Download

 Data sheet...
SAK terminal with screw connection
SAK 10
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
The Weidmüller SAK feed-through terminals satisfy the
requirements of IEC 60947-1 and are available with rated
cross-sections from 0.08 mm² to 240 mm².
General ordering data
Order No.
Type
Version
GTIN (EAN)
Qty.
0110060000
SAK 10
SAK terminal with screw connection, Feedthrough terminal, Rated cross-section: 10 mm²,
Screw connection, PA 66, beige
4008190027056
100 pc(s).
Creation date September 11, 2012 12:13:05 PM CEST
Catalogue status 23.07.2012 / We reserve the right to make technical changes.
1
Data sheet...
SAK terminal with screw connection
SAK 10
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Dimensions
Length
Height
Net weight
40 mm
49 mm
18.95 g
Width
Height of lowest version
-50 °C
Storage temperature
Continuous operating temp., max.
10 mm
51.5 mm
Temperatures
Operating temperature
Continuous operating temp., min.
100 °C
Rated data IECEx/ATEX
Certificate No. (ATEX)
ATEX certificate
IEC Ex certificate
Current (ATEX)
Max. voltage (IECEX)
Wire cross section max. (IECEX)
Operating temperature range
Marking ATEX Directive 94/9/EC
KEMA97ATEX1798U
KEMA97ATEX1798U_e.pdf IECEXKEM06.0014U_e.pdf 50 A
550 V
10 mm²
For operating temperature range see EC Design
Test Certificate / IEC ExCertificate of Conformity
II 2 G D
ATEX certificate
Certificate No. (IECEX)
Max. voltage (ATEX)
Wire cross section max. (ATEX)
Current (IECEX)
Voltage, cross-connection
Marking EN 60079-7
IECEXKEM06.0014U
IECEXKEM06.0014U
550 V
10 mm²
50 A
CrossConnectionGuide.pdf
Ex e II
Additional technical data
Explosion-tested version
Open sides
Version
No
right
Double terminal
Number of similar terminals
Type of mounting
1
Snap-on
154685-1501714
65 A
14 AWG
Voltage size C (CSA)
Wire cross section max. (CSA)
600 V
6 AWG
Conductor cross-section, flexible plus
plastic collar DIN 46228/1, further
connection, max.
CSA ratings data
Certificate No. (CSA)
Current size C (CSA)
Wire cross section min. (CSA)
Clampable wires (additional connection)
Conductor cross-section, flexible plus
plastic collar DIN 46228/1, further
connection, min.
1.5 mm²
10 mm²
Creation date September 11, 2012 12:13:05 PM CEST
Catalogue status 23.07.2012 / We reserve the right to make technical changes.
2
Data sheet...
SAK terminal with screw connection
SAK 10
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Clampable wires (rated connection)
Type of connection
Blade size
Number of connections
Clamping range, rated connection, max.
Tightening torque, min.
Gauge to IEC 60947-1
Screw connection
1.0 x 5.5 mm
2
16 mm²
2 Nm
B6
Wire connection cross section, solid
core max. rated connection
10 mm²
Wire connection cross section, stranded,
rated connection, max.
16 mm²
Wire connection cross-section, finely
stranded, min.
1.5 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, max.
10 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules and
plastic collars DIN 46228/4, rated
connection, max.
10 mm²
Twin wire-end ferrules, max.
6 mm²
Wire connection cross section AWG,
max.
AWG 6
Stripping length
12 mm
Connection direction
on side
Clamping range, rated connection, min. 1.5 mm²
Clamping screw
M4
Tightening torque, max.
2.4 Nm
Wire connection cross section, solid
core, max. rated connection
1.5 mm²
Wire connection cross section, stranded,
rated connection, min.
1.5 mm²
Wire connection cross section, finely
stranded, max.
16 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, min.
1.5 mm²
Cross-section for connected conductor,
finely stranded with wire-end ferrules
and plastic collars DIN 46228/4, rated
connection, min.
1.5 mm²
Twin wire-end ferrules, min.
0.75 mm²
Wire connection cross section AWG,
min.
Rated voltage
Rated current
Standards
Voltage size C (UR)
600 V
Conductor size Factory wiring max. (UR) 6 AWG
Conductor size Field wiring max. (UR) 6 AWG
PA 66
Beige
Material
UL 94 flammability rating
SAK terminal with screw
connection
on side
2
No
Yes
Type of connection
Number of levels
No. of clamping points per level
Mounting rail
AWG 14
Rated data
Rated cross-section
Rated impulse withstand voltage
Current at maximum wires
Pollution severity
10 mm²
8 kV
76 A
3
800 V
57 A
IEC 60947-7-1
UL ratings data
Certificate No. (UR)
E60693VOL1SEC14
Current size C (UR)
60 A
Conductor size Factory wiring min. (UR) 14 AWG
Material data
Insulating material
Colour
PA 66
V-2
System specifications
Product family
Connection direction
Number of connections
Levels cross-connected internally
End cover plate required
Screw connection
1
2
TS 32
Creation date September 11, 2012 12:13:05 PM CEST
Catalogue status 23.07.2012 / We reserve the right to make technical changes.
3
Data sheet...
SAK terminal with screw connection
SAK 10
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Classifications
ETIM 2.0
UNSPSC
eClass 5.1
eClass 7.0
EC000897
30-21-18-11
27-14-11-20
27-14-11-20
ETIM 3.0
eClass 4.1
eClass 6.0
EC000897
27-14-11-20
27-14-11-20
Product information
Descriptive text ordering data
Descriptive text technical data
A higher torque of 2 to 2.4 Nm is necessary when using H07V-R16 and AWG 6 conductors.
When used with twin ferrules ZH 0.5 - ZH 4, the rated voltage is 690 V.
Approvals
Approvals
Creation date September 11, 2012 12:13:05 PM CEST
Catalogue status 23.07.2012 / We reserve the right to make technical changes.
4