Download Databrief

STEVAL-ISA122V1
Wide input-range, single-output 5 V / 11 W power supply
demonstration board based on the VIPer27
Data brief
Features
■
Wide input voltage range (VIN): 90 to 265 Vrms
■
Nameplate output voltage (Vout): 5 V
■
Max output current IOUT: 2.2 A
■
Precision of output regulation: ±5%
■
High frequency output voltage ripple
(ΔVout_HF): 50 mV
■
Max ambient operating temperature (TA):
60 °C
■
RoHS compliant
Description
The STEVAL-ISA122V1 demonstration board
meets the specifications of a wide range of
auxiliary power supplies for applications including
LCD or plasma TVs and desktop computers,
where the power supply that converts the energy
from the mains often includes two modules.
One module is the main power supply which
provides most of the power, and is off when the
application is shut down or in standby mode.
The other is the auxiliary power supply, which
only provides energy to specific parts of the
equipment such as the USB ports, remote
receivers, or modems, but stays on when the
application is in standby mode.
It is optimized for very low standby consumption,
which allows it to satisfy the most stringent
energy-saving requirements.
The VIPer27 has a switching frequency of 115
kHz, which helps to reduce the transformer size.
February 2013
Doc ID 024124 Rev 1
For further information contact your local STMicroelectronics sales office.
1/5
www.st.com
5
Schematic diagram
STEVAL-ISA122V1
1
Schematic diagram
Figure 1.
STEVAL-ISA122V1 circuit schematic
2/5
Doc ID 024124 Rev 1
STEVAL-ISA122V1
Revision history
2
Revision history
Table 1.
Document revision history
Date
Revision
11-Feb-2013
1
Changes
Initial release.
Doc ID 024124 Rev 1
3/5
STEVAL-ISA122V1
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2013 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
4/5
Doc ID 024124 Rev 1
STEVAL-ISA122V1
Doc ID 024124 Rev 1
5/5