Data sheet... SAK terminal with screw connection SAK 6N KRG Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com The Weidmüller SAK feed-through terminals satisfy the requirements of IEC 60947-1 and are available with rated cross-sections from 0.08 mm² to 240 mm². General ordering data Order No. Type Version GTIN (EAN) Qty. 0193220000 SAK 6N KRG SAK terminal with screw connection, Feedthrough terminal, Rated cross-section: 6 mm², Screw connection, KrG, Medium yellow 4008190098285 100 pc(s). Creation date September 11, 2012 12:11:33 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 1 Data sheet... SAK terminal with screw connection SAK 6N KRG Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions Length Height Net weight 40 mm 49 mm 17.57 g Width Height of lowest version -60 °C Storage temperature Continuous operating temp., max. 8 mm 51.5 mm Temperatures Operating temperature Continuous operating temp., min. 130 °C Rated data IECEx/ATEX Certificate No. (ATEX) ATEX certificate Current (ATEX) Voltage, cross-connection KEMA97ATEX1798U KEMA97ATEX1798U_e.pdf 36 A ATEX certificate Max. voltage (ATEX) Wire cross section max. (ATEX) Operating temperature range Marking EN 60079-7 CrossConnectionGuide.pdf Ex e II Marking ATEX Directive 94/9/EC KEMA97ATEX1798U_d.pdf 550 V 6 mm² For operating temperature range see EC Design Test Certificate / IEC ExCertificate of Conformity II 2 G D Additional technical data Explosion-tested version Open sides Version Yes right Double terminal Number of similar terminals Type of mounting 1 Snap-on 154685-1501714 47 A 20 AWG Voltage size C (CSA) Wire cross section max. (CSA) 600 V 8 AWG Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max. CSA ratings data Certificate No. (CSA) Current size C (CSA) Wire cross section min. (CSA) Clampable wires (additional connection) Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, min. 0.5 mm² 6 mm² Creation date September 11, 2012 12:11:33 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 2 Data sheet... SAK terminal with screw connection SAK 6N KRG Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Clampable wires (rated connection) Type of connection Screw connection Blade size 4.0 x 0.8 mm Number of connections 2 Clamping range, rated connection, max. 10 mm² Tightening torque, min. 0.8 Nm Torque level with DMS electric screwdriver 3 Wire connection cross section, solid core, max. rated connection 0.5 mm² Wire connection cross section, stranded, rated connection, min. 0.5 mm² Wire connection cross section, finely stranded, max. 10 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, min. 0.5 mm² Cross-section for connected conductor, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, min. 0.5 mm² Twin wire-end ferrules, min. 0.5 mm² Wire connection cross section AWG, min. AWG 22 Stripping length Connection direction Clamping range, rated connection, min. Clamping screw Tightening torque, max. Gauge to IEC 60947-1 12 mm on side 0.33 mm² M 3.5 1.6 Nm A5 Wire connection cross section, solid core max. rated connection 10 mm² Wire connection cross section, stranded, rated connection, max. 6 mm² Wire connection cross-section, finely stranded, min. 0.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, max. 6 mm² Wire connection cross-section, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, max. 6 mm² Twin wire-end ferrules, max. 4 mm² Rated voltage Rated current Standards 800 V 41 A IEC 60947-7-1 Voltage size C (UR) 600 V Conductor size Factory wiring max. (UR) 8 AWG Conductor size Field wiring max. (UR) 8 AWG KrG Medium yellow Material UL 94 flammability rating SAK terminal with screw connection on side 2 No Yes Type of connection Number of levels No. of clamping points per level Mounting rail Rated data Rated cross-section Rated impulse withstand voltage Current at maximum wires Pollution severity 6 mm² 8 kV 57 A 3 UL ratings data Certificate No. (UR) E60693VOL1SEC14 Current size C (UR) 40 A Conductor size Factory wiring min. (UR) 22 AWG Material data Insulating material Colour KrG V-0 System specifications Product family Connection direction Number of connections Levels cross-connected internally End cover plate required Screw connection 1 2 TS 32 Creation date September 11, 2012 12:11:33 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 3 Data sheet... SAK terminal with screw connection SAK 6N KRG Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Classifications ETIM 2.0 UNSPSC eClass 5.1 eClass 7.0 EC000897 30-21-18-11 27-14-11-20 27-14-11-20 ETIM 3.0 eClass 4.1 eClass 6.0 EC000897 27-14-11-20 27-14-11-20 Product information Descriptive text ordering data Descriptive text technical data With AWG 6 and H07V-R10 conductors, an increased MD torque of 1.4 to1.6 Nm should be used. When used with twin ferrules ZH 0.5 - ZH 4, the rated voltage is 690 V. Approvals Approvals Downloads STEP 0193220000_04476_SAK_6N_KRG_STP.stp Creation date September 11, 2012 12:11:33 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 4