MULTIPLEXER
MCLK
16×/4× OVERSAMPLING FILTERS
SCLK
SD
PROCESSOR
DSD_CLK
2 × PLLs
AUD_IN[5:0]
DDR2 CONTROLLER INTER FACE
DAC6
DAC5
DAC4
DAC3
DAC2
DAC1
TX2_0+
TX2_0–
TX2_1+
TX2_1–
TX2_2+
TX2_2–
TX2_C+
TX2_C–
TX1_0+
TX1_0–
TX1_1+
TX1_1–
TX1_2+
TX1_2–
TX1_C+
TX1_C–
HPD_TX1
HPD_TX2
DDC1_SC L
DDC1_SD A
DDC2_SC L
DDC2_SD A
CEC2
CEC1
Data Sheet
ADV8003
DETAILED FUNCTIONAL BLOCK DIAGRAM
COMPx
RSETx
VREF
ELPFx
SFL
ALSB
SCL
SDA
CS2
SCK2
MISO2
MOSI2
CS1
SCK1
MISO1
MOSI1
HEAC_1+
HEAC_1–
HEAC_2+
HEAC_2–
ARC1_OUT
ARC2_OUT
DVDD_IO
PVDD_DDR
DVDD_DDR
AVDDx
CVDD1
PVDDx
DVDD
PDN
RESET
10556-003
ADV8003
Data Sheet
SPECIFICATIONS
Measured at DVDD = 1.746 V to 1.854 V, DVDD_DDR = 1.746 V to 1.854 V, PVDD1 = 1.746 V to 1.854 V, PVDD2 = 1.746 V to 1.854 V,
PVDD3 = 1.746 V to 1.854 V, PVDD5 = 1.746 V to 1.854 V, PVDD6 = 1.746 V to 1.854 V, PVDD_DDR = 1.746 V to 1.854 V, AVDD3 =
1.746 V to 1.854 V, CVDD1 = 1.746 V to 1.854 V, AVDD1 = 3.20 V to 3.40 V, AVDD2 = 3.20 V to 3.40 V, DVDD_IO = 3.20 V to 3.40 V,
TMIN to TMAX = 0°C to 70°C, unless otherwise noted.
ELECTRICAL CHARACTERISTICS
Table 2.
Parameter
STATIC PERFORMANCE
Resolution (Each DAC)
Integral Nonlinearity, +ve 1
Integral Nonlinearity, −ve1
Differential Nonlinearity, +ve 2
Differential Nonlinearity, −ve2
DIGITAL INPUTS
Input High Voltage
Symbol
Test Conditions/Comments
N
INL
INL
DNL
DNL
DAC outputs sampled at 500 kHz
DAC outputs sampled at 500 kHz
DAC outputs sampled at 500 kHz
DAC outputs sampled at 500 kHz
VIH
Input Low Voltage
VIL
Input Leakage Current
IIN
Input Capacitance
DIGITAL INPUTS (5 V TOLERANT)
Input High Voltage
Input Low Voltage
Input Leakage Current
DIGITAL OUTPUTS
Output High Voltage
Output Low Voltage
High Impedance Leakage Current
Output Capacitance
POWER REQUIREMENTS 3, 4, 5
Digital Power Supply
PLL Analog Supply
PLL Digital Supply
Encoder PLL Supply
HDMI Tx1 PLL Power Supply
HDMI Tx2 PLL Power Supply
HDMI Analog Power Supply
Comparator Power Supply
HDMI Rx Inputs Analog Supply
Encoder Analog Power Supply
Digital Interface Supply
Digital Power Supply Current, Including
DVDD_DDR and PVDD_DDR
Min
HEAC inputs
DDR_DQS inputs
Other digital inputs
13
VOH
VOL
ILEAK
COUT
2.4
DVDD
PVDD1
PVDD2
PVDD3
PVDD5
PVDD6
AVDD3
CVDD1
AVDD1
AVDD2
DVDD_IO
IDVDD
1.746
1.746
1.746
1.746
1.746
1.746
1.746
1.746
3.20
3.20
3.20
PLL Digital Supply Current
IPVDD2
V
0.3 ×
DVDD_IO
±60
±60
±10
3.4
0.8
±60
0.4
±10
13
Mode 1
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
3.3
3.3
3.3
1989.0
Mode 2
Power-down mode
Mode 1
Mode 2
Power-down mode
Mode 1
Mode 2
Power-down mode
1423.0
60.6
23.0
21.0
1.3
21.8
19.9
0.2
Rev. B | Page 6 of 64
Unit
Bits
LSB
LSB
LSB
LSB
0.7 ×
DVDD_IO
VIH
VIL
IIN
IPVDD1
Max
12
0.389
−0.322
0.183
−0.208
CIN
PLL Analog Supply Current
Typ
1.854
1.854
1.854
1.854
1.854
1.854
1.854
1.854
3.40
3.40
3.40
V
µA
µA
µA
pF
V
V
µA
V
V
µA
pF
V
V
V
V
V
V
V
V
V
V
V
mA
mA
mA
mA
mA
mA
mA
mA
mA
Data Sheet
Parameter
Encoder PLL Supply Current
ADV8003
Symbol
IPVDD3
HDMI Tx1 PLL Supply Current
IPVDD5
HDMI Tx2 PLL Supply Current
IPVDD6
HDMI Analog Power Supply Current
IAVDD3
Comparator Power Supply Current
ICVDD1
HDMI Rx Inputs Analog Supply Current
IAVDD1
Encoder Analog Power Supply
IAVDD2
Digital Interface Supply Current
IDVDD_IO
Test Conditions/Comments
Mode 1
Mode 2
Power-down mode
Mode 1
Mode 2
Power-down mode
Mode 1
Mode 2
Power-down mode
Mode 1
Mode 2
Power-down mode
Mode 1
Mode 2
Power-down mode
Mode 1
Mode 2
Power-down mode
Mode 1
Mode 2
Power-down mode
Mode 1
Mode 2
Power-down mode
Min
Typ
8.9
3.8
0.0
62.2
49.3
1.8
62.5
2.1
1.6
52.9
19.7
3.6
76.1
69.6
1.1
62.3
56.8
6.3
36.2
9.2
1.9
1.14
1.93
0.1
Max
Unit
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
Integral nonlinearity (INL) measures the deviation of the actual DAC transfer function from the ideal. For +ve INL, the actual line lies above the ideal line value. For −ve INL,
the actual line lies below the ideal line value.
2
Differential nonlinearity (DNL) measures the deviation of the actual DAC output voltage step from the ideal. For +ve DNL, the actual step value lies above the ideal
step value. For −ve DNL, the actual step value lies below the ideal step value.
3
Mode 1 involves a 1080i60 input to the ADV8003 receiver and a 720p60 input to the ADV8003 TTL external OSD input. Both inputs are run through the front-end color
space converters. The 1080i60 video stream is de-interlaced and upscaled to 4k × 2k at 24 Hz. The 720p video stream is input to the OSD block and is blended onto the
4k × 2k at 24 Hz video stream using the OSD block scaler. Both HDMI transmitters are then driven using the 4k × 2k at 24 Hz output.
4
Mode 2 involves a 1080i60 input to the ADV8003 receiver. This input is run through the front-end color space converter. The 1080i60 video stream is de-interlaced and
is output to HDMI Transmitter 1. The secondary VSP is used to convert the 1080p video stream to 480i and is output using the SD encoder.
5
In the power-down mode, the ARC and the internal clock tree are kept active.
1
ANALOG SPECIFICATIONS
Table 3.
Parameter
Low Drive Output Current (Full Scale)
DAC-to-DAC Matching
Output Compliance, VOC
Output Capacitance, COUT
DAC Analog Output Skew
Test Conditions/Comments
RSET = 4.12 kΩ, RL = 300 Ω
DAC1 to DAC6
Min
3.95
Typ
4.3
0.9
0
DAC1, DAC2, DAC3
DAC4, DAC5, DAC6
DAC1 to DAC6
Rev. B | Page 7 of 64
Max
4.5
1.4
9
9
0.2
Unit
mA
%
V
pF
pF
ns
ADV8003
Data Sheet
DATA AND I2C TIMING CHARACTERISTICS
For input timing measurements, VIH = DVDD_IO and VIL = GND.
Table 4.
Parameter
TMDS CLOCK
TMDS Input Clock Frequency
Symbol
TMDS Output Clock Frequency
CLOCK AND CRYSTAL
Crystal Frequency, XTAL
Crystal Frequency Stability
Primary Video Input Clock Frequency Range
Secondary Video Input Clock Frequency Range
Video Output Clock Frequency Range
Serial Port 1 SCK Frequency (SCK1)
Serial Port 2 SCK Frequency (SCK2)
Serial Port 3 SCK Frequency (VBI_SCK)
Audio SCLK Frequency
Audio MCLK Frequency
Audio DSD Clock Frequency
FAST I2C PORTS 1
SCL Frequency
SCL Minimum Pulse Width High
SCL Minimum Pulse Width Low
Start Condition Hold Time
Start Condition Setup Time
SDA Setup Time
SCL and SDA Rise Time
SCL and SDA Fall Time
Stop Condition Setup Time
SERIAL PORT 2, 3
Master Serial Port (Serial Port 2)
CS2 Falling Edge to SCK2 Rising/Falling Edge
Test Conditions/Comments
Min
ADV8003KBCZ-8,
ADV8003KBCZ-8B,
ADV8003KBCZ-8C
ADV8003KBCZ-7,
ADV8003KBCZ-7B,
ADV8003KBCZ-7C,
ADV8003KBCZ-7T
ADV8003KBCZ-8,
ADV8003KBCZ-8B,
ADV8003KBCZ-8C
ADV8003KBCZ-7,
ADV8003KBCZ-7B,
ADV8003KBCZ-7C,
ADV8003KBCZ-7T
Typ
Max
Unit
25
297
MHz
25
225
MHz
25
297
MHz
25
225
MHz
±50
162
162
162
50
81
27
49.152
98.304
5.6448
MHz
ppm
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
27
13.5
13.5
13.5
11.5
400
t1
t2
t3
t4
t5
t6
t7
t8
t9, t10
SCK2 Rising/Falling Edge to CS2 Rising Edge
t11, t12
CS2 Pulse Width
SCK2 High Time
t13
t14
600
1.3
600
600
100
300
300
0.6
t9, t10, depending on the
values of CPHA and CPOL
t11, t12, depending on the
values of CPHA and CPOL
SCK2 Low Time
1 × SCK2
periods
1 × SCK2
periods
1880
0.45 × SCLK2
periods
0.45 × SCLK2
periods
Rev. B | Page 8 of 64
1.5 × SCLK2
periods
1.5 × SCLK2
periods
1900
0.55 ×
SCLK2
periods
0.55 ×
SCLK2
periods
kHz
ns
µs
ns
ns
ns
ns
ns
µs
ns
ns
ns
%
duty
cycle
%
duty
cycle
Data Sheet
Parameter
MOSI2 Start of Data Invalid to SCK2 Falling Edge
CS2 Start of Data Invalid to SCK2 Falling
Edge
SCK2 Falling Edge to MOSI2 End of Data Invalid
SCK2 Falling Edge to CS2 End of Data Invalid
MISO2 Setup Time
ADV8003
Symbol
t15
t15
Test Conditions/Comments
SPI Mode 0, SPI Mode 3
SPI Mode 0, SPI Mode 3
t16
t16
t17
SPI Mode 0, SPI Mode 3
SPI Mode 0, SPI Mode 3
Valid regardless of the
SCK2 active edge used
Valid regardless of the
SCK2 active edge used
SPI Mode 1, SPI Mode 2
SPI Mode 1, SPI Mode 2
SPI Mode 1, SPI Mode 2
SPI Mode 1, SPI Mode 2
Valid regardless of the
SCK2 active edge used
Valid regardless of the
SCK2 active edge used
MISO2 Hold Time
t18
MOSI2 Start of Data Invalid to SCK2 Rising Edge
CS2 Start of Data Invalid to SCK2 Rising Edge
SCK2 Rising Edge to MOSI2 End of Data Invalid
SCK2 Rising Edge to CS2 End of Data Invalid
MISO2 Setup Time
t19
t19
t20
t20
t21
MISO2 Hold Time
t22
Slave Mode (Serial Port 1)
CS1 Falling Edge to SCK1 Rising/Falling Edge
t23, t24
SCK1 Rising/Falling Edge to CS1 Rising Edge
t25, t26
CS1 Pulse Width
t27
SCK1 High Time
t30
Max
1.15
0.81
Unit
ns
ns
1.85
2.14
14.57
ns
ns
ns
0.0
ns
1.59
1.24
1.39
1.68
14.57
ns
ns
ns
ns
ns
0.0
ns
t31
t32
t33
SPI Mode 0, SPI Mode 3
SPI Mode 0, SPI Mode 3
SPI Mode 0, SPI Mode 3
t34
t35
t36
t37
t38
SPI Mode 0, SPI Mode 3
SPI Mode 1, SPI Mode 2
SPI Mode 1, SPI Mode 2
SPI Mode 1, SPI Mode 2
SPI Mode 1, SPI Mode 2
t39
ns
50.0
ns
0.55 × SCK1
periods
0.45 × SCK1
periods
0.55 × SCK1
periods
0.15
1.4
5.89
12.08
0
1.96
5.79
11.97
0.45 ×
VBI_SCK
periods
0.45 ×
VBI_SCK
periods
0.55 ×
VBI_SCK
periods
0.55 ×
VBI_SCK
periods
5×
VBI_SCK
periods
SPI Mode 0 only
SPI Mode 0 only
Rev. B | Page 9 of 64
ns
0.45 × SCK1
periods
VBI_CS Pulse Width
t40
t41
50.0
5 × SCK1
periods
VBI_SCK Low Time
VBI_CS, VBI_MOSI Setup Time
VBI_CS, VBI_MOSI Hold Time
Typ
t23, t24, depending on the
values of CPHA and CPOL
t25, t26, depending on the
values of CPHA and CPOL
SCK1 Low Time
MOSI1 Setup Time
MOSI1 Hold Time
SCK1 Falling Edge to MISO1 Start of Data
Invalid
SCK1 Falling Edge to MISO1 End of Data Invalid
MOSI1 Setup Time
MOSI1 Hold Time
SCK1 Rising Edge to MISO1 Start of Data Invalid
SCK1 Rising Edge to MISO1 End of Data Invalid
Slave Mode (Serial Port 3)
VBI_SCK High Time
Min
0.93
0.75
%
duty
cycle
%
duty
cycle
ns
ns
ns
ns
ns
ns
ns
ns
%
duty
cycle
%
duty
cycle
ns
ns
ns
ADV8003
Parameter
SPI Pass-Through Mode
Data Transition on SCK1 to Start of Data
Invalid on SCK2
Data Transition on SCK1 to End of Data Invalid
on SCK2
Data Transition on MOSI1 to Start of Data
Invalid on MOSI2
Data Transition on MOSI1 to End of Data Invalid
on MOSI2
Data Transition on MISO2 to Start of Data
Invalid on MISO1
Data Transition on MISO2 to End of Data Invalid
on MISO1
Data Transition on CS1 to Start of Data
Invalid on CS2
Data Transition on CS1 to End of Data Invalid
on CS2
RESET FUNCTION
Reset Pulse Width
VIDEO DATA AND CONTROL INPUTS3
PCLK High Time
Data Sheet
Symbol
Test Conditions/Comments
Max
Unit
t42
5.17
ns
t43
10.20
ns
t42
4.90
ns
t43
10.85
ns
t42
5.29
ns
t43
11.97
ns
t42
4.61
ns
t43
8.78
ns
t44
ms
0.45 × PCLK
period
0.55 × PCLK
period
0.45 × PCLK
period
0.55 × PCLK
period
0.55 ×
OSD_CLK
period
0.55 ×
OSD_CLK
period
t45
0.45 ×
OSD_CLK
period
0.45 ×
OSD_CLK
period
1.42
t46
0.95
ns
t47
0.72
ns
t48
1.49
ns
t51
OSD_CLK Low Time
Main Video Input, SDR and DDR Mode Setup
Time (Data Latched on Rising Edge)
Main Video Input, SDR and DDR Modes Hold
Time (Data Latched on Rising Edge)
Main Video Input, DDR Mode Setup Time
(Data Latched on Falling Edge)
Main Video Input, DDR Mode Hold Time
(Data Latched on Falling Edge)
Interleaved Video Input, SDR Setup Time
(Data Latched on Rising Edge)
Interleaved Video Input, SDR Hold Time
(Data Latched on Rising Edge)
External OSD Input, SDR and DDR Mode Setup
Time (Data Latched on Rising Edge)
External OSD Input, SDR and DDR Mode Hold
Time (Data Latched on Rising Edge)
External OSD Input, DDR Mode Setup Time
(Data Latched on Rising Edge)
External OSD Input, DDR Mode Hold Time
(Data Latched on Rising Edge)
Typ
5
PCLK Low Time
OSD_CLK High Time
Min
%
duty
cycle
%
duty
cycle
%
duty
cycle
%
duty
cycle
ns
t49
Used for 300 MHz TTL data
1.42
ns
t50
Used for 300 MHz TTL data
0.95
ns
t52
1.33
ns
t53
0.94
ns
t54
0.57
ns
t55
1.51
ns
Rev. B | Page 10 of 64
Data Sheet
ADV8003
Parameter
VIDEO DATA AND CONTROL OUTPUTS3
OSD_CLK High Time
Symbol
Test Conditions/Comments
Max
Unit
t57
0.60 ×
OSD_CLK
period
0.60 ×
OSD_CLK
period
0.07
%
duty
cycle
%
duty
cycle
ns
t58
1.56
ns
t59
0.41
ns
t60
0.93
ns
0.55 ×
MCLK
periods
0.55 ×
MCLK
periods
%
duty
cycle
%
duty
cycle
ns
ns
0.55 ×
SCLK
periods
0.55 ×
SCLK
periods
%
duty
cycle
%
duty
cycle
ns
ns
0.55 ×
DSDCLK
periods
0.55 × SCLK
periods
%
duty
cycle
%
duty
cycle
ns
ns
t56
Typ
0.40 ×
OSD_CLK
period
0.40 ×
OSD_CLK
period
OSD_CLK Low Time
OSD_CLK Active Edge to Data and Control
Start of Data Invalid (Data Latched on Falling
Edge)
OSD_CLK Active Edge to Data and Control End
of Data Invalid (Data Latched on Falling Edge)
OSD_CLK Active Edge to Data and Control
Start of Data Invalid (Data Latched on Rising
Edge)
OSD_CLK Active Edge to Data and Control End
of Data Invalid (Data Latched on Rising Edge)
S/PDIF INPUT3
MCLK High Time
Min
t61
0.45 × MCLK
periods
MCLK Low Time
0.45 × MCLK
periods
S/PDIF Data Setup Time
S/PDIF Data Hold Time
I2S PORT, SLAVE MODE3
SCLK High Time
t62
t63
0.12
1.89
t64
0.45 × SCLK
periods
SCLK Low Time
0.45 × SCLK
periods
I2S Data Setup Time
I2S Data Hold Time
DSD PORT3
DSD Clock High Time
t65
t66
0.42
1.38
t67
0.45 × DSD
CLK periods
DSD Clock Low Time
0.45 × SCLK
periods
DSD Data Setup Time
DSD Data Hold Time
t68
t69
0.48
1.79
It is possible to run I2C at faster speeds; however, it has been characterized to run only in fast mode.
All serial port measurements are for the default polarity and phase settings (clock low in idle state and negative edge used).
3
All measurements are guaranteed by design only.
1
2
Timing Diagrams
t3
t5
t3
SDA
t1
SCL
t2
t7
t4
2
Figure 4. I C Timing
Rev. B | Page 11 of 64
t8
10556-004
t6
ADV8003
Data Sheet
t13
t9
t11
t12
t10
CS2
0
0
0
SCK2
1
0
1
SCK2
2
1
0
SCK2
3
1
1
SCK2
INSTRUCTION(0x0B)
MOSI2
24-BIT ADDRESS
23 22 21 ... 3
2
1
DUMMY BYTE
0
7
6
5
4
3
2
1
0
DATA OUT 1
MISO2
7
6
5
4
3
2
DATA OUT 2
1
0
7
6
5
4
3
2
1
10556-005
SPI
MODE CPOL CPHA
0
Figure 5. Detailed SPI Master Timing Diagram (Serial Port 2)
t14
t17
t17
t18
t15
t18
t16
SCK2
MOSI2
CS2
MISO2
(FALLING EDGE CAPTURE)
10556-006
MISO2
(RISING EDGE CAPTURE)
Figure 6. Serial Port 2 Master Mode Timing (SPI Mode 0 and SPI Mode 3)
t14
t21
t19
t20
t21
t22
t22
SCK2
MOSI2
CS2
MISO2
(RISING EDGE CAPTURE)
10556-007
MISO2
(FALLING EDGE CAPTURE)
Figure 7. Serial Port 2 Master Mode Timing (SPI Mode 1 and SPI Mode 2)
Rev. B | Page 12 of 64
Data Sheet
ADV8003
t27
t23
SPI
MODE CPOL CPHA
t24
CS1
0
0
0
SCK1
1
0
1
SCK1
2
1
0
SCK1
3
1
1
SCK1
t25
t26
W/R
7
6
5
4
1
2
3
0
7
6
5
4
3
2
1
0
7
5
6
4
3
2
DATA IN 1
1
0
7
6
7
6
6
5
4
3
2
3
2
1
0
5
4
3
2
1
0
1
0
DATA OUT 1
DATA OUT 0
7
4
DATA OUT 0
DUMMY BYTE
DELAY MODE 1
MISO1
DELAY MODE 0
MISO1
5
1
0
7
6
5
4
3
2
10556-008
MOSI1
DATA IN 0
SUB ADDRESS
DEVICE ADDRESS
Figure 8. Detailed SPI Slave Timing Diagram (Serial Port 1)
t30
t31
t34
t32
t33
SCK1
10556-009
MOSI1
MISO1
Figure 9. Serial Port 1 Slave Mode Timing (SPI Mode 0 and SPI Mode 3)
t30
t35
t38
t37
t36
SCK1
10556-010
MOSI1
MI SO1
Figure 10. Serial Port 1 Slave Mode Timing (SPI Mode 1 and SPI Mode 2)
t39
t40
t41
VBI_SCK
10556-011
VBI_CS
VBI_MOSI
Figure 11. Serial Port 3 Slave Mode Timing (SPI Mode 0 Only)
Rev. B | Page 13 of 64
ADV8003
Data Sheet
t43
t42
SCK1
MISO2
MOSI1
CS1
10556-012
SCK2
MISO1
MOSI2
CS2
Figure 12. SPI Pass-Through Mode (Serial Port 1 and Serial Port 2)
t45
t44
t46
PCLK
10556-013
P[35:0]
HS
VS
DE
Figure 13. Main Video Input, Noninterleaved SDR Video Data and Control Timing
t44
PCLK
t47
t46
t48
t45
10556-014
P[35:0]
HS
VS
DE
Figure 14. Main Video Input, Noninterleaved DDR Video Data and Control Timing
t44
PCLK
t49
t50
OSD_IN[11:0]
P[35:24]
10556-015
P[23:0]
HS
VS
DE
Figure 15. Interleaved SDR Video Data and Control Input Timing
Rev. B | Page 14 of 64
Data Sheet
ADV8003
t51
OSD_CLK
t53
t52
10556-016
OSD_IN[23:0]
OSD_HS
OSD_VS
OSD_DE
Figure 16. External OSD Input, Noninterleaved SDR Video Data and Control Timing
t51
OSD_CLK
t54
t53
t55
t52
10556-017
OSD_IN[23:0]
OSD_HS
OSD_VS
OSD_DE
Figure 17. External OSD Input, Noninterleaved DDR Video Data and Control Timing
t56
OSD_CLK
t57
t58
10556-018
OSD_IN[23:0]
P[35:24]
OSD_HS
OSD_VS
OSD_DE
Figure 18. SDR Video Data and Control Output Timing (Data Launched on Falling Edge)
t56
OSD_CLK
t59
t60
10556-119
OSD_IN[23:0]
P[35:24]
OSD_HS
OSD_VS
OSD_DE
Figure 19. SDR Video Data and Control Output Timing (Data Launched on Rising Edge)
Rev. B | Page 15 of 64
ADV8003
Data Sheet
t61
MCLK
t62
t63
10556-120
S/PDIF
AUDIO
DATA
Figure 20. S/PDIF Input Timing, Data Latched on Rising Edge
DATA
SYNC IMPULSE
S/PDIF
1.5 × tMCLK
10556-020
tMCLK
0.5 × tMCLK
Figure 21. S/PDIF Data Timing
t64
SCLK
t65
t66
10556-021
I2S[3:0]
LRCLK
Figure 22. I2S Timing
AUD_IN[5]
RIGHT
LEFT
SCLK
MSBLEFT
LSB
LSB
MSBRIGHT
32 CLOCK SLOTS
32 CLOCK SLOTS
I2S STANDARD
I2S FORMAT = 00
10556-022
AUD_IN[4:1]
Figure 23. I2S Standard Audio—Data Width of 16 Bits to 24 Bits per Channel
AUD_IN[5]
LEFT
RIGHT
SCLK
LSBRIGHT
LSBLEFT
MSBLEFT
LSB
MSBRIGHT
16 CLOCK SLOTS
16 CLOCK SLOTS
I2S STANDARD 16-BIT PER CHANNEL
I2S FORMAT = 00
Figure 24. I2S Standard Audio—16-Bit Samples Only
Rev. B | Page 16 of 64
10556-023
AUD_IN[4:1]
Data Sheet
AUD_IN[5]
ADV8003
LEFT
RIGHT
SCLK
AUD_IN[4:1]
MSB
MSB
MSB
MSB – 1
MSB
LSB
MSB
MSB
MSB
MSB – 1
MSB
LSB
MSB
EXTENDED
MSB
EXTENDED
32 CLOCK SLOTS
10556-024
32 CLOCK SLOTS
SERIAL AUDIO
RIGHT JUSTIFIED
2
I S FORMAT = 01
Figure 25. Serial Audio—Right-Justified
AUD_IN[5]
LEFT
RIGHT
SCLK
AUD_IN[4:1]
LSB
MSB
LSB
MSB
32 CLOCK SLOTS
32 CLOCK SLOTS
10556-125
SERIAL AUDIO
LEFT JUSTIFIED
I2S FORMAT = 10
Figure 26. Serial Audio—Left-Justified
AUD_IN[5]
CHANNEL A
CHANNEL B
SCLK
MSB
V
U
C
LSB
P
MSB
V
U
32 CLOCK SLOTS
C
P
32 CLOCK SLOTS
FRAME n
FRAME n + 1
AES3 DIRECT AUDIO
I2S FORMAT = 11
Figure 27. AES3 Direct Audio
t67
DSD_CLK
t68
t69
DSD[5:0]
Figure 28. DSD Timing
Rev. B | Page 17 of 64
10556-126
LSB
10556-127
AUD_IN[4:1]
ADV8003
Data Sheet
ABSOLUTE MAXIMUM RATINGS
Table 5.
Parameter
AVDD1, ADDD2, DVDD_IO to GND
DVDD, PVDDx, CVDD1, AVDD3,
DVDD_DDR, PVDD_DDR to GND
DVDD to Other 1.8 V Power Supplies 1
PVDD1 to Other 1.8 V Power Supplies1
PVDD2 to Other 1.8 V Power Supplies1
PVDD3 to Other 1.8 V Power Supplies1
PVDD5 to Other 1.8 V Power Supplies1
PVDD6 to Other 1.8 V Power Supplies1
CVDD1 to Other 1.8 V Power Supplies1
AVDD3 to Other 1.8 V Power Supplies1
DVDD_DDR to Other 1.8 V Power
Supplies1
PVDD_DDR to Other 1.8 V Power
Supplies1
Digital Inputs to GND
Serial Video Inputs to GND
DDR_IO and DDR_VREF to GND
5 V Tolerant Digital Inputs to GND 2
1.8 V Analog Inputs to GND
3.3 V Analog Inputs to GND
HDMI Digital Outputs to GND
Digital Outputs Voltage to GND
Analog Outputs Voltage to GND 3
Maximum Junction Temperature (TJ MAX)
Storage Temperature Range
Infrared Reflow Soldering (20 sec)
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Rating
3.9 V
2.2 V
−0.3 V to +0.3 V
−0.3 V to +0.3 V
−0.3 V to +0.3 V
−0.3 V to +0.3 V
−0.3 V to +0.3 V
−0.3 V to +0.3 V
−0.3 V to +0.3 V
−0.3 V to +0.3 V
−0.3 V to +0.3 V
ESD CAUTION
−0.3 V to +0.3 V
−0.3 V to DVDD_IO + 0.3 V
−0.3 V to CVDD1 + 0.3 V
−0.3 V to DVDD_DDR + 0.3 V
−0.3 V to +5.5 V
−0.3 V to AVDD3 + 0.3 V
−0.3 V to AVDD2 + 0.3 V
−0.3 V to AVDD3 + 0.3 V
−0.3 V to DVDD_IO + 0.3 V
−0.3 V to AVDD2 + 0.3 V
125°C
−65°C to+150°C
260°C
1.8 V power supplies include DVDD, PVDD1, PVDD2, PVDD3, PVDD5, PVDD6,
CVDD1, AVDD3, DVDD_DDR, and PVDD_DR.
The following inputs are 5 V tolerant: CEC1, CEC2, DDC1_SCL, DDC2_SCL,
DDC1_SDA, DDC2_SDA, HEAC_1−, HEAC_1+, HEAC_2−, HEAC_2+, RX_5V,
and RX_HPD.
3
Except the ELPF1 and ELPF2 outputs, which are kept to −0.3 V to PVDD3 +
0.3 V; the RTERM output, which is kept to −0.3 V to CVDD1 + 0.3 V; and the
R_TX1 and R_TX2 outputs, which are kept to −0.3 V to PVDD5 + 0.3 V.
1
2
Rev. B | Page 18 of 64
Data Sheet
ADV8003
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
2
3
4
5
6
9
10
A
OSD_
DE
OSD_
CLK/
EXT_
CLK
AUD_
IN[1]
AUD_
IN[2]
AUD_
IN[5]
ARC2_
OUT MOSI1
SCK2
CS2
B
OSD_
IN[21]/
EXT_
DIN[5]
OSD_
IN[22]/
EXT_
DIN[6]
OSD_
VS
AUD_
IN[0]
AUD_
IN[3]
SFL
ARC1_
MISO1
OUT
MOSI2 MISO2
C
OSD_
IN[19]/
EXT_
DIN[3]
OSD_
IN[20]/
EXT_
DIN[4]
GND
AUD_
IN[4]
DSD_
CLK
SCLK
SCL
SCK1
GND
INT0
PDN
GND
D
OSD_
IN[16]/
EXT_
DIN[0]
OSD_
IN[17]/
EXT_
DIN[1]
OSD_
IN[18]/
EXT_
DIN[2]
GND
DVDD_
IO
MCLK
SDA
CS1
GND
INT1
INT2
DVDD_
IO
OSD_
IN[15]/
VBI_CS
DVDD_
IO
E
OSD_
OSD_
IN[13]/
IN[14]/
VBI_SCK VBI_MOSI
7
8
11
12
14
15
RESET XTALN PVDD2
NC
NC
XTALP PVDD1
NC
NC
GND
RX_CP RX_0P RX_1P
GND
NC
NC
RX_
HPD
AVDD1
GND
TEST1
NC
NC
RX_5V
NC
NC
ALSB
13
16
17
18
19
20
21
22
23
RX_2N CVDD1 RSET1
VREF
A
COMP1
DAC4
B
AVDD1 AVDD1
DAC5
DAC6
C
RTERM AVDD2 AVDD2
DAC1
DAC2
D
COMP2
DAC3
E
RSET2 PVDD3
GND
CEC1
F
GND
AVDD3
G
CVDD1 RX_CN RX_0N RX_1N
GND
RX_2P
TEST2
GND
GND
F
OSD_
IN[9]
OSD_
IN[10]
OSD_
IN[11]
OSD_
IN[12]
G
OSD_
IN[5]
OSD_
IN[6]
OSD_
IN[7]
OSD_
IN[8]
GND
GND
GND
DVDD
GND
GND
DVDD
GND
GND
GND
GND
ELPF1
ELPF2
H
OSD_
IN[1]
OSD_
IN[2]
OSD_
IN[3]
OSD_
IN[4]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
TX1_2+ TX1_2–
H
OSD_
HS
OSD_
IN[0]
DVDD
GND
GND
GND
GND
GND
GND
GND
GND
GND
DVDD
DDC1_
SDA
GND
TX1_1+ TX1_1–
J
DVDD_ DVDD_
IO
IO
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
DDC1_
SCL
J
DE
HS
K
VS
PCLK
GND
TX1_0+ TX1_0–
K
L
P[32]
P[33]
P[34]
P[35]
DVDD
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
HPD_
TX1
GND
TX1_C+ TX1_C–
L
M
P[28]
P[29]
P[30]
P[31]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
R_TX1
PVDD5
HEAC_ HEAC_
1–
1+
M
N
P[24]
P[25]
P[26]
P[27]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
CEC2
PVDD5 AVDD3
DVDD
DDC2_
SCL
GND
TX2_2+ TX2_2–
P
GND
TX2_1+ TX2_1–
R
P
P[20]
P[21]
P[22]
DVDD
P[23]
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
N
R
P[16]
P[17]
P[18]
P[19]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
DDC2_
SDA
T
P[14]
P[15]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
HPD_
TX2
GND
TX2_0+ TX2_0–
T
U
P[10]
P[11]
P[12]
P[13]
GND
GND
DVDD
GND
GND
DVDD
GND
GND
DVDD
GND
GND
R_TX2
GND
TX2_C+ TX2_C–
U
V
P[6]
P[7]
P[8]
P[9]
GND
PVDD6
HEAC_ HEAC_
2+
2–
V
W
P[2]
P[3]
P[4]
P[5]
TEST3
Y
P[0]
P[1]
DDR_
DQS[2]
GND
AA
DDR_
DQ[18]
AB
DDR_
DDR_
DDR_
DQ[21] DQ[19] DQ[17]
AC
DDR_ DDR_
DDR_
DDR_
DDR_
DDR_ DDR_
DDR_
DQ[16] DQ[20] DQ[22] DQ[25] DQ[28] DQ[27] DQ[24] A[9]
1
GND
2
GND
3
DDR_
CAS
DVDD_
DDR
DDR_
A[2]
GND
DDR_
CS
DVDD_
DDR
DDR_
CK
DDR_
A[12]
DDR_
A[6]
DDR_
A[3]
DDR_
A[0]
DDR_
BA[0]
DDR_
RAS
DDR_
CKE
DDR_
A[5]
DDR_
A[7]
DDR_
A[1]
DDR_
A[10]
DDR_
BA[1]
DDR_
BA[2]
DDR_
WE
DDR_
VREF
9
10
12
13
14
15
16
GND
DDR_
A[11]
DDR_ DDR_ DVDD_ DDR_
DQS[2] DQ[26] DDR DQS[3]
NC/
GND
DDR_
DM[2]
4
DDR_
DQ[30]
5
DDR_
DM[3]
6
DDR_ DDR_
DQ[31] DQ[29]
7
8
DDR_
CK
GND
DDR_ DVDD_ DDR_
DQS[3]
DQ[23] DDR
DVDD_
DDR
DDR_
A[4]
DDR_
A[8]
11
DVDD_
DDR
GND
DDR_
DQ[9]
GND
DDR_ DVDD_
DQ[11]
DDR
GND
W
DDR_
DQ[6]
PVDD_
DDR
GND
Y
AA
DDR_
DM[1]
DDR_
DM[0]
GND
GND
DDR_
DQ[3]
DDR_
DQ[13]
DDR_
DQ[0]
DDR_
DQ[5]
DDR_
DQS[0]
DDR_
DQ[4]
AB
DDR_
DDR_
DDR_
DQ[10] DQS[1] DQ[15]
DDR_
DQ[7]
DDR_
DQ[2]
DDR_
DQS[0]
DDR_
DQ[1]
AC
20
21
22
23
DDR_
DDR_
DQ[12] DQS[1]
17
Figure 29. ADV8003KBCZ-8 and ADV8003KBCZ-7 Pin Configuration
Rev. B | Page 19 of 64
DVDD_ DDR_
DQ[14]
DDR
NC
PVDD6 AVDD3
DDR_
DQ[8]
18
19
10556-025
1
OSD_
IN[23]/
EXT_
DIN[7]
ADV8003
Data Sheet
Table 6. ADV8003KBCZ-8 and ADV8003KBCZ-7 Pin Function Descriptions
Pin No.
A1
Mnemonic
OSD_IN[23]/EXT_DIN[7]
A2
A3
OSD_DE
OSD_CLK/EXT_CLK
Type
OSD video input/
miscellaneous digital
OSD video sync
OSD video sync
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
AUD_IN[1]
AUD_IN[2]
AUD_IN[5]
ARC2_OUT
MOSI1
SCK2
CS2
RESET
XTALN
PVDD2
Audio input
Audio input
Audio input
Audio output
Serial port control
Serial port control
Serial port control
Miscellaneous digital
Miscellaneous digital 1
Power
A14
A15
A16
A17
A18
A19
A20
A21
A22
NC
NC
CVDD1
RX_CN
RX_0N
RX_1N
RX_2N
CVDD1
RSET1
N/A
N/A
Power
Rx input
Rx input
Rx input
Rx input
Power
A23
VREF
Miscellaneous analog1
B1
OSD_IN[21]/EXT_DIN[5]
B2
OSD_IN[22]/EXT_DIN[6]
B3
B4
B5
B6
B7
B8
B9
B10
B11
OSD_VS
AUD_IN[0]
AUD_IN[3]
SFL
ARC1_OUT
MISO1
MOSI2
MISO2
ALSB
OSD video input/
miscellaneous digital
OSD video input/
miscellaneous digital
OSD video sync
Audio input
Audio input
SFL
Audio output
Serial port control
Serial port control
Serial port control
I2C control
B12
B13
B14
B15
B16
B17
B18
B19
B20
B21
B22
B23
XTALP
PVDD1
NC
NC
GND
RX_CP
RX_0P
RX_1P
RX_2P
GND
COMP1
DAC4
Miscellaneous analog1
Miscellaneous digital1
Power
N/A
N/A
GND
Rx input
Rx input
Rx input
Rx input
GND
Miscellaneous analog1
Analog video output
Description
External OSD Video Pixel Input Port (OSD_IN[23])/Additional TTL Input for External
CCIR 656 Video Data (EXT_DIN[7]).
Data Enable for the OSD Input Port.
Pixel Clock for the OSD Input Port (OSD_CLK)/Pixel Clock for External Video Data
(EXT_CLK).
I2S0/DSD1 Audio Input.
I2S1/DSD2 Audio Input.
LRCLK/DSD5 Audio Input.
Audio Return Channel for HDMI Tx2.
Master Out Slave In (Serial Port 1). Serial Port 1 is used for OSD control.
Serial Clock (Serial Port 2). Serial Port 2 is used for the external flash ROM.
Chip Select (Serial Port 2). Serial Port 2 is used for the external flash ROM.
Reset Pin.
Crystal Input.
PLL Digital Supply Voltage (1.8 V).
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Comparator Supply Voltage (1.8 V).
Rx Clock Complement Input.
Rx Channel 0 Complement Input.
Rx Channel 1 Complement Input.
Rx Channel 2 Complement Input.
Comparator Supply Voltage (1.8 V).
Resistor Current Setting for Encoder DACs: DAC1, DAC2, and DAC3. Place the RSET1
resistor as close as possible to the ADV8003.
Optional External Voltage Reference Input for DACs or Voltage Reference Output. Place
VREF voltage components as close as possible to the ADV8003.
External OSD Video Pixel Input Port (OSD_IN[21])/Additional TTL Input for External
CCIR 656 Video Data (EXT_DIN[5]).
External OSD Video Pixel Input Port (OSD_IN[22])/Additional TTL Input for External
CCIR 656 Video Data (EXT_DIN[6]).
Vertical Sync for the OSD Input Port.
S/PDIF/DSD0 Audio Input.
I2S2/DSD3 Audio Input.
Subcarrier Frequency Lock Signal (SFL).
Audio Return Channel for HDMI Tx1.
Master In Slave Out (Serial Port 1). Serial Port 1 is used for OSD control.
Master Out Slave In (Serial Port 2). Serial Port 2 is used for the external flash ROM.
Master In Slave Out (Serial Port 2). Serial Port 2 is used for the external flash ROM.
Sets LSB of I2C address. When the ALSB pin is set low, the I2C address is 0x18; when the
ALSB pin is set high, the I2C address is 0x1A.
Crystal Input.
PLL Analog Supply Voltage (1.8 V).
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Ground.
Rx Clock True Input.
Rx Channel 0 True Input.
Rx Channel 1 True Input.
Rx Channel 2 True Input.
Ground.
Compensation Pin. Connect a 2.2 nF capacitor from COMP1 to AVDD2.
Encoder DAC4 Output.
Rev. B | Page 20 of 64
Data Sheet
ADV8003
Pin No.
C1
Mnemonic
OSD_IN[19]/EXT_DIN[3]
C2
OSD_IN[20]/EXT_DIN[4]
C3
C4
C5
C6
C7
C8
C9
C10
C11
C12
C13
C14
C15
C16
C17
C18
C19
C20
C21
C22
C23
D1
GND
AUD_IN[4]
DSD_CLK
SCLK
SCL
SCK1
GND
INT0
PDN
GND
GND
NC
NC
RX_HPD
AVDD1
GND
GND
AVDD1
AVDD1
DAC5
DAC6
OSD_IN[16]/EXT_DIN[0]
D2
OSD_IN[17]/EXT_DIN[1]
D3
OSD_IN[18]/EXT_DIN[2]
D4
D5
D6
D7
D8
D9
D10
GND
DVDD_IO
MCLK
SDA
CS1
GND
INT1
Type
OSD video input/
miscellaneous digital
OSD video input/
miscellaneous digital
GND
Audio input
Audio input
Audio input
I2C control
Serial port control
GND
Miscellaneous digital
Miscellaneous digital
GND
GND
N/A
N/A
Rx input
Power
GND
GND
Power
Power
Analog video output
Analog video output
OSD video input/
miscellaneous digital
OSD video input/
miscellaneous digital
OSD video input/
miscellaneous digital
GND
Power
Audio input
I2C control
Serial port control
GND
Miscellaneous digital
D11
INT2
Miscellaneous digital
D12
D13
D14
D15
D16
D17
D18
D19
DVDD_IO
TEST1
NC
NC
RX_5V
NC
NC
RTERM
Power
Miscellaneous digital
N/A
N/A
Rx input
N/A
N/A
HDMI Rx input
D20
D21
D22
D23
AVDD2
AVDD2
DAC1
DAC2
Power
Power
Analog video output
Analog video output
Description
External OSD Video Pixel Input Port (OSD_IN[19])/Additional TTL Input for External
CCIR 656 Video Data (EXT_DIN[3]).
External OSD Video Pixel Input Port (OSD_IN[20])/Additional TTL Input for External
CCIR 656 Video Data (EXT_DIN[4]).
Ground.
I2S3/DSD4 Audio Input.
DSD Audio Clock Input.
I2S Bit Clock Input.
I2C Clock Input. SCL is open drain; use a 4.7 kΩ resistor to connect this pin to a 3.3 V supply.
Serial Clock (Serial Port 1). Serial Port 1 is used for OSD control.
Ground.
Interrupt Pin 0. When status bits change, this pin is triggered.
Power-Down. This pin controls the power state of the ADV8003.
Ground.
Ground.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Hot Plug Assert Signal Output for the Rx Input.
HDMI Rx Inputs Analog Supply (3.3 V).
Ground.
Ground.
HDMI Rx Inputs Analog Supply (3.3 V).
HDMI Rx Inputs Analog Supply (3.3 V).
Encoder DAC5 Output.
Encoder DAC6 Output.
External OSD Video Pixel Input Port (OSD_IN[16])/Additional TTL Input for External
CCIR 656 Video Data (EXT_DIN[0]).
External OSD Video Pixel Input Port (OSD_IN[17])/Additional TTL Input for External
CCIR 656 Video Data (EXT_DIN[1]).
External OSD Video Pixel Input Port (OSD_IN[18])/Additional TTL Input for External
CCIR 656 Video Data (EXT_DIN[2]).
Ground.
Digital Interface Supply (3.3 V).
MCLK for S/PDIF Input Audio.
I2C Data Input. SDA is open drain; use a 4.7 kΩ resistor to connect this pin to a 3.3 V supply.
Chip Select (Serial Port 1). Serial Port 1 is used for OSD control.
Ground.
Interrupt Pin for HDMI Transmitter Outputs. When status bits change, an interrupt is
generated on this pin.
Interrupt Pin for HDMI Receiver Input Lines. When status bits change, an interrupt is
generated on this pin.
Digital Interface Supply (3.3 V).
Test Pin. Float this pin.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
5 V Detect Pin for the Rx Input.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
This pin sets internal termination resistance. Use a 500 Ω resistor between this pin and
GND. Place the RTERM resistor as close as possible to the ADV8003.
Analog Power Supply (3.3 V).
Analog Power Supply (3.3 V).
Encoder DAC1 Output.
Encoder DAC2 Output.
Rev. B | Page 21 of 64
ADV8003
Data Sheet
Pin No.
E1
Mnemonic
OSD_IN[13]/VBI_SCK
E2
OSD_IN[14]/VBI_MOSI
E3
OSD_IN[15]/VBI_CS
E4
E20
E21
E22
E23
F1
F2
F3
F4
DVDD_IO
TEST2
GND
COMP2
DAC3
OSD_IN[9]
OSD_IN[10]
OSD_IN[11]
OSD_IN[12]
F20
RSET2
Type
OSD video input/
miscellaneous digital
OSD video input/
miscellaneous digital
OSD video input/
miscellaneous digital
Power
Miscellaneous analog
GND
Miscellaneous analog1
Analog video output
OSD video input
OSD video input
OSD video input
OSD video input/
miscellaneous digital
Miscellaneous analog1
F21
F22
F23
G1
G2
G3
G4
G7
G8
G9
G10
G11
G12
G13
G14
G15
G16
G17
G20
G21
G22
G23
H1
H2
H3
H4
H7
H8
H9
H10
H11
H12
H13
H14
H15
H16
H17
H20
PVDD3
GND
CEC1
OSD_IN[5]
OSD_IN[6]
OSD_IN[7]
OSD_IN[8]
GND
GND
GND
DVDD
GND
GND
DVDD
GND
GND
GND
GND
ELPF1
ELPF2
GND
AVDD3
OSD_IN[1]
OSD_IN[2]
OSD_IN[3]
OSD_IN[4]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
Power
GND
HDMI Tx1
OSD video input
OSD video input
OSD video input
OSD video input
GND
GND
GND
Power
GND
GND
Power
GND
GND
GND
GND
Miscellaneous analog1
Miscellaneous analog1
GND
Power
OSD video input
OSD video input
OSD video input
OSD video input
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
Description
External OSD Video Pixel Input Port (OSD_IN[13])/Serial Clock for VBI Data Serial Port
(VBI_SCK).
External OSD Video Pixel Input Port (OSD_IN[14])/Master Out Slave In for VBI Data
Serial Port (VBI_MOSI).
External OSD Video Pixel Input Port (OSD_IN[15])/Chip Select for VBI Data Serial Port
(VBI_CS).
Digital Interface Supply (3.3 V).
Test Pin. Float this pin.
Ground.
Compensation Pin. Connect a 2.2 nF capacitor to AVDD2.
Encoder DAC3 Output.
External OSD Video Pixel Input Port (OSD_IN[9]).
External OSD Video Pixel Input Port (OSD_IN[10]).
External OSD Video Pixel Input Port (OSD_IN[11]).
External OSD Video Pixel Input Port (OSD_IN[12]).
Resistor Current Setting for Encoder DACs: DAC4, DAC5, and DAC6. Place the RSET2
resistor as close as possible to the ADV8003.
PLL Supply (1.8 V).
Ground.
HDMI Tx1 Consumer Electronics Control (CEC).
External OSD Video Pixel Input Port (OSD_IN[5]).
External OSD Video Pixel Input Port (OSD_IN[6]).
External OSD Video Pixel Input Port (OSD_IN[7]).
External OSD Video Pixel Input Port (OSD_IN[8]).
Ground.
Ground.
Ground.
Digital Power Supply (1.8 V).
Ground.
Ground.
Digital Power Supply (1.8 V).
Ground.
Ground.
Ground.
Ground.
External Loop Filter for PLL 1. Connect to PVDD3.
External Loop Filter for PLL 2. Connect to PVDD3.
Ground.
HDMI Analog Power Supply (1.8 V).
External OSD Video Pixel Input Port (OSD_IN[1]).
External OSD Video Pixel Input Port (OSD_IN[2]).
External OSD Video Pixel Input Port (OSD_IN[3]).
External OSD Video Pixel Input Port (OSD_IN[4]).
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Rev. B | Page 22 of 64
Data Sheet
ADV8003
Pin No.
H21
H22
H23
J1
J2
J3
J4
J7
J8
J9
J10
J11
J12
J13
J14
J15
J16
J17
J20
Mnemonic
GND
TX1_2+
TX1_2−
DE
HS
OSD_HS
OSD_IN[0]
DVDD
GND
GND
GND
GND
GND
GND
GND
GND
GND
DVDD
DDC1_SDA
Type
GND
HDMI Tx1
HDMI Tx1
Digital video sync
Digital video sync
Digital video sync
OSD video input
Power
GND
GND
GND
GND
GND
GND
GND
GND
GND
Power
HDMI Tx1
J21
J22
J23
K1
K2
K3
K4
K7
K8
K9
K10
K11
K12
K13
K14
K15
K16
K17
K20
GND
TX1_1+
TX1_1−
VS
PCLK
DVDD_IO
DVDD_IO
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
DDC1_SCL
GND
HDMI Tx1
HDMI Tx1
Digital video sync
Digital video sync
Power
Power
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
HDMI Tx1
K21
K22
K23
L1
L2
L3
L4
L7
L8
L9
L10
L11
L12
L13
L14
L15
GND
TX1_0+
TX1_0−
P[32]
P[33]
P[34]
P[35]
DVDD
GND
GND
GND
GND
GND
GND
GND
GND
GND
HDMI Tx1
HDMI Tx1
Digital video input
Digital video input
Digital video input
Digital video input
Power
GND
GND
GND
GND
GND
GND
GND
GND
Description
Ground.
HDMI1 Channel 2 True Output.
HDMI1 Channel 2 Complementary Output.
Data Enable for Digital Input Video.
Horizontal Sync for Digital Input Video.
Horizontal Sync for the OSD Input Port (OSD_HS).
External OSD Video Pixel Input Port (OSD_IN[0]).
Digital Power Supply (1.8 V).
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Digital Power Supply (1.8 V).
HDCP Slave Serial Data for HDMI Tx1. This pin is open drain; use a 2 kΩ resistor to
connect this pin to the HDMI Tx 5 V supply.
Ground.
HDMI1 Channel 1 True Output.
HDMI1 Channel 1 Complementary Output.
Vertical Sync for Digital Input Video.
Pixel Clock for Digital Input Video.
Digital Interface Supply (3.3 V).
Digital Interface Supply (3.3 V).
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
HDCP Slave Serial Clock for HDMI Tx1. This pin is open drain; use a 2 kΩ resistor to
connect this pin to the HDMI Tx 5 V supply.
Ground.
HDMI1 Channel 0 True Output.
HDMI1 Channel 0 Complementary Output.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Power Supply (1.8 V).
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Rev. B | Page 23 of 64
ADV8003
Data Sheet
Pin No.
L16
L17
L20
L21
L22
L23
M1
M2
M3
M4
M7
M8
M9
M10
M11
M12
M13
M14
M15
M16
M17
M20
Mnemonic
GND
GND
HPD_TX1
GND
TX1_C+
TX1_C−
P[28]
P[29]
P[30]
P[31]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
R_TX1
Type
GND
GND
HDMI Tx1
GND
HDMI Tx1
HDMI Tx1
Digital video input
Digital video input
Digital video input
Digital video input
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
HDMI Tx11
M21
M22
M23
N1
N2
N3
N4
N7
N8
N9
N10
N11
N12
N13
N14
N15
N16
N17
N20
N21
N22
N23
P1
P2
P3
P4
P7
P8
P9
P10
P11
P12
P13
PVDD5
HEAC_1+
HEAC_1−
P[24]
P[25]
P[26]
P[27]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
CEC2
PVDD5
AVDD3
NC
P[20]
P[21]
P[22]
P[23]
DVDD
GND
GND
GND
GND
GND
GND
Power1
HDMI Tx1
HDMI Tx1
Digital video input
Digital video input
Digital video input
Digital video input
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
HDMI Tx2
Power1
Power
N/A
Digital video input
Digital video input
Digital video input
Digital video input
Power
GND
GND
GND
GND
GND
GND
Description
Ground.
Ground.
Hot Plug Assert Signal Input for HDMI Tx1.
Ground.
HDMI1 Clock True Output.
HDMI1 Clock Complementary Output.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Sets Internal Reference Currents. Place a 470 Ω resistor (1% tolerance) between this pin and
ground, as close as possible to the ADV8003.
HDMI Tx PLL Power Supply (1.8 V).
HDMI Tx1 HEAC+ from the HDMI Connector.
HDMI Tx1 HEAC− from the HDMI Connector.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
HDMI Tx2 Consumer Electronics Control (CEC).
HDMI Tx PLL Power Supply (1.8 V).
HDMI Analog Power Supply (1.8 V).
No Connect. Do not connect to this pin.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Power Supply (1.8 V).
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Rev. B | Page 24 of 64
Data Sheet
ADV8003
Pin No.
P14
P15
P16
P17
P20
Mnemonic
GND
GND
GND
DVDD
DDC2_SCL
Type
GND
GND
GND
Power
HDMI Tx2
P21
P22
P23
R1
R2
R3
R4
R7
R8
R9
R10
R11
R12
R13
R14
R15
R16
R17
R20
GND
TX2_2+
TX2_2−
P[16]
P[17]
P[18]
P[19]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
DDC2_SDA
GND
HDMI Tx2
HDMI Tx2
Digital video input
Digital video input
Digital video input
Digital video input
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
HDMI Tx2
R21
R22
R23
T1
T2
T3
T4
T7
T8
T9
T10
T11
T12
T13
T14
T15
T16
T17
T20
T21
T22
T23
U1
U2
U3
U4
U7
U8
U9
U10
GND
TX2_1+
TX2_1−
P[14]
P[15]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
HPD_TX2
GND
TX2_0+
TX2_0−
P[10]
P[11]
P[12]
P[13]
GND
GND
DVDD
GND
GND
HDMI Tx2
HDMI Tx2
Digital video input
Digital video input
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
HDMI Tx2
GND
HDMI Tx2
HDMI Tx2
Digital video input
Digital video input
Digital video input
Digital video input
GND
GND
Power
GND
Description
Ground.
Ground.
Ground.
Digital Power Supply (1.8 V).
HDCP Slave Serial Clock for HDMI Tx2. This pin is open drain; use a 2 kΩ resistor to
connect this pin to the HDMI Tx 5 V supply.
Ground.
HDMI2 Channel 2 True Output.
HDMI2 Channel 2 Complementary Output.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
HDCP Slave Serial Data for HDMI Tx2. This pin is open drain; use a 2 kΩ resistor to
connect this pin to the HDMI Tx 5 V supply.
Ground.
HDMI2 Channel 1 True Output.
HDMI2 Channel 1 Complementary Output.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Hot Plug Assert Signal Input for HDMI Tx2.
Ground.
HDMI2 Channel 0 True Output.
HDMI2 Channel 0 Complementary Output.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Ground.
Ground.
Digital Power Supply (1.8 V).
Ground.
Rev. B | Page 25 of 64
ADV8003
Data Sheet
Pin No.
U11
U12
U13
U14
U15
U16
U17
U20
Mnemonic
GND
DVDD
GND
GND
DVDD
GND
GND
R_TX2
Type
GND
Power
GND
GND
Power
GND
GND
HDMI Tx21
U21
U22
U23
V1
V2
V3
V4
V20
V21
V22
V23
W1
W2
W3
W4
W20
W21
W22
W23
Y1
Y2
Y3
Y4
Y5
Y6
Y7
Y8
Y9
Y10
Y11
Y12
Y13
Y14
Y15
Y16
Y17
Y18
Y19
Y20
Y21
Y22
Y23
AA1
AA2
AA3
AA4
GND
TX2_C+
TX2_C−
P[6]
P[7]
P[8]
P[9]
GND
PVDD6
HEAC_2+
HEAC_2−
P[2]
P[3]
P[4]
P[5]
TEST3
PVDD6
AVDD3
NC
P[0]
P[1]
DDR_DQS[2]
GND
DDR_DQ[23]
DVDD_DDR
DDR_DQS[3]
GND
DDR_A[11]
DVDD_DDR
DDR_A[4]
GND
DDR_CAS
DVDD_DDR
DDR_CK
GND
DDR_DQ[9]
DVDD_DDR
DDR_DQ[14]
GND
DDR_DQ[6]
PVDD_DDR
GND
DDR_DQ[18]
GND
GND
DDR_DQS[2]
GND
HDMI Tx21
HDMI Tx21
Digital video input
Digital video input
Digital video input
Digital video input
GND
Power1
HDMI Tx2
HDMI Tx2
Digital video input
Digital video input
Digital video input
Digital video input
Miscellaneous digital
Power1
Power
N/A
Digital video input
Digital video input
DDR interface
GND
DDR interface
Power
DDR interface
GND
DDR interface
Power
DDR interface
GND
DDR interface
Power
DDR interface
GND
DDR interface
Power
DDR interface
GND
DDR interface
Power
GND
DDR interface
GND
GND
DDR interface
Description
Ground.
Digital Power Supply (1.8 V).
Ground.
Ground.
Digital Power Supply (1.8 V).
Ground.
Ground.
Sets internal reference currents. Place a 470 Ω resistor (1% tolerance) between this pin
and ground, as close as possible to the ADV8003.
Ground.
HDMI2 Clock True Output.
HDMI2 Clock Complementary Output.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Ground.
HDMI Tx PLL Power Supply (1.8 V).
HDMI Tx2 HEC+ from HDMI Connector.
HDMI Tx2 HEC− from HDMI Connector.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Test Pin. Connect this pin to ground through a 0.1 µF capacitor.
HDMI Tx PLL Power Supply (1.8 V).
HDMI Analog Power Supply (1.8 V).
No Connect. Do not connect to this pin.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Data Strobe for DDR Data Bytes[23:16].
Ground.
Data Line. Interface to external RAM data lines.
DDR Interface Supply (1.8 V).
Data Strobe for DDR Data Bytes[31:24].
Ground.
Address Line. Interface to external RAM address lines.
DDR Interface Supply (1.8 V).
Address Line. Interface to external RAM address lines.
Ground.
Column Address Strobe for DDR Memory.
DDR Interface Supply (1.8 V).
DDR Memory Clock. Interface to external DDR RAM clock lines.
Ground.
Data Line. Interface to external RAM data lines.
DDR Interface Supply (1.8 V).
Data Line. Interface to external RAM data lines.
Ground.
Data Line. Interface to external RAM data lines.
DDR Interface PLL Supply (1.8 V).
Ground.
Data Line. Interface to external RAM data lines.
Ground.
Ground.
Data Strobe for DDR Data Bytes[23:16].
Rev. B | Page 26 of 64
Data Sheet
ADV8003
Pin No.
AA5
AA6
AA7
AA8
Mnemonic
DDR_DQ[26]
DVDD_DDR
DDR_DQS[3]
NC/GND
Type
DDR interface
Power
DDR interface
No connect/GND
AA9
AA10
AA11
AA12
AA13
AA14
AA15
AA16
AA17
AA18
AA19
AA20
AA21
AA22
AA23
AB1
AB2
AB3
AB4
AB5
AB6
AB7
AB8
AB9
AB10
AB11
AB12
AB13
AB14
AB15
AB16
AB17
AB18
AB19
AB20
AB21
AB22
AB23
AC1
AC2
AC3
AC4
AC5
AC6
AC7
AC8
AC9
AC10
AC11
AC12
AC13
DDR_A[8]
DVDD_DDR
DDR_A[2]
GND
DDR_CS
DVDD_DDR
DDR_CK
GND
DDR_DQ[11]
DVDD_DDR
DDR_DM[1]
DDR_DM[0]
GND
GND
DDR_DQ[3]
DDR_DQ[21]
DDR_DQ[19]
DDR_DQ[17]
DDR_DM[2]
DDR_DQ[30]
DDR_DM[3]
DDR_DQ[31]
DDR_DQ[29]
DDR_A[12]
DDR_A[6]
DDR_A[3]
DDR_A[0]
DDR_BA[0]
DDR_RAS
DDR_CKE
DDR_DQ[12]
DDR_DQS[1]
DDR_DQ[8]
DDR_DQ[13]
DDR_DQ[0]
DDR_DQ[5]
DDR_DQS[0]
DDR_DQ[4]
DDR_DQ[16]
DDR_DQ[20]
DDR_DQ[22]
DDR_DQ[25]
DDR_DQ[28]
DDR_DQ[27]
DDR_DQ[24]
DDR_A[9]
DDR_A[5]
DDR_A[7]
DDR_A[1]
DDR_A[10]
DDR_BA[1]
DDR interface
Power
DDR interface
GND
DDR interface
Power
DDR interface
GND
DDR interface
Power
DDR interface
DDR interface
GND
GND
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
Description
Data Line. Interface to external RAM data lines.
DDR Interface Supply (1.8 V).
Data Strobe for DDR Data Bytes[31:24].
For new ADV8003 designs, do not connect to this pin. For designs that must maintain
consistency with the ADV8002, this pin can be grounded.
Address Line. Interface to external RAM address lines.
DDR Interface Supply (1.8 V).
Address Line. Interface to external RAM address lines.
Ground.
DDR Chip Select. Interface to external DDR RAM chip selects.
DDR Interface Supply (1.8 V).
DDR Memory Clock. Interface to external DDR RAM clock lines.
Ground.
Data Line. Interface to external RAM data lines.
DDR Interface Supply (1.8 V).
Data Mask for Data Lines[15:8].
Data Mask for Data Lines[7:0].
Ground.
Ground.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Mask for Data Lines[23:16].
Data Line. Interface to external RAM data lines.
Data Mask for Data Lines[31:25].
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Bank Address Line. Indicates which data bank to write/read from.
Row Address Strobe for DDR Memory.
Clock Enable for External DDR Memory.
Data Line. Interface to external RAM data lines.
Data Strobe for DDR Data Bytes[15:8].
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Strobe for DDR Data Bytes[7:0].
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Bank Address Line. Indicates which data bank to write/read from.
Rev. B | Page 27 of 64
ADV8003
Pin No.
AC14
AC15
AC16
AC17
AC18
AC19
AC20
AC21
AC22
AC23
1
Mnemonic
DDR_BA[2]
DDR_WE
DDR_VREF
DDR_DQ[10]
DDR_DQS[1]
DDR_DQ[15]
DDR_DQ[7]
DDR_DQ[2]
DDR_DQS[0]
DDR_DQ[1]
Data Sheet
Type
DDR interface
DDR interface
DDR interface1
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
Description
Bank Address Line. Indicates which data bank to write/read from.
Write Enable Signal for DDR RAM.
Reference Voltage for DDR RAM.
Data Line. Interface to external RAM data lines.
Data Strobe for DDR Data Bytes[15:8].
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Strobe for DDR Data Bytes[7:0].
Data Line. Interface to external RAM data lines.
Sensitive node. Careful layout is important. Keep the associated circuitry as close as possible to the ADV8003.
Rev. B | Page 28 of 64
ADV8003
1
2
3
4
5
6
7
8
9
10
A
OSD_
IN[23]/
EXT_
DIN[7]
OSD_
DE
OSD_
CLK/
EXT_
CLK
AUD_
IN[1]
AUD_
IN[2]
AUD_
IN[5]
TEST4
MOSI1
SCK2
CS2
B
OSD_
IN[21]/
EXT_
DIN[5]
OSD_
IN[22]/
EXT_
DIN[6]
OSD_
VS
AUD_
IN[0]
AUD_
IN[3]
SFL
C
OSD_
IN[19]/
EXT_
DIN[3]
OSD_
IN[20]/
EXT_
DIN[4]
GND
AUD_
IN[4]
DSD_
CLK
SCLK
SCL
SCK1
GND
INT0
PDN
GND
D
OSD_
IN[16]/
EXT_
DIN[0]
OSD_
IN[17]/
EXT_
DIN[1]
OSD_
IN[18]/
EXT_
DIN[2]
GND
DVDD_
IO
MCLK
SDA
CS1
GND
INT1
INT2
DVDD_
IO
E
OSD_
OSD_
OSD_
IN[13]/
IN[14]/
IN[15]/
VBI_SCK VBI_MOSI VBI_CS
22
23
RX_2N CVDD1
NC
NC
A
RX_CP RX_0P RX_1P
RX_2P
NC
NC
B
RX_
HPD
AVDD1
GND
AVDD1 AVDD1
NC
NC
C
RX_5V
NC
NC
RTERM AVDD2 AVDD2
NC
NC
D
DVDD_
IO
TEST2
GND
NC
NC
E
NC
PVDD3
GND
CEC1
F
GND
AVDD3
G
ARC1_
MISO1
OUT
MOSI2 MISO2
11
12
13
14
15
NC
NC
NC
NC
GND
GND
NC
NC
TEST1
NC
NC
RESET XTALN PVDD2
ALSB
XTALP PVDD1
16
17
18
19
CVDD1 RX_CN RX_0N RX_1N
GND
20
21
GND
F
OSD_
IN[9]
OSD_
IN[10]
OSD_
IN[11]
OSD_
IN[12]
G
OSD_
IN[5]
OSD_
IN[6]
OSD_
IN[7]
OSD_
IN[8]
GND
GND
GND
DVDD
GND
GND
DVDD
GND
GND
GND
GND
ELPF1
ELPF2
H
OSD_
IN[1]
OSD_
IN[2]
OSD_
IN[3]
OSD_
IN[4]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
TX1_2+ TX1_2–
H
J
DE
HS
OSD_
HS
OSD_
IN[0]
DVDD
GND
GND
GND
GND
GND
GND
GND
GND
GND
DVDD
DDC1_
SDA
GND
TX1_1+ TX1_1–
J
GND
DDC1_
SCL
GND
TX1_0+ TX1_0–
K
GND
HPD_
TX1
GND
TX1_C+ TX1_C–
L
HEAC_ HEAC_
PVDD5
1+
1–
M
PVDD5 AVDD3
NC
N
K
L
VS
P[32]
PCLK
P[33]
DVDD_ DVDD_
IO
IO
P[34]
GND
DVDD
P[35]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
M
P[28]
P[29]
P[30]
P[31]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
R_TX1
N
P[24]
P[25]
P[26]
P[27]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
P
P[20]
P[21]
P[22]
P[23]
DVDD
GND
GND
GND
GND
GND
GND
GND
GND
GND
DVDD
NC
GND
NC
NC
P
R
P[16]
P[17]
P[18]
P[19]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
GND
NC
NC
R
T
P[14]
P[15]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
GND
NC
NC
T
U
P[10]
P[11]
P[12]
P[13]
GND
GND
DVDD
GND
GND
DVDD
GND
GND
DVDD
GND
GND
NC
GND
NC
NC
U
V
P[6]
P[7]
P[8]
P[9]
GND
PVDD6
NC
NC
V
W
P[2]
P[3]
P[4]
P[5]
TEST3
NC
W
DDR_ DVDD_ DDR_
DQ[23] DDR
DQS[3]
DDR_ DDR_ DVDD_ DDR_
DQS[2] DQ[26] DDR DQS[3]
AB
DDR_
DDR_
DDR_
DQ[21] DQ[19] DQ[17]
AC
DDR_
DDR_
DDR_
DDR_ DDR_
DDR_
DDR_ DDR_
DQ[16] DQ[20] DQ[22] DQ[25] DQ[28] DQ[27] DQ[24] A[9]
4
5
6
DDR_ DDR_
DQ[31] DQ[29]
7
DVDD_
DDR
DDR_
CK
GND
DDR_ DVDD_
DQ[11]
DDR
DDR_
A[6]
DDR_
A[3]
DDR_
A[0]
DDR_
BA[0]
DDR_
RAS
DDR_
CKE
DDR_
DDR_
DQ[12] DQS[1]
DDR_
A[5]
DDR_
A[7]
DDR_
A[1]
DDR_
A[10]
DDR_
BA[1]
DDR_
BA[2]
DDR_
WE
DDR_
VREF
9
10
12
13
14
15
16
DDR_
A[12]
GND
3
DDR_
CS
DVDD_
DDR
GND
2
GND
DDR_
A[8]
DDR_
DQ[18]
1
DDR_
A[2]
NC/
GND
AA
DDR_
DM[3]
GND
DDR_
DQ[9]
GND
P[1]
DDR_
DQ[30]
DDR_
CK
DDR_
A[4]
P[0]
DDR_
DM[2]
GND
DVDD_
DDR
DVDD_
DDR
Y
GND
DDR_
CAS
DDR_
A[11]
DDR_
DQS[2]
8
11
GND
DDR_
DQ[6]
PVDD_
DDR
GND
Y
DDR_
DM[1]
DDR_
DM[0]
GND
GND
DDR_
DQ[3]
AA
DDR_
DQ[13]
DDR_
DQ[0]
DDR_
DQ[5]
DDR_
DQS[0]
DDR_
DQ[4]
AB
DDR_
DDR_
DDR_
DQ[10] DQS[1] DQ[15]
DDR_
DQ[7]
DDR_
DQ[2]
DDR_
DQS[0]
DDR_
DQ[1]
AC
20
21
22
23
17
Figure 30. ADV8003KBCZ-8B and ADV8003KBCZ-7B Pin Configuration
Rev. B | Page 29 of 64
DVDD_ DDR_
DQ[14]
DDR
PVDD6 AVDD3
DDR_
DQ[8]
18
19
10556-130
Data Sheet
ADV8003
Data Sheet
Table 7. ADV8003KBCZ-8B and ADV8003KBCZ-7B Pin Function Descriptions
Pin
No.
A1
Mnemonic
OSD_IN[23]/EXT_DIN[7]
A2
A3
OSD_DE
OSD_CLK/EXT_CLK
Type
OSD video input/
miscellaneous digital
OSD video sync
OSD video sync
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
AUD_IN[1]
AUD_IN[2]
AUD_IN[5]
TEST4
MOSI1
SCK2
CS2
RESET
XTALN
PVDD2
Audio input
Audio input
Audio input
Miscellaneous digital
Serial port control
Serial port control
Serial port control
Miscellaneous digital
Miscellaneous digital 1
Power
A14
A15
A16
A17
A18
A19
A20
A21
A22
A23
B1
NC
NC
CVDD1
RX_CN
RX_0N
RX_1N
RX_2N
CVDD1
NC
NC
OSD_IN[21]/EXT_DIN[5]
B2
OSD_IN[22]/EXT_DIN[6]
B3
B4
B5
B6
B7
B8
B9
B10
B11
OSD_VS
AUD_IN[0]
AUD_IN[3]
SFL
ARC1_OUT
MISO1
MOSI2
MISO2
ALSB
N/A
N/A
Power
Rx input
Rx input
Rx input
Rx input
Power
N/A
N/A
OSD video input/
miscellaneous digital
OSD video input/
miscellaneous digital
OSD video sync
Audio input
Audio input
SFL
Audio output
Serial port control
Serial port control
Serial port control
I2C control
B12
B13
B14
B15
B16
B17
B18
B19
B20
B21
B22
B23
XTALP
PVDD1
NC
NC
GND
RX_CP
RX_0P
RX_1P
RX_2P
GND
NC
NC
Miscellaneous digital1
Power
N/A
N/A
GND
Rx input
Rx input
Rx input
Rx input
GND
N/A
N/A
Description
External OSD Video Pixel Input Port (OSD_IN[23])/Additional TTL Input for External
CCIR 656 Video Data (EXT_DIN[7]).
Data Enable for the OSD Input Port.
Pixel Clock for the OSD Input Port (OSD_CLK)/Pixel Clock for External Video Data
(EXT_CLK).
I2S0/DSD1 Audio Input.
I2S1/DSD2 Audio Input.
LRCLK/DSD5 Audio Input.
Test Pin. Connect this pin to ground through a 4.7 kΩ resistor.
Master Out Slave In (Serial Port 1). Serial Port 1 is used for OSD control.
Serial Clock (Serial Port 2). Serial Port 2 is used for the external flash ROM.
Chip Select (Serial Port 2). Serial Port 2 is used for the external flash ROM.
Reset Pin.
Crystal Input.
PLL Digital Supply Voltage (1.8 V).
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Comparator Supply Voltage (1.8 V).
Rx Clock Complement Input.
Rx Channel 0 Complement Input.
Rx Channel 1 Complement Input.
Rx Channel 2 Complement Input.
Comparator Supply Voltage (1.8 V).
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
External OSD Video Pixel Input Port (OSD_IN[21])/Additional TTL Input for External CCIR
656 Video Data (EXT_DIN[5]).
External OSD Video Pixel Input Port (OSD_IN[22])/Additional TTL Input for External CCIR
656 Video Data (EXT_DIN[6]).
Vertical Sync for the OSD Input Port.
S/PDIF or DSD0 Audio Input.
I2S2/DSD3 Audio Input.
Subcarrier Frequency Lock Signal (SFL).
Audio Return Channel for HDMI Tx1.
Master In Slave Out (Serial Port 1). Serial Port 1 is used for OSD control.
Master Out Slave In (Serial Port 2). Serial Port 2 is used for the external flash ROM.
Master In Slave Out (Serial Port 2). Serial Port 2 is used for the external flash ROM.
Sets LSB of I2C address. When the ALSB pin is set low, the I2C address is 0x18; when the
ALSB pin is set high, the I2C address is 0x1A.
Crystal Input.
PLL Analog Supply Voltage (1.8 V).
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Ground.
Rx Clock True Input.
Rx Channel 0 True Input.
Rx Channel 1 True Input.
Rx Channel 2 True Input.
Ground.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Rev. B | Page 30 of 64
Data Sheet
ADV8003
Pin
No.
C1
Mnemonic
OSD_IN[19]/EXT_DIN[3]
C2
OSD_IN[20]/EXT_DIN[4]
C3
C4
C5
C6
C7
GND
AUD_IN[4]
DSD_CLK
SCLK
SCL
C8
C9
C10
C11
C12
C13
C14
C15
C16
C17
C18
C19
C20
C21
C22
C23
D1
SCK1
GND
INT0
PDN
GND
GND
NC
NC
RX_HPD
AVDD1
GND
GND
AVDD1
AVDD1
NC
NC
OSD_IN[16]/EXT_DIN[0]
D2
OSD_IN[17]/EXT_DIN[1]
D3
OSD_IN[18]/EXT_DIN[2]
D4
D5
D6
D7
GND
DVDD_IO
MCLK
SDA
Serial port control
GND
Miscellaneous digital
Miscellaneous digital
GND
GND
N/A
N/A
Rx input
Power
GND
GND
Power
Power
N/A
N/A
OSD video input/
miscellaneous digital
OSD video input/
miscellaneous digital
OSD video input/
miscellaneous digital
GND
Power
Audio input
I2C control
D8
D9
D10
CS1
GND
INT1
Serial port control
GND
Miscellaneous digital
D11
INT2
Miscellaneous digital
D12
D13
D14
D15
D16
D17
D18
D19
DVDD_IO
TEST1
NC
NC
RX_5V
NC
NC
RTERM
Power
Miscellaneous digital
N/A
N/A
Rx input
N/A
N/A
HDMI Rx input
D20
D21
D22
D23
AVDD2
AVDD2
NC
NC
Power
Power
N/A
N/A
Type
OSD video input/
miscellaneous digital
OSD video input/
miscellaneous digital
GND
Audio input
Audio input
Audio input
I2C control
Description
External OSD Video Pixel Input Port (OSD_IN[19])/Additional TTL Input for External
CCIR 656 Video Data (EXT_DIN[3]).
External OSD Video Pixel Input Port (OSD_IN[20])/Additional TTL Input for External
CCIR 656 Video Data (EXT_DIN[4]).
Ground.
I2S3/DSD4 Audio Input.
DSD Audio Clock Input.
I2S Bit Clock Input.
I2C Clock Input. This pin is open drain; use a 4.7 kΩ resistor to connect this pin to a 3.3 V
supply.
Serial Clock (Serial Port 1). Serial Port 1 is used for OSD control.
Ground.
Interrupt Pin 0. When status bits change, this pin is triggered.
Power-Down. This pin controls the power state of the ADV8003.
Ground.
Ground.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Hot Plug Assert Signal Output for the Rx Input.
HDMI Rx Inputs Analog Supply (3.3 V).
Ground.
Ground.
HDMI Rx Inputs, Analog Supply (3.3 V).
HDMI Rx Inputs, Analog Supply (3.3 V).
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
External OSD Video Pixel Input Port (OSD_IN[16])/Additional TTL Input for External
CCIR 656 Video Data (EXT_DIN[0]).
External OSD Video Pixel Input Port (OSD_IN[17])/Additional TTL Input for External
CCIR 656 Video Data (EXT_DIN[1]).
External OSD Video Pixel Input Port (OSD_IN[18])/Additional TTL Input for External
CCIR 656 Video Data (EXT_DIN[2]).
Ground.
Digital Interface Supply (3.3 V).
MCLK for S/PDIF Input Audio.
I2C Data Input. This pin is open drain; use a 4.7 kΩ resistor to connect this pin to a 3.3 V
supply.
Chip Select (Serial Port 1). Serial Port 1 is used for OSD control.
Ground.
Interrupt Pin for HDMI Transmitter Outputs. When status bits change, an interrupt is
generated on this pin.
Interrupt Pin for HDMI Receiver Input Lines. When status bits change, an interrupt is
generated on this pin.
Digital Interface Supply (3.3 V).
Test Pin. Float this pin.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
5 V Detect Pin for the Rx Input.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
This pin sets internal termination resistance. Use a 500 Ω resistor between this pin and
GND. Place the RTERM resistor as close as possible to the ADV8003.
Analog Power Supply (3.3 V).
Analog Power Supply (3.3 V).
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Rev. B | Page 31 of 64
ADV8003
Pin
No.
E1
Mnemonic
OSD_IN[13]/VBI_SCK
E2
OSD_IN[14]/VBI_MOSI
E3
OSD_IN[15]/VBI_CS
E4
E20
E21
E22
E23
F1
F2
F3
F4
DVDD_IO
TEST2
GND
NC
NC
OSD_IN[9]
OSD_IN[10]
OSD_IN[11]
OSD_IN[12]
F20
F21
F22
F23
G1
G2
G3
G4
G7
G8
G9
G10
G11
G12
G13
G14
G15
G16
G17
G20
G21
G22
G23
H1
H2
H3
H4
H7
H8
H9
H10
H11
H12
H13
H14
H15
H16
H17
H20
H21
NC
PVDD3
GND
CEC1
OSD_IN[5]
OSD_IN[6]
OSD_IN[7]
OSD_IN[8]
GND
GND
GND
DVDD
GND
GND
DVDD
GND
GND
GND
GND
ELPF1
ELPF2
GND
AVDD3
OSD_IN[1]
OSD_IN[2]
OSD_IN[3]
OSD_IN[4]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
Data Sheet
Type
OSD video input/
miscellaneous digital
OSD video input/
miscellaneous digital
OSD video input/
miscellaneous digital
Power
Miscellaneous analog
GND
N/A
N/A
OSD video input
OSD video input
OSD video input
OSD video input/
miscellaneous digital
N/A
Power
GND
HDMI Tx1
OSD video input
OSD video input
OSD video input
OSD video input
GND
GND
GND
Power
GND
GND
Power
GND
GND
GND
GND
Miscellaneous analog1
Miscellaneous analog1
GND
Power
OSD video input
OSD video input
OSD video input
OSD video input
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
Description
External OSD Video Pixel Input Port (OSD_IN[13])/Serial Clock for VBI Data Serial Port
(VBI_SCK).
External OSD Video Pixel Input Port (OSD_IN[14])/Master Out Slave In for VBI Data Serial
Port (VBI_MOSI).
External OSD Video Pixel Input Port (OSD_IN[15])/Chip Select for VBI Data Serial Port
(VBI_CS).
Digital Interface Supply (3.3 V).
Test Pin. Float this pin.
Ground.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
External OSD Video Pixel Input Port (OSD_IN[9]).
External OSD Video Pixel Input Port (OSD_IN[10]).
External OSD Video Pixel Input Port (OSD_IN[11]).
External OSD Video Pixel Input Port (OSD_IN[12]).
No Connect. Do not connect to this pin.
PLL Supply (1.8 V).
Ground.
HDMI Tx1 Consumer Electronics Control (CEC).
External OSD Video Pixel Input Port (OSD_IN[5]).
External OSD Video Pixel Input Port (OSD_IN[6]).
External OSD Video Pixel Input Port (OSD_IN[7]).
External OSD Video Pixel Input Port (OSD_IN[8]).
Ground.
Ground.
Ground.
Digital Power Supply (1.8 V).
Ground.
Ground.
Digital Power Supply (1.8 V).
Ground.
Ground.
Ground.
Ground.
External Loop Filter for PLL 1. Connect to PVDD3.
External Loop Filter for PLL 2. Connect to PVDD3.
Ground.
HDMI Analog Power Supply (1.8 V).
External OSD Video Pixel Input Port (OSD_IN[1]).
External OSD Video Pixel Input Port (OSD_IN[2]).
External OSD Video Pixel Input Port (OSD_IN[3]).
External OSD Video Pixel Input Port (OSD_IN[4]).
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Rev. B | Page 32 of 64
Data Sheet
ADV8003
Pin
No.
H22
H23
J1
J2
J3
J4
J7
J8
J9
J10
J11
J12
J13
J14
J15
J16
J17
J20
Mnemonic
TX1_2+
TX1_2−
DE
HS
OSD_HS
OSD_IN[0]
DVDD
GND
GND
GND
GND
GND
GND
GND
GND
GND
DVDD
DDC1_SDA
Type
HDMI Tx1
HDMI Tx1
Digital video sync
Digital video sync
Digital video sync
OSD video input
Power
GND
GND
GND
GND
GND
GND
GND
GND
GND
Power
HDMI Tx1
J21
J22
J23
K1
K2
K3
K4
K7
K8
K9
K10
K11
K12
K13
K14
K15
K16
K17
K20
GND
TX1_1+
TX1_1−
VS
PCLK
DVDD_IO
DVDD_IO
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
DDC1_SCL
GND
HDMI Tx1
HDMI Tx1
Digital video sync
Digital video sync
Power
Power
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
HDMI Tx1
K21
K22
K23
L1
L2
L3
L4
L7
L8
L9
L10
L11
L12
L13
L14
L15
GND
TX1_0+
TX1_0−
P[32]
P[33]
P[34]
P[35]
DVDD
GND
GND
GND
GND
GND
GND
GND
GND
GND
HDMI Tx1
HDMI Tx1
Digital video input
Digital video input
Digital video input
Digital video input
Power
GND
GND
GND
GND
GND
GND
GND
GND
Description
HDMI1 Channel 2 True Output.
HDMI1 Channel 2 Complementary Output.
Data Enable for Digital Input Video.
Horizontal Sync for Digital Input Video.
Horizontal Sync for the OSD Input Port (OSD_HS).
External OSD Video Pixel Input Port (OSD_IN[0]).
Digital Power Supply (1.8 V).
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Digital Power Supply (1.8 V).
HDCP Slave Serial Data for HDMI Tx1. This pin is open drain; use a 2 kΩ resistor to
connect this pin to the HDMI Tx 5 V supply.
Ground.
HDMI1 Channel 1 True Output.
HDMI1 Channel 1 Complementary Output.
Vertical Sync for Digital Input Video.
Pixel Clock for Digital Input Video.
Digital Interface Supply (3.3 V).
Digital Interface Supply (3.3 V).
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
HDCP Slave Serial Clock for HDMI Tx1. This pin is open drain; use a 2 kΩ resistor to
connect this pin to the HDMI Tx 5 V supply.
Ground.
HDMI1 Channel 0 True Output.
HDMI1 Channel 0 Complementary Output.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Power Supply (1.8 V).
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Rev. B | Page 33 of 64
ADV8003
Data Sheet
Pin
No.
L16
L17
L20
L21
L22
L23
M1
M2
M3
M4
M7
M8
M9
M10
M11
M12
M13
M14
M15
M16
M17
M20
Mnemonic
GND
GND
HPD_TX1
GND
TX1_C+
TX1_C−
P[28]
P[29]
P[30]
P[31]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
R_TX1
Type
GND
GND
HDMI Tx1
GND
HDMI Tx1
HDMI Tx1
Digital video input
Digital video input
Digital video input
Digital video input
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
HDMI Tx11
M21
M22
M23
N1
N2
N3
N4
N7
N8
N9
N10
N11
N12
N13
N14
N15
N16
N17
N20
N21
N22
N23
P1
P2
P3
P4
P7
P8
P9
P10
P11
P12
PVDD5
HEAC_1+
HEAC_1−
P[24]
P[25]
P[26]
P[27]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
PVDD5
AVDD3
NC
P[20]
P[21]
P[22]
P[23]
DVDD
GND
GND
GND
GND
GND
Power1
HDMI Tx1
HDMI Tx1
Digital video input
Digital video input
Digital video input
Digital video input
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
N/A
Power1
Power
N/A
Digital video input
Digital video input
Digital video input
Digital video input
Power
GND
GND
GND
GND
GND
Description
Ground.
Ground.
Hot Plug Assert Signal Input for HDMI Tx1.
Ground.
HDMI1 Clock True Output.
HDMI1 Clock Complementary Output.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Sets internal reference currents. Place a 470 Ω resistor (1% tolerance) between this pin and
ground, as close as possible to the ADV8003.
HDMI Tx PLL Power Supply (1.8 V).
HDMI Tx1 HEAC+ from HDMI Connector.
HDMI Tx1 HEAC− from HDMI Connector.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
No Connect. Do not connect to this pin.
HDMI Tx PLL Power Supply (1.8 V).
HDMI Analog Power Supply (1.8 V).
No Connect. Do not connect to this pin.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Power Supply (1.8 V).
Ground.
Ground.
Ground.
Ground.
Ground.
Rev. B | Page 34 of 64
Data Sheet
Pin
No.
P13
P14
P15
P16
P17
P20
P21
P22
P23
R1
R2
R3
R4
R7
R8
R9
R10
R11
R12
R13
R14
R15
R16
R17
R20
R21
R22
R23
T1
T2
T3
T4
T7
T8
T9
T10
T11
T12
T13
T14
T15
T16
T17
T20
T21
T22
T23
U1
U2
U3
U4
U7
U8
U9
U10
Mnemonic
GND
GND
GND
GND
DVDD
NC
GND
NC
NC
P[16]
P[17]
P[18]
P[19]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
GND
NC
NC
P[14]
P[15]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
GND
NC
NC
P[10]
P[11]
P[12]
P[13]
GND
GND
DVDD
GND
ADV8003
Type
GND
GND
GND
GND
Power
N/A
GND
N/A
N/A
Digital video input
Digital video input
Digital video input
Digital video input
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
N/A
GND
N/A
N/A
Digital video input
Digital video input
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
N/A
GND
N/A
N/A
Digital video input
Digital video input
Digital video input
Digital video input
GND
GND
Power
GND
Description
Ground.
Ground.
Ground.
Ground.
Digital Power Supply (1.8 V).
No Connect. Do not connect to this pin.
Ground.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
No Connect. Do not connect to this pin.
Ground.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
No Connect. Do not connect to this pin.
Ground.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Ground.
Ground.
Digital Power Supply (1.8 V).
Ground.
Rev. B | Page 35 of 64
ADV8003
Pin
No.
U11
U12
U13
U14
U15
U16
U17
U20
U21
U22
U23
V1
V2
V3
V4
V20
V21
V22
V23
W1
W2
W3
W4
W20
W21
W22
W23
Y1
Y2
Y3
Y4
Y5
Y6
Y7
Y8
Y9
Y10
Y11
Y12
Y13
Y14
Y15
Y16
Y17
Y18
Y19
Y20
Y21
Y22
Y23
AA1
AA2
AA3
AA4
AA5
Mnemonic
GND
DVDD
GND
GND
DVDD
GND
GND
NC
GND
NC
NC
P[6]
P[7]
P[8]
P[9]
GND
PVDD6
NC
NC
P[2]
P[3]
P[4]
P[5]
TEST3
PVDD6
AVDD3
NC
P[0]
P[1]
DDR_DQS[2]
GND
DDR_DQ[23]
DVDD_DDR
DDR_DQS[3]
GND
DDR_A[11]
DVDD_DDR
DDR_A[4]
GND
DDR_CAS
DVDD_DDR
DDR_CK
GND
DDR_DQ[9]
DVDD_DDR
DDR_DQ[14]
GND
DDR_DQ[6]
PVDD_DDR
GND
DDR_DQ[18]
GND
GND
DDR_DQS[2]
DDR_DQ[26]
Data Sheet
Type
GND
Power
GND
GND
Power
GND
GND
N/A
GND
N/A
N/A
Digital video input
Digital video input
Digital video input
Digital video input
GND
Power1
N/A
N/A
Digital video input
Digital video input
Digital video input
Digital video input
Miscellaneous digital
Power1
Power
N/A
Digital video input
Digital video input
DDR interface
GND
DDR interface
Power
DDR interface
GND
DDR interface
Power
DDR interface
GND
DDR interface
Power
DDR interface
GND
DDR Interface
Power
DDR interface
GND
DDR interface
Power
GND
DDR interface
GND
GND
DDR interface
DDR interface
Description
Ground.
Digital Power Supply (1.8 V).
Ground.
Ground.
Digital Power Supply (1.8 V).
Ground.
Ground.
No Connect. Do not connect to this pin.
Ground.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Ground.
HDMI Tx PLL Power Supply (1.8 V).
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Test Pin. Connect this pin to ground through a 0.1 µF capacitor.
HDMI Tx PLL Power Supply (1.8 V).
HDMI Analog Power Supply (1.8 V).
No Connect. Do not connect to this pin.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Data Strobe for DDR Data Bytes[23:16].
Ground.
Data Line. Interface to external RAM data lines.
DDR Interface Supply (1.8 V).
Data Strobe for DDR Data Bytes[31:24].
Ground.
Address Line. Interface to external RAM address lines.
DDR Interface Supply (1.8 V).
Address Line. Interface to external RAM address lines.
Ground.
Column Address Strobe for DDR Memory.
DDR Interface Supply (1.8 V).
DDR Memory Clock. Interface to external DDR RAM clock lines.
Ground.
Data Line. Interface to external RAM data lines.
DDR Interface Supply (1.8 V).
Data Line. Interface to external RAM data lines.
Ground.
Data Line. Interface to external RAM data lines.
DDR Interface PLL Supply (1.8 V).
Ground.
Data Line. Interface to external RAM data lines.
Ground.
Ground.
Data Strobe for DDR Data Bytes[23:16].
Data Line. Interface to external RAM data lines.
Rev. B | Page 36 of 64
Data Sheet
ADV8003
Pin
No.
AA6
AA7
AA8
Mnemonic
DVDD_DDR
DDR_DQS[3]
NC/GND
Type
Power
DDR interface
No connect/GND
AA9
AA10
AA11
AA12
AA13
AA14
AA15
AA16
AA17
AA18
AA19
AA20
AA21
AA22
AA23
AB1
AB2
AB3
AB4
AB5
AB6
AB7
AB8
AB9
AB10
AB11
AB12
AB13
AB14
AB15
AB16
AB17
AB18
AB19
AB20
AB21
AB22
AB23
AC1
AC2
AC3
AC4
AC5
AC6
AC7
AC8
AC9
AC10
AC11
AC12
AC13
DDR_A[8]
DVDD_DDR
DDR_A[2]
GND
DDR_CS
DVDD_DDR
DDR_CK
GND
DDR_DQ[11]
DVDD_DDR
DDR_DM[1]
DDR_DM[0]
GND
GND
DDR_DQ[3]
DDR_DQ[21]
DDR_DQ[19]
DDR_DQ[17]
DDR_DM[2]
DDR_DQ[30]
DDR_DM[3]
DDR_DQ[31]
DDR_DQ[29]
DDR_A[12]
DDR_A[6]
DDR_A[3]
DDR_A[0]
DDR_BA[0]
DDR_RAS
DDR_CKE
DDR_DQ[12]
DDR_DQS[1]
DDR_DQ[8]
DDR_DQ[13]
DDR_DQ[0]
DDR_DQ[5]
DDR_DQS[0]
DDR_DQ[4]
DDR_DQ[16]
DDR_DQ[20]
DDR_DQ[22]
DDR_DQ[25]
DDR_DQ[28]
DDR_DQ[27]
DDR_DQ[24]
DDR_A[9]
DDR_A[5]
DDR_A[7]
DDR_A[1]
DDR_A[10]
DDR_BA[1]
DDR interface
Power
DDR interface
GND
DDR interface
Power
DDR interface
GND
DDR interface
Power
DDR interface
DDR interface
GND
GND
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
Description
DDR Interface Supply (1.8 V).
Data Strobe for DDR Data Bytes[31:24].
For new ADV8003 designs, do not connect to this pin. For designs that must maintain
consistency with the ADV8002, this pin can be grounded.
Address Line. Interface to external RAM address lines.
DDR Interface Supply (1.8 V).
Address Line. Interface to external RAM address lines.
Ground.
DDR Chip Select. Interface to external DDR RAM chip selects.
DDR Interface Supply (1.8 V).
DDR Memory Clock. Interface to external DDR RAM clock lines.
Ground.
Data Line. Interface to external RAM data lines.
DDR Interface Supply (1.8 V).
Data Mask for Data Lines[15:8].
Data Mask for Data Lines[7:0].
Ground.
Ground.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Mask for Data Lines[23:16].
Data Line. Interface to external RAM data lines.
Data Mask for Data Lines[31:25].
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Bank Address Line. Indicates which data bank to write/read from.
Row Address Strobe for DDR Memory.
Clock Enable for External DDR Memory.
Data Line. Interface to external RAM data lines.
Data Strobe for DDR Data Bytes[15:8].
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Strobe for DDR Data Bytes[7:0].
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Bank Address Line. Indicates which data bank to write/read from.
Rev. B | Page 37 of 64
ADV8003
Pin
No.
AC14
AC15
AC16
AC17
AC18
AC19
AC20
AC21
AC22
AC23
1
Mnemonic
DDR_BA[2]
DDR_WE
DDR_VREF
DDR_DQ[10]
DDR_DQS[1]
DDR_DQ[15]
DDR_DQ[7]
DDR_DQ[2]
DDR_DQS[0]
DDR_DQ[1]
Data Sheet
Type
DDR interface
DDR interface
DDR interface1
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
Description
Bank Address Line. Indicates which data bank to write/read from.
Write Enable Signal for DDR RAM.
Reference Voltage for DDR RAM.
Data Line. Interface to external RAM data lines.
Data Strobe for DDR Data Bytes[15:8].
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Strobe for DDR Data Bytes[7:0].
Data Line. Interface to external RAM data lines.
Sensitive node. Careful layout is important. Keep the associated circuitry as close as possible to the ADV8003.
Rev. B | Page 38 of 64
1
ADV8003
2
3
4
5
6
9
10
A
OSD_
IN[23]/
EXT_
DIN[7]
OSD_
DE
OSD_
CLK/
EXT_
CLK
AUD_
IN[1]
AUD_
IN[2]
AUD_
IN[5]
ARC2_
OUT MOSI1
SCK2
CS2
B
OSD_
IN[21]/
EXT_
DIN[5]
OSD_
IN[22]/
EXT_
DIN[6]
OSD_
VS
AUD_
IN[0]
AUD_
IN[3]
SFL
ARC1_
MISO1
OUT
MOSI2 MISO2
C
OSD_
IN[19]/
EXT_
DIN[3]
OSD_
IN[20]/
EXT_
DIN[4]
GND
AUD_
IN[4]
DSD_
CLK
SCLK
SCL
SCK1
GND
INT0
PDN
GND
D
OSD_
IN[16]/
EXT_
DIN[0]
OSD_
IN[17]/
EXT_
DIN[1]
OSD_
IN[18]/
EXT_
DIN[2]
GND
DVDD_
IO
MCLK
SDA
CS1
GND
INT1
INT2
DVDD_
IO
E
OSD_
OSD_
OSD_
IN[13]/
IN[14]/
IN[15]/
VBI_SCK VBI_MOSI VBI_CS
7
8
11
12
13
14
15
22
23
NC
NC
RX_2N CVDD1
NC
NC
A
NC
NC
GND
RX_CP RX_0P RX_1P
RX_2P
NC
NC
B
GND
NC
NC
RX_
HPD
AVDD1
GND
AVDD1 AVDD1
NC
NC
C
TEST1
NC
NC
RX_5V
NC
NC
RTERM AVDD2 AVDD2
NC
NC
D
DVDD_
IO
TEST2
GND
NC
NC
E
NC
PVDD3
GND
CEC1
F
GND
AVDD3
G
RESET XTALN PVDD2
ALSB
XTALP PVDD1
16
17
18
19
CVDD1 RX_CN RX_0N RX_1N
GND
20
21
GND
F
OSD_
IN[9]
OSD_
IN[10]
OSD_
IN[11]
OSD_
IN[12]
G
OSD_
IN[5]
OSD_
IN[6]
OSD_
IN[7]
OSD_
IN[8]
GND
GND
GND
DVDD
GND
GND
DVDD
GND
GND
GND
GND
ELPF1
ELPF2
H
OSD_
IN[1]
OSD_
IN[2]
OSD_
IN[3]
OSD_
IN[4]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
TX1_2+ TX1_2–
H
J
DE
HS
OSD_
HS
OSD_
IN[0]
DVDD
GND
GND
GND
GND
GND
GND
GND
GND
GND
DVDD
DDC1_
SDA
GND
TX1_1+ TX1_1–
J
GND
DDC1_
SCL
GND
TX1_0+ TX1_0–
K
GND
HPD_
TX1
GND
TX1_C+ TX1_C–
L
R_TX1
HEAC_ HEAC_
PVDD5
1+
1–
M
PVDD5 AVDD3
N
K
L
VS
P[32]
PCLK
P[33]
DVDD_ DVDD_
IO
IO
P[34]
GND
DVDD
P[35]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
M
P[28]
P[29]
P[30]
P[31]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
N
P[24]
P[25]
P[26]
P[27]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
CEC2
GND
TX2_2+ TX2_2–
P
NC
P
P[20]
P[21]
P[22]
P[23]
DVDD
GND
GND
GND
GND
GND
GND
GND
GND
GND
DVDD
DDC2_
SCL
R
P[16]
P[17]
P[18]
P[19]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
DDC2_
SDA
GND
TX2_1+ TX2_1–
R
T
P[14]
P[15]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
HPD_
TX2
GND
TX2_0+ TX2_0–
T
U
P[10]
P[11]
P[12]
P[13]
GND
GND
DVDD
GND
GND
DVDD
GND
GND
DVDD
GND
GND
R_TX2
GND
TX2_C+ TX2_C–
U
HEAC_ HEAC_
PVDD6
2+
2–
V
V
P[6]
P[7]
P[8]
P[9]
GND
W
P[2]
P[3]
P[4]
P[5]
TEST3
Y
P[0]
P[1]
DDR_
DQS[2]
AA
DDR_
DQ[18]
GND
GND
AB
DDR_
DDR_
DDR_
DQ[21] DQ[19] DQ[17]
AC
DDR_
DDR_
DDR_
DDR_ DDR_
DDR_
DDR_ DDR_
DQ[16] DQ[20] DQ[22] DQ[25] DQ[28] DQ[27] DQ[24] A[9]
1
2
3
DDR_ DVDD_ DDR_
DQ[23] DDR
DQS[3]
DDR_ DDR_ DVDD_ DDR_
DQS[2] DQ[26] DDR DQS[3]
GND
DDR_
DM[2]
4
DDR_
DQ[30]
5
DDR_
DM[3]
6
DVDD_
DDR
DDR_
CK
GND
DDR_
DQ[9]
DDR_
A[2]
GND
DDR_
CS
DVDD_
DDR
DDR_
CK
GND
DDR_ DVDD_
DQ[11]
DDR
DDR_
A[6]
DDR_
A[3]
DDR_
A[0]
DDR_
BA[0]
DDR_
RAS
DDR_
CKE
DDR_
DDR_
DQ[12] DQS[1]
DDR_
A[5]
DDR_
A[7]
DDR_
A[1]
DDR_
A[10]
DDR_
BA[1]
DDR_
BA[2]
DDR_
WE
DDR_
VREF
9
10
12
13
14
15
16
GND
DVDD_
DDR
DDR_
A[4]
NC/
GND
DDR_
A[8]
DVDD_
DDR
DDR_
A[12]
DDR_ DDR_
DQ[31] DQ[29]
7
GND
DDR_
CAS
DDR_
A[11]
8
11
Rev. B | Page 39 of 64
NC
W
GND
DDR_
DQ[6]
PVDD_
DDR
GND
Y
DDR_
DM[1]
DDR_
DM[0]
GND
GND
DDR_
DQ[3]
AA
DDR_
DQ[13]
DDR_
DQ[0]
DDR_
DQ[5]
DDR_
DQS[0]
DDR_
DQ[4]
AB
DDR_
DDR_
DDR_
DQ[10] DQS[1] DQ[15]
DDR_
DQ[7]
DDR_
DQ[2]
DDR_
DQS[0]
DDR_
DQ[1]
AC
20
21
22
23
17
Figure 31. ADV8003KBCZ-8C and ADV8003KBCZ-7C Pin Configuration
DVDD_ DDR_
DQ[14]
DDR
PVDD6 AVDD3
DDR_
DQ[8]
18
19
10556-131
Data Sheet
ADV8003
Data Sheet
Table 8. ADV8003KBCZ-8C and ADV8003KBCZ-7C Pin Function Descriptions
Pin No.
A1
Mnemonic
OSD_IN[23]/EXT_DIN[7]
A2
A3
OSD_DE
OSD_CLK/EXT_CLK
Type
OSD video input/
miscellaneous digital
OSD video sync
OSD video sync
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
AUD_IN[1]
AUD_IN[2]
AUD_IN[5]
ARC2_OUT
MOSI1
SCK2
CS2
RESET
XTALN
PVDD2
Audio input
Audio input
Audio input
Audio output
Serial port control
Serial port control
Serial port control
Miscellaneous digital
Miscellaneous digital 1
Power
A14
A15
A16
A17
A18
A19
A20
A21
A22
A23
B1
NC
NC
CVDD1
RX_CN
RX_0N
RX_1N
RX_2N
CVDD1
NC
NC
OSD_IN[21]/EXT_DIN[5]
B2
OSD_IN[22]/EXT_DIN[6]
B3
B4
B5
B6
B7
B8
B9
B10
B11
OSD_VS
AUD_IN[0]
AUD_IN[3]
SFL
ARC1_OUT
MISO1
MOSI2
MISO2
ALSB
N/A
N/A
Power
Rx input
Rx input
Rx input
Rx input
Power
N/A
N/A
OSD video input/
miscellaneous digital
OSD video input/
miscellaneous digital
OSD video sync
Audio input
Audio input
SFL
Audio output
Serial port control
Serial port control
Serial port control
I2C control
B12
B13
B14
B15
B16
B17
B18
B19
B20
B21
B22
B23
XTALP
PVDD1
NC
NC
GND
RX_CP
RX_0P
RX_1P
RX_2P
GND
NC
NC
Miscellaneous digital1
Power
N/A
N/A
GND
Rx input
Rx input
Rx input
Rx input
GND
N/A
N/A
Description
External OSD Video Pixel Input Port (OSD_IN[23])/Additional TTL Input for External
CCIR 656 Video Data (EXT_DIN[7]).
Data Enable for the OSD Input Port.
Pixel Clock for the OSD Input Port (OSD_CLK)/Pixel Clock for External Video Data
(EXT_CLK).
I2S0/DSD1 Audio Input.
I2S1/DSD2 Audio Input.
LRCLK/DSD5 Audio Input.
Audio Return Channel for HDMI Tx2.
Master Out Slave In (Serial Port 1). Serial Port 1 is used for OSD control.
Serial Clock (Serial Port 2). Serial Port 2 is used for the external flash ROM.
Chip Select (Serial Port 2). Serial Port 2 is used for the external flash ROM.
Reset Pin.
Crystal Input.
PLL Digital Supply Voltage (1.8 V).
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Comparator Supply Voltage (1.8 V).
Rx Clock Complement Input.
Rx Channel 0 Complement Input.
Rx Channel 1 Complement Input.
Rx Channel 2 Complement Input.
Comparator Supply Voltage (1.8 V).
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
External OSD Video Pixel Input Port (OSD_IN[21])/Additional TTL Input for External
CCIR 656 Video Data (EXT_DIN[5]).
External OSD Video Pixel Input Port (OSD_IN[22])/Additional TTL Input for External
CCIR 656 Video Data (EXT_DIN[6]).
Vertical Sync for the OSD Input Port.
S/PDIF/DSD0 Audio Input.
I2S2/DSD3 Audio Input.
Subcarrier Frequency Lock Signal (SFL).
Audio Return Channel for HDMI Tx1.
Master In Slave Out (Serial Port 1). Serial Port 1 is used for OSD control.
Master Out Slave In (Serial Port 2). Serial Port 2 is used for the external flash ROM.
Master In Slave Out (Serial Port 2). Serial Port 2 is used for the external flash ROM.
Sets LSB of I2C address. When the ALSB pin is set low, the I2C address is 0x18; when
the ALSB pin is set high, the I2C address is 0x1A.
Crystal Input.
PLL Analog Supply Voltage (1.8 V).
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Ground.
Rx Clock True Input.
Rx Channel 0 True Input.
Rx Channel 1 True Input.
Rx Channel 2 True Input.
Ground.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Rev. B | Page 40 of 64
Data Sheet
ADV8003
Pin No.
C1
Mnemonic
OSD_IN[19]/EXT_DIN[3]
C2
OSD_IN[20]/EXT_DIN[4]
C3
C4
C5
C6
C7
C8
C9
C10
C11
C12
C13
C14
C15
C16
C17
C18
C19
C20
C21
C22
C23
D1
GND
AUD_IN[4]
DSD_CLK
SCLK
SCL
SCK1
GND
INT0
PDN
GND
GND
NC
NC
RX_HPD
AVDD1
GND
GND
AVDD1
AVDD1
NC
NC
OSD_IN[16]/EXT_DIN[0]
D2
OSD_IN[17]/EXT_DIN[1]
D3
OSD_IN[18]/EXT_DIN[2]
D4
D5
D6
D7
D8
D9
D10
GND
DVDD_IO
MCLK
SDA
CS1
GND
INT1
Type
OSD video input/
miscellaneous digital
OSD video input/
miscellaneous digital
GND
Audio input
Audio input
Audio input
I2C control
Serial port control
GND
Miscellaneous digital
Miscellaneous digital
GND
GND
N/A
N/A
Rx input
Power
GND
GND
Power
Power
N/A
N/A
OSD video input/
miscellaneous digital
OSD video input/
miscellaneous digital
OSD video input/
miscellaneous digital
GND
Power
Audio input
I2C control
Serial port control
GND
Miscellaneous digital
D11
INT2
Miscellaneous digital
D12
D13
D14
D15
D16
D17
D18
D19
DVDD_IO
TEST1
NC
NC
RX_5V
NC
NC
RTERM
Power
Miscellaneous digital
N/A
N/A
Rx input
N/A
N/A
HDMI Rx input
D20
D21
D22
D23
AVDD2
AVDD2
NC
NC
Power
Power
N/A
N/A
Description
External OSD Video Pixel Input Port (OSD_IN[19])/Additional TTL Input for External
CCIR 656 Video Data (EXT_DIN[3]).
External OSD Video Pixel Input Port (OSD_IN[20])/Additional TTL Input for External
CCIR 656 Video Data (EXT_DIN[4]).
Ground.
I2S3/DSD4 Audio Input.
DSD Audio Clock Input.
I2S Bit Clock Input.
I2C Clock Input. SCL is open drain; use a 4.7 kΩ resistor to connect this pin to a 3.3 V supply.
Serial Clock (Serial Port 1). Serial Port 1 is used for OSD control.
Ground.
Interrupt Pin 0. When status bits change, this pin is triggered.
Power-Down. This pin controls the power state of the ADV8003.
Ground.
Ground.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Hot Plug Assert Signal Output for the Rx Input.
HDMI Rx Inputs Analog Supply (3.3 V).
Ground.
Ground.
HDMI Rx Inputs Analog Supply (3.3 V).
HDMI Rx Inputs Analog Supply (3.3 V).
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
External OSD Video Pixel Input Port (OSD_IN[16])/Additional TTL Input for External
CCIR 656 Video Data (EXT_DIN[0]).
External OSD Video Pixel Input Port (OSD_IN[17])/Additional TTL Input for External
CCIR 656 Video Data (EXT_DIN[1]).
External OSD Video Pixel Input Port (OSD_IN[18])/Additional TTL Input for External
CCIR 656 Video Data (EXT_DIN[2]).
Ground.
Digital Interface Supply (3.3 V).
MCLK for S/PDIF Input Audio.
I2C Data Input. SDA is open drain; use a 4.7 kΩ resistor to connect this pin to a 3.3 V supply.
Chip Select (Serial Port 1). Serial Port 1 is used for OSD control.
Ground.
Interrupt Pin for HDMI Transmitter Outputs. When status bits change, an interrupt is
generated on this pin.
Interrupt Pin for HDMI Receiver Input Lines. When status bits change, an interrupt is
generated on this pin.
Digital Interface Supply (3.3 V).
Test Pin. Float this pin.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
5 V Detect Pin for the Rx Input.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
This pin sets internal termination resistance. Use a 500 Ω resistor between this pin
and GND. Place the RTERM resistor as close as possible to the ADV8003.
Analog Power Supply (3.3 V).
Analog Power Supply (3.3 V).
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Rev. B | Page 41 of 64
ADV8003
Pin No.
E1
Mnemonic
OSD_IN[13]/VBI_SCK
E2
OSD_IN[14]/VBI_MOSI
E3
OSD_IN[15]/VBI_CS
E4
E20
E21
E22
E23
F1
F2
F3
F4
DVDD_IO
TEST2
GND
NC
NC
OSD_IN[9]
OSD_IN[10]
OSD_IN[11]
OSD_IN[12]
F20
F21
F22
F23
G1
G2
G3
G4
G7
G8
G9
G10
G11
G12
G13
G14
G15
G16
G17
G20
G21
G22
G23
H1
H2
H3
H4
H7
H8
H9
H10
H11
H12
H13
H14
H15
H16
H17
H20
H21
H22
NC
PVDD3
GND
CEC1
OSD_IN[5]
OSD_IN[6]
OSD_IN[7]
OSD_IN[8]
GND
GND
GND
DVDD
GND
GND
DVDD
GND
GND
GND
GND
ELPF1
ELPF2
GND
AVDD3
OSD_IN[1]
OSD_IN[2]
OSD_IN[3]
OSD_IN[4]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
TX1_2+
Data Sheet
Type
OSD video input/
miscellaneous digital
OSD video input/
miscellaneous digital
OSD video input/
miscellaneous digital
Power
Miscellaneous analog
GND
N/A
N/A
OSD video input
OSD video input
OSD video input
OSD video input/
miscellaneous digital
N/A
Power
GND
HDMI Tx1
OSD video input
OSD video input
OSD video input
OSD video input
GND
GND
GND
Power
GND
GND
Power
GND
GND
GND
GND
Miscellaneous analog1
Miscellaneous analog1
GND
Power
OSD video input
OSD video input
OSD video input
OSD video input
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
HDMI Tx1
Description
External OSD Video Pixel Input Port (OSD_IN[13])/Serial Clock for VBI Data Serial Port
(VBI_SCK).
External OSD Video Pixel Input Port (OSD_IN[14])/Master Out Slave In for VBI Data
Serial Port (VBI_MOSI).
External OSD Video Pixel Input Port (OSD_IN[15])/Chip Select for VBI Data Serial Port
(VBI_CS).
Digital Interface Supply (3.3 V).
Test Pin. Float this pin.
Ground.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
External OSD Video Pixel Input Port (OSD_IN[9]).
External OSD Video Pixel Input Port (OSD_IN[10]).
External OSD Video Pixel Input Port (OSD_IN[11]).
External OSD Video Pixel Input Port (OSD_IN[12]).
No Connect. Do not connect to this pin.
PLL Supply (1.8 V).
Ground.
HDMI Tx1 Consumer Electronics Control (CEC).
External OSD Video Pixel Input Port (OSD_IN[5]).
External OSD Video Pixel Input Port (OSD_IN[6]).
External OSD Video Pixel Input Port (OSD_IN[7]).
External OSD Video Pixel Input Port (OSD_IN[8]).
Ground.
Ground.
Ground.
Digital Power Supply (1.8 V).
Ground.
Ground.
Digital Power Supply (1.8 V).
Ground.
Ground.
Ground.
Ground.
External Loop Filter for PLL 1. Connect to PVDD3.
External Loop Filter for PLL 2. Connect to PVDD3.
Ground.
HDMI Analog Power Supply (1.8 V).
External OSD Video Pixel Input Port (OSD_IN[1]).
External OSD Video Pixel Input Port (OSD_IN[2]).
External OSD Video Pixel Input Port (OSD_IN[3]).
External OSD Video Pixel Input Port (OSD_IN[4]).
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
HDMI1 Channel 2 True Output.
Rev. B | Page 42 of 64
Data Sheet
ADV8003
Pin No.
H23
J1
J2
J3
J4
J7
J8
J9
J10
J11
J12
J13
J14
J15
J16
J17
J20
Mnemonic
TX1_2−
DE
HS
OSD_HS
OSD_IN[0]
DVDD
GND
GND
GND
GND
GND
GND
GND
GND
GND
DVDD
DDC1_SDA
Type
HDMI Tx1
Digital video sync
Digital video sync
Digital video sync
OSD video input
Power
GND
GND
GND
GND
GND
GND
GND
GND
GND
Power
HDMI Tx1
J21
J22
J23
K1
K2
K3
K4
K7
K8
K9
K10
K11
K12
K13
K14
K15
K16
K17
K20
GND
TX1_1+
TX1_1−
VS
PCLK
DVDD_IO
DVDD_IO
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
DDC1_SCL
GND
HDMI Tx1
HDMI Tx1
Digital video sync
Digital video sync
Power
Power
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
HDMI Tx1
K21
K22
K23
L1
L2
L3
L4
L7
L8
L9
L10
L11
L12
L13
L14
L15
L16
L17
GND
TX1_0+
TX1_0−
P[32]
P[33]
P[34]
P[35]
DVDD
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
HDMI Tx1
HDMI Tx1
Digital video input
Digital video input
Digital video input
Digital video input
Power
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
Description
HDMI1 Channel 2 Complementary Output.
Data Enable for Digital Input Video.
Horizontal Sync for Digital Input Video.
Horizontal Sync for the OSD Input Port (OSD_HS).
External OSD Video Pixel Input Port (OSD_IN[0]).
Digital Power Supply (1.8 V).
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Digital Power Supply (1.8 V).
HDCP Slave Serial Data for HDMI Tx1. This pin is open drain; use a 2 kΩ resistor to
connect this pin to the HDMI Tx 5 V supply.
Ground.
HDMI1 Channel 1 True Output.
HDMI1 Channel 1 Complementary Output.
Vertical Sync for Digital Input Video.
Pixel Clock for Digital Input Video.
Digital Interface Supply (3.3 V).
Digital Interface Supply (3.3 V).
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
HDCP Slave Serial Clock for HDMI Tx1. This pin is open drain; use a 2 kΩ resistor to
connect this pin to the HDMI Tx 5 V supply.
Ground.
HDMI1 Channel 0 True Output.
HDMI1 Channel 0 Complementary Output.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Power Supply (1.8 V).
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Rev. B | Page 43 of 64
ADV8003
Data Sheet
Pin No.
L20
L21
L22
L23
M1
M2
M3
M4
M7
M8
M9
M10
M11
M12
M13
M14
M15
M16
M17
M20
Mnemonic
HPD_TX1
GND
TX1_C+
TX1_C−
P[28]
P[29]
P[30]
P[31]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
R_TX1
Type
HDMI Tx1
GND
HDMI Tx1
HDMI Tx1
Digital video input
Digital video input
Digital video input
Digital video input
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
HDMI Tx11
M21
M22
M23
N1
N2
N3
N4
N7
N8
N9
N10
N11
N12
N13
N14
N15
N16
N17
N20
N21
N22
N23
P1
P2
P3
P4
P7
P8
P9
P10
P11
P12
P13
P14
P15
PVDD5
HEAC_1+
HEAC_1−
P[24]
P[25]
P[26]
P[27]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
CEC2
PVDD5
AVDD3
NC
P[20]
P[21]
P[22]
P[23]
DVDD
GND
GND
GND
GND
GND
GND
GND
GND
Power1
HDMI Tx1
HDMI Tx1
Digital video input
Digital video input
Digital video input
Digital video input
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
HDMI Tx2
Power1
Power
N/A
Digital video input
Digital video input
Digital video input
Digital video input
Power
GND
GND
GND
GND
GND
GND
GND
GND
Description
Hot Plug Assert Signal Input for HDMI Tx1.
Ground.
HDMI1 Clock True Output.
HDMI1 Clock Complementary Output.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Sets Internal Reference Currents. Place a 470 Ω resistor (1% tolerance) between this pin
and ground. The external resistor should be placed as close as possible to the ADV8003.
HDMI Tx PLL Power Supply (1.8 V).
HDMI Tx1 HEAC+ from HDMI Connector.
HDMI Tx1 HEAC− from HDMI Connector.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
HDMI Tx2 Consumer Electronics Control (CEC).
HDMI Tx PLL Power Supply (1.8 V).
HDMI Analog Power Supply (1.8 V).
No Connect. Do not connect to this pin.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Power Supply (1.8 V).
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Rev. B | Page 44 of 64
Data Sheet
ADV8003
Pin No.
P16
P17
P20
Mnemonic
GND
DVDD
DDC2_SCL
Type
GND
Power
HDMI Tx2
P21
P22
P23
R1
R2
R3
R4
R7
R8
R9
R10
R11
R12
R13
R14
R15
R16
R17
R20
GND
TX2_2+
TX2_2−
P[16]
P[17]
P[18]
P[19]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
DDC2_SDA
GND
HDMI Tx2
HDMI Tx2
Digital video input
Digital video input
Digital video input
Digital video input
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
HDMI Tx2
R21
R22
R23
T1
T2
T3
T4
T7
T8
T9
T10
T11
T12
T13
T14
T15
T16
T17
T20
T21
T22
T23
U1
U2
U3
U4
U7
U8
U9
U10
U11
U12
GND
TX2_1+
TX2_1−
P[14]
P[15]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
HPD_TX2
GND
TX2_0+
TX2_0−
P[10]
P[11]
P[12]
P[13]
GND
GND
DVDD
GND
GND
DVDD
GND
HDMI Tx2
HDMI Tx2
Digital video input
Digital video input
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
HDMI Tx2
GND
HDMI Tx2
HDMI Tx2
Digital video input
Digital video input
Digital video input
Digital video input
GND
GND
Power
GND
GND
Power
Description
Ground.
Digital Power Supply (1.8 V).
HDCP Slave Serial Clock for HDMI Tx2. This pin is open drain; use a 2 kΩ resistor to
connect this pin to the HDMI Tx 5 V supply.
Ground.
HDMI2 Channel 2 True Output.
HDMI2 Channel 2 Complementary Output.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
HDCP Slave Serial Data for HDMI Tx2. This pin is open drain; use a 2 kΩ resistor to
connect this pin to the HDMI Tx 5 V supply.
Ground.
HDMI2 Channel 1 True Output.
HDMI2 Channel 1 Complementary Output.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Hot Plug Assert Signal Input for HDMI Tx2.
Ground.
HDMI2 Channel 0 True Output.
HDMI2 Channel 0 Complementary Output.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Ground.
Ground.
Digital Power Supply (1.8 V).
Ground.
Ground.
Digital Power Supply (1.8 V).
Rev. B | Page 45 of 64
ADV8003
Data Sheet
Pin No.
U13
U14
U15
U16
U17
U20
Mnemonic
GND
GND
DVDD
GND
GND
R_TX2
Type
GND
GND
Power
GND
GND
HDMI Tx21
U21
U22
U23
V1
V2
V3
V4
V20
V21
V22
V23
W1
W2
W3
W4
W20
W21
W22
W23
Y1
Y2
Y3
Y4
Y5
Y6
Y7
Y8
Y9
Y10
Y11
Y12
Y13
Y14
Y15
Y16
Y17
Y18
Y19
Y20
Y21
Y22
Y23
AA1
AA2
AA3
AA4
AA5
AA6
AA7
GND
TX2_C+
TX2_C−
P[6]
P[7]
P[8]
P[9]
GND
PVDD6
HEAC_2+
HEAC_2−
P[2]
P[3]
P[4]
P[5]
TEST3
PVDD6
AVDD3
NC
P[0]
P[1]
DDR_DQS[2]
GND
DDR_DQ[23]
DVDD_DDR
DDR_DQS[3]
GND
DDR_A[11]
DVDD_DDR
DDR_A[4]
GND
DDR_CAS
DVDD_DDR
DDR_CK
GND
DDR_DQ[9]
DVDD_DDR
DDR_DQ[14]
GND
DDR_DQ[6]
PVDD_DDR
GND
DDR_DQ[18]
GND
GND
DDR_DQS[2]
DDR_DQ[26]
DVDD_DDR
DDR_DQS[3]
GND
HDMI Tx2
HDMI Tx2
Digital video input
Digital video input
Digital video input
Digital video input
GND
Power1
HDMI Tx2
HDMI Tx2
Digital video input
Digital video input
Digital video input
Digital video input
Miscellaneous digital
Power1
Power
N/A
Digital video input
Digital video input
DDR interface
GND
DDR interface
Power
DDR interface
GND
DDR interface
Power
DDR interface
GND
DDR interface
Power
DDR interface
GND
DDR Interface
Power
DDR interface
GND
DDR interface
Power
GND
DDR interface
GND
GND
DDR interface
DDR interface
Power
DDR interface
Description
Ground.
Ground.
Digital Power Supply (1.8 V).
Ground.
Ground.
Sets internal reference currents. Place a 470 Ω resistor (1% tolerance) between this
pin and ground, as close as possible to the ADV8003.
Ground.
HDMI2 Clock True Output.
HDMI2 Clock Complementary Output.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Ground.
HDMI Tx PLL Power Supply (1.8 V).
HDMI Tx2 HEC+ from the HDMI Connector.
HDMI Tx2 HEC− from the HDMI Connector.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Test Pin. Connect this pin to ground through a 0.1 µF capacitor.
HDMI Tx PLL Power Supply (1.8 V).
HDMI Analog Power Supply (1.8 V).
No Connect. Do not connect to this pin.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Data Strobe for DDR Data Bytes[23:16].
Ground.
Data Line. Interface to external RAM data lines.
DDR Interface Supply (1.8 V).
Data Strobe for DDR Data Bytes[31:24].
Ground.
Address Line. Interface to external RAM address lines.
DDR Interface Supply (1.8 V).
Address Line. Interface to external RAM address lines.
Ground.
Column Address Strobe for DDR Memory.
DDR Interface Supply (1.8 V).
DDR Memory Clock. Interface to external DDR RAM clock lines.
Ground.
Data Line. Interface to external RAM data lines.
DDR Interface Supply (1.8 V).
Data Line. Interface to external RAM data lines.
Ground.
Data Line. Interface to external RAM data lines.
DDR Interface PLL Supply (1.8 V).
Ground.
Data Line. Interface to external RAM data lines.
Ground.
Ground.
Data Strobe for DDR Data Bytes[23:16].
Data Line. Interface to external RAM data lines.
DDR Interface Supply (1.8 V).
Data Strobe for DDR Data Bytes[31:24].
Rev. B | Page 46 of 64
Data Sheet
ADV8003
Pin No.
AA8
Mnemonic
NC/GND
Type
No connect/GND
AA9
AA10
AA11
AA12
AA13
AA14
AA15
AA16
AA17
AA18
AA19
AA20
AA21
AA22
AA23
AB1
AB2
AB3
AB4
AB5
AB6
AB7
AB8
AB9
AB10
AB11
AB12
AB13
AB14
AB15
AB16
AB17
AB18
AB19
AB20
AB21
AB22
AB23
AC1
AC2
AC3
AC4
AC5
AC6
AC7
AC8
AC9
AC10
AC11
AC12
AC13
AC14
AC15
AC16
DDR_A[8]
DVDD_DDR
DDR_A[2]
GND
DDR_CS
DVDD_DDR
DDR_CK
GND
DDR_DQ[11]
DVDD_DDR
DDR_DM[1]
DDR_DM[0]
GND
GND
DDR_DQ[3]
DDR_DQ[21]
DDR_DQ[19]
DDR_DQ[17]
DDR_DM[2]
DDR_DQ[30]
DDR_DM[3]
DDR_DQ[31]
DDR_DQ[29]
DDR_A[12]
DDR_A[6]
DDR_A[3]
DDR_A[0]
DDR_BA[0]
DDR_RAS
DDR_CKE
DDR_DQ[12]
DDR_DQS[1]
DDR_DQ[8]
DDR_DQ[13]
DDR_DQ[0]
DDR_DQ[5]
DDR_DQS[0]
DDR_DQ[4]
DDR_DQ[16]
DDR_DQ[20]
DDR_DQ[22]
DDR_DQ[25]
DDR_DQ[28]
DDR_DQ[27]
DDR_DQ[24]
DDR_A[9]
DDR_A[5]
DDR_A[7]
DDR_A[1]
DDR_A[10]
DDR_BA[1]
DDR_BA[2]
DDR_WE
DDR_VREF
DDR interface
Power
DDR interface
GND
DDR interface
Power
DDR interface
GND
DDR interface
Power
DDR interface
DDR interface
GND
GND
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface1
Description
For new ADV8003 designs, do not connect to this pin. For designs that must maintain
consistency with the ADV8002, this pin can be grounded.
Address Line. Interface to external RAM address lines.
DDR Interface Supply (1.8 V).
Address Line. Interface to external RAM address lines.
Ground.
DDR Chip Select. Interface to external DDR RAM chip selects.
DDR Interface Supply (1.8 V).
DDR Memory Clock. Interface to external DDR RAM clock lines.
Ground.
Data Line. Interface to external RAM data lines.
DDR Interface Supply (1.8 V).
Data Mask for Data Lines[15:8].
Data Mask for Data Lines[7:0].
Ground.
Ground.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Mask for Data Lines[23:16].
Data Line. Interface to external RAM data lines.
Data Mask for Data Lines[31:25].
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Bank Address Line. Indicates which data bank to write/read from.
Row Address Strobe for DDR Memory.
Clock Enable for External DDR Memory.
Data Line. Interface to external RAM data lines.
Data Strobe for DDR Data Bytes[15:8].
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Strobe for DDR Data Bytes[7:0].
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Bank Address Line. Indicates which data bank to write/read from.
Bank Address Line. Indicates which data bank to write/read from.
Write Enable Signal for DDR RAM.
Reference Voltage for DDR RAM.
Rev. B | Page 47 of 64
ADV8003
Pin No.
AC17
AC18
AC19
AC20
AC21
AC22
AC23
1
Mnemonic
DDR_DQ[10]
DDR_DQS[1]
DDR_DQ[15]
DDR_DQ[7]
DDR_DQ[2]
DDR_DQS[0]
DDR_DQ[1]
Data Sheet
Type
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
Description
Data Line. Interface to external RAM data lines.
Data Strobe for DDR Data Bytes[15:8].
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Strobe for DDR Data Bytes[7:0].
Data Line. Interface to external RAM data lines.
Sensitive node. Careful layout is important. Keep the associated circuitry as close as possible to the ADV8003.
Rev. B | Page 48 of 64
ADV8003
1
2
3
4
5
A
OSD_
IN[23]/
EXT_
DIN[7]
OSD_
DE
OSD_
CLK/
EXT_
CLK
TEST4
TEST5
B
OSD_
IN[21]/
EXT_
DIN[5]
OSD_
IN[22]/
EXT_
DIN[6]
OSD_
VS
TEST8
TEST9 TEST10 TEST11 MISO1
C
OSD_
IN[19]/
EXT_
DIN[3]
OSD_
IN[20]/
EXT_
DIN[4]
GND
D
OSD_
IN[16]/
EXT_
DIN[0]
OSD_
IN[17]/
EXT_
DIN[1]
OSD_
IN[18]/
EXT_
DIN[2]
E
OSD_
OSD_
OSD_
IN[13]/
IN[14]/
IN[15]/
VBI_SCK VBI_MOSI VBI_CS
6
7
22
23
RX_2N CVDD1
NC
NC
A
RX_CP RX_0P RX_1P
RX_2P
NC
NC
B
AVDD1 AVDD1
NC
NC
C
RTERM AVDD2 AVDD2
NC
NC
D
DVDD_
IO
TEST2
GND
NC
NC
E
NC
PVDD3
GND
NC
F
TEST6 TEST7
8
9
10
MOSI1
SCK2
CS2
MOSI2 MISO2
11
12
13
RESET XTALN PVDD2
ALSB
XTALP PVDD1
14
15
16
NC
NC
NC
NC
GND
17
18
CVDD1 RX_CN RX_0N RX_1N
TEST12 TEST13 TEST14
SCL
SCK1
GND
INT0
PDN
GND
GND
NC
NC
RX_
HPD
AVDD1
GND
DVDD_
TEST15
IO
SDA
CS1
GND
TEST16
INT2
DVDD_
IO
TEST1
NC
NC
RX_5V
NC
NC
GND
19
GND
20
21
GND
F
OSD_
IN[9]
OSD_
IN[10]
OSD_
IN[11]
OSD_
IN[12]
G
OSD_
IN[5]
OSD_
IN[6]
OSD_
IN[7]
OSD_
IN[8]
GND
GND
GND
DVDD
GND
GND
DVDD
GND
GND
GND
GND
ELPF1
ELPF2
GND
AVDD3
G
H
OSD_
IN[1]
OSD_
IN[2]
OSD_
IN[3]
OSD_
IN[4]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
NC
H
J
DE
HS
OSD_
HS
OSD_
IN[0]
DVDD
GND
GND
GND
GND
GND
GND
GND
GND
GND
DVDD
NC
GND
NC
NC
J
DVDD_ DVDD_
IO
IO
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
GND
NC
NC
K
K
VS
PCLK
L
P[32]
P[33]
P[34]
P[35]
DVDD
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
GND
NC
NC
L
M
P[28]
P[29]
P[30]
P[31]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
PVDD5
NC
NC
M
N
P[24]
P[25]
P[26]
P[27]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
PVDD5 AVDD3
NC
N
P
P[20]
P[21]
P[22]
P[23]
DVDD
GND
GND
GND
GND
GND
GND
GND
GND
GND
DVDD
NC
GND
NC
NC
P
R
P[16]
P[17]
P[18]
P[19]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
GND
NC
NC
R
T
P[14]
P[15]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
GND
NC
NC
T
U
P[10]
P[11]
P[12]
P[13]
GND
GND
DVDD
GND
GND
DVDD
GND
GND
DVDD
GND
GND
NC
GND
NC
NC
U
V
P[6]
P[7]
P[8]
P[9]
GND
PVDD6
NC
NC
V
W
P[2]
P[3]
P[4]
P[5]
TEST3
NC
W
Y
P[0]
P[1]
DDR_
DQS[2]
AA
DDR_
DQ[18]
GND
GND
AB
DDR_
DDR_
DDR_
DQ[21] DQ[19] DQ[17]
AC
DDR_
DDR_
DDR_
DDR_ DDR_
DDR_
DDR_ DDR_
DQ[16] DQ[20] DQ[22] DQ[25] DQ[28] DQ[27] DQ[24] A[9]
1
2
3
DDR_ DVDD_ DDR_
DQ[23] DDR
DQS[3]
DDR_ DDR_ DVDD_ DDR_
DQS[2] DQ[26] DDR DQS[3]
GND
DDR_
DM[2]
4
DDR_
DQ[30]
5
DDR_
DM[3]
6
DVDD_
DDR
DDR_
CK
GND
DDR_
DQ[9]
DDR_
A[2]
GND
DDR_
CS
DVDD_
DDR
DDR_
CK
GND
DDR_ DVDD_
DQ[11]
DDR
DDR_
A[6]
DDR_
A[3]
DDR_
A[0]
DDR_
BA[0]
DDR_
RAS
DDR_
CKE
DDR_
DDR_
DQ[12] DQS[1]
DDR_
A[5]
DDR_
A[7]
DDR_
A[1]
DDR_
A[10]
DDR_
BA[1]
DDR_
BA[2]
DDR_
WE
DDR_
VREF
9
10
12
13
14
15
16
GND
DVDD_
DDR
DDR_
A[4]
NC/
GND
DDR_
A[8]
DVDD_
DDR
DDR_
A[12]
DDR_ DDR_
DQ[31] DQ[29]
7
GND
DDR_
CAS
DDR_
A[11]
8
11
Figure 32. ADV8003KBCZ-7T Pin Configuration
Rev. B | Page 49 of 64
GND
DDR_
DQ[6]
PVDD_
DDR
GND
Y
DDR_
DM[1]
DDR_
DM[0]
GND
GND
DDR_
DQ[3]
AA
DDR_
DQ[13]
DDR_
DQ[0]
DDR_
DQ[5]
DDR_
DQS[0]
DDR_
DQ[4]
AB
DDR_
DDR_
DDR_
DQ[10] DQS[1] DQ[15]
DDR_
DQ[7]
DDR_
DQ[2]
DDR_
DQS[0]
DDR_
DQ[1]
AC
20
21
22
23
17
DVDD_ DDR_
DQ[14]
DDR
PVDD6 AVDD3
DDR_
DQ[8]
18
19
10556-132
Data Sheet
ADV8003
Data Sheet
Table 9. ADV8003KBCZ-7T Pin Function Descriptions
Pin No.
A1
Mnemonic
OSD_IN[23]/EXT_DIN[7]
Type
OSD video input/
miscellaneous digital
OSD video sync
OSD video sync
A2
A3
OSD_DE
OSD_CLK/EXT_CLK
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18
A19
A20
A21
A22
A23
B1
TEST4
TEST5
TEST6
TEST7
MOSI1
SCK2
CS2
RESET
XTALN
PVDD2
NC
NC
CVDD1
RX_CN
RX_0N
RX_1N
RX_2N
CVDD1
NC
NC
OSD_IN[21]/EXT_DIN[5]
B2
OSD_IN[22]/EXT_DIN[6]
B3
B4
B5
B6
B7
B8
B9
B10
B11
OSD_VS
TEST8
TEST9
TEST10
TEST11
MISO1
MOSI2
MISO2
ALSB
Miscellaneous digital1
Power
N/A
N/A
Power
Rx input
Rx input
Rx input
Rx input
Power
N/A
N/A
OSD video input/
miscellaneous digital
OSD video input/
miscellaneous digital
OSD video sync
Miscellaneous digital
Miscellaneous digital
Miscellaneous digital
Miscellaneous digital
Serial port control
Serial port control
Serial port control
I2C control
B12
B13
B14
B15
B16
B17
B18
B19
B20
B21
B22
B23
XTALP
PVDD1
NC
NC
GND
RX_CP
RX_0P
RX_1P
RX_2P
GND
NC
NC
Miscellaneous digital 1
Power
N/A
N/A
GND
Rx input
Rx input
Rx input
Rx input
GND
N/A
N/A
Miscellaneous digital
Miscellaneous digital
Miscellaneous digital
Miscellaneous digital
Serial port control
Serial port control
Serial port control
Miscellaneous digital
Description
External OSD Video Pixel Input Port (OSD_IN[23])/Additional TTL Input for
External CCIR 656 Video Data (EXT_DIN[7]).
Data Enable for the OSD Input Port.
Pixel Clock for the OSD Input Port (OSD_CLK)/Pixel Clock for External Video Data
(EXT_CLK).
Test Pin. Connect this pin to ground through a 4.7 kΩ resistor.
Test Pin. Connect this pin to ground through a 4.7 kΩ resistor.
Test Pin. Connect this pin to ground through a 4.7 kΩ resistor.
Test Pin. Connect this pin to ground through a 4.7 kΩ resistor.
Master Out Slave In (Serial Port 1). Serial Port 1 is used for OSD control.
Serial Clock (Serial Port 2). Serial Port 2 is used for the external flash ROM.
Chip Select (Serial Port 2). Serial Port 2 is used for the external flash ROM.
Reset Pin.
Crystal Input.
PLL Digital Supply Voltage (1.8 V).
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Comparator Supply Voltage (1.8 V).
Rx Clock Complement Input.
Rx Channel 0 Complement Input.
Rx Channel 1 Complement Input.
Rx Channel 2 Complement Input.
Comparator Supply Voltage (1.8 V).
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
External OSD Video Pixel Input Port (OSD_IN[21])/Additional TTL Input for
External CCIR 656 Video Data (EXT_DIN[5]).
External OSD Video Pixel Input Port (OSD_IN[22])/Additional TTL Input for
External CCIR 656 Video Data (EXT_DIN[6]).
Vertical Sync for the OSD Input Port.
Test Pin. Connect this pin to ground through a 4.7 kΩ resistor.
Test Pin. Connect this pin to ground through a 4.7 kΩ resistor.
Test Pin. Connect this pin to ground through a 4.7 kΩ resistor.
Test Pin. Connect this pin to ground through a 4.7 kΩ resistor.
Master In Slave Out (Serial Port 1). Serial Port 1 is used for OSD control.
Master Out Slave In (Serial Port 2). Serial Port 2 is used for the external flash ROM.
Master In Slave Out (Serial Port 2). Serial Port 2 is used for the external flash ROM.
Sets LSB of I2C address. When the ALSB pin is set low, the I2C address is 0x18;
when the ALSB pin is set high, the I2C address is 0x1A.
Crystal Input.
PLL Analog Supply Voltage (1.8 V).
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Ground.
Rx Clock True Input.
Rx Channel 0 True Input.
Rx Channel 1 True Input.
Rx Channel 2 True Input.
Ground.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Rev. B | Page 50 of 64
Data Sheet
ADV8003
Pin No.
C1
Mnemonic
OSD_IN[19]/EXT_DIN[3]
Type
OSD video input/
miscellaneous digital
OSD video input/
miscellaneous digital
GND
Miscellaneous digital
Miscellaneous digital
Miscellaneous digital
I2C control
C2
OSD_IN[20]/EXT_DIN[4]
C3
C4
C5
C6
C7
GND
TEST12
TEST13
TEST14
SCL
C8
C9
C10
C11
C12
C13
C14
C15
C16
C17
C18
C19
C20
C21
C22
C23
D1
SCK1
GND
INT0
PDN
GND
GND
NC
NC
RX_HPD
AVDD1
GND
GND
AVDD1
AVDD1
NC
NC
OSD_IN[16]/EXT_DIN[0]
D2
OSD_IN[17]/EXT_DIN[1]
D3
OSD_IN[18]/EXT_DIN[2]
D4
D5
D6
D7
GND
DVDD_IO
TEST15
SDA
Serial port control
GND
Miscellaneous digital
Miscellaneous digital
GND
GND
N/A
N/A
Rx input
Power
GND
GND
Power
Power
N/A
N/A
OSD video input/
miscellaneous digital
OSD video input/
miscellaneous digital
OSD video input/
miscellaneous digital
GND
Power
Miscellaneous digital
I2C control
D8
D9
D10
D11
CS1
GND
TEST16
INT2
Serial port control
GND
Miscellaneous digital
Miscellaneous digital
D12
D13
D14
D15
D16
D17
D18
D19
DVDD_IO
TEST1
NC
NC
RX_5V
NC
NC
RTERM
Power
Miscellaneous digital
N/A
N/A
Rx input
N/A
N/A
HDMI Rx input
D20
D21
D22
D23
AVDD2
AVDD2
NC
NC
Power
Power
N/A
N/A
Description
External OSD Video Pixel Input Port (OSD_IN[19])/Additional TTL Input for
External CCIR 656 Video Data (EXT_DIN[3]).
External OSD Video Pixel Input Port (OSD_IN[20])/Additional TTL Input for
External CCIR 656 Video Data (EXT_DIN[4]).
Ground.
Test Pin. Connect this pin to ground through a 4.7 kΩ resistor.
Test Pin. Connect this pin to ground through a 4.7 kΩ resistor.
Test Pin. Connect this pin to ground through a 4.7 kΩ resistor.
I2C Clock Input. This pin is open drain; use a 4.7 kΩ resistor to connect this pin to a
3.3 V supply.
Serial Clock (Serial Port 1). Serial Port 1 is used for OSD control.
Ground.
Interrupt Pin 0. When status bits change, this pin is triggered.
Power-Down. This pin controls the power state of the ADV8003.
Ground.
Ground.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Hot Plug Assert Signal Output for the Rx Input.
HDMI Rx Inputs Analog Supply (3.3 V).
Ground.
Ground.
HDMI Rx Inputs Analog Supply (3.3 V).
HDMI Rx Inputs Analog Supply (3.3 V).
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
External OSD Video Pixel Input Port (OSD_IN[16])/Additional TTL Input for
External CCIR 656 Video Data (EXT_DIN[0]).
External OSD Video Pixel Input Port (OSD_IN[17])/Additional TTL Input for
External CCIR 656 Video Data (EXT_DIN[1]).
External OSD Video Pixel Input Port (OSD_IN[18])/Additional TTL Input for
External CCIR 656 Video Data (EXT_DIN[2]).
Ground.
Digital Interface Supply (3.3 V).
Test Pin. Connect this pin to ground through a 4.7 kΩ resistor.
I2C Data Input. This pin is open drain; use a 4.7 kΩ resistor to connect this pin to a
3.3 V supply.
Chip Select (Serial Port 1). Serial Port 1 is used for OSD control.
Ground.
Test Pin. Connect this pin to ground through a 4.7 kΩ resistor.
Interrupt Pin for HDMI Receiver Input Lines. When status bits change, an interrupt
is generated on this pin.
Digital Interface Supply (3.3 V).
Test Pin. Float this pin.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
5 V Detect Pin for the Rx Input.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
This pin sets internal termination resistance. Use a 500 Ω resistor between this pin
and GND. Place the RTERM resistor as close as possible to the ADV8003.
Analog Power Supply (3.3 V).
Analog Power Supply (3.3 V).
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Rev. B | Page 51 of 64
ADV8003
Pin No.
E1
Mnemonic
OSD_IN[13]/VBI_SCK
E2
OSD_IN[14]/VBI_MOSI
E3
OSD_IN[15]/VBI_CS
E4
E20
E21
E22
E23
F1
F2
F3
F4
DVDD_IO
TEST2
GND
NC
NC
OSD_IN[9]
OSD_IN[10]
OSD_IN[11]
OSD_IN[12]
F20
F21
F22
F23
G1
G2
G3
G4
G7
G8
G9
G10
G11
G12
G13
G14
G15
G16
G17
G20
G21
G22
G23
H1
H2
H3
H4
H7
H8
H9
H10
H11
H12
H13
H14
H15
H16
H17
H20
H21
NC
PVDD3
GND
NC
OSD_IN[5]
OSD_IN[6]
OSD_IN[7]
OSD_IN[8]
GND
GND
GND
DVDD
GND
GND
DVDD
GND
GND
GND
GND
ELPF1
ELPF2
GND
AVDD3
OSD_IN[1]
OSD_IN[2]
OSD_IN[3]
OSD_IN[4]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
Data Sheet
Type
OSD video input/
miscellaneous digital
OSD video input/
miscellaneous digital
OSD video input/
miscellaneous digital
Power
Miscellaneous analog
GND
N/A
N/A
OSD video input
OSD video input
OSD video input
OSD video input/
miscellaneous digital
N/A
Power
GND
N/A
OSD video input
OSD video input
OSD video input
OSD video input
GND
GND
GND
Power
GND
GND
Power
GND
GND
GND
GND
Miscellaneous analog1
Miscellaneous analog1
GND
Power
OSD video input
OSD video input
OSD video input
OSD video input
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
Description
External OSD Video Pixel Input Port (OSD_IN[13])/Serial Clock for VBI Data Serial
Port (VBI_SCK).
External OSD Video Pixel Input Port (OSD_IN[14])/Master Out Slave In for VBI Data
Serial Port (VBI_MOSI).
External OSD Video Pixel Input Port (OSD_IN[15])/Chip Select for VBI Data Serial
Port (VBI_CS).
Digital Interface Supply (3.3 V).
Test Pin. Float this pin.
Ground.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
External OSD Video Pixel Input Port (OSD_IN[9]).
External OSD Video Pixel Input Port (OSD_IN[10]).
External OSD Video Pixel Input Port (OSD_IN[11]).
External OSD Video Pixel Input Port (OSD_IN[11]).
No Connect. Do not connect to this pin.
PLL Supply (1.8 V).
Ground.
No Connect. Do not connect to this pin.
External OSD Video Pixel Input Port (OSD_IN[5]).
External OSD Video Pixel Input Port (OSD_IN[6]).
External OSD Video Pixel Input Port (OSD_IN[7]).
External OSD Video Pixel Input Port (OSD_IN[8]).
Ground.
Ground.
Ground.
Digital Power Supply (1.8 V).
Ground.
Ground.
Digital Power Supply (1.8 V).
Ground.
Ground.
Ground.
Ground.
External Loop Filter for PLL 1. Connect to PVDD3.
External Loop Filter for PLL 2. Connect to PVDD3.
Ground.
HDMI Analog Power Supply (1.8 V).
External OSD Video Pixel Input Port (OSD_IN[1]).
External OSD Video Pixel Input Port (OSD_IN[2]).
External OSD Video Pixel Input Port (OSD_IN[3]).
External OSD Video Pixel Input Port (OSD_IN[4]).
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Rev. B | Page 52 of 64
Data Sheet
Pin No.
H22
H23
J1
J2
J3
J4
J7
J8
J9
J10
J11
J12
J13
J14
J15
J16
J17
J20
J21
J22
J23
K1
K2
K3
K4
K7
K8
K9
K10
K11
K12
K13
K14
K15
K16
K17
K20
K21
K22
K23
L1
L2
L3
L4
L7
L8
L9
L10
L11
L12
L13
L14
L15
L16
L17
L20
Mnemonic
NC
NC
DE
HS
OSD_HS
OSD_IN[0]
DVDD
GND
GND
GND
GND
GND
GND
GND
GND
GND
DVDD
NC
GND
NC
NC
VS
PCLK
DVDD_IO
DVDD_IO
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
GND
NC
NC
P[32]
P[33]
P[34]
P[35]
DVDD
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
ADV8003
Type
N/A
N/A
Digital video sync
Digital video sync
Digital video sync
OSD video input
Power
GND
GND
GND
GND
GND
GND
GND
GND
GND
Power
N/A
GND
N/A
N/A
Digital video sync
Digital video sync
Power
Power
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
N/A
GND
N/A
N/A
Digital video input
Digital video input
Digital video input
Digital video input
Power
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
N/A
Description
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Data Enable for Digital Input Video.
Horizontal Sync for Digital Input Video.
Horizontal Sync for the OSD Input Port (OSD_HS).
External OSD Video Pixel Input Port (OSD_IN[0]).
Digital Power Supply (1.8 V).
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Digital Power Supply (1.8 V).
No Connect. Do not connect to this pin.
Ground.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Vertical Sync for Digital Input Video.
Pixel Clock for Digital Input Video.
Digital Interface Supply (3.3 V).
Digital Interface Supply (3.3 V).
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
No Connect. Do not connect to this pin.
Ground.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Power Supply (1.8 V).
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
No Connect. Do not connect to this pin.
Rev. B | Page 53 of 64
ADV8003
Pin No.
L21
L22
L23
M1
M2
M3
M4
M7
M8
M9
M10
M11
M12
M13
M14
M15
M16
M17
M20
M21
M22
M23
N1
N2
N3
N4
N7
N8
N9
N10
N11
N12
N13
N14
N15
N16
N17
N20
N21
N22
N23
P1
P2
P3
P4
P7
P8
P9
P10
P11
P12
P13
P14
P15
P16
P17
Mnemonic
GND
NC
NC
P[28]
P[29]
P[30]
P[31]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
PVDD5
NC
NC
P[24]
P[25]
P[26]
P[27]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
PVDD5
AVDD3
NC
P[20]
P[21]
P[22]
P[23]
DVDD
GND
GND
GND
GND
GND
GND
GND
GND
GND
DVDD
Data Sheet
Type
GND
N/A
N/A
Digital video input
Digital video input
Digital video input
Digital video input
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
N/A
Power1
N/A
N/A
Digital video input
Digital video input
Digital video input
Digital video input
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
N/A
Power1
Power
N/A
Digital video input
Digital video input
Digital video input
Digital video input
Power
GND
GND
GND
GND
GND
GND
GND
GND
GND
Power
Description
Ground.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
No Connect. Do not connect to this pin.
PLL Power Supply (1.8 V).
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
No Connect. Do not connect to this pin.
PLL Power Supply (1.8 V).
HDMI Analog Power Supply (1.8 V).
No Connect. Do not connect to this pin.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Power Supply (1.8 V).
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Digital Power Supply (1.8 V).
Rev. B | Page 54 of 64
Data Sheet
Pin No.
P20
P21
P22
P23
R1
R2
R3
R4
R7
R8
R9
R10
R11
R12
R13
R14
R15
R16
R17
R20
R21
R22
R23
T1
T2
T3
T4
T7
T8
T9
T10
T11
T12
T13
T14
T15
T16
T17
T20
T21
T22
T23
U1
U2
U3
U4
U7
U8
U9
U10
U11
U12
U13
U14
U15
U16
Mnemonic
NC
GND
NC
NC
P[16]
P[17]
P[18]
P[19]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
GND
NC
NC
P[14]
P[15]
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
NC
GND
NC
NC
P[10]
P[11]
P[12]
P[13]
GND
GND
DVDD
GND
GND
DVDD
GND
GND
DVDD
GND
ADV8003
Type
N/A
GND
N/A
N/A
Digital video input
Digital video input
Digital video input
Digital video input
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
N/A
GND
N/A
N/A
Digital video input
Digital video input
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
N/A
GND
N/A
N/A
Digital video input
Digital video input
Digital video input
Digital video input
GND
GND
Power
GND
GND
Power
GND
GND
Power
GND
Description
No Connect. Do not connect to this pin.
Ground.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
No Connect. Do not connect to this pin.
Ground.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
No Connect. Do not connect to this pin.
Ground.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Ground.
Ground.
Digital Power Supply (1.8 V).
Ground.
Ground.
Digital Power Supply (1.8 V).
Ground.
Ground.
Digital Power Supply (1.8 V).
Ground.
Rev. B | Page 55 of 64
ADV8003
Data Sheet
Pin No.
U17
U20
U21
U22
U23
V1
V2
V3
V4
V20
V21
V22
V23
W1
W2
W3
W4
W20
W21
W22
W23
Y1
Y2
Y3
Y4
Y5
Y6
Y7
Y8
Y9
Y10
Y11
Y12
Y13
Y14
Y15
Y16
Y17
Y18
Y19
Y20
Y21
Y22
Y23
AA1
AA2
AA3
AA4
AA5
AA6
AA7
AA8
Mnemonic
GND
NC
GND
NC
NC
P[6]
P[7]
P[8]
P[9]
GND
PVDD6
NC
NC
P[2]
P[3]
P[4]
P[5]
TEST3
PVDD6
AVDD3
NC
P[0]
P[1]
DDR_DQS[2]
GND
DDR_DQ[23]
DVDD_DDR
DDR_DQS[3]
GND
DDR_A[11]
DVDD_DDR
DDR_A[4]
GND
DDR_CAS
DVDD_DDR
DDR_CK
GND
DDR_DQ[9]
DVDD_DDR
DDR_DQ[14]
GND
DDR_DQ[6]
PVDD_DDR
GND
DDR_DQ[18]
GND
GND
DDR_DQS[2]
DDR_DQ[26]
DVDD_DDR
DDR_DQS[3]
NC/GND
Type
GND
N/A
GND
N/A
N/A
Digital video input
Digital video input
Digital video input
Digital video input
GND
Power1
N/A
N/A
Digital video input
Digital video input
Digital video input
Digital video input
Miscellaneous digital
Power1
Power
N/A
Digital video input
Digital video input
DDR interface
GND
DDR interface
Power
DDR interface
GND
DDR interface
Power
DDR interface
GND
DDR interface
Power
DDR interface
GND
DDR Interface
Power
DDR interface
GND
DDR interface
Power
GND
DDR interface
GND
GND
DDR interface
DDR interface
Power
DDR interface
No connect/GND
AA9
AA10
AA11
DDR_A[8]
DVDD_DDR
DDR_A[2]
DDR interface
Power
DDR interface
Description
Ground.
No Connect. Do not connect to this pin.
Ground.
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Ground.
PLL Power Supply (1.8 V).
No Connect. Do not connect to this pin.
No Connect. Do not connect to this pin.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Test Pin. Connect this pin to Ground through a 0.1 µF capacitor.
PLL Power Supply (1.8 V).
HDMI Analog Power Supply (1.8 V).
No Connect. Do not connect to this pin.
Digital Video Input Bus[35:0].
Digital Video Input Bus[35:0].
Data Strobe for DDR Data Bytes[23:16].
Ground.
Data Line. Interface to external RAM data lines.
DDR Interface Supply (1.8 V).
Data Strobe for DDR Data Bytes[31:24].
Ground.
Address Line. Interface to external RAM address lines.
DDR Interface Supply (1.8 V).
Address Line. Interface to external RAM address lines.
Ground.
Column Address Strobe for DDR Memory.
DDR Interface Supply (1.8 V).
DDR Memory Clock. Interface to external DDR RAM clock lines.
Ground.
Data Line. Interface to external RAM data lines.
DDR Interface Supply (1.8 V).
Data Line. Interface to external RAM data lines.
Ground.
Data Line. Interface to external RAM data lines.
DDR Interface PLL Supply (1.8 V).
Ground.
Data Line. Interface to external RAM data lines.
Ground.
Ground.
Data Strobe for DDR Data Bytes[23:16].
Data Line. Interface to external RAM data lines.
DDR Interface Supply (1.8 V).
Data Strobe for DDR Data Bytes[31:24].
For new ADV8003 designs, do not connect to this pin. For designs that must
maintain consistency with the ADV8002, this pin can be grounded.
Address Line. Interface to external RAM address lines.
DDR Interface Supply (1.8 V).
Address Line. Interface to external RAM address lines.
Rev. B | Page 56 of 64
Data Sheet
Pin No.
AA12
AA13
AA14
AA15
AA16
AA17
AA18
AA19
AA20
AA21
AA22
AA23
AB1
AB2
AB3
AB4
AB5
AB6
AB7
AB8
AB9
AB10
AB11
AB12
AB13
AB14
AB15
AB16
AB17
AB18
AB19
AB20
AB21
AB22
AB23
AC1
AC2
AC3
AC4
AC5
AC6
AC7
AC8
AC9
AC10
AC11
AC12
AC13
AC14
AC15
AC16
AC17
AC18
AC19
AC20
Mnemonic
GND
DDR_CS
DVDD_DDR
DDR_CK
GND
DDR_DQ[11]
DVDD_DDR
DDR_DM[1]
DDR_DM[0]
GND
GND
DDR_DQ[3]
DDR_DQ[21]
DDR_DQ[19]
DDR_DQ[17]
DDR_DM[2]
DDR_DQ[30]
DDR_DM[3]
DDR_DQ[31]
DDR_DQ[29]
DDR_A[12]
DDR_A[6]
DDR_A[3]
DDR_A[0]
DDR_BA[0]
DDR_RAS
DDR_CKE
DDR_DQ[12]
DDR_DQS[1]
DDR_DQ[8]
DDR_DQ[13]
DDR_DQ[0]
DDR_DQ[5]
DDR_DQS[0]
DDR_DQ[4]
DDR_DQ[16]
DDR_DQ[20]
DDR_DQ[22]
DDR_DQ[25]
DDR_DQ[28]
DDR_DQ[27]
DDR_DQ[24]
DDR_A[9]
DDR_A[5]
DDR_A[7]
DDR_A[1]
DDR_A[10]
DDR_BA[1]
DDR_BA[2]
DDR_WE
DDR_VREF
DDR_DQ[10]
DDR_DQS[1]
DDR_DQ[15]
DDR_DQ[7]
ADV8003
Type
GND
DDR interface
Power
DDR interface
GND
DDR interface
Power
DDR interface
DDR interface
GND
GND
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface
DDR interface1
DDR interface
DDR interface
DDR interface
DDR interface
Description
Ground.
DDR Chip Select. Interface to external DDR RAM chip selects.
DDR Interface Supply (1.8 V).
DDR Memory Clock. Interface to external DDR RAM clock lines.
Ground.
Data Line. Interface to external RAM data lines.
DDR Interface Supply (1.8 V).
Data Mask for Data Lines[15:8].
Data Mask for Data Lines[7:0].
Ground.
Ground.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Mask for Data Lines[23:16].
Data Line. Interface to external RAM data lines.
Data Mask for Data Lines[31:25].
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Bank Address Line. Indicates which data bank to write/read from.
Row Address Strobe for DDR Memory.
Clock Enable for External DDR Memory.
Data Line. Interface to external RAM data lines.
Data Strobe for DDR Data Bytes[15:8].
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Strobe for DDR Data Bytes[7:0].
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Address Line. Interface to external RAM address lines.
Bank Address Line. Indicates which data bank to write/read from.
Bank Address Line. Indicates which data bank to write/read from.
Write Enable Signal for DDR RAM.
Reference Voltage for DDR RAM.
Data Line. Interface to external RAM data lines.
Data Strobe for DDR Data Bytes[15:8].
Data Line. Interface to external RAM data lines.
Data Line. Interface to external RAM data lines.
Rev. B | Page 57 of 64
ADV8003
Pin No.
AC21
AC22
AC23
1
Mnemonic
DDR_DQ[2]
DDR_DQS[0]
DDR_DQ[1]
Data Sheet
Type
DDR interface
DDR interface
DDR interface
Description
Data Line. Interface to external RAM data lines.
Data Strobe for DDR Data Bytes[7:0].
Data Line. Interface to external RAM data lines.
Sensitive node. Careful layout is important. The associated circuitry should be kept as close as possible to the ADV8003.
Rev. B | Page 58 of 64
Data Sheet
ADV8003
DESIGN CONSIDERATIONS
POWER-UP SEQUENCE
THERMAL CONSIDERATIONS
The power-up sequence of the ADV8003 is as follows:
The thermal performance of the ADV8003 is influenced by
a number of factors, for example, power dissipation of the
ADV8003, PCB design, and ambient temperature.
1.
2.
3.
4.
5.
6.
Hold the RESET and PDN pins low.
Bring up the 3.3 V supplies (DVDD_IO, AVDD1,
AVDD2).
A minimum delay of 20 ms is required from the point at
which the 3.3 V reaches its minimum recommended value
(that is, 3.14 V) before powering up the 1.8 V supplies.
Bring up the 1.8 V supplies (DVDD, PVDD1, PVDD2,
PVDD3, PVDD5, PVDD6, CVDD1, AVDD3, DVDD_DDR,
PVDD_DDR). These should be powered up together. That
is, there should be a difference of less than 0.3 V between
them.
RESET can be pulled high after supplies have been
powered up.
A complete reset is recommended after power-up. This
can be performed by the system microcontroller.
PDN
(C11)
These factors, allied to any other application-specific factors
that may affect the thermal performance of ADV8003, must
be considered to ensure that the junction temperature of the
ADV8003 does not exceed 125°C.
The flexibility of the ADV8003 can, in theory, result in the part
being configured in modes where the junction temperature
exceeds the maximum rated specification. To ensure that this
does not happen, the ADV8003 must be characterized on the
final customer PCB to ensure that maximum rated specifications
are not exceeded in the planned modes of operation. Using
fewer internal layers on a PCB reduces the amount of thermal
conductivity between the ADV8003 and the PCB itself. This
may necessitate some thermal management effort or affect the
modes in which the ADV8003 can be configured.
Calculate thermal conductivity as follows:
0V
1.
3.3V
RESET
(A11)
2.
3.
0V
1.8V
TJ = TC + 5°C
1.8V
SUPPLY
TJ MAX = TA MAX − TA (actual) + TC (actual) + 5°C
TPSS ≥
20ms
RESET >
5ms
0V
Figure 33. Supply Power-Up Sequence
10556-026
0V
3.3V
3.14V
3.3V
SUPPLY
Configure the ADV8003 in the highest required power
mode of operation.
Measure the ambient temperature of the enclosure.
Measure the case temperature at the top of the ADV8003.
where:
TJ is the junction temperature (inside the ADV8003).
TC is the case temperature (top surface of the ADV8003).
TA is the ambient temperature (in the locality of the ADV8003).
Maximum specified TA MAX for the ADV8003 is 70°C. Depending
on the result of the previous calculations/ measurement for the
specific system, a lower TA MAX limit may need to be specified for
that system to ensure that TJ MAX remains safely below 125°C.
Rev. B | Page 59 of 64
ADV8003
Data Sheet
FUNCTIONAL OVERVIEW
VIDEO INPUT
OSD can be placed at numerous locations within the signal chain
to vary the number of outputs on which the OSD is displayed.
PiP can also be supported via the OSD block, using a pixel port
input that is connected to the OSD block. Several modes of
operation are defined to help the user quickly integrate the
ADV8003 into a system.
4-BIT VBI
24-BIT
VIDEO
12-BIT
VIDEO
CORE
48-BIT
VIDEO
LOW ANGLE
PROCESSING
10556-027
SERIAL VIDEO
RECEIVER
VIDEO SIGNAL PROCESSOR (VSP)
CADENCE
DETECTION
MOTION
DETECTION
Figure 34. Digital Video Interface
The ADV8003 can receive data via the 48-bit input pixel port,
the 24-bit OSD input port, or from the output of an HDMI
transmitter.
The 48-bit input pixel port can receive data from an upstream
analog/HDMI front-end device such as the ADV7619. This bus
can accept multiple input formats in both RGB and YPrPb color
spaces. Double data rate (DDR) input formats are also
supported.
The 24-bit input pixel port can also receive video data from an
upstream analog/HDMI front-end device such as the ADV7844
or OSD data from an external OSD generator. This bus can accept
multiple input formats up to UXGA. DDR input formats are
also supported. The video input on the 24-bit pixel port can be
scaled and overlaid onto the main video path.
The serial video receiver can accept the output of an HDMI
transmitter such as the ADV7511, ADV7623 or ADV7850.
Using this configuration, the transceiver can extract HDMI
audio for processing before reinsertion the audio into the
ADV8003 via the audio pins, for output through the HDMI
transmitters. This input does not support EDID or HDCP
operations.
Flexible digital interface features include the following:
•
NOISE
REDUCTION
DUAL SCALER
AND
OSD BLEND
FRC
ENHANCE
DE-INTERLACER
Figure 35. Video Processing
The ADV8003 offers video de-interlacing and scaling. The deinterlacer, located in the primary VSP, is motion adaptive and
offers high performance on low angle edges. It can support input
video resolutions of 480i, 576i, and 1080i.
The dual scalers in the ADV8003 support the Analog Devices
proprietary scaling algorithm, which provides very high quality
video upscaling and downscaling. This scaling algorithm helps
eradicate many of the common problems that are encountered
when scaling video data, such as saw tooth, edge blurring, and
ringing.
The primary and secondary scalers are capable of up- and downscaling between a range of SD and HD video resolutions (for
example, 480p, 576p, 720p, and 1080p). The primary scaler in the
ADV8003KBCZ-8/ADV8003KBCZ-8B/ADV8003KBCZ-8C
models is capable of upscaling to 4k × 2k video resolutions.
Cadence detection and frame rate conversion are also supported
in the ADV8003, which allows film formats to be displayed
at their native frame rate, as well as being converted to the
native refresh rate of the TV. Additional video processing in the
ADV8003 helps with reduction of common video artifacts such as
mosquito, random, and block noise. The ADV8003 also includes
an aspect ratio converter, as well as a panorama mode feature.
Picture-in-picture (PiP) support is possible when receiving
video data on more than one of the video inputs, such as the
48-bit pixel port and the serial video receiver.
•
•
CUE
CORRECTION
DETAIL
ENHANCE
10556-028
8-BIT
CCIR 656
(Up to) 48-bit pixel port for general video data
(Up to) 24-bit pixel port for external OSD, if the ADV8003
internal OSD is not used
Option to connect the output of HDMI transmitter
FLEXIBLE DIGITAL CORE
The ADV8003 has a flexible digital core that enables many
different configurations of single, dual and triple video
processing paths. Video processing can be placed first in the
signal chain to ensure that all outputs are processed to the highest
quality.
The following VSP features are included:
•
•
•
•
•
Rev. B | Page 60 of 64
High performance motion adaptive SD/HD de-interlacer
and scaler
Two scalers, allowing independent scaling on ADV8003
outputs
Frame rate converter, supporting conversion between multiple
frame rates (23.976 Hz, 24 Hz, 25 Hz, 29.97 Hz, 30 Hz, 50 Hz,
59.94 Hz, and 60 Hz)
Noise reduction, which helps with the reduction of random,
block, and mosquito noise
Five manually programmable color space converters that
are distributed between inputs and outputs
Data Sheet
ADV8003
EXTERNAL OSD
HDMI TRANSMITTERS
DDR2
INTERNAL
OSD GENERATOR
OSD BUILD
OSD SCALER
OSD BLEND
VIDEO
10556-029
ON-SCREEN DISPLAY (OSD)
Figure 36. Bitmap OSD
The ADV8003 incorporates a bitmap-based OSD block that
allows users to create impressive OSD designs that can include
bitmap images, as well as motion and animation. Individual
regions of the OSD can be alpha blended and prioritized over
other regions.
An OSD development tool, Blimp, is provided to assist in the
design and development of custom OSDs and to abstract the
OSD hardware from the user. This tool automatically generates
two design elements: a design resource containing character sets
and images that must be downloaded to an external SPI flash on
the board; and code that must be integrated with system APIs
to link the functionality of the OSD with the functionality of
the system.
The OSD design resource is loaded into external DDR2 memories
on power-up by the OSD coprocessor of the ADV8003. This
coprocessor is responsible for handling upper level commands
from the user and translating them into lower level operations
for the OSD and DMA.
OSD features include the following:
•
•
Pixel-by-pixel alpha blending and priority levels assigned
to the different OSD components
A high performance OSD scaler allows the rendering
of OSDs at a single resolution, as well as blending at
different resolutions
EXTERNAL DDR2 MEMORY
FRAME RATE
CONVERSION
BITMAP OSD
DATA
10556-030
VIDEO
SCALING
HDMI Tx features include the following:
•
•
•
•
•
Audio return channel (ARC) support
Mandatory 3D formats and many optional 3D formats
Content type bits
CEC controller
HDMI audio interface and support for multiple audio
formats (S/PDIF, I2S, DSD)
VIDEO ENCODER
The ADV8003 features a high speed digital-to-analog video
encoder. Six 12-bit NSV, 3.3 V video DACs provide support for
worldwide composite (CVBS), S-Video (Y-C), and component
(YPrPb/RGB) analog outputs in standard definition (SD),
enhanced definition (ED), or high definition (HD) video
formats. It is also possible to enable the video encoder of the
ADV8003 to work in simultaneous modes where both an SD
and ED/HD formats are output.
Encoder features include the following:
•
•
•
•
•
•
DDR2 INTERFACE
MOTION
ADAPTIVE
DE-INTERLACER
The ADV8003 features dual HDMI transmitters. The transmitters
provided on the ADV8003KBCZ-8/ADV8003KBCZ-8B/
ADV8003KBCZ-8C support all HDTV formats up to 4k × 2k;
the transmitters on the ADV8003KBCZ-7/ADV8003KBCZ-7B/
ADV8003KBCZ-7C/ADV8003KBCZ-7T support all HDTV
formats up to 1080p. All parts support all of the mandatory and
many of the optional 3D formats, and audio return channel
(ARC), which allows an S/PDIF audio connection between the
source and sink. Each HDMI transmitter features a full function
CEC master and on-chip MPUs with DDC I2C masters to
perform HDCP operations and EDID operations.
Six 12-bit NSV video DACs capable of outputting video
standards of up to 1080p with additional oversampling
Multiformat video output support; composite (CVBS),
S-Video (Y-C), component YPrPb (SD, ED and HD),
and component RGB (SD, ED and HD)
Simultaneous SD and ED/HD operation
Copy generation management system (CGMS)
Closed captioning and widescreen signaling (WSS)
Rovi® Rev. 7.1.L1 (SD) and Rev. 1.4 (ED) compliant
PROFESSIONAL CONFIGURATION
Figure 37. External DDR2 Memory Interface
External DDR2 memory is required for motion adaptive
de-interlacing, scaling, frame rate conversion, and bitmap
OSD overlay. The bandwidth of external memory required
is determined by the input video formats that the ADV8003
must support, as well as the level of video processing required
(scaling, conversion, and OSD). Depending on the input video
resolution and video processing options, one or two DDR2
memories may be required.
To accommodate professional applications where HDMI and
analog video output are not desired, the ADV8003 offers a 30-bit
TTL input, 30-bit TTL output mode. This mode suits applications where a video signal processor is required between two
TTL interfaces (for example, an HDMI receiver and an FPGA).
Rev. B | Page 61 of 64
ADV8003
Data Sheet
REGISTER MAP ARCHITECTURE
The registers of the ADV8003 are controlled via a 2-wire serial
(I2C-compatible) interface. Addressing in the ADV8003 is
16-bit with 8-bit data. This means that I2C writes to the part
are in the following form: <I2C Address>, <Address MSBs>,
<Address LSBs>, <Data>.
For example, to write 0xFF to the encoder register map, which
is Register 0xE4AF, the bytes sent over the I2C interface are:
0x1A, 0xE4, 0xAF, 0xFF. The addresses are outlined in Table 10.
Figure 38 shows the register map architecture for the ADV8003.
The ADV8003 also has a number of SPI register maps used for
OSD functions. These are accessed through the APIs defined in
the Blimp software tool.
Table 10. ADV8003 I2C Address and Register Address Range for the Different HW Blocks
Register Map Name
IO Map
I2C Address
0x1A (when the ALSB pin is set high) or
0x18 (when the ALSB pin is set low)
Primary VSP Map 1
Primary VSP Map 2
Secondary VSP Map
DPLL Map
Rx Main Map
Rx InfoFrame Map
Encoder Map
Tx1 Main Map
Tx1 EDID Map
Tx1 CEC Map
Tx1 UDP Map
Tx1 Test Map
Tx2 Main Map
Tx2 EDID Map
Tx2 CEC Map
Tx2 UDP Map
Tx2 Test Map
I2C
ADDRESS
0x18/0x1A
Register Address
0x1A00 to 0x1BFF
0xE800 to 0xE8FF
0xE900 to 0xE9FF
0xE600 to 0xE6FF
0xE000 to 0xE0FF
0xE200 to 0xE2FF
0xE300 to 0xE3FF
0xE400 to 0xE4FF
0xEC00 to 0xECFF
0xEE00 to 0xEEFF
0xF000 to 0xF0FF
0xF200 to 0xF2FF
0xF300 to 0xF3FF
0xF400 to 0xF4FF
0xF600 to 0xF6FF
0xF800 to 0xF8FF
0xFA00 to 0xFAFF
0xFB00 to 0xFBFF
IO
MAP
PRIMARY VSP
MAP 1
PRIMARY VSP
MAP 2
SECONDARY
VSP MAP
DPLL
MAP
Rx MAIN
MAP
Rx INFOFRAME
MAP
ENCODER
MAP
Tx1 TEST
MAP
0x1A00 TO
0x1BFF
0xE800 TO
0xE8FF
0xE900 TO
0xE9FF
0xE600 TO
0xE6FF
0xE000 TO
0xE0FF
0xE200 TO
0xE2FF
0xE300 TO
0xE3FF
0xE400 TO
0xE4FF
0xF300 TO
0xF3FF
0xEC00 TO
0xECFF
0xEE00 TO
0xEEFF
0xF000 TO
0xF0FF
0xF200 TO
0xF2FF
0xF400 TO
0xF4FF
0xF600 TO
0xF6FF
0xF800 TO
0xF8FF
0xFA00 TO
0xFAFF
0xFB00 TO
0xFBFF
Tx1 MAIN
MAP
Tx1 EDID
MAP
Tx1 CEC
MAP
Tx1 UDP
MAP
Tx2 MAIN
MAP
Tx2 EDID
MAP
Tx2 CEC
MAP
Tx2 UDP
MAP
Tx2 TEST
MAP
Figure 38. Register Map Architecture
Rev. B | Page 62 of 64
10556-031
SCL
SDA
Data Sheet
ADV8003
TYPICAL APPLICATIONS DIAGRAM
SPI
FLASH
SYSTEM
MCU
HDMI
60-BIT
INPUT
COMPOSITE
S-VIDEO
COMPONENT
HDMI
VIDEO
48-BIT
INPUT
VIDEO DECODER/
HDMI Rx
(FOR EXAMPLE,
ADV7844)
SERIAL
VIDEO
RECEIVER
HDMI
HDMI
HDMI
HDMI
HDMI
DDR2 INTERFACE
SPI/I2C
HDMI Tx1
HDMI
HDMI Tx2
HDMI
VIDEO SIGNAL
PROCESSING
HD VIDEO
DACs
HDMI
FRONT END
(FOR EXAMPLE,
ADV7850)
SD VIDEO
DACs
COMPONENT
S-VIDEO
COMPOSITE
ADV8003
AUDIO INSERTED INTO
HDMI VIDEO STREAMS
AUDIO FROM
HDMI
SHARC ®
AUDIO
PROCESSING
Figure 39. System Block Diagram
Rev. B | Page 63 of 64
10556-032
HDMI
DUAL HIGH SPEED
HDMI Rx
(FOR EXAMPLE,
ADV7619)
EXTERNAL DDR2
ADV8003
Data Sheet
OUTLINE DIMENSIONS
A1 BALL
CORNER
19.20
19.00 SQ
18.80
A1 BALL
CORNER
22 20 18 16 14 12 10 8 6 4 2
23 21 19 17 15 13 11 9 7 5 3 1
A
C
E
G
17.60
BSC SQ
J
L
N
0.80
BSC
R
U
W
B
D
F
H
K
M
P
T
V
Y
AA
AB
AC
TOP VIEW
1.50
1.36
1.21
BOTTOM VIEW
DETAIL A
0.65
NOM
DETAIL A
1.11
1.01
0.91
0.35 NOM
0.30 MIN
SEATING
PLANE
0.50
COPLANARITY
0.12
0.45
0.40
BALL DIAMETER
COMPLIANT TO JEDEC STANDARDS MO-275-PPAB-2.
11-22-2011-A
0.35
NOM
Figure 40. 425-Ball Chip Scale Package Ball Grid Array [CSP_BGA]
(BC-425-1)
Dimensions shown in millimeters
ORDERING GUIDE
Model 1, 2
ADV8003KBCZ-8
ADV8003KBCZ-8B
ADV8003KBCZ-8C
ADV8003KBCZ-7
ADV8003KBCZ-7B
ADV8003KBCZ-7C
ADV8003KBCZ-7T
EVAL-ADV8003-SMZ-P
1
2
Temperature Range
0°C to 70°C
0°C to 70°C
0°C to 70°C
0°C to 70°C
0°C to 70°C
0°C to 70°C
0°C to 70°C
Package Description
425-Ball Chip Scale Package Ball Grid Array [CSP_BGA]
425-Ball Chip Scale Package Ball Grid Array [CSP_BGA]
425-Ball Chip Scale Package Ball Grid Array [CSP_BGA]
425-Ball Chip Scale Package Ball Grid Array [CSP_BGA]
425-Ball Chip Scale Package Ball Grid Array [CSP_BGA]
425-Ball Chip Scale Package Ball Grid Array [CSP_BGA]
425-Ball Chip Scale Package Ball Grid Array [CSP_BGA]
ADV8003KBCZ-7C Evaluation Board
Package Option
BC-425-1
BC-425-1
BC-425-1
BC-425-1
BC-425-1
BC-425-1
BC-425-1
Z = RoHS Compliant Part.
The evaluation board does not require HDCP or Rovi licensing.
I2C refers to a communications protocol originally developed by Philips Semiconductors (now NXP Semiconductors).
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
©2012–2013 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D10556-0-8/13(B)
Rev. B | Page 64 of 64