Data sheet... SAK terminal with spring loaded terminals RSF 1 KRG Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com In order to do justice to the different requirements placed on our products, it is necessary to use various insulating materials tailored to the particular application. None of the insulating materials used by Weidmüller contain any hazardous substances. Above all, we ensure that all our materials are free from cadmium. Furthermore, they contain no colour pigments based on heavy metals and do not lead to the formation of dioxin/furan. General ordering data Order No. Type Version GTIN (EAN) Qty. 0270320000 RSF 1 KRG SAK terminal with spring loaded terminals, Feedthrough terminal, Rated cross-section: 10 mm², Screw connection, Direct mounting 4008190009922 50 pc(s). Creation date September 11, 2012 12:16:57 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 1 Data sheet... SAK terminal with spring loaded terminals RSF 1 KRG Technical data Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Dimensions Length Height Net weight 50 mm 60 mm 35.86 g Width Height of lowest version -60 °C Storage temperature Continuous operating temp., max. No 1 Snap-on Installation advice Open sides Direct mounting right 12400-351 300 V 50 A 5A 14 AWG Voltage size B (CSA) Voltage size D (CSA) Current size C (CSA) Wire cross section max. (CSA) 300 V 600 V 50 A 8 AWG Stripping length Connection direction Clamping range, rated connection, min. Clamping screw Tightening torque, max. Gauge to IEC 60947-1 15 mm on side 0.5 mm² M4 1.6 Nm 11 mm 60 mm Temperatures Operating temperature Continuous operating temp., min. 130 °C Additional technical data Explosion-tested version Number of similar terminals Type of mounting CSA ratings data Certificate No. (CSA) Voltage size C (CSA) Current size B (CSA) Current size D (CSA) Wire cross section min. (CSA) Clampable wires (rated connection) Type of connection Screw connection Blade size 1.0 x 5.5 mm Number of connections 2 Clamping range, rated connection, max. 10 mm² Tightening torque, min. 1.2 Nm Torque level with DMS electric screwdriver 4 Wire connection cross section, solid core, max. rated connection 0.5 mm² Wire connection cross section, stranded, rated connection, min. 0.5 mm² Wire connection cross section, finely stranded, max. 4 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, min. 0.5 mm² A5 Wire connection cross section, solid core max. rated connection 10 mm² Wire connection cross section, stranded, rated connection, max. 10 mm² Wire connection cross-section, finely stranded, min. 1.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, max. 6 mm² Rated data Rated cross-section Rated impulse withstand voltage Current at maximum wires Pollution severity 10 mm² 6 kV 57 A 3 Rated voltage Rated current Standards 500 V 57 A IEC 60947-7-1 E60693VOL1SEC3 600 V 40 A 14 AWG Voltage size B (UR) Current size B (UR) Wire cross section max. (UR) 600 V 40 A 8 AWG UL ratings data Certificate No. (UR) Voltage size C (UR) Current size C (UR) Wire cross section min. (UR) Creation date September 11, 2012 12:16:57 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 2 Data sheet... SAK terminal with spring loaded terminals RSF 1 KRG Technical data Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Material data Material UL 94 flammability rating KrG V-0 Colour SAK terminal with spring loaded terminals on side 2 No Type of connection Number of levels No. of clamping points per level End cover plate required EC000897 30-21-18-11 27-14-11-20 27-14-11-20 ETIM 3.0 eClass 4.1 eClass 6.0 Medium yellow System specifications Product family Connection direction Number of connections Levels cross-connected internally Screw connection 1 2 Yes Classifications ETIM 2.0 UNSPSC eClass 5.1 eClass 7.0 EC000897 27-14-11-20 27-14-11-20 Product information Descriptive text technical data When used with an AWG 8/7 conductor, the tightening torque is 1.6 Nm. Approvals Approvals Creation date September 11, 2012 12:16:57 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 3