Photoelectric sensors FECK 07P6901/KS35A Through beam sensors dimension drawing 10,7 12,4 7,5 21,4 15,4 13,4 3 8,25 9,3 2x ø 3,2 6,2 ø3 * 3,2 8 18 ø 2,5 M8 x 1 Teach-in LED 23,5 4,6 6 16,2 9,2 10,8 L 1,5 ca. 34 * receiver axis general data photo type through beam sensor emitter / receiver receiver actual range Sb 2 m nominal range Sn 2,5 m alignment / soiled lens indicator flashing light indicator light indicator LED green output indicator LED yellow sensitivity adjustment Teach-in electrical data response time / release time < 0,5 ms voltage supply range +Vs 10 ... 30 VDC current consumption max. (no load) 20 mA current consumption typ. 20 mA voltage drop Vd < 1,8 VDC output function light / dark operate output circuit PNP output current < 100 mA short circuit protection yes reverse polarity protection yes connection diagram PNP BN (1) WH (2) BK (4) BU (3) +VS ext. teach light/dark Z 0V mechanical data width / diameter 8 mm height / length 16,2 mm depth 10,8 mm type rectangular housing material plastic (PMMA, MABS, PA) front (optics) PMMA connection types flylead connector M8 4 pin, L=200 mm sensitivity adjustable: via Teach-in button or Teach-in wire input ambient conditions operating temperature -20 ... +50 °C protection class IP 65 FECK 07P6901/KS35A www.baumer.com 24/4/2015