Download

 Data sheet...
SAK terminal with screw connection
SAKG 54 II
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
The Weidmüller SAKG range includes the following
connection types:
• Combined clamping yoke/flat-blade connection, version
I
• Flat spade connection, version II.
Here, two types of cable glands are intended:
a) screw set with lock nut
b) with threads on the busbar
clamping yoke connection, version III.
The stripped conductor can be connected without any
further preparation.
General ordering data
Order No.
Type
Version
GTIN (EAN)
Qty.
0170720000
SAKG 54 II
SAK terminal with screw connection, Special
terminal, Rated cross-section: 240 mm², Screw
connection, KrG, Medium yellow
4008190064044
5 pc(s).
Creation date September 11, 2012 12:14:44 PM CEST
Catalogue status 23.07.2012 / We reserve the right to make technical changes.
1
Data sheet...
SAK terminal with screw connection
SAKG 54 II
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Dimensions
Length
Height
Weight
122 mm
60.5 mm
591 g
Width
Height of lowest version
Net weight
54 mm
60.5 mm
580.4 g
-60 °C
Storage temperature
Continuous operating temp., max.
130 °C
No
Open
Stud terminal
Number of similar terminals
Type of mounting
1
Snap-on
12400-199
600 A
300 kcmil
Voltage size C (CSA)
Wire cross section max. (CSA)
600 V
500 kcmil
Connection direction
Clamping range, rated connection, min.
Clamping screw
Tightening torque, max.
Wire connection cross section AWG,
max.
on side
10 mm²
M 16
60 Nm
Rated voltage
Rated current
Standards
1,000 V
415 A
IEC 60947-7-1
Voltage size C (UR)
600 V
Conductor size Factory wiring max. (UR) 500 kcmil
Conductor size Field wiring max. (UR) 500 kcmil
Material
UL 94 flammability rating
Temperatures
Operating temperature
Continuous operating temp., min.
Additional technical data
Explosion-tested version
Open sides
Version
CSA ratings data
Certificate No. (CSA)
Current size C (CSA)
Wire cross section min. (CSA)
Clampable wires (rated connection)
Type of connection
Number of connections
Clamping range, rated connection, max.
Tightening torque, min.
Wire connection cross section AWG,
min.
Screw connection
1
240 mm²
25 Nm
kcmil 300
kcmil 500
Rated data
Rated cross-section
Rated impulse withstand voltage
Current at maximum wires
Pollution severity
240 mm²
8 kV
415 A
3
UL ratings data
Certificate No. (UR)
E60693VOL1SEC2
Current size C (UR)
380 A
Conductor size Factory wiring min. (UR) 300 kcmil
Material data
Insulating material
Colour
KrG
Beige
KrG
V-0
Creation date September 11, 2012 12:14:44 PM CEST
Catalogue status 23.07.2012 / We reserve the right to make technical changes.
2
Data sheet...
SAK terminal with screw connection
SAKG 54 II
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
System specifications
Product family
Connection direction
Number of connections
Levels cross-connected internally
End cover plate required
SAK terminal with screw
connection
on side
1
No
Yes
Type of connection
Number of levels
No. of clamping points per level
Mounting rail
EC000897
30-21-18-11
27-14-11-31
27-14-11-20
ETIM 3.0
eClass 4.1
eClass 6.0
Screw connection
1
2
TS 32
Classifications
ETIM 2.0
UNSPSC
eClass 5.1
eClass 7.0
EC000897
27-14-11-31
27-14-11-20
Product information
Descriptive text technical data
Conductor connection with cable lugs according to DIN 46234 and DIN 46235, from 70 .. 240 mm²
Approvals
Approvals
Downloads
STEP
0170720000_01122_SAKG_54_II_STP.stp
Creation date September 11, 2012 12:14:44 PM CEST
Catalogue status 23.07.2012 / We reserve the right to make technical changes.
3
Similar pages