Previous Datasheet Index Next Data Sheet Bulletin I2096/A SD700C..L SERIES Hockey Puk Version STANDARD RECOVERY DIODES Features 700A Wide current range High voltage ratings up to 4500V High surge current capabilities Diffused junction Hockey Puk version Case style DO-200AB (B-PUK) Typical Applications Converters Power supplies High power drives Auxiliary system supplies for traction applications Major Ratings and Characteristics Parameters SD700C..L Units 700 A 55 °C 1310 A 25 °C @ 50Hz 7500 A @ 60Hz 7850 A @ 50Hz 281 KA2s @ 60Hz 257 KA2s 3000 to 4500 V - 40 to 150 °C IF(AV) @ Ths IF(RMS) @ Ths IFSM I2t VRRM range TJ To Order case style DO-200AB (B-PUK) Previous Datasheet SD700C..L Series Index Next Data Sheet ELECTRICAL SPECIFICATIONS Voltage Ratings Voltage VRRM , maximum repetitive VRSM , maximum non- IRRM max. Code peak reverse voltage V repetitive peak rev. voltage V @ TJ = TJ max. 30 3000 3100 36 3600 3700 40 4000 4100 45 4500 4600 Type number SD700C..L mA 50 Forward Conduction Parameter SD700C..L Units 700 (345) A 180° conduction, half sine wave 55 (85) °C Double side (single side) cooled I F(RMS) Max. RMS forward current 1310 A @ 25°C heatsink temperature double side cooled I FSM Max. peak, one-cycle forward, 7500 non-repetitive surge current 7850 I F(AV) Max. average forward current @ Heatsink temperature t = 10ms No voltage t = 8.3ms reapplied t = 10ms 50% VRRM 6600 t = 8.3ms reapplied Sinusoidal halfwave, 281 t = 10ms No voltage Initial TJ = TJ max. t = 8.3ms reapplied 199 t = 10ms 50% VRRM 182 t = 8.3ms reapplied 6310 2 I t 2 Maximum I t for fusing 257 I 2 √t Maximum I2√t for fusing V F(TO)1 Low level value of threshold voltage V F(TO)2 High level value of threshold 2810 A KA2s KA2√s Low level value of forward V 0.99 (I > π x IF(AV)),TJ = TJ max. 0.78 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max. slope resistance rf2 High level value of forward mΩ (I > π x IF(AV)),TJ = TJ max. 0.73 slope resistance V FM Max. forward voltage drop t = 0.1 to 10ms, no voltage reapplied (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max. 0.88 voltage rf1 Conditions 1.66 V To Order Ipk= 1000A, TJ = TJ max, tp = 10ms sinusoidal wave Previous Datasheet Index Next SD700C..L Data SheetSeries Fig. 3 - Current Ratings Characteristics Fig. 4 - Current Ratings Characteristics Fig. 5 - Forward Power Loss Characteristics Fig. 6 - Forward Power Loss Characteristics Fig. 7 - Maximum Non-Repetitive Surge Current To Order Fig. 8 - Maximum Non-Repetitive Surge Current Previous Datasheet SD700C..L Series Index Fig. 9 - Forward Voltage Drop Characteristics Fig. 10 - Thermal Impedance ZthJ-hs Characteristics To Order Next Data Sheet Previous Datasheet Index NextSD700C..L Data Sheet Series Thermal and Mechanical Specifications Parameter SD700C..L TJ Max. junction operating temperature range -40 to 150 Tstg Max. storage temperature range -55 to 200 RthJ-hs Max. thermal resistance, junction F wt Units °C 0.11 K/W to heatsink 0.05 Mounting force, ± 10% 9800 N (1000) (Kg) 250 g Approximate weight Case style Conditions DO-200AB(B-PUK) DC operation single side cooled DC operation double side cooled See Outline Table ∆RthJ-hs Conduction (The following table shows the increment of thermal resistence RthJ-hs when devices operate at different conduction angles than DC) Conduction angle Sinusoidal conduction Rectangular conduction Single Side Double Side Units Conditions K/W TJ = TJ max. Single Side Double Side 180° 0.011 0.011 0.008 0.008 120° 0.014 0.015 0.014 0.014 90° 0.018 0.018 0.019 0.019 60° 0.026 0.026 0.027 0.028 30° 0.045 0.046 0.046 0.046 Ordering Information Table Device Code SD 70 0 C 45 L 1 2 3 4 5 6 1 - Diode 2 3 - Essential part number 0 = Standard recovery 4 5 - C = Ceramic Puk Voltage code: code x 100 = VRRM (see Voltage Ratings Table) 6 - L = Puk Case DO-200AB (B-PUK) To Order Previous Datasheet SD700C..L Series Index Next Data Sheet Outline Table BOTH ENDS 5 8 .5 (2.3 0) D IA . M AX . 3.5(0.14) DIA. NOM. x 1.8(0.07) DEEP MIN. Case Style DO-200AB (B-PUK) All dimensions in millimeters (inches) TWO PLACES 25 .4 (1 ) 2 6.9 ( 1.06 ) 0.8 (0.03) BOTH ENDS 34 (1.34) DIA. MAX. 53 (2.09) DIA. MAX. Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics To Order