Data sheet... SAK terminal with screw connection SAKC 10 2STB Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Disconnect terminals enable circuits to be quickly and safely isolated, e.g. in order to carry out maintenance or repair work. Disconnect terminals are available in two versions: • Double disconnect terminal with rated cross-section of 1.5 mm² for circuits on the upper and/or lower levels • Disconnect terminals with a profile identical with the W-Series terminals with rated cross-sections of 2 mm² and 4 mm² General ordering data Order No. Type Version GTIN (EAN) Qty. 0324120000 SAKC 10 2STB SAK terminal with screw connection, Disconnect and modular disconnect terminal, Rated crosssection: 10 mm², Screw connection, KrG, Medium yellow, Direct mounting 4008190049959 50 pc(s). Creation date September 11, 2012 12:28:31 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 1 Data sheet... SAK terminal with screw connection SAKC 10 2STB Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions Length Height Net weight 65 mm 52.5 mm 49.74 g Width Height of lowest version -60 °C Storage temperature Continuous operating temp., max. 130 °C No right Installation advice Type of mounting Direct mounting Snap-on 12400-186 600 V 5A 20 AWG Voltage size C (CSA) Current size C (CSA) Wire cross section max. (CSA) 600 V 25 A 10 AWG Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max. 12 mm 52.5 mm Temperatures Operating temperature Continuous operating temp., min. Additional technical data Explosion-tested version Open sides CSA ratings data Certificate No. (CSA) Voltage size D (CSA) Current size D (CSA) Wire cross section min. (CSA) Clampable wires (additional connection) Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, min. 0.5 mm² 10 mm² Clampable wires (rated connection) Type of connection Screw connection Blade size 1.0 x 5.5 mm Number of connections 2 Clamping range, rated connection, max. 10 mm² Tightening torque, min. 1.2 Nm Torque level with DMS electric screwdriver 4 Wire connection cross section, solid core, max. rated connection 0.5 mm² Wire connection cross section, stranded, rated connection, min. 1.5 mm² Wire connection cross section, finely stranded, max. 10 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, min. 0.5 mm² Cross-section for connected conductor, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, min. 10 mm² Wire connection cross section AWG, min. AWG 22 Stripping length Connection direction Clamping range, rated connection, min. Clamping screw Tightening torque, max. Gauge to IEC 60947-1 12 mm on side 0.33 mm² M4 2.4 Nm B6 Wire connection cross section, solid core max. rated connection 10 mm² Wire connection cross section, stranded, rated connection, max. 10 mm² Wire connection cross-section, finely stranded, min. 0.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, max. 10 mm² Wire connection cross-section, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, max. 10 mm² Wire connection cross section AWG, max. AWG 8 Creation date September 11, 2012 12:28:31 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 2 Data sheet... SAK terminal with screw connection SAKC 10 2STB Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Disconnect terminals Cross-disconnect Slitting Tightening torque, min. Integral test socket Tightening torque, max. Torque level with DMS electric screwdriver Yes 2.4 Nm Rated voltage Rated current Standards 500 V 26 A IEC 60947-7-1 Voltage size C (UR) 600 V Conductor size Factory wiring max. (UR) 8 AWG Conductor size Field wiring max. (UR) 8 AWG KrG Medium yellow Material UL 94 flammability rating SAK terminal with screw connection on side 2 No Type of connection Number of levels No. of clamping points per level End cover plate required EC000902 30-21-18-11 27-14-11-26 27-14-11-20 ETIM 3.0 eClass 4.1 eClass 6.0 without pluggable 1.2 Nm 4 Rated data Rated cross-section Rated impulse withstand voltage Current at maximum wires Pollution severity 10 mm² 6 kV 27 A 3 UL ratings data Certificate No. (UR) E60693VOL1SEC7 Current size C (UR) 25 A Conductor size Factory wiring min. (UR) 26 AWG Material data Insulating material Colour KrG V-0 System specifications Product family Connection direction Number of connections Levels cross-connected internally Screw connection 1 2 Yes Classifications ETIM 2.0 UNSPSC eClass 5.1 eClass 7.0 EC000902 27-14-11-26 27-14-11-20 Product information Descriptive text ordering data Descriptive text technical data Descriptive text accessories Version with socket (right), Art.no.: 0324020000 SAKC 10 STB/RE Tightening torque for socket is 1.2 Nm. Tightening torque is 2 Nm when connecting 10-mm² stranded conductor Pull out force look under Accessories. Approvals Approvals Creation date September 11, 2012 12:28:31 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 3