Download

Cable lugs and tools
Addition catalogue 2015/2016
Let’s connect.
Connectivity and electrical installation
Cable lugs and tools
Contents
Cable lugs and tools
Addition catalogue 6a
A
Cable lugs and insulated connectors
B
Crimping tools
Appendix
1541050000 – 2015/2016
Index
X
Search according to type or order number
I
II
1541050000 – 2015/2016
Cable lugs and insulated connectors
Contents
Cable lugs and insulated connectors
Cable lugs and insulated connectors
1541050000 – 2015/2016
Technical data / general notes
A.2
Tubular cable lugs, copper, euro-series
A.5
Tubular cable lugs with angle, copper, euro-series
A.8
Joint connector, copper, euro-series
A.11
Crimp cable lugs, copper, DIN 46235
A.13
Tubular compression connectors, copper, DIN 46267 part 1
A.15
Terminals ring and fork-type, noninsulated
A.17
Pin cable lugs DIN 46230, noninsulated
A.20
Parallel connectors and joint connector, noninsulated
A.21
Terminals ring type
A.23
Terminals fork type
A.24
Pin cable lugs / joint connector
A.25
Parallel connectors / closed end connectors
A.26
Cable-lug sleeves
A.27
Cable lug connector / piggy back disconnectors
A.28
Flag female disconnectors / circular plug
A.29
Round-plug sleeves
A.30
Hook-type cable lug
A.31
A
A.1
Cable lugs and insulated connectors
Technical data / general notes
A
Cable lugs and insulated connector
Technical data / general information
Temperature resistance
Copper-cable lugs and -connectors without insulation
Copper-cable lugs and -connectors with pa-insulation
Copper-cable lugs and -connectors with PC-insulation
Butt-connectors with shrink insulation
Terminals with PVC (polyvinyl chloride) insulation
Terminals with PC (polycarbonate=makrolon) insulation
Terminals with PA (polyamide)-insulation
Brass terminals, tin plated, without insulation
Conductor cross section comparison
up to max. 120°C
(according to DIN 46 234)
–55 °C to +120 °C
–40 °C to +120 °C
–10 °C to +105 °C
–10 °C to +70 °C
–40 °C to +100 °C
–55 °C to +100 °C
–55 °C to +100 °C
Silicone and halogen concentration of insulated
connecting material
The following chart shows the concentration of silicone and
halogen of insulated connection material delivered by us:
Article description
Terminals, ring type
Terminals, fork type
Pin cable lugs
Joint connector
Parallel-connectors
Joint connector heat shrink insulation
Closed end connectors
Cable-lug sleeves and cable-lug sleeves PVC - insulated
Cable-lug sleeves and cable-lug sleeves PC - insulated
Cable-lug sleeves tin-bronze PA - insulated
Cable-lug sleeves , fully insulated
Piggy back disconnectors PVC - insulated
Piggy back disconnectors PC - insulated
Flag female disconnectors
Round-plug sleeves PVC - insulated
Circular plug PVC - insulated
Circular plug PC - insulated
Round-plug sleeves and circular plug, fully insulated
A.2
free of silicone
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
free of halogen
yes
yes
yes
yes
yes
yes
yes
no
yes
yes
yes
no
yes
yes
no
no
yes
yes
AWG/ MCM
comparable ISO-cross section in
(mm²)
AWG
cross section (mm²)
0.14
0.2
0.34
0.5
0.75
1
1.5
2.5
4
6
10
16
25
35
–
50
70
95
–
120
150
185
240
300
26
24
22
20
18
–
16
14
12
10
8
6
4
2
1
0
00
000
0000
250 MCM
300 MCM
350 MCM
500 MCM
600 MCM
0.128
0.205
0.325
0.519
0.823
–
1.31
2.08
3.31
5.27
8.35
13.3
21.2
33.6
42.4
53.4
67.5
85.0
107.2
127
152
177
253
304
Colour of insulation
cross section mm2
colour
0.1 – 0.5
0.5 – 1
1.5 – 2.5
4–6
10
16
25
35
50
70
95
120
150
yellow
red
blue
yellow
red
blue
yellow
red
blue
yellow
red
blue
yellow
1541050000 – 2015/2016
Cable lugs and insulated connectors
Technical data / general notes
A
Electrical characteristics
Maximum allowable current load of cable lugs and connectors
in conjunction with insulated conductors (at ambient temperature +30 °C)
nominal cross section
(mm²)
0.75
1
1.5
2.5
4
6
10
16
25
35
50
70
95
120
150
185
240
300
sources of current ratings:
Single cor cable
– rubber insulated
– PVC insulated
– TPE insulated
– heat resistant
Multicore cables + cords, excl.
home- and portable apparatus
– rubber insulated
– PVC insulated
– TPE insulated
– heat resistant
Multicore
heavy duty rubber cables
min. 0.6 / 1kV
Cu
(A)
Cu
(A)
Cu
(A)
15
19
24
32
42
54
73
98
129
158
198
245
292
344
391
448
528
608
DIN VDE 0298-4. 2003-08
Table 11, columne 2
12
15
18
26
34
44
61
82
108
135
168
207
250
292
335
382
453
523
DIN VDE 0298-4. 2003-08
Table 11, columne 5
–
–
23
30
41
53
74
99
131
162
202
250
301
–
–
–
–
–
DIN VDE 0298-4. 2003-08
Table 15, columne 4+2
Note:
Design of these tables deviates from VDE 0298-4 design.
In case of doubt, appliance of the current issue of the DIN VDE 0298-4 is obligatory.
Above Table values have to be taken into consideration of further applicable converting / derating factors:
–other ambient temperatures: DIN VDE 0298-4
–pay attention to the maximum electric current of the used equipment
–pay attention to the maximum current load of the used cable under consideration of the laying procedure
1541050000 – 2015/2016
A.3
Cable lugs and insulated connectors
Introduction
Tubular cable lugs and connectors, copper
euro-series
A
A.4
1541050000 – 2015/2016
D
O
Tubular cable lugs 0.5 – 25 mm2,
euro-series
Cu according to DIN EN 13600
tin plated
Cross-section
mm2
0.5 – 0.75
d1
1.4
d3
3
dimensions in mm
d2
b
I
3.2
6.5
12.5
4.3
8.5
14
5.3
10
15
a
6
Qty.
(pcs.)
100
100
100
Order No.
1495010000*
1495020000*
1495030000*
3.9
3.2
4.3
5.3
6.4
6.5
8.5
10
11
14
15
16
18
6
100
100
100
100
1495040000*
1495050000*
1495070000*
1495080000*
2.5
4
5
6
8
2.4
4.4
4.3
5.3
6.4
8.4
8.5
10
11
13
15
16
18
20
6.5
100
100
100
100
1495090000*
1495100000*
1495110000*
1495120000*
4
4
5
6
8
3
5
4.3
5.3
6.4
8.4
8.5
10
11
14
17
18
20
22
8
100
100
100
100
1495130000*
1495140000*
1495150000*
1495170000*
6
4
5
6
8
10
12
3.5
6.5
4.3
5.3
6.4
8.4
10.5
13
10
10
11
15
18
19
19
20
21.5
24
26
27.5
9
100
100
100
100
100
100
1497150000
1497170000
1497180000
1497190000
1497200000
1497210000
10
4
5
6
8
10
12
4.5
7
4.3
5.3
6.4
8.4
10.5
13
12
12
12
15
18
20
20
21
22.5
25
27
28.5
10
100
100
100
100
100
100
1496900000
1496910000
1496920000
1496930000
1496940000
1496950000
16
5
6
8
10
12
5.5
8.5
5.3
6.4
8.4
10.5
13
12
12
15
18
19
25
26.5
29
31
32
100
100
100
100
100
1496970000
1496980000
1496990000
1497000000
1497010000
25
5
6
8
10
12
14
7
10
5.3
6.4
8.4
10.5
13
15
15
15
16
18
20
22
33.5
31.5
33
34.5
36
39
100
100
100
100
100
100
1495830000
1496490000
1496500000
1496510000
1496520000
1496530000
* UL not tested
15
PZ RK 10/120
1.9
A
EPG 45
3
4
5
6
Tool
recommendation
PZ RK 6/70
1.0 – 1.5
E354986
1541050000 – 2015/2016
flat hole
M
3
4
5
HTN 21
Technical data
Material:
Surface:
Approvals:
Ordering data
Cable lugs and insulated connectors
E
G
G
G
Tubular cable lugs, copper, euro-series
A.5
Tubular cable lugs 35 – 300 mm2,
euro-series
d3
12
dimensions in mm
d2
b
I
6.4
17
33
8.4
17
34
10.5 20
36.5
13
22
37.5
a
17
G
G
weight
100 pcs./kg
2.07
2.18
2.19
2.33
Qty
(pcs.)
100
100
100
100
Order No.
1496540000
1496550000
1496570000
1496580000
6
8
10
12
14
16
20
10
14
6.4
8.4
10.5
13
15
17
21
20
20
20
23
23
27
30.5
37
39
40.5
42
44
46
52.5
19
3.01
3.04
3.13
3.13
3.51
3.55
3.89
100
100
100
100
100
100
100
1496590000
1496600000
1496610000
1496620000
1495750000
1496630000
1495840000
70
6
8
10
12
14
16
20
12
16.5
6.4
8.4
10.5
13
15
17
21
24
24
24
24
25
28
29
40.5
42.5
43.5
45
46
48.5
52
21
4.11
4.46
4.64
4.73
4.91
4.96
5.29
25
25
25
25
25
25
25
1496640000
1496650000
1496670000
1495570000
1495770000
1495580000
1495590000
95
6
8
10
12
14
16
20
13.5
18
6.4
8.4
10.5
13
15
17
21
26
26
26
26
26
28
30
43
46
47
48
51.5
51
55
23
4.95
5.36
5.51
5.51
5.89
5.85
6.13
25
25
25
25
25
25
25
1495820000
1495600000
1495610000
1495620000
1495780000
1495630000
1495640000
120
8
10
12
14
16
20
15
20
8.4
10.5
13
15
17
21
29
29
29
30
30
35
49.5
52
51.5
53
55
60
26
6.88
7.99
7.84
7.86
8.07
8.90
25
25
25
25
25
25
1495790000
1495650000
1495670000
1495800000
1495680000
1495690000
150
8
10
12
14
16
20
16.8
21.3
8.4
10.5
13
15
17
21
31
31
31
31
31
35
55.5
56.5
56
57
58
63
29
7.89
8.37
8.07
8.30
8.36
8.75
25
25
25
25
25
25
1495700000
1495710000
1495720000
1495810000
1495730000
1495740000
185
8
10
12
14
16
20
19
24
8.4
10.5
13
15
17
21
35
35
35
35
35
35
58
59
58.5
61
63
66
30
10.37
10.61
10.60
10.72
10.86
11.33
25
25
25
25
25
25
1497290000*
1495430000
1495440000
1497250000
1495450000
1495470000
240
8
10
12
14
16
20
21
26
8.4
10.5
13
15
17
21
38
38
38
38
38
38
67
67
67
69
69.5
71
35
12.40
12.97
13.02
13.36
13.56
13.80
25
25
25
25
25
25
1495480000*
1495490000
1495500000
1497270000
1495510000
1495520000
300
10
12
14
16
20
24
30
10.5
13
15
17
21
44
44
44
44
44
79.5
82
84
85
85
42
20.45
21.18
22.19
21.94
22.40
20
20
20
20
20
1495530000*
1495540000
1497280000
1495550000
1497240000
* UL not tested
Tool
recommendation
APG 80 + HPG 80. EPG 45
d1
8.5
50
E354986
A.6
flat hole
M
6
8
10
12
APG 55 + HPG 55
Cross section
mm2
35
EPG 45
Cu according to DIN EN 13600
tin plated
Ordering data
PZ PK 10/120 + PZ RK 10/120
Technical data
Material:
Surface:
Approvals:
O
D
PZ PK 6/70 + PZ RK 6/70
A
E
G
Cable lugs and insulated connectors
Tubular cable lugs, copper, euro-series
1541050000 – 2015/2016
Tubular cable lugs 35 – 300 mm2,
euro-series, with narrow flange
dimensions in mm
d3
d2
b
I
12
6.4 15
33
8.4 15
35
a
17
14
37
39
41
19
2.69
2.79
2.99
25
25
25
1494820000
1494830000
1494840000
6.4 15
8.4 17
10.5 17
weight
100 pcs./kg
1.93
1.90
Qty.
(pcs.)
25
25
Order No.
1494790000
1494810000*
6
8
10
10
70
6
8
10
12
11.8 16.5 6.4
8.4
10.5
13
17
17
17
19
41
43
45
46
21
3.99
4.38
4.40
4.48
25
25
25
25
1494850000
1494860000
1494870000
1494880000
95
6
8
10
12
13.5 18
6.4
8.4
10.5
13
19
19
19
19
43
45
47
48
23
4.67
4.90
5.10
5.20
25
25
25
25
1494430000
1494890000
1494900000
1494910000
120
6
8
10
12
14.7 20
6.4
8.4
10.5
13
20
20
20
20
49
51
53
54
26
6.43
7.12
6.70
7.12
10
10
10
10
1494410000
1494420000
1494920000
1494930000
150
6
8
10
12
16.3 21.3 6.4
8.4
10.5
13
19
19
19
22
53
55
56
59
29
7.01
7.31
7.63
7.63
10
10
10
10
1494440000
1494940000
1494950000
1494970000
185
10
12
16
18.7 24
10.5 26
13
26
17
26
60
30
59.5
64
10.47
10.27
10.81
10
10
10
1494980000
1494990000
1495000000
240
10
12
16
21
26
10.5 30
13
30
17
30
65
65
68
35
12.80
11.71
12.11
5
5
5
1494340000
1494350000
1494370000
300
10
12
16
23.5 30
10.5 30
13
30
17
30
76
79
81
42
19.66
20.08
20.60
5
5
5
1494380000*
1494390000*
1494400000*
Tool
recommendation
A
APG 80 + HPG 80. EPG 45
d1
8.5
50
* UL not tested
1541050000 – 2015/2016
flat hole
M
6
8
APG 55 + HPG 55
Cross section
mm2
35
EPG 45
E354986
Ordering data
PZ PK 10/120 + PZ RK 10/120
Cu according to DIN EN 13600
tin plated
O
PZ PK 6/70 + PZ RK 6/70
Technical data
Material:
Surface:
Approvals:
D
Cable lugs and insulated connectors
E
G
G
G
Tubular cable lugs, copper, euro-series
A.7
G
G
Tubular cable lugs with 90° angle,
0.5 – 35 mm2, euro-series
Technical data
Material:
Surface:
Approvals:
Cu according to DIN EN 13600
tin plated
D
Ordering data
Cross-section
mm2
0.5 – 0.75
d1
1.4
dimensions in mm
d3
d2
b
I
3
3.2 6.5 7.5
4.3 8.5 8.5
5.3 10
9.5
weight
100 pcs./kg
0.09
0.10
0.10
Qty.
(pcs.)
100
100
100
Order No.
1495180000*
1495190000*
1495200000*
0.18
0.18
0.22
0.23
100
100
100
100
1495250000*
1495270000*
1495280000*
1495290000*
8.5
10
11
14
9.5 7
10.5
12.5
14.5
0.25
0.24
0.29
0.30
100
100
100
100
1495300000*
1495310000*
1495320000*
1495330000*
4.3
5.3
6.4
8.4
10.5
13
10
11
11
15
18
20
10.3 8
11.2
13.3
15.3
17.2
18.2
0.52
0.56
0.62
0.64
0.68
0.66
100
100
100
100
100
100
1497220000
1496120000
1496130000
1496140000
1496150000
1496170000
7
5.3
6.4
8.4
10.5
13
12
12
15
18
20
11.5 9
12.5
15.5
17.5
18.5
0.54
0.59
0.67
0.70
0.70
100
100
100
100
100
1497020000
1497030000
1497040000
1497050000
1497070000
5.5
8.5
5.3
6.4
8.4
10.5
13
12
12
15
18
20
13
12
14.3
16.3
18.3
19.3
1.07
1.15
1.20
1.23
1.23
100
100
100
100
100
1497080000
1497090000
1497100000
1497110000
1497120000
6
8
10
12
14
7
10
6.4
8.4
10.5
13
15
15
16
18
20
22
15.5 14
17.5
19.5
20.5
22.5
1.35
1.43
1.57
1.51
1.69
100
100
100
100
100
1495850000
1495870000
1495880000
1495890000
1495900000
6
8
10
12
14
16
8.5
12
6.4
8.4
10.5
13
15
17
17
17
20
22
23
28
16.5 16
18.5
20.5
21.5
23.5
24.5
2.10
2.31
2.36
2.37
2.48
2.48
100
100
100
100
100
100
1495910000
1495920000
1495930000
1495940000
1494640000
1494690000
3.2
4.3
5.3
6.4
6.5
8.5
10
11
8
9
10
12
2.5
4
5
6
8
2.4
4.4
4.3
5.3
6.4
8.4
8.5
10
11
14
4
4
5
6
8
3
5
4.3
5.3
6.4
8.4
6
4
5
6
8
10
12
3.5
6.5
10
5
6
8
10
12
4.5
16
5
6
8
10
12
25
35
5
PZ RK 10/120
9.2 5.5
10.2
12.2
14.2
3.9
EPG 45
1495210000*
1495220000*
1495230000*
1495240000*
1.9
Tool
recommendation
PZ RK 6/70
100
100
100
100
3
4
5
6
* UL not tested
a
5
0.16
0.16
0.16
0.15
1.0 – 1.5
E354986
A.8
flat hole
M
3
4
5
HTN 21
A
E
G
O
Cable lugs and insulated connectors
Tubular cable lugs with angle, copper, euro-series
1541050000 – 2015/2016
G
G
O
E
G
Tubular cable lugs with 90° angle,
50 – 300 mm2, euro-series
weight
100 pcs./kg
3.00
3.22
3.32
3.28
3.37
3.63
3.89
Qty.
(pcs.)
100
100
100
100
100
100
100
Order No.
1495950000
1495970000
1495980000
1495990000
1494650000
1496000000
1494710000
24
24
24
24
25
28
29
18.8 20
20.8
22.8
23.8
25.8
26.8
30.8
4.41
4.86
5.06
4.94
5.19
5.11
5.26
25
25
25
25
25
25
25
1496010000
1496020000
1496030000
1496040000
1494660000
1496050000
1496070000
8.4
10.5
13
15
17
26
26
26
26
28
21.5 22
23.5
24.5
26.5
27.5
5.33
5.59
5.66
5.89
6.00
25
25
25
25
25
1496080000
1496090000
1496100000
1494670000
1496110000
8.4
10.5
13
17
29
29
29
30
22.5 25
24.5
25.5
28.5
7.63
8.07
7.99
8.46
25
25
25
25
1494680000
1494450000
1494470000
1494480000
8
10
12
16
20
16.8 21.3 8.4
10.5
13
17
21
31
31
31
31
35
25.7 28
25.7
26.7
29.7
33.7
8.03
8.07
8.29
8.50
8.89
25
25
25
25
25
1494490000
1494500000
1494510000
1494520000
1494530000
185
10
12
16
20
19
24
10.5
13
17
21
35
35
35
35
27
28
31
35
29
11.41
12.04
12.48
12.70
25
25
25
25
1494540000
1494550000
1494570000
1494580000
240
10
12
16
20
21
26
10.5
13
17
21
38
38
38
38
28
29
32
36
34
13.32
13.40
13.76
14.23
25
25
25
25
1494590000
1494610000
1494620000
1494630000
300
12
16
20
24
30
13
17
21
43
43
43
31
34
38
41
19.92
20.90
21.81
20
20
20
1497300000
1497310000
1497320000
6
8
10
12
14
16
20
12
16.5 6.4
8.4
10.5
13
15
17
21
95
8
10
12
14
16
13.5 18
120
8
10
12
16
15
150
20
Tool
recommendation
A
APG 80 + HPG 80, EPG 45
dimensions in mm
d3
d2
b
I
a
14
6.4 20
17.5 18
8.4 20
19.5
10.5 20
21.5
13
23
22.5
15
23
24.5
17
27
28.5
21
30
32.5
70
* UL not tested
1541050000 – 2015/2016
d1
10
APG 55 + HPG 55
E354986
flat hole
M
6
8
10
12
14
16
20
EPG 45
Cross-section
mm2
50
PZ PK 10/120 + PZ RK 10/120
Cu according to DIN EN 13600
tin plated
Ordering data
PZ PK 6/70 + PZ RK 6/70
Technical data
Material:
Surface:
Approvals:
D
Cable lugs and insulated connectors
Tubular cable lugs with angle, copper, euro-series
A.9
D
Tubular cable lugs with 45° angle,
10 – 240 mm2, euro-series
d1
4.5
dimensions in mm
d3
d2
b
7
5.3 12
6.4 12
8.4 15
10.5 18
a
9
weight
100 pcs./kg
0.55
0.58
0.65
0.66
Qty.
(pcs.)
100
100
100
100
Order No.
1496810000
1496820000
1496830000
1496840000*
16
5
6
8
10
5.5
8.5
5.3
6.4
8.4
10.5
12
12
15
18
12
0.95
1.02
1.17
1.17
100
100
100
100
1496850000
1496870000
1496880000
1496890000
25
6
8
10
12
7
10
6.4
8.4
10.5
13
15
16
18
20
14
1.39
1.51
1.66
1.70
100
100
100
100
1496180000
1496190000
1496200000
1496210000
35
6
8
10
12
8.5
12
6.4
8.4
10.5
13
17
17
20
22
16
2.17
2.23
2.34
2.40
50
50
50
50
1496220000
1496230000
1496240000
1496250000
50
6
8
10
12
10
14
6.4
8.4
10.5
13
20
20
20
23
18
2.94
3.34
3.65
3.65
50
50
50
50
1496270000*
1496280000
1496290000
1496300000
70
8
10
12
12
16.5 8.4 24
10.5 24
13
24
20
4.90
5.23
5.34
25
25
25
1496310000
1496320000
1496330000
95
8
10
12
16
13.5 18
8.4
10.5
13
17
26
26
26
28
22
6.18
6.20
6.20
6.80
25
25
25
25
1496340000
1496350000
1496370000
1496380000*
120
8
10
12
16
15
8.4
10.5
13
17
29
29
29
30
25
7.80
8.90
8.91
9.31
25
25
25
25
1496390000
1496400000
1496410000
1496420000
150
8
10
12
16
20
16.8 21.3 8.4
10.5
13
17
21
31
31
31
31
35
28
11.31
9.80
9.68
10.12
10.12
25
25
25
25
25
1496430000*
1496440000
1496450000
1496470000
1496480000*
185
10
12
16
20
19
24
10.5
13
17
21
35
35
35
35
29
12.35
12.24
12.84
13.99
20
20
20
20
1495340000
1495350000
1495370000
1495380000
240
12
16
20
21
26
13
17
21
38
38
38
34
15.46
16.51
17.04
15
15
15
1495400000
1495410000
1495420000
* UL not tested
A.10
flat hole
M
5
6
8
10
20
Tool
recommendation
MTR 160 + MTR 300. APG55 + HPG 55. APG 80 + HPG 80
E354986
Cross-section
mm2
10
EPG 45
Cu according to DIN EN 13600
tin plated
Ordering data
PZ PK 10/120 + PZ RK 10/120. MTR 110
Technical data
Material:
Surface:
Approvals:
G
ƒ
PZ PK 6/70 + PZ RK 6/70
A
E
G
G
Cable lugs and insulated connectors
Tubular cable lugs with angle, copper, euro-series
1541050000 – 2015/2016
G
G
Cable lugs and insulated connectors
Joint connector, copper, euro-series
O
Joint connector 0.5 – 240 mm2
euro-series
Cu according to DIN EN 13600
tin plated
with wirestop
dimensions in mm
d3
l
3
15
weight
100 pcs./kg
0.08
Qty.
(pcs.)
100
Order No.
0.12
100
1497340000
2.5
2.4
4.4
16
0.15
100
1497350000
4
3
5
19
0.21
100
1497370000
6
3.5
6.5
25
0.51
100
1494720000
10
4.5
7
30
0.60
50
1497130000
16
5.5
8.5
35
1.00
50
1497140000
25
7
10
40
1.41
50
1494730000
35
8.5
12
45
2.16
50
1494740000
50
10
14
50
3.32
50
1494750000
70
12
16.5
55
4.91
50
1494760000
95
13.5
18
60
6.09
50
1494770000
120
15
20
65
7.88
25
1494780000
150
16.8
21.3
70
8.68
25
1497380000
185
19
24
75
11.63
25
1497390000
240
21
26
85
14.22
25
1497400000
A
MTR 160 + MTR 300
15
PZ PK 10/120 + PZ RK 10/120
3.9
APG 55 + HPG 55. APG 80 + HPG 80
1.9
MTR 110
1.0 – 1.5
1497330000
Tool
recommendation
PZ PK 6/70 + PZ RK 6/70
d1
1.4
EPG 45
1541050000 – 2015/2016
Cross-section
mm2
0.5 – 0.75
HTN 21
Technical data
Material:
Surface:
Type:
Ordering data
A.11
Cable lugs and insulated connectors
Introduction
Crimp cable lugs, copper
DIN 46235
A
A.12
1541050000 – 2015/2016
Crimp cable lugs, copper 6 – 95 mm2,
DIN 46235
Ordering data
Cross-section
mm2
6
flat hole
M
5
6
8*
die
code d1
5
3.7
d3
5.5
dimensions in mm
d2
b
I
5.3
8.5
24
6.4
9
24
8.4
13
26
weight
100 pcs./kg
0.31
0.34
0.35
Qty.
(pcs.)
100
100
100
Order No.
1497840000
1497850000
1497860000
6
4.4
6
5.3
6.4
8.4
10.5
10
10
13
15
27
27
28
29
10
0.35
0.37
0.38
0.38
100
100
100
100
1497870000
1497880000
1497890000
1497910000
16
5*
6
8
10
12*
8
5.5
8.5
5.3
6.4
8.4
10.5
13
13
13
13
16.5
19
36
36
37
38
40
20
1.22
1.27
1.30
1.32
1.35
100
100
100
100
100
1497920000
1497930000
1497940000
1497950000
1497960000
25
6
8
10
12
16*
10
7
10
6.4
8.4
10.5
13
17
14
17
17
18
22
39
39
40.5
40.5
45
20
1.62
1.73
1.77
1.72
1.99
100
100
100
100
100
1497970000
1497980000
1497990000
1498000000
1498010000
35
6*
8
10
12
16*
12
8.2
12.5
6.4
8.4
10.5
13
17
17.5
18
20
21
28
42.5
42
42.5
44
47
20
3.12
3.19
3.17
3.11
3.14
100
100
100
100
100
1498020000
1498030000
1498040000
1498050000
1498060000
50
6*
8
10
12
14*
16
20*
14
9.8
14.5
6.4
8.4
10.5
13
15
17
21
20
20
22
23
26
28
30
52
52
52
52
53.5
55.5
61.5
28
4.67
5.00
4.94
4.91
4.94
5.04
5.56
100
100
100
100
100
100
100
1498510000
1498070000
1498080000
1498090000
1498570000
1498110000
1498120000
70
8
10
12
14*
16
20*
16
11.3
16.5
8.4
10.5
13
15
17
21
24
24
24
24
29
31
56
56
56.5
55.5
57
61
28
6.54
6.54
6.57
6.00
6.92
6.99
50
50
50
50
50
50
1498130000
1498140000
1498150000
1498560000
1498160000
1498170000
95
8*
10
12
14*
16
20*
18
13.5
19
8.4
10.5
13
15
17
21
28
28
28
28
30
33
65
65.5
65.5
65.5
65.5
71
35
9.36
9.55
9.45
9.43
9.44
9.86
50
50
50
50
50
50
1498180000
1498190000
1498210000
1498520000
1498220000
1498230000
A
PZ PK 10/120
5
6
8*
10*
Tool
recommendation
CTN 25 D5
10
* not standardized, tube measurements in accordance with DIN 46235
1541050000 – 2015/2016
a
10
EPG 45. APG 55 + HPG 55. APG 80 + HPG 80
Cu according to DIN EN 13600
tin plated
O
PZ PK 6/70
Technical data
Material:
Surface:
D
Cable lugs and insulated connectors
E
G
G
G
Crimp cable lugs, copper, DIN 46235
A.13
Crimp cable lugs, copper,
120 – 300 mm2, DIN 46235
Ordering data
flat hole
M
8*
10
12
14*
16
20
die
code d1
20 15.5
d3
21
dimensions in mm
d2
b
I
8.4
31
70
10.5 31
70
13
31
70.5
15
31
70
17
31.5 70
21
36
72
G
G
weight
100 pcs./kg
11.35
11.40
11.43
11.41
11.36
11.51
Qty.
(pcs.)
50
50
50
50
50
50
Order No.
1498480000
1498240000
1498250000
1498490000
1498270000
1498280000
150
8*
10
12
14*
16
20
22
17
23.5
8.4
10.5
13
15
17
21
34
34
34
34
34
38
79
79
78.5
78
78
78
35
16.40
16.46
16.53
16.49
16.35
16.34
25
25
25
25
25
25
1498290000
1498310000
1498320000
1498580000
1498330000
1498340000
185
8*
10
12
14*
16
20
25
19
25.5
8.4
10.5
13
15
17
21
37
37
37
37
37
40
83
83
82.5
82
82
83
40
18.50
18.50
18.95
18.96
19.41
19.01
25
25
25
25
25
25
1498540000
1498350000
1498360000
1498590000
1498370000
1498380000
240
10*
12
14*
16
20
28
21.5
29
10.5
13
15
17
21
42
42.5
42.5
42.5
45
92
92
92
92
92
40
27.10
26.65
26.73
27.45
27.67
20
20
20
20
20
1498390000
1498410000
1498530000
1498420000
1498430000
300
10*
12*
14*
16
20
32
24.5
32
10.5
13
15
17
21
48.5
48.5
48.5
48.5
48.5
104
104
104
100
100
50
34.80
34.50
34.60
34.16
34.46
10
10
10
10
10
1498440000
1498450000
1498550000
1498460000
1498470000
* not standardized, tube measurements in accordance with DIN 46235
A.14
a
35
Tool
recommendation
APG 80 + HPG 80
Cross-section
mm2
120
APG 55 + HPG 55
Cu according to DIN EN 13600
tin plated
O
EPG 45
Technical data
Material:
Surface:
D
PZ PK 10/120
A
E
G
Cable lugs and insulated connectors
Crimp cable lugs, copper, DIN 46235
1541050000 – 2015/2016
G
G
Cable lugs and insulated connectors
Tubular compression connectors, copper, DIN 46267 part 1
Tubular compression connectors
6 – 300 mm2, DIN 46267 part 1,
strain relieved
weight
100 pcs./kg
0.35
Qty.
(pcs.)
100
Order No.
1498610000
6
4.4
6
30
0.35
100
1498620000
16
8
5.5
8.5
50
1.51
100
1498630000
25
10
7
10
50
1.86
100
1498640000
35
12
8.2
12.5
50
3.20
100
1498650000
50
14
9.8
14.5
56
4.64
50
1498660000
70
16
11.3
16.5
56
5.64
50
1498670000
95
18
13.5
19
70
8.98
50
1498680000
120
20
15.5
21
70
10.27
25
1498690000
150
22
17
23.5
80
14.96
25
1498710000
185
25
19
25.5
85
16.78
25
1498720000
240
28
21.5
29
90
23.20
15
1498730000
300
32
24.5
32
100
30.52
10
1498740000
PZ PK 10/120
10
Tool
recommendation
APG 80 + HPG 80
dimensions in mm
d1
d3
I
3.7
5.5
30
APG 55 + HPG 55
die
code
5
CTN 25 D5
1541050000 – 2015/2016
Cross-section
mm2
6
EPG 45
Cu according to DIN EN 13600
tin plated
Ordering data
PZ PK 6/70
Technical data
Material:
Surface:
O
A
A.15
Cable lugs and insulated connectors
Introduction
Terminals
noninsulated
A
A.16
1541050000 – 2015/2016
Cu-HCP
tin plated
S = small palm
Ordering data
Cross-section
mm2
0.1 – 0.5
flat hole
M
2
3
4
5
d1
1
dimensions in mm
d2
d3
l
2.2 5
10
3.2 5
10
4.3 6.5 12
5.3 8
11
weight
100 pcs./kg
0.02
0.02
0.03
0.03
Qty.
(pcs.)
100
100
100
100
Order No.
1493670000
1493680000
1493690000
1493700000
2.2
2.7
3.2
3.7
4.3
4.3
5.3
5.3
6.5
8.4
10.5
6
6
6
6
7
8
8
10
10
12
14
11
11
11
11
11
12
12
13
13
17
17
5
0.06
0.06
0.06
0.06
0.06
0.07
0.06
0.08
0.07
0.10
0.10
100
100
100
100
100
100
100
100
100
100
100
1493720000
1493730000
1493740000
1493750000
1493760000
1493770000
1493780000
1493790000
1493800000
1493810000
1493710000
1.5 – 2.5
3
3.5
4/S*
4
5/S*
5
6
8
10*
12*
2.3
3.2
3.7
4.3
4.3
5.3
5.3
6.5
8.4
10.5
13
6
6
6.8
8
8
10
11
14
18
18
11
11
11
12
12
14
16
17
20
20
5
0.07
0.06
0.06
0.08
0.07
0.10
0.11
0.14
0.19
0.16
100
100
100
100
100
100
100
100
100
100
1493820000
1493830000
1493840000
1493850000
1493870000
1493890000
1493900000
1493910000
1493930000
1493940000
4–6
4
5
6
8
10
12*
3.6
4.3
5.3
6.5
8.4
10.5
13
8
10
11
14
18
18
14
15
16
19
21
21
6
0.14
0.16
0.17
0.21
0.27
0.23
100
100
100
100
100
100
1493950000
1493960000
1493970000
1493980000
1493990000
1494000000
APG 80 + HPG 80
1.6
A
APG 55 + HPG 55
2*
2.5
3
3.5
4/S*
4
5/S*
5
6*
8*
10*
Tool
recommendation
EPG 45
0.5 – 1
* not standardized, dimensions similar to DIN 46234
1541050000 – 2015/2016
a
4
D
HTN 21
Technical data
Material:
Surface:
O
Cable lugs and insulated connectors
Terminals 0.1 – 6 mm2 ,
DIN 46234
G
G
G
Terminals ring and fork-type, noninsulated
A.17
Terminals 10 – 240 mm2 ,
DIN 46234
d1
4.5
dimensions in mm
d2
d3
l
4.3 10
16
5.3 10
16
6.5 11
17
8.4 14
20
10.5 18
21
13
22
23
a
8
weight
100 pcs./kg
0.23
0.22
0.24
0.29
0.35
0.41
G
Qty.
(pcs.)
100
100
100
100
100
100
Order No.
1494010000
1494020000
1494030000
1494040000
1494050000
1494060000
16
5
6
8
10
12
5.8
5.3
6.5
8.4
10.5
13
11
11
14
18
22
20
20
22
24
26
10
0.40
0.38
0.42
0.50
0.58
100
100
100
100
100
1494070000
1494080000
1494090000
1494100000
1494110000
25
5
6
8
10
12
16
7.5
5.3
6.5
8.4
10.5
13
17
12
12
16
18
22
28
25
25
25
26
31
35
11
0.70
0.71
0.76
0.78
0.97
1.20
50
50
50
50
50
50
1494120000
1494130000
1494140000
1494150000
1494160000
1493490000
35
6
8
10
12
16
20*
9
6.5
8.4
10.5
13
17
21
15
16
18
22
28
30
26
12
26
27
31
36
37.5 14
0.97
0.96
1.00
1.17
1.41
1.67
50
50
50
50
50
50
1494170000
1494180000
1494190000
1493130000
1493140000
1493520000
50
6
8
10
12
16
20*
11
6.5
8.4
10.5
13
17
21
18
18
18
22
28
32
34
16
34
34
36
40
41.2 18
1.75
1.72
1.66
1.80
2.11
2.57
50
50
50
50
50
50
1493510000
1493150000
1493160000
1493170000
1493180000
1493530000
70
6
8
10
12
16
20*
13
6.5
8.4
10.5
13
17
21
22
22
22
22
28
32
38
38
38
38
42
45
19
2.66
2.34
2.58
2.49
2.77
3.06
50
50
50
50
50
50
1493190000
1493210000
1493220000
1493230000
1493240000
1493250000
95
8
10
12
16
20*
15
8.4
10.5
13
17
21
24
24
24
28
32
42
20
42
42
44
51.8
4.24
4.17
3.92
3.94
4.25
25
25
25
25
25
1493260000
1493270000
1493280000
1493290000
1493310000
120
8
10
12
16
20*
16.5 8.4
10.5
13
17
21
24
24
24
28
32
44
44
44
48
53
22
5.77
5.67
5.42
6.21
5.81
25
25
25
25
25
1493320000
1493330000
1493340000
1493350000
1493360000
10
12
16
20*
19
10.5
13
17
21
30
30
30
36
50
50
50
63
24
8.29
8.31
8.01
7.35
25
25
25
25
1493370000
1493380000
1493390000
1493410000
185
10
12
16
20*
21
10.5
13
17
21
36
36
36
36
50
50
50
50
28
11.16
10.78
10.61
10.17
25
25
25
25
1493420000
1493430000
1493440000
1493450000
240
10
12
16
23.5 10.5 38
13
38
17
38
56
56
56
32
15.01
14.98
14.53
25
25
25
1493460000
1493470000
1493480000
150
* not standardized
A.18
flat hole
M
4*
5
6
8
10
12
18
21
27
Tool
recommendation
APG 80 + HPG 80
Cross-section
mm2
10
APG 55 + HPG 55
Cu-HCP
tin plated
Ordering data
EPG 45
Technical data
Material:
Surface:
D
O
CTN 25 D4
A
G
G
Cable lugs and insulated connectors
Terminals ring and fork-type, noninsulated
1541050000 – 2015/2016
D
Terminals
fork-type 0,5 – 16 mm2
Surface:
Cu-HCP (0,5 – 10 mm2)
Cu-ETP (16 mm2)
tin plated
S = small palm
Ordering data
Cross-section
mm2
0.5 – 1
d1
1.6
dimensions in mm
d2
d3
l
3.2 6
11
3.7 6
11
4.3 7
12
4.3 8
12
5.3 10
13
6.5 12
17
a
5
weight
100 pcs./kg
0.06
0.05
0.06
0.07
0.08
0.09
Qty.
(pcs.)
100
100
100
100
100
100
Order No.
1493540000
1493550000
1493560000
1493570000
1493580000
1493590000
11
11
11
12
14
16
5
0.06
0.07
0.06
0.08
0.10
0.11
100
100
100
100
100
100
1493600000
1493610000
1493620000
1493630000
1493640000
1493650000
4–6
C4
C5
C6
C8
3.6
4.3
5.3
6.5
8.4
8
10
11
14
14
15
16
19
6
0.14
0.16
0.16
0.19
100
100
100
100
1493660000
1492650000
1492660000
1492670000
10
C5
C6
4.5
5.3
6.5
10
11
16
17
8
0.23
0.24
100
100
1492680000
1492690000
16
C6
C8
5.8
6.5
8.4
11
14
20
22
10
0.48
0.50
50
50
1492700000
1492710000
APG 80 + HPG 80
6
6.8
6.8
8
10
11
APG 55 + HPG 44
3.2
3.7
4.3
4.3
5.3
6.5
A
CTN 25 D4
2.3
Tool
recommendation
EPG 45
C3
C 3.5
C 4/S
C4
C5
C6
1.5 – 2.5
1541050000 – 2015/2016
flat hole
M
C3
C 3.5
C 4/S
C4
C5
C6
HTN 21
Technical data
Material:
O
Cable lugs and insulated connectors
G
G
G
Terminals ring and fork-type, noninsulated
A.19
D
Pin cable lugs 0.1 – 95 mm2,
DIN 46230
Technical data
Material:
Surface:
Cu-HCP (0.1 – 6 mm2)
Cu-ETP (10 – 95 mm2)
tin plated
O
Ordering data
0.5 – 1
1.6
17
10
5
1.9
0.06
100
1492730000
1.5 – 2.5
2.3
17
22
10
15
5
1.9
0.07
0.09
100
100
1492740000
1492750000*
4–6
3.6
20
11
6
2.6
0.15
100
1492770000
10
4.5
22
12
8
2.3 x 4.2
0.25
100
1492780000
16
5.8
26
13
10
2.5 x 5.6
0.41
100
1492790000
25
7
34.1 16
14
2.5 x 6.9
0.66
50
1492800000*
35
8.4
41
20
16
3.2 x 8.1
1.19
50
1492810000*
50
9.5
45.7 21
19
3.7 x 9.5
1.88
50
1492820000*
70
11.2 55
24
24
4 x 11
3.01
50
1492830000*
95
13.5 55.5 22
24
5.1 x 12.3
4.2
25
1492840000*
* not standardized
A.20
Qty.
(pcs.)
100
Order No.
1492720000
Tool
recommendation
APG 80 + HPG 80
weight
100 pcs./kg
0.02
APG 55 + HPG 55
Ø
pin
1.2
CTN 25 D4
dimensions in mm
d1
l1
l2
a
1
14
9
4
EPG 45
Cross-section
mm2
0.1 – 0.5
HTN 21
A
O
G
Cable lugs and insulated connectors
Pin cable lugs DIN 46230, noninsulated
1541050000 – 2015/2016
Cu-HCP
tin plated
Ordering data
Qty.
(pcs.)
100
Order No.
1.6
3.3
0.04
100
1492860000
1.5 – 2.5
7
2.3
4
0.05
100
1492870000
4–6
7
3.6
5.7
0.09
100
1492880000
10
9
4.6
6.8
0.15
100
1492890000
16
10
5.9
8.3
0.23
100
1492900000
25
12.5
7.7
10.7
0.45
100
1492910000
35
14
9.2
12.4
0.65
100
1492920000
50
17.5
11.2
14.8
1.13
100
1492930000
70
18
13.5
17.5
1.59
100
1492940000
95
19
15
20
2.34
50
1492950000
120
21
16.7
22.7
3.53
50
1492960000
150
25
19
25.5
5.02
50
1492970000
A
APG 80 + HPG 80
7
1492850000
Tool
recommendation
G
G
weight
100 pcs./kg
0.01
APG 55 + HPG 44
0.5 – 1
* not standardized
dimensions in mm
d1
d3
1.2
2
EPG 45
l
5
CTN 25 D4
Cross-section
mm2
0.1 – 0.5*
HTN 21
Technical data
Material:
Surface:
O
Cable lugs and insulated connectors
Parallel connectors 0.1 – 150 mm2,
form A, DIN 46341 part 1
G
G
Parallel connectors and joint connector, noninsulated
O
Joint connector 0.1 – 150 mm2, form B,
DIN 46341 part 1
Cu-HCP
tin plated
Qty.
(pcs.)
100
Order No.
15
1,6
3,3
0,09
100
1492990000
1,5 – 2,5
15
2,3
4
0,11
100
1493010000
4–6
15
3,6
5,7
0,18
100
1493020000
10
20
4,6
6,8
0,36
100
1493030000
16
26
5,9
8,3
0,61
100
1493040000
25
29
7,7
10,7
1,13
100
1493050000
35
32
9,2
12,4
1,55
100
1493060000
50
38
11,2
14,8
2,44
100
1493070000
70
42
13,5
17,5
3,73
50
1493080000
95
48
15
20
6,08
50
1493090000
120
52
16,7
22,7
8,67
50
1493110000
150
56
19
25,5
11,25
50
1493120000
1492980000
Tool
recommendation
APG 80 + HPG 80
1541050000 – 2015/2016
weight
100 pcs./kg
0,02
APG 55 + HPG 55
0,5 – 1
* not standardized
dimensions in mm
d1
d3
1,2
2
CTN 25 D4
l
12
EPG 45
Cross-section
mm2
0,1 – 0,5*
HTN 21
Technical data
Material:
Surface:
Ordering data
A.21
Cable lugs and insulated connectors
Introduction
Insulated connectors
A
A.22
1541050000 – 2015/2016
O
2
tin plated
S = small palm
flat hole colour of
M
insulation d1
2
yellow 1
3
4
5
dimensions in mm
d4
d2
d3
2.3
2.2
5
3.2
5
4.3
6.5
5.3
8
l
14
14
16
16
Cu- weight
100 pcs./kg
0.02
0.02
0.03
0.03
Qty.
(pcs.)
100
100
100
100
2
2.5
3
3.5
4/S
4
5/S
5
6
8
10
red
1.6
4
2.2
2.7
3.2
3.7
4.3
4.3
5.3
5.3
6.5
8.4
10.5
6
6
6
6
7
8
8
10
10
14
18
17
17
17
17
17.5
18
18.5
19
19
23
25
0.06
0.06
0.06
0.06
0.06
0.07
0.06
0.08
0.07
0.10
0.10
100
100
100
100
100
100
100
100
100
100
100
1492140000
1492150000
1492170000
1492180000
1492190000
1492200000
1492210000
1492220000
1492230000
1492240000
1492130000
1.5 – 2.5
3
3.5
4/S
4
5/S
5
6
8
10
12
blue
2.3
4.4
3.2
3.7
4.3
4.3
5.3
5.3
6.5
8.4
10.5
13
6
6
6.8
8
8
10
11
14
18
18
17
17
17.6
18
19.5
20
22
23
25.6
26
0.07
0.06
0.06
0.08
0.07
0.10
0.11
0.14
0.19
0.16
100
100
100
100
100
100
100
100
100
100
1492250000
1492270000
1492280000
1492290000
1492300000
1492310000
1492320000
1492330000
1492340000
1492350000
4–6
4
5
6
8
10
12
yellow
3.6
6.4
4.3
5.3
6.5
8.4
10.5
13
8
10
11
14
18
18
21
22
23
26
28
28
0.14
0.16
0.17
0.21
0.27
0.23
100
100
100
100
100
100
1492370000
1492380000
1492390000
1492400000
1492410000
1492420000
G
G
G
G
O
Ordering data
flat hole colour of
M
insulation d1
5
red
4,5
6
8
10
5
6
8
10
blue
5,8
dimensions in mm
d4
d2
d3
8
5,3
10
6,5
11
8,4
14
10,5 18
10,5
5,3
6,5
8,4
10,5
11
11
14
18
l
24,5
25,5
28,5
29,5
Cu- weight
100 pcs./kg
0,22
0,24
0,29
0,35
31,5
31,5
33,5
35,5
0,40
0,38
0,42
0,50
Qty.
(pcs.)
50
50
50
50
50
50
50
50
Order No.
1492430000
1492440000
1492450000
1492470000
1492480000
1492490000
1492500000
1492510000
Tool
recommendation
APG 80 + HPG 80
Cross-section
mm2
10
16
1541050000 – 2015/2016
A
APG 55 + HPG 55
Surface:
Cu-ETP
insulation: PA
tin plated
Tool
recommendation
EPG 45
Technical data
Material:
1492090000*
1492100000*
1492110000*
1492120000*
0.5 – 1
* insulation PA
Terminals 10 – 16 mm2
with soldered seam and easy-entry
insulation
Order No.
CTI 6 + CTI 6G
Surface:
Cu-ETP
insulation: PC
or
* insulation: PA
Cross-section
mm2
0.1 – 0.5
HTI 15
Technical data
Material:
Ordering data
Cable lugs and insulated connectors
Terminals 0.1 – 6 mm
DIN 46237 soldered seam and
easy-entry insulation
G
G
G
G
Terminals ring type
A.23
Terminals fork type 0.5 – 16 mm
with soldered seam and easy-entry
insulation
Cu-ETP
insulation: PC
or
* insulation: PA
tin plated
S = small palm
Ordering data
Cu- weight
100 pcs./kg
0.06
0.05
0.06
0.07
0.08
0.09
C3
C 3.5
C 4/S
C4
C5
C6
blue
2.3
4.5
3.2
3.7
4.3
4.3
5.3
6.5
4–6
C4
C5
C6
C8
C 10
yellow
3.6
6.4
10
C5
C6
red
4.5
16
C6
C8
blue
5.8
Qty.
(pcs.)
100
100
100
100
100
100
Order No.
5.5
6
6.8
8
10
11
19
17
18.7
18
20
22
0.06
0.07
0.06
0.08
0.10
0.11
100
100
100
100
100
100
1492600000
1492610000
1492620000
1492630000
1492640000
1491260000
4.3
5.3
6.5
8.4
10.5
8
10
11
14
18
21
22
23
26
28
0.14
0.16
0.16
0.19
0.33
100
100
100
100
100
1491270000
1491280000
1491290000
1491310000
1491320000
8
5.3
6.5
10.5
10.8
24.1
24.6
0.23
0.24
50
50
1491330000*
1491340000*
11
6.5
8.4
11
13.8
32.2
32.2
0.48
0.50
50
50
1491350000*
1491360000*
1492520000
1492530000
1492540000
1492550000
1492580000
1492590000
Tool
recommendation
APG 80 + HPG 80
1.5 – 2.5
* insulation PA
l
17
17
18
18.1
19
21
APG 55 + HPG 55
dimensions in mm
d4
d2
d3
4
3.2
6
3.7
6
4.3
6.8
4.3
8
5.3
10
6.5
11
EPG 45
Cross-section flat hole colour of
M
mm2
insulation d1
0.5 – 1
C3
red
1.6
C 3.5
C 4/S
C4
C5
C6
CTI 6 + CTI 6G
Technical data
Material:
Surface:
A.24
G
G
O
2
HTI 15
A
G
G
Cable lugs and insulated connectors
Terminals fork type
1541050000 – 2015/2016
G
G
G
O
Isolation:
Surface:
Cu-HCP (0.1 – 0.5 mm2) or
Cu-ETP (0.5 – 35 mm2)
PC (resp. *PA)
tin plated
Ordering data
Cross-section
mm2
0.1 – 0.5
0.5 – 1
1.5 – 2.5
4–6
10
16
dimensions in mm
d3
I1
1.2
18
1.9
22.8
1.9
22.8
27
6.4
2.8
27
7.8
2.4 x 4.3 34
9.1
2.5 x 5.6 40.7
d1
1
1.7
2.3
d4
2.2
4
4.5
3.6
4.5
5.8
I2
9
11
11
14
11
12
13.5
Cu- weight
100 pcs./kg
0.02
0.06
0.07
0.09
0.15
0.25
0.41
Qty.
(pcs.)
100
100
100
100
100
50
50
G
* insulation PA
colour of
insulation
yellow
red
blue
blau
yellow
red
blue
Joint connector 0.1 – 6 mm2
with soldered seam and easy-entry
insulation
Technical data
Material:
Joint connector 0.14 – 6 mm2
with heat shrink insulation
and lined tubing
Technical data
Material:
Isolation:
Shrink temperature:
Cu-ETP
tin plated
0.14 – 0.5 mm2 = Polyolefin
0.5 – 6 mm2 = Polyethylen
approx. 120 °C
1541050000 – 2015/2016
1491370000*
1491380000
1491390000
1491410000
1491420000
1491430000*
1491440000*
A
O
O
Ordering data
Cross-section
mm2
0.1 – 0.5
0.5 – 1
1.5 – 2.5
4–6
* insulation PA
colour of
insulation
yellow
red
blue
yellow
d1
1.2
1.6
2.3
3.6
dimensions in mm
d4
I1
2
12
4.1
15
4.5
15
6.4
15
Cu- weight
100 pcs./kg
0.02
0.09
0.11
0.18
I2
20
25
26
27
Qty.
(pcs.)
100
100
100
100
G
Isolation:
Surface:
Cu-HCP (0,1 – 0,5 mm2) or.
Cu-ETP (0,5 – 6 mm2)
PC (resp. *PA)
tin plated
Order No.
G
Technical data
Material:
O
Order No.
1491540000*
1491550000
1491560000
1491570000
G
Pin cable lugs 0.1 – 35 mm2 DIN 46231
with soldered seam and easy-entry
insulation
Cable lugs and insulated connectors
Pin cable lugs / joint connector
O
O
Ordering data
Cross-section
mm2
0.14 – 0.5
0.5 – 1
1.5 – 2.5
4–6
* insulation PA
colour of
insulation
yellow
red
blue
yellow
d1
1.4
1.7
2.3
3.6
dimensions in mm
d4
I21
3.1
11.5
4.4
15
5.2
15
6.5
15
I2
24.5
36
36
41
Cu- weight
100 pcs./kg
0.04
0.09
0.11
0.18
Qty.
(pcs.)
50
50
50
20
Order No.
1491490000
1491510000
1491520000
1491530000
A.25
G
O
O
Parallel connectors 0.1 – 6 mm2
Technical data
Material:
Insulation:
Surface:
Cu-HCP
PA
tin plated
Ordering data
Cross-section
mm2
0,1 – 0,5
0,5 – 1
1,5 – 2,5
4–6
colour of
insulation
yellow
red
blue
yellow
d1
1,2
1,7
2,3
3,6
dimensions in mm
d4
I2
2
5
3,2
7
4
7
5,4
7
I1
12
17
17
21,2
Cu- weight
100 pcs./kg
0,01
0,04
0,05
0,09
Qty.
(pcs.)
100
100
100
100
Order No.
Qty.
(pcs.)
100
100
50
Order No.
1491450000
1491460000
1491470000
1491480000
G
G
A
G
Cable lugs and insulated connectors
Parallel connectors / closed end connectors
Closed end connectors 1.5 – 10 mm2
one side closed
Technical data
Material:
Insulation:
Surface:
A.26
Cu-ETP
PA
tin plated
O
Ordering data
Cross-section
mm2
1.5 – 2.5
4–6
10
* insulation PA
colour of
insulation
blue transparent
yellow transparent
transparent
d1
2.3
3.4
5
dimensions in mm
d4
I21
6.4
8
9.2
8.5
11.8
8
I2
15.4
17.7
22
Cu- weight
100 pcs./kg
0.05
0.09
0.15
O
1491580000
1491590000
1491610000
1541050000 – 2015/2016
O
Cable-lug sleeves 0.5 – 6 mm2
Technical data
Material:
Insulation:
Surface:
MS
PVC
tin plated
Ordering data
Cross-section
mm2
colour of
insulation
tabwidth
2.8
2.8
4.8
4.8
6.3
dimensions in mm
tabI1
thickness
0.5
19
0.8
19
0.5
19.4
0.8
19.4
0.8
20.8
I2
Cu- weight
100 pcs./kg
6.5
6.5
6.4
6.4
7.5
0.08
0.08
0.09
0.09
0.10
100
100
100
100
100
1491640000
1491650000
1491660000
1491670000
1491680000
1.5 – 2.5
blue
2.8
2.8
4.8
4.8
6.3
0.5
0.8
0.5
0.8
0.8
19
19
19.4
19.4
20.8
6.5
6.5
6.4
6.4
7.3
0.08
0.08
0.09
0.09
0.11
100
100
100
100
100
1491730000
1491740000
1491690000
1491710000
1491720000
yellow
6.3
9.5
0.8
1.2
23.3
28.6
7.3
12
0.18
0.27
100
100
1491750000
1491760000
2
Ms
PVC
tin plated
Ordering data
Cross-section
mm2
colour of
insulation
tabwidth
2.8
2.8
4.8
4.8
6.3
dimensions in mm
tabI1
thickness
0.5
19.2
0.8
19.2
0.5
20.2
0.8
20.2
0.8
21.5
A
O
I2
Cu- weight
100 pcs./kg
Qty.
(pcs.)
Order No.
6.4
6.4
6.4
6.4
7.3
0.08
0.08
0.10
0.10
0.11
100
100
100
100
100
1491860000
1491870000
1491880000
1491890000
1491910000
0.5 – 1
red
1.5 – 2.5
blue
4.8
4.8
6.3
0.5
0.8
0.8
20.2
20.2
21.5
6.5
6.5
7.3
0.11
0.11
0.14
100
100
100
1491920000
1491930000
1491940000
yellow
6.3
0.8
24.2
7.3
0.20
100
1491950000
4–6
1541050000 – 2015/2016
Order No.
red
O
Technical data
Material:
Insulation:
Surface:
Qty.
(pcs.)
0.5 – 1
4–6
Cable-lug sleeves 0.5 – 6 mm
completely insulated
O
Cable lugs and insulated connectors
Cable-lug sleeves
A.27
Cable lugs and insulated connectors
Cable lug connector / piggy back disconnectors
A
O
O
Cable lug connector 0.5 – 6 mm2
Technical data
Material:
Insulation:
Surface:
MS
PVC
tin plated
Ordering data
Cross-section
mm2
colour of
insulation
tabwidth
2.8
4.8
6.3
dimensions in mm
tabI1
thickness
0.8
19.2
0.8
19.8
0.8
21.8
I2
Cu- weight
100 pcs./kg
Qty.
(pcs.)
Order No.
6.5
6.7
7.7
0.08
0.08
0.09
100
100
100
1491790000
1491810000
1491820000
0.5
red
1.5 – 2.5
blue
4.8
6.3
0.8
0.8
19.8
21.8
6.7
7.7
0.09
0.1
100
100
1491850000
1491830000
yellow
6.3
0.8
24
7.7
0.17
100
1491840000
4–6
O
O
O
Piggy back disconnectors 0.5 – 2.5 mm2
Technical data
Material:
Insulation:
Surface:
A.28
MS
PVC
tin plated
Ordering data
Cross-section
mm2
0.5 – 1
1.5 – 2.5
colour of
insulation
red
blue
tabwidth
6.3
6.3
dimensions in mm
tabI1
l2
thickness
0.8
23.9 8
0.8
23
8
l3
Cu- weight
100 pcs./kg
8.2
8.2
0.15
0.15
Qty.
(pcs.)
100
100
Order No.
1491770000
1491780000
1541050000 – 2015/2016
O
O
Flag female disconnectors
0.5 – 2.5 mm2, completely insulated
Technical data
Material:
Insulation:
Surface:
MS
PVC
tin plated
Ordering data
Cross-section
mm2
0.5 – 1
1.5 – 2.5
colour of
insulation
red
blue
tabwidth
6.3
6.3
dimensions in mm
tabI1
thickness
0.8
16.3
0.8
16.8
I2
Cu- weight
100 pcs./kg
Qty.
(pcs.)
Order No.
15
15
0.14
0.13
100
100
1491960000
1491970000
Cu- weight
100 pcs./kg
Qty.
(pcs.)
Order No.
0.1
0.11
0.17
100
100
100
1492040000
1492050000
1492060000
Cable lugs and insulated connectors
Flag female disconnectors / circular plug
A
O
O
Circular plug 0.5 – 6 mm2
Technical data
Material:
Insulation:
Surface:
MS
PVC
tin plated
1541050000 – 2015/2016
Ordering data
Cross-section
mm2
0.5 – 1
1.5 – 2.5
4–6
colour of
insulation
pin Ø
red
blue
yellow
4
5
5
dimensions in mm
l1
I2
21.5
21.2
24
8.5
8.5
8.5
A.29
Cable lugs and insulated connectors
Round-plug sleeves
A
O
Round-plug sleeves 0.5 – 6 mm2
Technical data
Material:
Insulation:
Surface:
Ordering data
Cross-section
mm2
MS
PVC
tin plated
0.5 – 1
1.5 – 2.5
4–6
colour of
insulation
red
blue
yellow
dimensions in mm
pin Ø
I1
4
5
5
23.3
23.3
25.1
Cu- weight
100 pcs./kg
Qty.
(pcs.)
Order No.
0.13
0.15
0.23
100
100
100
1491980000
1491990000
1492010000
Qty.
(pcs.)
100
100
Order No.
O
Round-plug sleeves 0.5 – 2.5 mm ,
completely insulated
2
Technical data
Material:
Insulation:
Surface:
MS
PA
tin plated
Round-plug sleeves 0,5 – 6 mm
completely insulated
2
Technical data
Material:
Insulation:
Surface:
A.30
MS
PVC
tin plated
Ordering data
Cross-section
mm2
0.5 – 1
1.5 – 2.5
colour of
insulation
red
blue
dimensions in mm
pin Ø
I1
4
25.2
4
25.2
Cu- weight
100 pcs./kg
0.12
0.13
1492020000
1492030000
O
Ordering data
Cross-section
mm2
0.5 – 1
1.5 – 2.5
colour of
insulation
red
blue
dimensions in mm
pin Ø
I1
4
4
27
27
Cu- weight
100 pcs./kg
Qty.
(pcs.)
Order No.
0.13
0.15
100
100
1492070000
1492080000
1541050000 – 2015/2016
3
Insulated hook-type cable lug
Technical data
Material:
Insulation:
Surface:
copper
PC
tin plated
1541050000 – 2015/2016
Ordering data
Cross-section
mm2
colour of
insulation
Ø
dimensions in mm
x L
P
/
Cu- weight
100 pcs./kg
Qty.
(pcs.)
Order No.
0.5 – 1.5
0.5 – 1.5
red
red
4
4
2.1 28.4 17.4
2.1 28.4 17.4
0.74
0.88
100
100
1233340000
1312440000
1.5 – 2.5
1.5 – 2.5
blue
blue
4.5
4.5
2.1 28.2 17.4
2.1 28.2 17.4
1.05
0.88
100
100
1233330000
1312450000
4.0 – 6.0
4.0 – 6.0
yellow
yellow
6.4
6.4
2.8 30.2 17.2
2.8 30.2 17.2
1.59
1.825
100
100
1312470000
1216230000
Cable lugs and insulated connectors
‘
%
[
Hook-type cable lug
A
A.31
A
A.32
1541050000 – 2015/2016
Cable lugs and insulated connectors
Contents
Crimping tools
1541050000 – 2015/2016
Crimping tools
Crimping tools
Introduction / Mechanical and electro-hydraulic crimping tools
B.2
Crimping tools CTI 6 G + CTI 6 / HTI 15 + HTN 21 / CTN 25 D 4
B.8
Crimping tools PZ PK 6/70 and PZ RK 6/70
B.11
Crimping tools PZ PK 10/120 and PZ RK 10/120
B.12
Crimping tools MTR 35
B.13
Crimping tools EPG 45 and MTR 110
B.15
Crimping tools MTR 160 and MTR 300
B.19
Crimping tools APG 55 and HPG 55
B.21
Crimping tools APG 80 and HPG 80
B.24
Battery-powered hydraulic cable cutter AKT 50
B.28
Battery / Battery charger
B.29
B
B.1
Crimping tools
Introduction / Mechanical and electro-hydraulic crimping tools
Mechanical and electro-hydraulic crimping tools
The precision tools from Weidmüller are worldwide in use.
This is a responsibility Weidmüller takes seriously, offering
comprehensive services to support this global use.
B
Tools in daily use should always guarantee consistent
processing quality even after many working cycles.
Weidmüller offers its customers the service of „ToolCertification“. With this technical test procedure Weidmüller
guarantees for the functionality and quality of its tools.
B.2
1541050000 – 2015/2016
Assembly of cable lugs and connectors
general
Crimping tools
Introduction / Mechanical and electro-hydraulic crimping tools
1. Take the measurements of the cable lugs / connectors and their allocation of
cross section out of this catalogue.
2. Cut the cable right-angled to the conductor. Strip off the insulation of the cable.
The part to be stripped of has to be as long as the sleeve (measurement a) of
the cable lug / connector + about 10 %.
3. Before crimping clean the conductor with a wire brush in order to remove dirt
and oxidation. Sectorshaped conductors must be rounded before crimping!
4. Insert the noninsulated conductor into the compression sleeve until it reaches
the wire stop.
5. Before starting to crimp please check whether conductor and cable lug
respectively connector have the same cross section and do fit to each other
according to our catalogue.
6. Please check whether crimping tool and crimping dies are suitable for the cable
lugs/connectors you want to crimp. You can take this information for each
series and cross section from the manufacturer’s catalogue or the operating
instructions of the tool.
7. The crimping process is evaluated, on the cable lug and connector, from the
cable end to the end of the sleeve.(see illustration).
B
For the quantity of crimpings take notice of the preceding charts.
(These you are able to find on the following page)
1541050000 – 2015/2016
B.3
Crimping tools
Introduction / Mechanical and electro-hydraulic crimping tools
Crimping instructions
for euro-series
Crimping instructions
Minimum necessary crimping quantity of cable lugs and connectors for
euro-series. (WM-crimping):
B
Crimping tools and order numbers
Cross section
in mm
6
10
16
25
35
50
70
95
120
150
185
240
300
B.4
crimping
quantity x width
1 x 5 mm
1 x 7 mm
1 x 5 mm
1 x 7 mm
2 x 5 mm
1 x 7 mm
2 x 5 mm
1 x 12 mm
2 x 5 mm
1 x 10 mm
1 x 12 mm
2 x 5 mm
1 x 12 mm
2 x 5 mm
1 x 12 mm
2 x 5 mm
1 x 12 mm
3 x 5 mm
2 x 7 mm
1 x 10 mm
3 x 5 mm
2 x 7 mm
3 x 5 mm
2 x 7 mm
2 x 10 mm
3 x 5 mm
3 x 7 mm
2 x 10 mm
4 x 5 mm
3 x 7 mm
2 x 13 mm
PZ RK 6/70
1500440000
PZ RK 10/120
1500450000
MTR 35
9017500000
MTR 110
9018020000
EPG 45
1500830000
HPG 55
1501400000
APG 55
1501390000
HPG 80
1502420000
APG 80
1502390000
1541050000 – 2015/2016
Introduction / Mechanical and electro-hydraulic crimping tools
Crimping tools
Crimping instructions
for DIN 46235-series and DIN 46267-series
Crimping instructions
Minimum necessary crimping quantity of cable lugs and connectors
for DIN 46235-series and DIN 46267-series (Hexagonal-shape-crimping):
B
Crimping tools and order numbers
cross section die
in mm
code
6
5
10
6
16
8
25
10
35
12
50
14
70
16
95
18
120
20
150
22
185
25
240
28
300
32
crimping
quantity x width
1 x 5 mm
1 x 7 mm
1 x 5 mm
1 x 7 mm
2 x 5 mm
1 x 12 mm
2 x 5 mm
1 x 12 mm
2 x 5 mm
1 x 10 mm
1 x 12 mm
3 x 5 mm
1 x 12 mm
3 x 5 mm
1 x 12 mm
3 x 5 mm
4 x 5 mm
2 x 10 mm
3 x 5 mm
4 x 5 mm
2 x 10 mm
4 x 5 mm
2 x 10 mm
4 x 5 mm
2 x 10 mm
4 x 5 mm
2 x 13 mm
4 x 5 mm
4 x 7 mm
2 x 13 mm
1541050000 – 2015/2016
PZ PK 6/70
1500470000
PZ PK 10/120
1500480000
MTR 35
9017500000
MTR 110
9018020000
EPG 45
1500830000
HPG 55
1501400000
APG 55
1501390000
HPG 80
1502420000
APG 80
1502390000
B.5
Crimping tools
Introduction / Mechanical and electro-hydraulic crimping tools
Traction - specified value
cross section
mm2
B
0,2
0,34
0,5
0,75
1
1,5
2,5
4
6
10
Values for crimpings up to 10 mm² (except end ferrules)
(EN 60352 part 2 release 10/2002)
traction 100 %
130 %
150 %
60 N
85 N
108 N
150 N
230 N
310 N
360 N
380 N
78 N
90 N
111 N
128 N
140 N
162 N
195 N
225 N
299 N
345 N
403 N
465 N
468 N
540 N
494 N
570 N
Values for copper crimpings from 10 mm²
DIN EN 61238-1 release 3/2004
except end ferrules (VDE 0220 part 100 cross-section x 60)
calculation:
traction 100 %
130 %
150 %
10
600 N
780 N
900 N
16
960 N
1.248 N
1.440 N
25
1.500 N
1.950 N
2.250 N
35
2.100 N
2.730 N
3.150 N
50
3.000 N
3.900 N
4.500 N
70
4.200 N
5.490 N
6.300 N
95
5.700 N
7.410 N
8.550 N
120
7.200 N
9.360 N
10.800 N
150
9.000 N
11.700 N
13.500 N
185
11.100 N
14.430 N
16.650 N
240
14.400 N
18.720 N
21.600 N
300
18.000 N
23.400 N
27.000 N
400
24.000 N*
500
30.000 N*
625
37.500 N*
800
48.000 N*
1.000
60.000 N*
Note: * The maximum value of VDE 2002 T100 is 20.000 N!
traction 100 %
28 N
40 N
56 N
84 N
108 N
150 N
230 N
310 N
360 N
Values for aluminium crimpings from 16 mm²
(VDE 0220 part 100 cross-section x 40)
traction 100 %
640 N
1.000 N
1.400 N
2.000 N
2.800 N
3.800 N
4.800 N
6.000 N
7.400 N
9.600 N
12.000 N
16.000 N
20.000 N
25.000 N*
32.000 N*
40.000 N*
calculation:
130 %
832 N
1.300 N
1.820 N
2.600 N
3.640 N
4.940 N
6.240 N
7.800 N
9.620 N
12.480 N
15.600 N
20.800 N
26.000 N
150 %
960 N
1.500 N
2.100 N
3.000 N
4.200 N
5.700 N
7.200 N
9.000 N
11.100 N
14.400 N
18.000 N
24.000 N
30.000 N
To pass the test according to the norm, the conductor in the crimping connection
may not slide by 100 % of the traction during 60 seconds holding time.
B.6
1541050000 – 2015/2016
Crimping tools
B
1541050000 – 2015/2016
B.7
Crimping tools CTI 6 G + CTI 6 / HTI 15 + HTN 21 / CTN 25 D 4
Crimping tools
Crimping tools for other
contacts
• Ratchet for precise crimping
• Release option in the event of incorrect operation
• With end stop for exact positioning of the contacts
CTI 6 G
CTI 6
0,5...6 mm²
0,5...6 mm²
For PVC-, PC- and polyamide-insulated connectors
For PVC-, PC- and polyamide-insulated connectors
• ~AWG 21...10
• Parallel crimp profile for crimping contact and insulation
in one step
• ~AWG 21...10
• Double-crimp profile for crimping contact and insulation
in one step
B
Technical data
Description of contact
Type of contact
Crimping range
Crimping range 1 (with multiple crimping positions)
Crimping range 2 (with multiple crimping positions)
Crimping range 3 (with multiple crimping positions)
Plug width
Tool data
Length
Weight
Note
Ordering data
Version
mm²
mm²
mm²
mm²
mm
mm
g
CTI 6 G
Insulated connector
0.5...6
0.5...1.5
1.1...2.5
2.6...6
CTI 6
Insulated connector
0.5...6
0.5...1.5
1.1...2.5
2.6...6
250
747
250
730
Type
CTI 6 G
CTI 6 G ZERT
Qty.
1
1
Order No.
9202850000
1292880000
Type
CTI 6
CTI 6 ZERT
Qty.
1
1
Order No.
9006120000
9017290000
Note
B.8
1541050000 – 2015/2016
Crimping tools CTI 6 G + CTI 6 / HTI 15 + HTN 21 / CTN 25 D 4
Crimping tools for other
contacts
HTN 21
0.5...2.5 mm²
0.5...6 mm²
Crimping tools
• Ratchet for precise crimping
• Release option in the event of incorrect operation
• With end stop for exact positioning of the contacts
• Tested according to DIN EN 60352 Part 2
HTI 15
B
Technical data
Description of contact
Type of contact
Crimping range
Crimping range 1 (with multiple crimping positions)
Crimping range 2 (with multiple crimping positions)
Crimping range 3 (with multiple crimping positions)
Plug width
Tool data
Length
Weight
Note
Ordering data
Version
Note
1541050000 – 2015/2016
mm²
mm²
mm²
mm²
mm
mm
g
For PVC-, PC- and polyamide-insulated connectors
For uninsulated cable lugs and connectors
• ~AWG 21...14
• Double-crimp profile, for crimping contact and insulation
in one step
• ~AWG 21...10
• Rolled cable lugs, for example acc. to DIN 46234
• Tubular cable lugs
• Pin cable lugs
• Parallel and serial connectors
• Indent crimping
• Alternatively available with or without pivoting
end stop
HTI 15
Insulated connector
0.5...2.5
0.5...1.5
1.1...2.5
HTN 21
Uninsulated connection
0.5...6
0.5...1.5
1.1...2.5
2.6...6
HTN 21 M. AN.
Uninsulated connection
0.5...6
0.5...1.5
1.1...2.5
2.6...6
200
434
200
427
200
427
Type
HTI 15
HTI 15 ZERT
End stop for secure contact positioning in tool
Qty.
1
1
Order No.
9014400000
9017430000
Type
HTN 21
HTN 21 ZERT
HTN 21 M. AN
HTN 21 M. AN ZERT
Qty.
1
1
1
1
Order No.
9014610000
9017380000
9014100000
9017170000
B.9
Crimping tools CTI 6 G + CTI 6 / HTI 15 + HTN 21 / CTN 25 D 4
Crimping tools
Crimping tools for other
contacts
CTN 25 D 5
10...25 mm²
• Ratchet for precise crimping
• Release option in the event of incorrect operation
B
For uninsulated cable lugs and connectors
• ~AWG 8...4
• Rolled cable lugs, acc. to DIN 46234
• Pin cable lugs
• Parallel and serial connectors
• Hexagon crimping
Technical data
Description of contact
Type of contact
Crimping range
Crimping range 1 (with multiple crimping positions)
Crimping range 2 (with multiple crimping positions)
Crimping range 3 (with multiple crimping positions)
Plug width
Tool data
Length
Weight
Note
Ordering data
Version
mm²
mm²
mm²
mm²
mm
mm
g
CTN 25 D5
Uninsulated connection
10...25
10
16
25
250
730
Type
CTN 25 D5
CTN 25 D5 ZERT
Qty.
1
1
Order No.
9006230000
1292870000
Note
B.10
1541050000 – 2015/2016
Crimping tools PZ PK 6/70 and PZ RK 6/70
The cross section can be adjusted by turning the in-built
revolving dies. So there is no need of changing dies.
Furthermore this tool points by small measurements, light
weight, optimized transmission ratio and an extremely high
crimping quality due to precisely guided dies.
PZ PK 6/70
PZ RK 6/70
Crimping tools
Crimping tool
B
Crimping tool for crimping compression cable lugs DIN
46235, compression connectors DIN 46267, aluminium
cable lugs and connectors.
Crimping profile: hexagonal-shape with control embossing
Technical data
Application range
Cu
Alu
Crimping width
Tool data
Length
Weight
Note
Ordering data
Version
Crimping tool for crimping tubular cable lugs and
connectors of the euro-series
Crimping profile: all around WM Style Crimp with control
embossing
PZ RK 6/70
6...70 mm2
mm
PZ PK 6/70
Cu = 6...70 mm2 (K 5 - K 16)
Alu = 10...50 mm2 (K 10 - K 16)
5
mm
g
515
2000
515
2000
Type
PZ PK 6/70
5
Qty.
1
Order No.
1500470000
Type
PZ RK 6/70
Qty.
1
Order No.
1500440000
Note
1541050000 – 2015/2016
B.11
Crimping tools PZ PK 10/120 and PZ RK 10/120
Crimping tools
Crimping tools
The cross section can be adjusted by turning the in-built
revolving crimp insert. So there is no need of changing
crimp inserts.
PZ PK 10/120
PZ RK 10/120
Crimping tool for crimping compression cable lugs DIN
46235, compression connectors DIN 46267, aluminium
cable lugs and connectors
Crimping tool for crimping tubular cable lugs and
connectors of the euro-series. Furthermore this tool
points by small measurements, light weight and an
extremely high crimping quality due to WM-crimping.
B
Crimping profile: hexagonal-shape with control embossing
Technical data
Application range
Cu
Alu
Crimping width
Tool data
Length
Weight
Note
Ordering data
Version
Crimping profile: all around WM Style Crimp with control
embossing
PZ RK 10/120
10...120 mm2
mm
PZ PK 10/120
Cu = 10...20 mm2 (K 6 - K 20)
Alu = 10 ..70 mm2 (K 10 - K 18)
5
mm
g
660
4100
660
4100
Type
PZ PK 10/120
5
Qty.
1
Order No.
1500480000
Type
PZ RK 10/120
Qty.
1
Order No.
1500450000
Note
B.12
1541050000 – 2015/2016
Crimping tools MTR 35
• For insulated and uninsulated cable lugs and connectors
• Mechanical function ensures safe and manageable
operations under different environmental conditions
• Precision engineering means a high pressing force with
little physical effort
• Fast feed helps pre-centreing and extraction of the
connecting parts
• Ratchet for high-quality, flawless crimping
• Release option in the event of incorrect operation
• Comprehensive range of standard-compliant crimp
inserts
MTR 35
6...50 mm²
Crimping tools
Crimping tools for connectors
B
• ~AWG 16...0000
• Tubular cable lugs from 6...50 mm²
• Wire-end ferrules from 6...50 mm²
• Retractable head for easy withdrawal of crimped
connection
Technical data
Description of contact
Pressing force / Deviation
Crimping range for copper tube connector
Crimping range for insulated connectors
Crimping range of wire end ferrule
Tool data
Length / Weight
Note
Ordering data
Version
kN/mm
mm²
mm²
mm²
mm/kg
MTR 35
25 / 8
6...50
10...25
25...50
270 / 1.3
For more details see crimp inserts on the following pages
Type
MTR 35
Qty.
1
Order No.
9017500000
Type
MTR 35
Qty.
1
Order No.
9017840000
Note
Accessories
Note
1541050000 – 2015/2016
Crimping inserts see on the following pages
B.13
Crimping inserts – MTR 35
Crimping inserts WM-shape
Ordering data
Crimping inserts hexagonal-shape
Ordering data
Indent Crimping inserts
Ordering data
Crimping inserts
Ordering data
Crimping inserts square-shape
Ordering data
Crimping tools
• for crimping cable lugs and connectors of the euro-series
B
• for crimping compression copper cable lugs DIN 46 235
• compression copper connectors DIN 46 267 part 1
• aluminium and aluminium/ copper cable lugs and
connectors
• for compression terminals DIN 46234
• pin cable lugs DIN 46230
• connector DIN 46341 part 1
• for insulated compression terminals
• for insulated and non insulated wire-end ferrules
• crimping width 18 mm
B.14
mm2
6
10
16
25
35
50
Code no.
5
6
8
10
12
14
Cu mm2
6
10
16
25
35
50
mm2
6
10
16
25
35
mm2
10
16
25
mm2
6
10
16
25
35
50
Al mm2
–
–
–
10
16+25
35
Crimp. width mm
5
5
5
5
5
5
Order No.
1500490000
1500500000
1500520000
1500530000
1500540000
1500550000
Crimp. width mm
5
5
5
5
5
5
Order No.
1500580000
1500590000
1500600000
1500620000
1500630000
1500640000
Crimp. width mm
5
7
10
10
10
Order No.
1500650000
1500670000
1500680000
1500690000
1500700000
Crimp. width mm
Order No.
7
1500720000
7
1500730000
10
1500740000
Crimp. width mm
18
18
18
18
18
18
Order No.
1500750000
1500770000
1500780000
1500790000
1500800000
1500820000
1541050000 – 2015/2016
Crimping tools EPG 45 and MTR 110
Battery-powered hydraulic compression hand-crimping tool
for crimp cable lugs and connectors up to 150 mm².
• extremely quick processing due to a three-stage axial
piston pump
• wide application range up to 150 mm²
• 270° revolving head with quick opening and closing
• because of a flap closure easy working also in places
with difficult access
• automatic pressure limits and monitoring through
pressure sensor
• engine shutdown and automatic retract after completed
pressing
• electronic regulation and supervision of the press rocess
• manual retract
• save of all crimps and error messages on internal
memory
• selections of all cycles and error messages about USB
interface
• no uncompleted pressing cycles through ongoing
monitoring of the rest battery cargo load
• controlled engine drive to the life extension of gearbox,
engine and battery
• integrated service management and software updates
about the USB interface
• fast tool return pipe through high return flow volume
• sleep-mode; maintenance indication and battery control
• integrated, intelligent electronics assembly with
multifunctional LED
• mini-USB interface for all standard computer systems
for:
– Crimping force graph and error indicatio
– Service Check up
• Li-Ion battery with charge level indicator: 18 V 1.5 Ah
Technical data
Description of contact
Press capacity / piston stroke
Tool data
Length x width x height / weight
Note
Ordering data
Version
kN/mm
mm/kg
EPG 45
6...150 mm²
Crimping tools
Hydraulic battery crimping tool 45 kN
B
Included in delivery
• Hydraulic tool including 1x battery and 1x battery
charger
• Manual
• Software
• USB connection cable
• Carrying bag for tool and Crimping inserts
EPG 45
45 / 16
370 x 123 x 80 / 2.3
Type
EPG 45
EPG 45 120 V
Qty.
1
1
Order No.
1500830000
1508780000
Range of application
Crimping inserts WM-shape for euro-series
Hexagonal crimping inserts for compression cable
lugs (DIN 46235) + connectors (DIN 46267)
Mandrel crimping inserts for compression
terminals DIN 46234
Crimping inserts for insulated compression
terminals
Crimping inserts square-shape for insulated and
non insulated wire-end ferrules
Rounding crimping inserts for rounding sectorshaped copper and aluminium conductors
Ø mm2
6 – 150
6 – 150
(K5-K22)
6 – 50
10 – 50
6 – 50
10 – 150
Note
Accessories
Replacement battery - Li-lon 18 V, 1.5 Ah
Note
1541050000 – 2015/2016
Type
AKKU EPG 45
Ladegerät EPG
Ladegerät EPG 120 V
Qty.
1
1
1
Order No.
1500840000
1509370000
1509380000
B.15
Crimping tools EPG 45 and MTR 110
Crimping tools
Crimping tools for connectors
B
• For insulated and uninsulated cable lugs and connectors
• Mechanical function ensures safe and manageable
operations under different environmental conditions
• Precision engineering means a high pressing force with
little physical effort
• Fast feed helps pre-centreing and extraction of the
connecting parts
• Ratchet for high-quality, flawless crimping
• Release option in the event of incorrect operation
• Comprehensive range of standard-compliant crimp
inserts
MTR 110
6...120 mm²
• ~AWG 16...0000
• Tubular cable lugs from 6...120 mm²
• Wire-end ferrules from 6...50 mm²
• Retractable head for easy withdrawal of crimped
connection
Technical data
Description of contact
Pressing force / Deviation
Crimping range for copper tube connector
Crimping range for insulated connectors
Crimping range of wire end ferrule
Tool data
Length / Weight
Note
Ordering data
Version
kN/mm
mm²
mm²
mm²
MTR 110
55 / 10
6...120
10...16
6...50
mm/kg
420 / 2
For more details see crimp inserts on the following pages
Type
MTR 110
Qty.
1
Order No.
9018020000
Type
MTR 110
Qty.
1
Order No.
9018040000
Note
Accessories
Note
B.16
Crimping inserts see on the following pages
1541050000 – 2015/2016
Crimping inserts WM-shape
• for crimping cable lugs and connectors of the euro-series
Ordering data
mm2
6
10 / 70
16 / 35
25 / 50
95
120
150*
* only EPG 45
Crimping inserts hexagonal-shape
• for crimping compression copper cable lugs DIN 46 235
• compression copper connectors DIN 46 267 part 1
• aluminium and aluminium/copper cable lugs and
connectors
Ordering data
Code no.
5
6 / 16
8 /12
10 /14
18
20
22
Cu mm2
6
10 /70
16 /35
25 /50
95
120
150*
* only EPG 45
Indent Crimping inserts
Ordering data
Crimping inserts
Ordering data
Crimping inserts square-shape
Ordering data
• for compression terminals DIN 46234
• pin cable lugs DIN 46230
• connector DIN 46341 part 1
• for insulated compression terminals
• for insulated and non insulated wire-end ferrules
• crimping width 19 mm
1541050000 – 2015/2016
mm2
6
10
16
25
35
50
70
mm2
10
16
mm2
6
10
16
25
35
50
Al mm2
–
– /50
– /16+25
10 /35
70
–
Crimp. width mm
7
7/5
7 / 10
12 / 5
5
5
5
Order No.
1500850000
1500870000
1500920000
1500880000
1500890000
1500900000
on request
Crimp. width mm
7
7 /5
12 /10
12 /5
5
5
5
Order No.
1500930000
1500940000
1500950000
1500970000
1500980000
1500990000
on request
Crimp. width mm
6
8
10
12
12
12
12
Order No.
1501290000
1501320000
1501330000
1501340000
1501350000
1501370000
1501380000
Crimping tools
Crimping inserts – EPG 45 and MTR 110
B
Crimp. width mm
Order No.
7
1501000000
7
1501020000
Crimp. width mm
19
19
19
19
19
19
Order No.
1501030000
1501040000
1501050000
1501070000
1501170000
1501180000
B.17
Crimping inserts – EPG 45 and MTR 110
Prerounding die sets
Crimping tools
• for rounding sector-shaped copper and aluminium
conductors crimping width: 12 mm
sm = stranded conductors
se = solid conductors
Ordering data
mm2 sm
10
16
25
35
50
70
95
120
mm2 se
–
–
35
50
70
95
120
150
Crimp. width mm
12
12
12
12
12
12
12
12
Order No.
1501190000
1501200000
1501220000
1501230000
1501240000
1501250000
1501270000
1501280000
B
B.18
1541050000 – 2015/2016
Crimping tools MTR 160 and MTR 300
• For insulated and uninsulated cable lugs and connectors
• Mechanical function ensures safe and manageable
operations under different environmental conditions
• Precision engineering means a high pressing force with
little physical effort
• Fast feed helps pre-centreing and extraction of the
connecting parts
• Ratchet for high-quality, flawless crimping
• Release option in the event of incorrect operation
• Comprehensive range of standard-compliant crimp
inserts
MTR 160
MTR 300
10...240 mm²
10...300 mm²
Crimping tools
Crimping tools for connectors
B
• ~AWG 8
• Tubular cable lugs from 10...240 mm²
Technical data
Description of contact
Pressing force / Deviation
Crimping range for copper tube connector
Crimping range for insulated connectors
Tool data
Length / Weight
Note
Ordering data
Version
kN/mm
mm²
mm²
mm/kg
• ~AWG 8
• Tubular cable lugs from 10...300 mm²
• Retractable head for easy withdrawal of crimped
connection
• Turntable presses: 25...240 sm; 35...240 se
MTR 160
100 / 16
MTR 300
100 / 16
10...300
10...120
540 / 4
540 / 4
For more details see crimp inserts on the following pages
sm: sector conductor stranded; se: sector single conductor
For more details see crimp inserts on the following pages
sm: sector conductor stranded; se: sector single conductor
Type
MTR 160
Qty.
1
Order No.
9017250000
Type
MTR 300
Qty.
1
Order No.
9021390000
Type
MTR 160
Qty.
1
Order No.
9017270000
Type
MTR 300
Qty.
1
Order No.
9021420000
Note
Accessories
Note
1541050000 – 2015/2016
Crimping inserts see on the following pages
Crimping inserts see on the following pages
B.19
Crimping inserts – MTR 160 and MTR 300
Crimping tools
MTR 160
B
Code to
Cross-section
DIN 48083
[mm2]
Die sets for copper tube cable lugs and connectors DIN 46235
10
6
16
8
25
10
35
12
50
14
70
16
95
18
120
20
150
22
185
25
240
28
Crimping width
[mm]
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
Crimping width
Cross-section
[mm]
[mm2]
Die sets for copper tube cable lugs and connectors standard Types
10/25
9,8
16/35
9,8
50
8,0
70
8,0
95
8,0
120
8,0
150
8,0
185
8,0
240
8,0
Cross-section
[mm2]
Die sets for insulated cable lugs and connectors,
DIN 46234, DIN 46230
10
16
25
35
50
70
95
120
150
with control mark
Order No.
9020900000
9020910000
9020920000
9020930000
9020940000
9020950000
9020960000
9020970000
9020980000
9020990000
9021000000
Order No.
9021750000
9021760000
9021770000
9021780000
9021790000
9021800000
9021810000
9021820000
9021830000
Order No.
9021300000
9021310000
9021320000
9021330000
9021340000
9021350000
9021360000
9021370000
9021380000
MTR 300
Code to
Cross-section
DIN 48083
[mm2]
Die sets for copper tube cable lugs and connectors DIN 46235
10
6
16
8
25
10
35
12
50
14
70
16
95
18
120
20
150
22
185
25
240
28
300
32
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
Crimping width
Cross-section
[mm]
[mm2]
Die sets for copper tube cable lugs and connectors standard Types
10/25
9,8
16/35
9,8
50
8,0
70
8,0
95
8,0
120
8,0
150
8,0
185
8,0
240
8,0
Order No.
9021430000
9021440000
9021450000
9021460000
9021470000
9021480000
9022290000
9022300000
9022310000
9022320000
9022330000
9022340000
Order No.
9024010000
9024400000
9024410000
9024420000
9024430000
9025210000
9025220000
9025230000
9028020000
Cross-section
[mm2]
Stamp and dies for copper cable lugs and connectors,
DIN 46234, DIN 46230
2-way die
16/35
10/70
25/50
Stamp
10 - 70
Single die
95
120
150
Stamp
95-150
Order No.
Cross-section
[mm2]
Die sets for insulated cable lugs and connectors,
DIN 46231, 46237
10
16
25
35
50
70
95
120
Order No.
Prerounding die sets Cu/Al for sectored cable
25 sm/35 se
35 sm/50 se
50 sm/70 se
70 sm/95 se
95 sm/120 se
120 sm/150 se
150 sm/185 se
185 sm/240 se
B.20
Crimping width
[mm]
9022360000
9022350000
9022370000
9022990000
9022380000
9022390000
9022400000
9023110000
9016180000
9016190000
9016200000
9016210000
9016220000
9016230000
9016240000
9016250000
9016260000
9016270000
9016280000
9016290000
9016370000
9016380000
9016390000
9016440000
1541050000 – 2015/2016
Crimping tools APG 55 and HPG 55
Battery-powered hydraulic compression tool for crimping
cable lugs and connectors up to 240 mm2.
• extremely quick processing due to a two-stage hydraulic
pump
• 270° revolving head with quick opening and closing
• integrated pressure relief valve, false pressings cause no
damage at tool nor dies
• Pressure-relief-button in one-hand operation is able to
press from both sides. (for right-and left handed persons)
• integrated overpressure valve, in case of wrong
pressings, no damage of tools or inserts
• lithium-ion-battery without memory effect, self
discharges very low
• high capacity due 3.0 Ah battery
• fastening eye for balance and carrying strap available
• ergonomic handle with a balanced weight distribution
for sure work free of tiredness
• case, handle shell and pressure discharge key
completely from isolated and push-firm plastic material
• universal usage: dies for all versions of cable lugs and
connectors are available
• integrated electronic module for:
– permanent accumulator-loading state control
– supervision of the working process and state
announcement
– announcement of the next service intervall
– mistake announcement at possible disturbances
Technical data
Description of contact
Press capacity
Operating voltage
Battery charger
Time of loading
Tool data
Length x width x height / weight
Note
Ordering data
Version
kN
Volt
mm/kg
APG 55
6...240 mm²
Crimping tools
Battery-powered compression tool APG 55
B
Included in delivery
• Battery-powered compression tool with battery and
battery charger
• supporting loop for transport and safety
• transport plastic case
APG 55
approx. 55
14.4
220–240V 50–60Hz 7.2-18V
approx. 50 minutes
95 x 350 x 310 mm / 3.6 kg (incl. battery)
Type
APG 55
APG 55 120 V
Qty.
1
1
Order No.
1501390000
1508790000
Note
Accessories
Replacement battery - Li-lon 18 V, 1.5 Ah
Note
1541050000 – 2015/2016
Type
Ersatz Akku APG
Ladegerät APG
Ladegerät APG 120 V
Qty.
1
1
1
Order No.
1502140000
1502170000
1509390000
B.21
Crimping tools APG 55 and HPG 55
Hand-operated hydraulic crimping tool HPG 55
Crimping tools
Hand-operated hydraulic crimping tool for crimping cable
lugs and connectors up to 240 mm2.
B
HPG 55
6...240 mm²
• extremely quick processing due to a two-stage hydraulic
pump
• because of a flap closure easy working also in places
with difficult access
• extremely light, handy and compact construction form
• integrated pressure relief valve, false pressings cause no
damage at tool nor dies
• universal usage: dies for all versions of cable lugs are
available
• delivery completely transport plastic case
• 180° revolving head with quick opening and closing
Technical data
Description of contact
Press capacity / piston stroke
Tool data
Length / Weight
Note
Ordering data
Version
kN/mm
HPG 55
approx. 55
mm/kg
400 / 2.6
Type
HPG 55
Qty.
1
Order No.
1501400000
Note
Accessories
Type
Qty.
Order No.
Note
B.22
1541050000 – 2015/2016
Crimping inserts WM-shape
Ordering data
Crimping inserts hexagonal-shape
Ordering data
• for crimping cable lugs and connectors of the euro-series
• for crimping compression copper cable lugs DIN 46 235
• compression copper connectors DIN 46 267 part 1
• aluminium and aluminium/copper cable lugs and
connectors
mm2
6
10 / 70
16 / 35
25 / 50
95
120
150
185
240
Code no.
5
6 / 16
8 / 12
10 / 14
18
20
22
25
Cu mm2
6
10 / 70
16 / 35
25 / 50
95
120
150
185
Indent Crimping inserts
Ordering data
Crimping inserts
Ordering data
Crimping inserts square-shape
Ordering data
• for compression terminals DIN 46234
• pin cable lugs DIN 46230
• connector DIN 46341 part 1
• for insulated compression terminals
• for insulated and non insulated wire-end ferrules
• crimping width 19 mm
1541050000 – 2015/2016
mm2
6
10
16
25
35
50
70
95
120
mm2
10
16
25
35
50
70
mm2
6
10
16
25
35
50
70
95
120
Al mm2
–
– / 50
– / 16+25
10 / 35
70
–
95+120
150
Crimp. width mm
7
7/5
7/5
12 / 5
5
5
5
5
5
Order No.
1501420000
1501430000
1501440000
1501450000
1501470000
1501480000
1501490000
1501500000
1501520000
Crimp. width mm
7
7/ 5
12/ 5
12/ 5
5
5
5
5
Order No.
1501530000
1501540000
1501550000
1501570000
1501580000
1501590000
1501600000
1501620000
Crimp. width mm
6
8
10
12
12
12
12
12
12
Order No.
1501630000
1501640000
1501650000
1501670000
1501680000
1501690000
1501700000
1501720000
1501730000
Crimp. width mm
7
7
10
10
10
7
Order No.
1501740000
1501750000
1501770000
1501780000
1501790000
1502250000
Crimp. width mm
19
19
19
19
19
19
19
19
19
Order No.
1502270000
1502280000
1502290000
1502300000
1502320000
1502330000
1502340000
1502370000
1502380000
Crimping tools
Crimping inserts – APG 55 and HPG 55
B
B.23
Crimping tools APG 80 and HPG 80
Battery-powered compression tool APG 80
Crimping tools
Battery-powered hydraulic compression tool for crimping
cable lugs and connectors up to 300 mm2.
B
• extremely quick processing due to a two-stage hydraulic
pump
• wide application range up to 300 mm2
• 360° revolving head with quick opening and closing
• Pressure-relief-button in one-hand operation is able to
press from both sides. (for right-and left handed persons)
• suitable for cutting cables up to 28 mm outside diameter
• integrated overpressure valve, in case of wrong
pressings, no damage of tools or inserts
• lithium-ionen-battery without memory effect, selfdischarges very low
• high capacity due to 3.0 Ah-battery
• fastening eye for balance and carrying strap available
• ergonomic handle with a balanced weight distribution
for sure work free of tiredness
• case, handle shell and pressure discharge key
completely from isolated and push-firm plastic material
• universal usage: dies for all versions of cable lugs and
connectors are available
• integrated electronic module for:
– permanent accumulator-loading state control
– supervision of the working process and state
announcement
– announcement of the next service intervall
– mistake announcement at possible disturbances
Technical data
Description of contact
Press capacity
Operating voltage
Battery charger
Time of loading
Tool data
Dimensions (wxlxh) / Weight
Note
Ordering data
Version
kN
mm/kg
APG 80
6...300 mm²
Included in delivery
• Battery-powered compression tool with battery and
battery charger
• supporting loop for transport and safety
• transport plastic case
APG 80
approx. 80
14.4 Volt
220–240 V, 50–60 Hz, 7.2-18 V
approx. 50 minutes
95 x 406 x 310 / 5.4 (incl. battery)
Type
APG 80
APG 80 120 V
Qty.
1
1
Order No.
1502390000
1508820000
Note
Accessories
Note
B.24
Type
Ersatz Akku APG
Ladegerät APG
Ladegerät APG 120 V
Qty.
1
1
1
Order No.
1502140000
1502170000
1509390000
1541050000 – 2015/2016
Crimping tools APG 80 and HPG 80
hand-operated hydraulic compression tool for crimping
cable lugs and connectors up to 300 mm2.
HPG 80
6...300 mm²
Crimping tools
Hand-operated hydraulic compression tool HPG 80
• extremely quick processing due to a two-stage hydraulic
pump
• wide application range up to 300 mm2
• 360° revolving head with quick opening and closing
• integrated pressure relief valve, false pressings cause no
damage at tool nor dies
• universal usage: dies for all versions of cable lugs are
available
B
Included in delivery
• transport plastic case
Technical data
Description of contact
Press capacity
Tool data
Dimensions (Length) / Weight
Note
Ordering data
Version
kN
APG 80
approx. 80
mm/kg
550 / 5.3
Type
APG 80
Qty.
1
Order No.
1502420000
Note
Accessories
Type
Qty.
Order No.
Note
1541050000 – 2015/2016
B.25
Crimping inserts – APG 80 and HPG 80
Crimping inserts WM-shape
Ordering data
Crimping inserts hexagonal-shape
Ordering data
Indent Crimping inserts
Ordering data
Crimping inserts
Ordering data
Crimping tools
• for crimping cable lugs and connectors of the euro-series
B
• for crimping compression copper cable lugs DIN 46 235
• compression copper connectors DIN 46 267 part 1
• aluminium and aluminium/copper cable lugs and
connectors
• for compression terminals DIN 46234
• pin cable lugs DIN 46230
• connector DIN 46341 part 1
• for insulated compression terminals
B.26
mm2
6
10
16
25
35
50
70
95
120
150
185
240
300
Code no.
5
6
8
10
12
14
16
18
20
22
25
28
32
34
Cu mm2
6
10
16
25
35
50
70
95
120
150
185
240
300
–
mm2
6
10
16
25
35
50
70
95
120
150
185
240
mm2
10
16
Al mm2
–
–
–
16
25
35
50
70
–
95 + 120
150
185
240
300
Crimp. width mm
7
7
7
12
12
12
12
12
12
5
5
7
7
Order No.
1502430000
1502440000
1502470000
1502480000
1502490000
1502500000
1502520000
1502530000
1502540000
1502550000
1502570000
1502580000
1502590000
Crimp. width mm
7
7
12
12
12
12
12
10
10
5
5
5
7
13
Order No.
1502600000
1502620000
1502630000
1502640000
1502650000
1502670000
1502680000
1502690000
1502700000
1502720000
1502730000
1502740000
1502750000
1502780000
Crimp. width mm
6
8
10
11
11
16
16
16
16
16
8
8
Order No.
1502820000
1502830000
1502840000
1502850000
1502870000
1502880000
1502890000
1502900000
1502790000
1502800000
1501800000
1501820000
Crimp. width mm
7
7
Order No.
1501830000
1501840000
1541050000 – 2015/2016
Crimping inserts square-shape
• for insulated and non insulated wire-end ferrules
• crimping width 24 mm (10...120 mm2)
crimping width 38 mm (150...240 mm2)
Prerounding die sets
• for rounding sector-shaped copper and aluminium
conductors crimping width:
sm = stranded conductors
se = solid conductors
1541050000 – 2015/2016
Ordering data
mm2
10
16
25
35
50
70
95
120
150
185
240
Ordering data
mm2 sm
10
16
25
35
50
70
95
120
150
185
240
mm2 se
–
–
35
50
70
95
120
150
185
240
300
Crimp. width mm
24
24
24
24
24
24
24
24
38
38
38
Order No.
1502000000
1502020000
1502030000
1502040000
1502050000
1502070000
1502080000
1502090000
1502100000
1502120000
1502130000
Crimping tools
Crimping inserts – APG 80 and HPG 80
B
Crimp. width mm
16
16
16
16
16
16
16
16
16
16
16
Order No.
1501850000
1501870000
1501880000
1501890000
1501900000
1501920000
1501930000
1501940000
1501970000
1501980000
1501990000
B.27
Battery-powered hydraulic cable cutter AKT 50
Battery-powered hydraulic cable cutter AKT 50
Crimping tools
for cut of fine wiring aluminium and copper cables (without
steel insertion) up to 50 mm outside diameter
B
• extremely quick processing due to a two-stage hydraulic
pump
• 360° revolving head with quick opening and closing
• Pressure-relief-button in one-hand operation is able to
press from both sides. (for right-and left handed persons)
• lithium-ionen-battery without memory effect, selfdischarges very low
• high capacity due to 3.0 Ah-battery
• fastening eye for balance and carrying strap available
• ergonomic handle with a balanced weight distribution
for sure work free of tiredness
• case, handle shell and pressure discharge key
completely from isolated and push-firm plastic material
• integrated electronic module for:
– permanent accumulator-loading state control
– supervision of the working process and state
announcement
– announcement of the next service intervall
– mistake announcement at possible disturbances
Technical data
Description of contact
Cutting force
Operating voltage
Battery charger
Time of loading
Tool data
Dimensions (wxlxh) / Weight
Note
Ordering data
Version
kN
mm/kg
AKT 50
Ø 6 ... 50 mm
Included in delivery
• cable cutter, Battery, battery charger
• supporting loop for transport and safety
• transport plastic case
AKT 50
approx. 60
14,4 Volt
220–240 V, 50–60 Hz, 7,2-18 V
approx. 50 minutes
95 x 465 x 310 / 4,9 (incl. battery)
Type
AKT 50
Qty.
1
Order No.
1502190000
Note
Accessories
Type
Qty.
Order No.
Note
B.28
1541050000 – 2015/2016
Battery / Battery charger
BATTERY CHARGER APG
Technical data
Replacement battery - Li-lon
Weight
Ordering data
Type
Battery APG
14.4 V, 3.0 Ah
0.56 kg
Qty.
1
Order No.
1502140000
AKKU EPG 45
Type
AKKU EPG 45
1541050000 – 2015/2016
Ordering data
Type
Ladegerät APG
Ladegerät APG 120 V
220–240 V 50–60 Hz
7.2–18 V
approx. 50 minutes
0.55 kg
Qty.
1
1
Order No.
1502170000
1509390000
B
BATTERY CHARGER EPG
Replacement battery - Li-lon for EPG 45
Weight
Ordering data
Standard-battery charger
Voltage range
Time of loading
Weight
Crimping tools
AKKU APG
18 V, 1,5 Ah
0,41 kg
Qty.
1
Order No.
1500840000
Standard-Battery charger
Voltage range
Time of loading
Weight
Ordering data
Type
Ladegerät EPG
Ladegerät EPG 120 V
220–240 V 50–60 Hz
7.2–18 V
approx. 50 minutes
0.55 kg
Qty.
1
1
Order No.
1509370000
1509380000
B.29
Crimping tools
B
B.30
1541050000 – 2015/2016
Contents
Index
Index
Index
Index Type
X.2
Index Order No.
X.5
Adresses worldwide
X.14
X
1541050000 – 2015/2016
X.1
Type
Index / Type
A
X.2
Page
AKKU APG
AKKU APG
AKKU APG
AKKU EPG 45
AKKU EPG 45
AKT 50
APG 55
APG 55 120V
APG 80
APG 80 120V
1502140000
1502140000
1502140000
1500840000
1500840000
1502190000
1501390000
1508790000
1502390000
1508820000
B.29
B.24
B.21
B.29
B.15
B.28
B.21
B.21
B.24
B.2
CTI 6
CTI 6 G
CTI 6 G ZERT
CTI 6 ZERT
CTN 25 D5
CTN 25 D5 ZERT
9006120000
9202850000
1292880000
9017290000
9006230000
1292870000
B.8
B.8
B.8
B.8
B.10
B.10
EINSATZ MTR 160 10DIN
EINSATZ MTR 160 10HEX
EINSATZ MTR 160 120DIN
EINSATZ MTR 160 120HEX
EINSATZ MTR 160 120WM
EINSATZ MTR 160 150DIN
EINSATZ MTR 160 150HEX
EINSATZ MTR 160 150WM
EINSATZ MTR 160 16+35WM
EINSATZ MTR 160 16DIN
EINSATZ MTR 160 16HEX
EINSATZ MTR 160 185HEX
EINSATZ MTR 160 185WM
EINSATZ MTR 160 240HEX
EINSATZ MTR 160 240WM
EINSATZ MTR 160 25DIN
EINSATZ MTR 160 25HEX
EINSATZ MTR 160 35DIN
EINSATZ MTR 160 35HEX
EINSATZ MTR 160 50DIN
EINSATZ MTR 160 50HEX
EINSATZ MTR 160 50WM
EINSATZ MTR 160 70DIN
EINSATZ MTR 160 70HEX
EINSATZ MTR 160 70WM
EINSATZ MTR 160 95DIN
EINSATZ MTR 160 95HEX
EINSATZ MTR 160 95WM
EINSATZP.HEX10QMM
EINSATZP.HEX120QMM
EINSATZP.HEX150QMM
EINSATZP.HEX16QMM
EINSATZP.HEX185QMM
EINSATZP.HEX240QMM
EINSATZP.HEX25QMM
EINSATZP.HEX300QMM
EINSATZP.HEX35QMM
EINSATZP.HEX50QMM
EINSATZP.HEX70QMM
EINSATZP.HEX95QMM
EINSATZP.WM 10+25QMM
EINSATZP.WM 120QMM
EINSATZP.WM 150QMM
EINSATZP.WM 16+35QMM
EINSATZP.WM 185QMM
EINSATZP.WM 240QMM
EINSATZP.WM 50QMM
EINSATZP.WM 70QMM
EINSATZP.WM 95QMM
EINSATZPAAR ISO 10QMM
EINSATZPAAR ISO 16QMM
EINSATZPAAR ISO 25QMM
EINSATZPAAR ISO 35QMM
EINSATZPAAR ISO 50QMM
EINSATZPAAR ISO 70QMM
EINSATZPAAR ISO 95QMM
EINSATZPAAR ISO120QMM
EPG 45
EPG 45 120V
ES APG/HPG55 AEH 10
ES APG/HPG55 AEH 120
ES APG/HPG55 AEH 16
ES APG/HPG55 AEH 25
ES APG/HPG55 AEH 50
ES APG/HPG55 AEH 6
ES APG/HPG55 AEH 70
ES APG/HPG55 AEH 95
ES APG/HPG55 AEH35
ES APG/HPG55 DIN 10
ES APG/HPG55 DIN 120
ES APG/HPG55 DIN 16
ES APG/HPG55 DIN 25
ES APG/HPG55 DIN 35
ES APG/HPG55 DIN 50
ES APG/HPG55 DIN 6
9021300000
B.20
9020900000
B.20
9021370000
B.20
9020970000
B.20
9021800000
B.20
9021380000
B.20
9020980000
B.20
9021810000
B.20
9021760000
B.20
9021310000
B.20
9020910000
B.20
9020990000
B.20
9021820000
B.20
9021000000
B.20
9021830000
B.20
9021320000
B.20
9020920000
B.20
9021330000
B.20
9020930000
B.20
9021340000
B.20
9020940000
B.20
9021770000
B.20
9021350000
B.20
9020950000
B.20
9021780000
B.20
9021360000
B.20
9020960000
B.20
9021790000
B.20
9021430000B.20
9022300000B.20
9022310000B.20
9021440000B.20
9022320000B.20
9022330000B.20
9021450000B.20
9022340000B.20
9021460000B.20
9021470000B.20
9021480000B.20
9022290000B.20
9024010000
B.20
9025210000
B.20
9025220000
B.20
9024400000
B.20
9025230000
B.20
9028020000
B.20
9024410000
B.20
9024420000
B.20
9024430000
B.20
9016180000
B.20
9016190000
B.20
9016200000
B.20
9016210000
B.20
9016220000
B.20
9016230000
B.20
9016240000
B.20
9016250000
B.20
1500830000
B.15
1508780000
B.15
1502280000
B.23
1502380000
B.23
1502290000
B.23
1502300000
B.23
1502330000
B.23
1502270000
B.23
1502340000
B.23
1502370000
B.23
1502320000
B.23
1501640000
B.23
1501730000
B.23
1501650000
B.23
1501670000
B.23
1501680000
B.23
1501690000
B.23
1501630000
B.23
C
E
X
Order No.
Type
ES APG/HPG55 DIN 70
ES APG/HPG55 DIN 95
ES APG/HPG55 HEX 10/70
ES APG/HPG55 HEX 120
ES APG/HPG55 HEX 150
ES APG/HPG55 HEX 16/35
ES APG/HPG55 HEX 185
ES APG/HPG55 HEX 25/50
ES APG/HPG55 HEX 6
ES APG/HPG55 HEX 95
ES APG/HPG55 ISO 10
ES APG/HPG55 ISO 16
ES APG/HPG55 ISO 25
ES APG/HPG55 ISO 35
ES APG/HPG55 ISO 50
ES APG/HPG55 ISO 70
ES APG/HPG55 WM 120
ES APG/HPG55 WM 150
ES APG/HPG55 WM 16/35
ES APG/HPG55 WM 185
ES APG/HPG55 WM 240
ES APG/HPG55 WM 25/50
ES APG/HPG55 WM 6
ES APG/HPG55 WM 95
ES APG/HPG55 WM10/70
ES APG/HPG80 AEH 10
ES APG/HPG80 AEH 120
ES APG/HPG80 AEH 150
ES APG/HPG80 AEH 16
ES APG/HPG80 AEH 185
ES APG/HPG80 AEH 240
ES APG/HPG80 AEH 25
ES APG/HPG80 AEH 50
ES APG/HPG80 AEH 70
ES APG/HPG80 AEH 95
ES APG/HPG80 AEH35
ES APG/HPG80 DIN 10
ES APG/HPG80 DIN 120
ES APG/HPG80 DIN 150
ES APG/HPG80 DIN 16
ES APG/HPG80 DIN 185
ES APG/HPG80 DIN 240
ES APG/HPG80 DIN 25
ES APG/HPG80 DIN 35
ES APG/HPG80 DIN 50
ES APG/HPG80 DIN 6
ES APG/HPG80 DIN 70
ES APG/HPG80 DIN 95
ES APG/HPG80 HEX 10
ES APG/HPG80 HEX 120
ES APG/HPG80 HEX 150
ES APG/HPG80 HEX 16
ES APG/HPG80 HEX 185
ES APG/HPG80 HEX 240
ES APG/HPG80 HEX 25
ES APG/HPG80 HEX 300
ES APG/HPG80 HEX 300AL
ES APG/HPG80 HEX 35
ES APG/HPG80 HEX 50
ES APG/HPG80 HEX 6
ES APG/HPG80 HEX 70
ES APG/HPG80 HEX 95
ES APG/HPG80 ISO 10
ES APG/HPG80 ISO 16
ES APG/HPG80 RD 10
ES APG/HPG80 RD 120/150
ES APG/HPG80 RD 150/185
ES APG/HPG80 RD 16
ES APG/HPG80 RD 185/240
ES APG/HPG80 RD 240/300
ES APG/HPG80 RD 25/35
ES APG/HPG80 RD 35/50
ES APG/HPG80 RD 50/70
ES APG/HPG80 RD 70/95
ES APG/HPG80 RD 95/120
ES APG/HPG80 WM 120
ES APG/HPG80 WM 150
ES APG/HPG80 WM 16
ES APG/HPG80 WM 185
ES APG/HPG80 WM 240
ES APG/HPG80 WM 25
ES APG/HPG80 WM 300
ES APG/HPG80 WM 35
ES APG/HPG80 WM 50
ES APG/HPG80 WM 6
ES APG/HPG80 WM 70
ES APG/HPG80 WM 95
ES APG/HPG80 WM10
ES MTR110 AEH 10
ES MTR110 AEH 16
ES MTR110 AEH 25
ES MTR110 AEH 35
ES MTR110 AEH 50
ES MTR110 AEH 6
ES MTR110 DIN 10
ES MTR110 DIN 16
ES MTR110 DIN 25
ES MTR110 DIN 35
ES MTR110 DIN 50
Order No.
1501700000
1501720000
1501540000
1501590000
1501600000
1501550000
1501620000
1501570000
1501530000
1501580000
1501740000
1501750000
1501770000
1501780000
1501790000
1502250000
1501480000
1501490000
1501440000
1501500000
1501520000
1501450000
1501420000
1501470000
1501430000
1502000000
1502090000
1502100000
1502020000
1502120000
1502130000
1502030000
1502050000
1502070000
1502080000
1502040000
1502830000
1502790000
1502800000
1502840000
1501800000
1501820000
1502850000
1502870000
1502880000
1502820000
1502890000
1502900000
1502620000
1502700000
1502720000
1502630000
1502730000
1502740000
1502640000
1502750000
1502780000
1502650000
1502670000
1502600000
1502680000
1502690000
1501830000
1501840000
1501850000
1501940000
1501970000
1501870000
1501980000
1501990000
1501880000
1501890000
1501900000
1501920000
1501930000
1502540000
1502550000
1502470000
1502570000
1502580000
1502480000
1502590000
1502490000
1502500000
1502430000
1502520000
1502530000
1502440000
1501040000
1501050000
1501070000
1501170000
1501180000
1501030000
1501320000
1501330000
1501340000
1501350000
1501370000
Page
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.17
B.17
B.17
B.17
B.17
B.17
B.17
B.17
B.17
B.17
B.17
Type
Order No.
Page
ES MTR110 DIN 6
ES MTR110 DIN 70
ES MTR110 HEX 10/70
ES MTR110 HEX 120
ES MTR110 HEX 16/35
ES MTR110 HEX 25/50
ES MTR110 HEX 6
ES MTR110 HEX 95
ES MTR110 ISO 10
ES MTR110 ISO 16
ES MTR110 RUND 10
ES MTR110 RUND 120/150
ES MTR110 RUND 16
ES MTR110 RUND 25/35
ES MTR110 RUND 35/50
ES MTR110 RUND 50/70
ES MTR110 RUND 70/95
ES MTR110 RUND 95/120
ES MTR110 WM 10/70
ES MTR110 WM 120
ES MTR110 WM 16/35
ES MTR110 WM 25/50
ES MTR110 WM 6
ES MTR110 WM 95
ES MTR35 AEH 10
ES MTR35 AEH 16
ES MTR35 AEH 25
ES MTR35 AEH 35
ES MTR35 AEH 50
ES MTR35 AEH 6
ES MTR35 DIN 10
ES MTR35 DIN 16
ES MTR35 DIN 25
ES MTR35 DIN 35
ES MTR35 DIN 6
ES MTR35 HEX 10
ES MTR35 HEX 16
ES MTR35 HEX 25
ES MTR35 HEX 35
ES MTR35 HEX 50
ES MTR35 HEX 6
ES MTR35 ISO 10
ES MTR35 ISO 16
ES MTR35 ISO 25
ES MTR35 WM 10
ES MTR35 WM 16
ES MTR35 WM 25
ES MTR35 WM 35
ES MTR35 WM 50
ES MTR35 WM 6
1501290000
1501380000
1500940000
1500990000
1500950000
1500970000
1500930000
1500980000
1501000000
1501020000
1501190000
1501280000
1501200000
1501220000
1501230000
1501240000
1501250000
1501270000
1500870000
1500920000
1500880000
1500890000
1500850000
1500900000
1500770000
1500780000
1500790000
1500800000
1500820000
1500750000
1500670000
1500680000
1500690000
1500700000
1500650000
1500590000
1500600000
1500620000
1500630000
1500640000
1500580000
1500720000
1500730000
1500740000
1500500000
1500520000
1500530000
1500540000
1500550000
1500490000
FSKI/0,5-1,0/288
FSKI/0,5-1,0/488
FSKI/0,5-1,0/638
FSKI/1,5-2,5/488
FSKI/1,5-2,5/638
FSKI/4,0-6,0/638
1491790000A.28
1491810000A.28
1491820000A.28
1491850000A.28
1491830000A.28
1491840000A.28
GESENK 10+70QMM
GESENK 120QMM
GESENK 150QMM
GESENK 16+35QMM
GESENK 25+50QMM
GESENK 95QMM
9022350000
9022390000
9022400000
9022360000
9022370000
9022380000
B.20
B.20
B.20
B.20
B.20
B.20
HBT 1,5 - 3,0 RT
HBT 1,5 - 4,6 RT
HBT 2,5 - 3,0 BL
HBT 2,5 - 4,6 BL
HBT 6,0 - 3,0 GE
HBT 6,0 - 4,6 GE
HPG 55
HPG 80
HTI 15
HTI 15 ZERT
HTN 21
HTN 21 M. AN
HTN 21 M. AN ZERT
HTN 21 ZERT
1312440000
1233340000
1312450000
1233330000
1312470000
1216230000
1501400000
1502420000
9014400000
9017430000
9014610000
9014100000
9017170000
9017380000
A.31
A.31
A.31
A.31
A.31
A.31
B.22
B.25
B.9
B.9
B.9
B.9
B.9
B.9
KP-M10/-10
KP-M10/-120
KP-M10/-150
KP-M10/-16
KP-M10/-185
KP-M10/-240
KP-M10/-25
KP-M10/-300
KP-M10/-35
KP-M10/-50
KP-M10/-70
1497910000A.13
1498240000A.14
1498310000A.14
1497950000A.13
1498350000A.14
1498390000A.14
1497990000A.13
1498440000A.14
1498040000A.13
1498080000A.13
1498140000A.13
F
G
H
K
B.17
B.17
B.17
B.17
B.17
B.17
B.17
B.17
B.17
B.17
B.18
B.18
B.18
B.18
B.18
B.18
B.18
B.18
B.17
B.17
B.17
B.17
B.17
B.17
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
Type
KP-M10/-95
KP-M12/-120
KP-M12/-150
KP-M12/-16
KP-M12/-185
KP-M12/-240
KP-M12/-25
KP-M12/-300
KP-M12/35
KP-M12/-50
KP-M12/-70
KP-M12/-95
KP-M14/-120
KP-M14/-150
KP-M14/-185
KP-M14/-240
KP-M14/-300
KP-M14/-50
KP-M14/-70
KP-M14/-95
KP-M16/-120
KP-M16/-150
KP-M16/-185
KP-M16/-240
KP-M16/-25
KP-M16/-300
KP-M16/-35
KP-M16/-50
KP-M16/-70
KP-M16/-95
KP-M20/-120
KP-M20/-150
KP-M20/-185
KP-M20/-240
KP-M20/-300
KP-M20/-50
KP-M20/-70
KP-M20/-95
KP-M5/-10
KP-M5/-16
KP-M5/-6
KP-M6/-10
KP-M6/-16
KP-M6/-25
KP-M6/-35
KP-M6/-50
KP-M6/-6
KP-M8/-10
KP-M8/-120
KP-M8/-150
KP-M8/-16
KP-M8/-185
KP-M8/-25
KP-M8/-35
KP-M8/-50
KP-M8/-6
KP-M8/-70
KP-M8/-95
KQIG-M10/-6
KQIG-M3,5/-1
KQIG-M3,5/-2,5
KQIG-M3/-1
KQIG-M3/-2,5
KQIG-M4/-1
KQIG-M4/-2,5
KQIG-M4/-6
KQIG-M4/S/-1
KQIG-M4/S/-2,5
KQIG-M5/-1
KQIG-M5/-10
KQIG-M5/-2,5
KQIG-M5/-6
KQIG-M6/-1
KQIG-M6/-10
KQIG-M6/-16
KQIG-M6/-2,5
KQIG-M6/-6
KQIG-M8/-16
KQIG-M8/-6
KQI-M10/-1
KQI-M10/-10
KQI-M10/-16
KQI-M10/-2,5
KQI-M10/-6
KQI-M12/-2,5
KQI-M12/-6
KQI-M2,5/-1
KQI-M2/-0,5
KQI-M2/-1
KQI-M3,5/-1
KQI-M3,5/-2,5
KQI-M3/-0,5
KQI-M3/-1
KQI-M3/-2,5
KQI-M4/-0,5
KQI-M4/-1
KQI-M4/-2,5
KQI-M4/-6
KQI-M4/S/-1
Order No.
Page
1498190000A.13
1498250000A.14
1498320000A.14
1497960000A.13
1498360000A.14
1498410000A.14
1498000000A.13
1498450000A.14
1498050000A.13
1498090000A.13
1498150000A.13
1498210000A.13
1498490000A.14
1498580000A.14
1498590000A.14
1498530000A.14
1498550000A.14
1498570000A.13
1498560000A.13
1498520000A.13
1498270000A.14
1498330000A.14
1498370000A.14
1498420000A.14
1498010000A.13
1498460000A.14
1498060000A.13
1498110000A.13
1498160000A.13
1498220000A.13
1498280000A.14
1498340000A.14
1498380000A.14
1498430000A.14
1498470000A.14
1498120000A.13
1498170000A.13
1498230000A.13
1497870000A.13
1497920000A.13
1497840000A.13
1497880000A.13
1497930000A.13
1497970000A.13
1498020000A.13
1498510000A.13
1497850000A.13
1497890000A.13
1498480000A.14
1498290000A.14
1497940000A.13
1498540000A.14
1497980000A.13
1498030000A.13
1498070000A.13
1497860000A.13
1498130000A.13
1498180000A.13
1491320000A.24
1492530000A.24
1492610000A.24
1492520000A.24
1492600000A.24
1492550000A.24
1492630000A.24
1491270000A.24
1492540000A.24
1492620000A.24
1492580000A.24
1491330000A.24
1492640000A.24
1491280000A.24
1492590000A.24
1491340000A.24
1491350000A.24
1491260000A.24
1491290000A.24
1491360000A.24
1491310000A.24
1492130000A.23
1492470000A.23
1492510000A.23
1492340000A.23
1492410000A.23
1492350000A.23
1492420000A.23
1492150000A.23
1492090000A.23
1492140000A.23
1492180000A.23
1492270000A.23
1492100000A.23
1492170000A.23
1492250000A.23
1492110000A.23
1492200000A.23
1492290000A.23
1492370000A.23
1492190000A.23
1541050000 – 2015/2016
KQI-M4/S/-2,5
KQI-M5/-0,5
KQI-M5/-1
KQI-M5/-10
KQI-M5/-16
KQI-M5/-2,5
KQI-M5/-6
KQI-M5/S/-1
KQI-M5/S/2,5
KQI-M6/-1
KQI-M6/-10
KQI-M6/-16
KQI-M6/-2,5
KQI-M6/-6
KQI-M8/-1
KQI-M8/-10
KQI-M8/-16
KQI-M8/-2,5
KQI-M8/-6
KQNG-M3,5/-1
KQNG-M3,5/-2,5
KQNG-M3/-1
KQNG-M3/-2,5
KQNG-M4/-1
KQNG-M4/-2,5
KQNG-M4/-6
KQNG-M4/S/-1
KQNG-M4/S/-2,5
KQNG-M5/-1
KQNG-M5/-10
KQNG-M5/-2,5
KQNG-M5/-6
KQNG-M6/-1
KQNG-M6/-10
KQNG-M6/-16
KQNG-M6/-2,5
KQNG-M6/-6
KQNG-M8/-16
KQNG-M8/-6
KQN-M10/-1
KQN-M10/-10
KQN-M10/-120
KQN-M10/-150
KQN-M10/-16
KQN-M10/-185
KQN-M10/-2,5
KQN-M10/-240
KQN-M10/-25
KQN-M10/-35
KQN-M10/-50
KQN-M10/-6
KQN-M10/-70
KQN-M10/-95
KQN-M12/-10
KQN-M12/-120
KQN-M12/-150
KQN-M12/-16
KQN-M12/-185
KQN-M12/-2,5
KQN-M12/-240
KQN-M12/-25
KQN-M12/-35
KQN-M12/-50
KQN-M12/-6
KQN-M12/-70
KQN-M12/-95
KQN-M16/-120
KQN-M16/-150
KQN-M16/-185
KQN-M16/-240
KQN-M16/-25
KQN-M16/-35
KQN-M16/-50
KQN-M16/-70
KQN-M16/-95
KQN-M2,5/-1
KQN-M2/-0,5
KQN-M2/-1
KQN-M20/-120
KQN-M20/-150
KQN-M20/-185
KQN-M20/-35
KQN-M20/-50
KQN-M20/-70
KQN-M20/-95
KQN-M3,5/-1
KQN-M3,5/-2,5
KQN-M3/-0,5
KQN-M3/-1
KQN-M3/-2,5
KQN-M4/-0,5
KQN-M4/-1
KQN-M4/-10
KQN-M4/-2,5
KQN-M4/-6
KQN-M4/S/-1
KQN-M4/S/-2,5
KQN-M5/-0,5
KQN-M5/-1
1541050000 – 2015/2016
Order No.
Page
1492280000A.23
1492120000A.23
1492220000A.23
1492430000A.23
1492480000A.23
1492310000A.23
1492380000A.23
1492210000A.23
1492300000A.23
1492230000A.23
1492440000A.23
1492490000A.23
1492320000A.23
1492390000A.23
1492240000A.23
1492450000A.23
1492500000A.23
1492330000A.23
1492400000A.23
1493550000A.19
1493610000A.19
1493540000A.19
1493600000A.19
1493570000A.19
1493630000A.19
1493660000A.19
1493560000A.19
1493620000A.19
1493580000A.19
1492680000A.19
1493640000A.19
1492650000A.19
1493590000A.19
1492690000A.19
1492700000A.19
1493650000A.19
1492660000A.19
1492710000A.19
1492670000A.19
1493710000A.17
1494050000A.18
1493330000A.18
1493370000A.18
1494100000A.18
1493420000A.18
1493930000A.17
1493460000A.18
1494150000A.18
1494190000A.18
1493160000A.18
1493990000A.17
1493220000A.18
1493270000A.18
1494060000A.18
1493340000A.18
1493380000A.18
1494110000A.18
1493430000A.18
1493940000A.17
1493470000A.18
1494160000A.18
1493130000A.18
1493170000A.18
1494000000A.17
1493230000A.18
1493280000A.18
1493350000A.18
1493390000A.18
1493440000A.18
1493480000A.18
1493490000A.18
1493140000A.18
1493180000A.18
1493240000A.18
1493290000A.18
1493730000A.17
1493670000A.17
1493720000A.17
1493360000A.18
1493410000A.18
1493450000A.18
1493520000A.18
1493530000A.18
1493250000A.18
1493310000A.18
1493750000A.17
1493830000A.17
1493680000A.17
1493740000A.17
1493820000A.17
1493690000A.17
1493770000A.17
1494010000A.18
1493850000A.17
1493950000A.17
1493760000A.17
1493840000A.17
1493700000A.17
1493790000A.17
Type
KQN-M5/-10
KQN-M5/-16
KQN-M5/-2,5
KQN-M5/-25
KQN-M5/-6
KQN-M5/S/-1
KQN-M5/S/-2,5
KQN-M6/-1
KQN-M6/-10
KQN-M6/-16
KQN-M6/-2,5
KQN-M6/-25
KQN-M6/-35
KQN-M6/-50
KQN-M6/-6
KQN-M6/-70
KQN-M8/-1
KQN-M8/-10
KQN-M8/-120
KQN-M8/-16
KQN-M8/-2,5
KQN-M8/-25
KQN-M8/-35
KQN-M8/-50
KQN-M8/-6
KQN-M8/-70
KQN-M8/-95
KRN-M10/-10
KRN-M10/-120
KRN-M10/-120 S
KRN-M10/-150
KRN-M10/-150 S
KRN-M10/-16
KRN-M10/-185
KRN-M10/-185 S
KRN-M10/-240
KRN-M10/-240 S
KRN-M10/-25
KRN-M10/-300
KRN-M10/300 S
KRN-M10/-35
KRN-M10/-50
KRN-M10/-50 S
KRN-M10/-6
KRN-M10/-70
KRN-M10/-70 S
KRN-M10/-95
KRN-M10/-95 S
KRN-M12/-10
KRN-M12/-120
KRN-M12/-120 S
KRN-M12/-150
KRN-M12/-150 S
KRN-M12/-16
KRN-M12/-185
KRN-M12/-185 S
KRN-M12/-240
KRN-M12/-240 S
KRN-M12/-25
KRN-M12/-300
KRN-M12/-300 S
KRN-M12/-35
KRN-M12/-50
KRN-M12/-6
KRN-M12/-70
KRN-M12/-70 S
KRN-M12/-95
KRN-M12/-95 S
KRN-M14/-120
KRN-M14/-150
KRN-M14/-185
KRN-M14/-240
KRN-M14/-25
KRN-M14/-300
KRN-M14/-50
KRN-M14/-70
KRN-M14/-95
KRN-M16/-120
KRN-M16/-150
KRN-M16/-185
KRN-M16/-185 S
KRN-M16/-240
KRN-M16/-240 S
KRN-M16/-300
KRN-M16/-300 S
KRN-M16/-50
KRN-M16/-70
KRN-M16/-95
KRN-M20/-120
KRN-M20/-150
KRN-M20/-185
KRN-M20/-240
KRN-M20/-300
KRN-M20/-50
KRN-M20/-70
KRN-M20/-95
KRN-M3/-0,75
KRN-M3/-1,5
KRN-M4/-0,75
Order no.
Page
1494020000A.18
1494070000A.18
1493890000A.17
1494120000A.18
1493960000A.17
1493780000A.17
1493870000A.17
1493800000A.17
1494030000A.18
1494080000A.18
1493900000A.17
1494130000A.18
1494170000A.18
1493510000A.18
1493970000A.17
1493190000A.18
1493810000A.17
1494040000A.18
1493320000A.18
1494090000A.18
1493910000A.17
1494140000A.18
1494180000A.18
1493150000A.18
1493980000A.17
1493210000A.18
1493260000A.18
1496940000A.5
1495650000A.6
1494920000
A.7
1495710000A.6
1494950000
A.7
1497000000A.5
1495430000A.6
1494980000
A.7
1495490000A.6
1494340000
A.7
1496510000A.5
1495530000A.6
1494380000
A.7
1496570000A.6
1496610000A.6
1494840000
A.7
1497200000A.5
1496670000A.6
1494870000
A.7
1495610000A.6
1494900000
A.7
1496950000A.5
1495670000A.6
1494930000
A.7
1495720000A.6
1494970000
A.7
1497010000A.5
1495440000A.6
1494990000
A.7
1495500000A.6
1494350000
A.7
1496520000A.5
1495540000A.6
1494390000
A.7
1496580000A.6
1496620000A.6
1497210000A.5
1495570000A.6
1494880000
A.7
1495620000A.6
1494910000
A.7
1495800000A.6
1495810000A.6
1497250000A.6
1497270000A.6
1496530000A.5
1497280000A.6
1495750000A.6
1495770000A.6
1495780000A.6
1495680000A.6
1495730000A.6
1495450000A.6
1495000000
A.7
1495510000A.6
1494370000
A.7
1495550000A.6
1494400000
A.7
1496630000A.6
1495580000A.6
1495630000A.6
1495690000A.6
1495740000A.6
1495470000A.6
1495520000A.6
1497240000A.6
1495840000A.6
1495590000A.6
1495640000A.6
1495010000A.5
1495040000A.5
1495020000A.5
Type
KRN-M4/-1,5
KRN-M4/-10
KRN-M4/-2,5
KRN-M4/-4
KRN-M4/-6
KRN-M5/-0,75
KRN-M5/-1,5
KRN-M5/-10
KRN-M5/-16
KRN-M5/-2,5
KRN-M5/-25
KRN-M5/-4
KRN-M5/-6
KRN-M6/-1,5
KRN-M6/-10
KRN-M6/-120 S
KRN-M6/-150 S
KRN-M6/-16
KRN-M6/-2,5
KRN-M6/-25
KRN-M6/-35
KRN-M6/-35 S
KRN-M6/-4
KRN-M6/-50
KRN-M6/-50 S
KRN-M6/-6
KRN-M6/-70
KRN-M6/-70 S
KRN-M6/-95
KRN-M6/-95 S
KRN-M8/-10
KRN-M8/-120
KRN-M8/-120 S
KRN-M8/-150
KRN-M8/-150 S
KRN-M8/-16
KRN-M8/-185
KRN-M8/-2,5
KRN-M8/-240
KRN-M8/-25
KRN-M8/-35
KRN-M8/-35 S
KRN-M8/-4
KRN-M8/-50
KRN-M8/-50 S
KRN-M8/-6
KRN-M8/-70
KRN-M8/-70 S
KRN-M8/-95
KRN-M8/-95 S
KSI/0,1-0,5
KSI/0,5-1,0
KSI/1,5-2,5
KSI/1,5-2,5
KSI/-10
KSI/-16
KSI/4,0-6,0
KSN/0,1-0,5
KSN/0,5-1,0
KSN/1,5-2,5
KSN/-10
KSN/-16
KSN/-2,5
KSN/-25
KSN/-35
KSN/-50
KSN/-6,0
KSN/-70
KSN/-95
KWN-M10/-10 45
KWN-M10/-10 90
KWN-M10/-120 45
KWN-M10/-120 90
KWN-M10/-150 45
KWN-M10/150 90
KWN-M10/-16 45
KWN-M10/-16 90
KWN-M10/-185 45
KWN-M10/-185 90
KWN-M10/-240 90
KWN-M10/-25 45
KWN-M10/-25 90
KWN-M10/-35 45
KWN-M10/-35 90
KWN-M10/-50 45
KWN-M10/-50 90
KWN-M10/-6 90
KWN-M10/-70 45
KWN-M10/-70 90
KWN-M10/-95 45
KWN-M10/-95 90
KWN-M12/-10 90
KWN-M12/-120 45
KWN-M12/-120 90
KWN-M12/-150 90
KWN-M12/-16 90
KWN-M12/-185 45
KWN-M12/-185 90
KWN-M12/-240 45
Order No.
Page
1495050000A.5
1496900000A.5
1495090000A.5
1495130000A.5
1497150000A.5
1495030000A.5
1495070000A.5
1496910000A.5
1496970000A.5
1495100000A.5
1495830000A.5
1495140000A.5
1497170000A.5
1495080000A.5
1496920000A.5
1494410000
A.7
1494440000
A.7
1496980000A.5
1495110000A.5
1496490000A.5
1496540000A.6
1494790000
A.7
1495150000A.5
1496590000A.6
1494820000
A.7
1497180000A.5
1496640000A.6
1494850000
A.7
1495820000A.6
1494430000
A.7
1496930000A.5
1495790000A.6
1494420000
A.7
1495700000A.6
1494940000
A.7
1496990000A.5
1497290000A.6
1495120000A.5
1495480000A.6
1496500000A.5
1496550000A.6
1494810000
A.7
1495170000A.5
1496600000A.6
1494830000
A.7
1497190000A.5
1496650000A.6
1494860000
A.7
1495600000A.6
1494890000
A.7
1491370000A.25
1491380000A.25
1491410000A.25
1491390000A.25
1491430000A.25
1491440000A.25
1491420000A.25
1492720000A.20
1492730000A.20
1492740000A.20
1492780000A.20
1492790000A.20
1492750000A.20
1492800000A.20
1492810000A.20
1492820000A.20
1492770000A.20
1492830000A.20
1492840000A.20
1496840000
A.10
1497050000
A.8
1496400000
A.10
1494450000
A.9
1496440000
A.10
1494500000
A.9
1496890000
A.10
1497110000
A.8
1495340000
A.10
1494540000
A.9
1494590000
A.9
1496200000
A.10
1495880000
A.8
1496240000
A.10
1495930000
A.8
1496290000
A.10
1495980000
A.9
1496150000
A.8
1496320000
A.10
1496030000
A.9
1496350000
A.10
1496090000
A.9
1497070000
A.8
1496410000
A.10
1494470000
A.9
1494510000
A.9
1497120000
A.8
1495350000
A.10
1494550000
A.9
1495400000
A.10
Type
Order No.
Page
KWN-M12/-240 90
KWN-M12/-25 45
KWN-M12/-25 90
KWN-M12/-300 90
KWN-M12/-35 45
KWN-M12/-35 90
KWN-M12/-50 45
KWN-M12/-50 90
KWN-M12/-6 90
KWN-M12/-70 45
KWN-M12/-70 90
KWN-M12/-95 45
KWN-M12/-95 90
KWN-M14/-25 90
KWN-M14/-35 90
KWN-M14/50 90
KWN-M14/-70 90
KWN-M14/-95 90
KWN-M16/-120 45
KWN-M16/-120 90
KWN-M16/-150
KWN-M16/-150 45
KWN-M16/-150 90
KWN-M16/-185 45
KWN-M16/-185 90
KWN-M16/-240 45
KWN-M16/-240 90
KWN-M16/-300 90
KWN-M16/-35 90
KWN-M16/-50 90
KWN-M16/-70 90
KWN-M16/-95 45
KWN-M16/-95 90
KWN-M20/-150 45
KWN-M20/-150 90
KWN-M20/-185 45
KWN-M20/-185 90
KWN-M20/-240 45
KWN-M20/-240 90
KWN-M20/-300 90
KWN-M20/-50 90
KWN-M20/-70 90
KWN-M3/-0,75 90
KWN-M3/-1,5 90
KWN-M4/-0,75 90
KWN-M4/-1,5 90
KWN-M4/-2,5 90
KWN-M4/-4 90
KWN-M5/-0,75 90
KWN-M5/-1,5 90
KWN-M5/-10 45
KWN-M5/-10 90
KWN-M5/-16 45
KWN-M5/-16 90
KWN-M5/-2,5 90
KWN-M5/-4 90
KWN-M5/-6
KWN-M5/-6 90
KWN-M6/-1,5 90
KWN-M6/-10 45
KWN-M6/-10 90
KWN-M6/-16 45
KWN-M6/16 90
KWN-M6/-2,5 90
KWN-M6/-25 45
KWN-M6/-25 90
KWN-M6/-35 45
KWN-M6/-35 90
KWN-M6/-4 90
KWN-M6/-50 45
KWN-M6/-50 90
KWN-M6/-6 90
KWN-M6/-70 90
KWN-M8/-10 45
KWN-M8/-10 90
KWN-M8/-120 45
KWN-M8/-120 90
KWN-M8/-150 45
KWN-M8/-150 90
KWN-M8/-16 45
KWN-M8/-16 90
KWN-M8/-2,5 90
KWN-M8/-25 45
KWN-M8/-25 90
KWN-M8/-35 45
KWN-M8/-35 90
KWN-M8/-4 90
KWN-M8/-50 45
KWN-M8/-50 90
KWN-M8/-6 90
KWN-M8/-70 45
KWN-M8/-70 90
KWN-M8/-95 45
KWN-M8/-95 90
1494610000
A.9
1496210000
A.10
1495890000
A.8
1497300000
A.9
1496250000
A.10
1495940000
A.8
1496300000
A.10
1495990000
A.9
1496170000
A.8
1496330000
A.10
1496040000
A.9
1496370000
A.10
1496100000
A.9
1495900000
A.8
1494640000
A.8
1494650000
A.9
1494660000
A.9
1494670000
A.9
1496420000
A.10
1494480000
A.9
1496470000A.10
1496450000
A.10
1494520000
A.9
1495370000
A.10
1494570000
A.9
1495410000
A.10
1494620000
A.9
1497310000
A.9
1494690000
A.8
1496000000
A.9
1496050000
A.9
1496380000
A.10
1496110000
A.9
1496480000
A.10
1494530000
A.9
1495380000
A.10
1494580000
A.9
1495420000
A.10
1494630000
A.9
1497320000
A.9
1494710000
A.9
1496070000
A.9
1495180000
A.8
1495210000
A.8
1495190000
A.8
1495220000
A.8
1495250000
A.8
1495300000
A.8
1495200000
A.8
1495230000
A.8
1496810000
A.10
1497020000
A.8
1496850000
A.10
1497080000
A.8
1495270000
A.8
1495310000
A.8
1496120000A.8
1497220000
A.8
1495240000
A.8
1496820000
A.10
1497030000
A.8
1496870000
A.10
1497090000
A.8
1495280000
A.8
1496180000
A.10
1495850000
A.8
1496220000
A.10
1495910000
A.8
1495320000
A.8
1496270000
A.10
1495950000
A.9
1496130000
A.8
1496010000
A.9
1496830000
A.10
1497040000
A.8
1496390000
A.10
1494680000
A.9
1496430000
A.10
1494490000
A.9
1496880000
A.10
1497100000
A.8
1495290000
A.8
1496190000
A.10
1495870000
A.8
1496230000
A.10
1495920000
A.8
1495330000
A.8
1496280000
A.10
1495970000
A.9
1496140000
A.8
1496310000
A.10
1496020000
A.9
1496340000
A.10
1496080000
A.9
LADEGERAET APG
LADEGERAET APG
1502170000
1502170000
L
Index / Type
Type
X
B.29
B.24
X.3
Index / Type
Type
1502170000
1509390000
1509390000
1509390000
1509370000
1509370000
1509380000
1509380000
MAKTX
MTR 110
MTR 110
MTR 110
MTR 160
MTR 300
MTR 35
MTR 35
MTR 35
MATNRIDX
9018020000
B.16
9018020000
B.5
9018020000
B.4
9017250000
B.19
9021390000
B.19
9017500000
B.13
9017500000
B.5
9017500000
B.4
PZ PK 10/120
PZ PK 6/70
PZ RK 10/120
PZ RK 6/70
1500480000
1500470000
1500450000
1500440000
B.12
B.11
B.12
B.11
RUNDPRESSEINS 120SM150SE
RUNDPRESSEINS 150SM185SE
RUNDPRESSEINS 185SM240SE
RUNDPRESSEINS 25SM35SE
RUNDPRESSEINS 35SM50SE
RUNDPRESSEINS 50SM70SE
RUNDPRESSEINS 70SM95SE
RUNDPRESSEINS 95SM120SE
9016380000
9016390000
9016440000
9016260000
9016270000
9016280000
9016290000
9016370000
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
STEMPEL 10-70QMM
STEMPEL 95-150QMM
9022990000
9023110000
B.20
B.20
TRAGEKASTEN MTR 110
TRAGEKASTEN MTR 300
TRAGEKASTEN MTR 35
TRAGETASCHE MTR 160
9018040000
9021420000
9017840000
9017270000
B.16
B.19
B.13
B.19
VEI/1,5-2,5
VEI/-10
VEI/4-6
VFSKHI/0,5-1,0/288
VFSKHI/0,5-1,0/485
VFSKHI/0,5-1,0/488
VFSKHI/0,5-1,0/638
VFSKHI/05-1,0/285
VFSKHI/1,5-2,5/285
VFSKHI/1,5-2,5/288
VFSKHI/1,5-2,5/485
VFSKHI/1,5-2,5/488
VFSKHI/1,5-2,5/638
VFSKHI/4,0-6,0/638
VFSKHI/4,0-6,0/9512
VFSKHV/0,5-1,0/285
VFSKHV/0,5-1,0/288
VFSKHV/0,5-1,0/485
VFSKHV/0,5-1,0/488
VFSKHV/0,5-1,0/638
VFSKHV/1,5-2,5/485
VFSKHV/1,5-2,5/488
VFSKHV/1,5-2,5/638
VFSKHV/4,0-6,0/638
VPLI/0,1-0,5
VPLI/0,5-1,0
VPLI/1,5-2,5
VPLI/4,0-6,0
VPLN/0,1-0,5
VPLN/0,5-1,0
VPLN/1,5-2,5
VPLN/-10
VPLN/-120
VPLN/-150
VPLN/-16
VPLN/-25
VPLN/-35
VPLN/4-6,0
VPLN/-50
VPLN/-70
VPLN/-95
VPN/-10
VPN/-120
VPN/-150
VPN/-16
VPN/-185
1491580000A.26
1491610000A.26
1491590000A.26
1491650000A.27
1491660000A.27
1491670000A.27
1491680000A.27
1491640000A.27
1491730000A.27
1491740000A.27
1491690000A.27
1491710000A.27
1491720000A.27
1491750000A.27
1491760000A.27
1491860000A.27
1491870000A.27
1491880000A.27
1491890000A.27
1491910000A.27
1491920000A.27
1491930000A.27
1491940000A.27
1491950000A.27
1491450000A.26
1491460000A.26
1491470000A.26
1491480000A.26
1492850000A.21
1492860000A.21
1492870000A.21
1492890000A.21
1492960000A.21
1492970000A.21
1492900000A.21
1492910000A.21
1492920000A.21
1492880000A.21
1492930000A.21
1492940000A.21
1492950000A.21
1498620000A.15
1498690000A.15
1498710000A.15
1498630000A.15
1498720000A.15
M
R
S
T
V
X.4
Page
LADEGERAET APG
LADEGERAET APG 120V
LADEGERAET APG 120V
LADEGERAET APG 120V
LADEGERAET EPG 45
LADEGERAET EPG 45
LADEGERAET EPG 45 120V
LADEGERAET EPG 45 120V
P
X
Order No.
B.21
B.29
B.24
B.21
B.29
B.15
B.29
B.15
Type
Order No.
Page
VPN/-240
VPN/-25
VPN/-300
VPN/-35
VPN/-50
VPN/-6
VPN/-70
VPN/-95
VRSHV/0,5-1,0
VRSHVI/0,5-1,0
VRSHVI/1,5-2,5
VRSHVI/1,5-2,5
VRSHVI/4,0-6,0
VRSTI/0,5-1,0
VRSTI/0,5-1,0
VRSTI/1,5-2,5
VRSTI/1,5-2,5
VRSTI/4,0-6,0
VSRI/0,1-0,5
VSRI/0,5-1,0
VSRI/1,5-2,5
VSRI/4,0-6,0
VSTI/0,1-0,5
VSTI/0,5-1,0
VSTI/1,5-2,5
VSTI/4,0-2,5
VSTN/0,1-0,5
VSTN/0,5-10
VSTN/1,5-2,5
VSTN/10
VSTN/-10
VSTN/120
VSTN/-120
VSTN/150
VSTN/-150
VSTN/16
VSTN/-16
VSTN/-185
VSTN/-2,5
VSTN/-240
VSTN/25
VSTN/-25
VSTN/35
VSTN/-35
VSTN/-4
VSTN/4-6
VSTN/50
VSTN/-50
VSTN/-6
VSTN/70
VSTN/-70
VSTN/95
VSTN/-95
VSTN-M0,5/-0,75
VSTN-M1/-1,5
VSTVI/0,5-1,0
VSTVI/1,5-2,5
1498730000A.15
1498640000A.15
1498740000A.15
1498650000A.15
1498660000A.15
1498610000A.15
1498670000A.15
1498680000A.15
1491980000A.30
1492020000A.30
1491990000A.30
1492030000A.30
1492010000A.30
1492040000A.29
1492070000A.30
1492080000A.30
1492050000A.29
1492060000A.29
1491490000A.25
1491510000A.25
1491520000A.25
1491530000A.25
1491540000A.25
1491550000A.25
1491560000A.25
1491570000A.25
1492980000A.21
1492990000A.21
1493010000A.21
1493030000A.21
1497130000A.11
1493110000A.21
1494780000A.11
1493120000A.21
1497380000A.11
1493040000A.21
1497140000A.11
1497390000A.11
1497350000A.11
1497400000A.11
1493050000A.21
1494730000A.11
1493060000A.21
1494740000A.11
1497370000A.11
1493020000A.21
1493070000A.21
1494750000A.11
1494720000A.11
1493080000A.21
1494760000A.11
1493090000A.21
1494770000A.11
1497330000A.11
1497340000A.11
1491770000A.28
1491780000A.28
WFSKHV/0,5-1,05
WFSKHV/1,5-2,5
1491960000A.29
1491970000A.29
W
1541050000 – 2015/2016
Type
1210000000
Page
1216230000 HBT 6,0 - 4,6 GE
A.31
1233330000 HBT 2,5 - 4,6 BL
1233340000 HBT 1,5 - 4,6 RT
A.31
A.31
1292870000 CTN 25 D5 ZERT
1292880000 CTI 6 G ZERT
B.10
B.8
1312440000 HBT 1,5 - 3,0 RT
1312450000 HBT 2,5 - 3,0 BL
1312470000 HBT 6,0 - 3,0 GE
A.31
A.31
A.31
1491260000KQIG-M6/-2,5
1491270000KQIG-M4/-6
1491280000KQIG-M5/-6
1491290000KQIG-M6/-6
1491310000KQIG-M8/-6
1491320000KQIG-M10/-6
1491330000KQIG-M5/-10
1491340000KQIG-M6/-10
1491350000KQIG-M6/-16
1491360000KQIG-M8/-16
1491370000KSI/0,1-0,5
1491380000KSI/0,5-1,0
1491390000KSI/1,5-2,5
1491410000KSI/1,5-2,5
1491420000KSI/4,0-6,0
1491430000KSI/-10
1491440000KSI/-16
1491450000VPLI/0,1-0,5
1491460000VPLI/0,5-1,0
1491470000VPLI/1,5-2,5
1491480000VPLI/4,0-6,0
1491490000VSRI/0,1-0,5
1491510000VSRI/0,5-1,0
1491520000VSRI/1,5-2,5
1491530000VSRI/4,0-6,0
1491540000VSTI/0,1-0,5
1491550000VSTI/0,5-1,0
1491560000VSTI/1,5-2,5
1491570000VSTI/4,0-2,5
1491580000VEI/1,5-2,5
1491590000VEI/4-6
1491610000VEI/-10
1491640000VFSKHI/05-1,0/285
1491650000VFSKHI/0,5-1,0/288
1491660000VFSKHI/0,5-1,0/485
1491670000VFSKHI/0,5-1,0/488
1491680000VFSKHI/0,5-1,0/638
1491690000VFSKHI/1,5-2,5/485
1491710000VFSKHI/1,5-2,5/488
1491720000VFSKHI/1,5-2,5/638
1491730000VFSKHI/1,5-2,5/285
1491740000VFSKHI/1,5-2,5/288
1491750000VFSKHI/4,0-6,0/638
1491760000VFSKHI/4,0-6,0/9512
1491770000VSTVI/0,5-1,0
1491780000VSTVI/1,5-2,5
1491790000FSKI/0,5-1,0/288
1491810000FSKI/0,5-1,0/488
1491820000FSKI/0,5-1,0/638
1491830000FSKI/1,5-2,5/638
1491840000FSKI/4,0-6,0/638
1491850000FSKI/1,5-2,5/488
1491860000VFSKHV/0,5-1,0/285
1491870000VFSKHV/0,5-1,0/288
1491880000VFSKHV/0,5-1,0/485
1491890000VFSKHV/0,5-1,0/488
1491910000VFSKHV/0,5-1,0/638
1491920000VFSKHV/1,5-2,5/485
1491930000VFSKHV/1,5-2,5/488
1491940000VFSKHV/1,5-2,5/638
1491950000VFSKHV/4,0-6,0/638
1491960000WFSKHV/0,5-1,05
1491970000WFSKHV/1,5-2,5
1491980000VRSHV/0,5-1,0
1491990000VRSHVI/1,5-2,5
1492010000VRSHVI/4,0-6,0
1492020000VRSHVI/0,5-1,0
1492030000VRSHVI/1,5-2,5
1492040000VRSTI/0,5-1,0
1492050000VRSTI/1,5-2,5
1492060000VRSTI/4,0-6,0
1492070000VRSTI/0,5-1,0
1492080000VRSTI/1,5-2,5
1492090000KQI-M2/-0,5
1492100000KQI-M3/-0,5
1492110000KQI-M4/-0,5
1492120000KQI-M5/-0,5
A.24
A.24
A.24
A.24
A.24
A.24
A.24
A.24
A.24
A.24
A.25
A.25
A.25
A.25
A.25
A.25
A.25
A.26
A.26
A.26
A.26
A.25
A.25
A.25
A.25
A.25
A.25
A.25
A.25
A.26
A.26
A.26
A.27
A.27
A.27
A.27
A.27
A.27
A.27
A.27
A.27
A.27
A.27
A.27
A.28
A.28
A.28
A.28
A.28
A.28
A.28
A.28
A.27
A.27
A.27
A.27
A.27
A.27
A.27
A.27
A.27
A.29
A.29
A.30
A.30
A.30
A.30
A.30
A.29
A.29
A.29
A.30
A.30
A.23
A.23
A.23
A.23
1230000000
1290000000
1310000000
1490000000
1541050000 – 2015/2016
Order No.
Type
1492130000KQI-M10/-1
1492140000KQI-M2/-1
1492150000KQI-M2,5/-1
1492170000KQI-M3/-1
1492180000KQI-M3,5/-1
1492190000KQI-M4/S/-1
1492200000KQI-M4/-1
1492210000KQI-M5/S/-1
1492220000KQI-M5/-1
1492230000KQI-M6/-1
1492240000KQI-M8/-1
1492250000KQI-M3/-2,5
1492270000KQI-M3,5/-2,5
1492280000KQI-M4/S/-2,5
1492290000KQI-M4/-2,5
1492300000KQI-M5/S/2,5
1492310000KQI-M5/-2,5
1492320000KQI-M6/-2,5
1492330000KQI-M8/-2,5
1492340000KQI-M10/-2,5
1492350000KQI-M12/-2,5
1492370000KQI-M4/-6
1492380000KQI-M5/-6
1492390000KQI-M6/-6
1492400000KQI-M8/-6
1492410000KQI-M10/-6
1492420000KQI-M12/-6
1492430000KQI-M5/-10
1492440000KQI-M6/-10
1492450000KQI-M8/-10
1492470000KQI-M10/-10
1492480000KQI-M5/-16
1492490000KQI-M6/-16
1492500000KQI-M8/-16
1492510000KQI-M10/-16
1492520000KQIG-M3/-1
1492530000KQIG-M3,5/-1
1492540000KQIG-M4/S/-1
1492550000KQIG-M4/-1
1492580000KQIG-M5/-1
1492590000KQIG-M6/-1
1492600000KQIG-M3/-2,5
1492610000KQIG-M3,5/-2,5
1492620000KQIG-M4/S/-2,5
1492630000KQIG-M4/-2,5
1492640000KQIG-M5/-2,5
1492650000KQNG-M5/-6
1492660000KQNG-M6/-6
1492670000KQNG-M8/-6
1492680000KQNG-M5/-10
1492690000KQNG-M6/-10
1492700000KQNG-M6/-16
1492710000KQNG-M8/-16
1492720000KSN/0,1-0,5
1492730000KSN/0,5-1,0
1492740000KSN/1,5-2,5
1492750000KSN/-2,5
1492770000KSN/-6,0
1492780000KSN/-10
1492790000KSN/-16
1492800000KSN/-25
1492810000KSN/-35
1492820000KSN/-50
1492830000KSN/-70
1492840000KSN/-95
1492850000VPLN/0,1-0,5
1492860000VPLN/0,5-1,0
1492870000VPLN/1,5-2,5
1492880000VPLN/4-6,0
1492890000VPLN/-10
1492900000VPLN/-16
1492910000VPLN/-25
1492920000VPLN/-35
1492930000VPLN/-50
1492940000VPLN/-70
1492950000VPLN/-95
1492960000VPLN/-120
1492970000VPLN/-150
1492980000VSTN/0,1-0,5
1492990000VSTN/0,5-10
1493010000VSTN/1,5-2,5
1493020000VSTN/4-6
1493030000VSTN/10
1493040000VSTN/16
1493050000VSTN/25
1493060000VSTN/35
1493070000VSTN/50
1493080000VSTN/70
1493090000VSTN/95
1493110000VSTN/120
1493120000VSTN/150
1493130000KQN-M12/-35
1493140000KQN-M16/-35
1493150000KQN-M8/-50
1493160000KQN-M10/-50
1493170000KQN-M12/-50
1493180000KQN-M16/-50
1493190000KQN-M6/-70
1493210000KQN-M8/-70
Page
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.23
A.24
A.24
A.24
A.24
A.24
A.24
A.24
A.24
A.24
A.24
A.24
A.19
A.19
A.19
A.19
A.19
A.19
A.19
A.20
A.20
A.20
A.20
A.20
A.20
A.20
A.20
A.20
A.20
A.20
A.20
A.21
A.21
A.21
A.21
A.21
A.21
A.21
A.21
A.21
A.21
A.21
A.21
A.21
A.21
A.21
A.21
A.21
A.21
A.21
A.21
A.21
A.21
A.21
A.21
A.21
A.21
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
Order No.
Type
1493220000KQN-M10/-70
1493230000KQN-M12/-70
1493240000KQN-M16/-70
1493250000KQN-M20/-70
1493260000KQN-M8/-95
1493270000KQN-M10/-95
1493280000KQN-M12/-95
1493290000KQN-M16/-95
1493310000KQN-M20/-95
1493320000KQN-M8/-120
1493330000KQN-M10/-120
1493340000KQN-M12/-120
1493350000KQN-M16/-120
1493360000KQN-M20/-120
1493370000KQN-M10/-150
1493380000KQN-M12/-150
1493390000KQN-M16/-150
1493410000KQN-M20/-150
1493420000KQN-M10/-185
1493430000KQN-M12/-185
1493440000KQN-M16/-185
1493450000KQN-M20/-185
1493460000KQN-M10/-240
1493470000KQN-M12/-240
1493480000KQN-M16/-240
1493490000KQN-M16/-25
1493510000KQN-M6/-50
1493520000KQN-M20/-35
1493530000KQN-M20/-50
1493540000KQNG-M3/-1
1493550000KQNG-M3,5/-1
1493560000KQNG-M4/S/-1
1493570000KQNG-M4/-1
1493580000KQNG-M5/-1
1493590000KQNG-M6/-1
1493600000KQNG-M3/-2,5
1493610000KQNG-M3,5/-2,5
1493620000KQNG-M4/S/-2,5
1493630000KQNG-M4/-2,5
1493640000KQNG-M5/-2,5
1493650000KQNG-M6/-2,5
1493660000KQNG-M4/-6
1493670000KQN-M2/-0,5
1493680000KQN-M3/-0,5
1493690000KQN-M4/-0,5
1493700000KQN-M5/-0,5
1493710000KQN-M10/-1
1493720000KQN-M2/-1
1493730000KQN-M2,5/-1
1493740000KQN-M3/-1
1493750000KQN-M3,5/-1
1493760000KQN-M4/S/-1
1493770000KQN-M4/-1
1493780000KQN-M5/S/-1
1493790000KQN-M5/-1
1493800000KQN-M6/-1
1493810000KQN-M8/-1
1493820000KQN-M3/-2,5
1493830000KQN-M3,5/-2,5
1493840000KQN-M4/S/-2,5
1493850000KQN-M4/-2,5
1493870000KQN-M5/S/-2,5
1493890000KQN-M5/-2,5
1493900000KQN-M6/-2,5
1493910000KQN-M8/-2,5
1493930000KQN-M10/-2,5
1493940000KQN-M12/-2,5
1493950000KQN-M4/-6
1493960000KQN-M5/-6
1493970000KQN-M6/-6
1493980000KQN-M8/-6
1493990000KQN-M10/-6
1494000000KQN-M12/-6
1494010000KQN-M4/-10
1494020000KQN-M5/-10
1494030000KQN-M6/-10
1494040000KQN-M8/-10
1494050000KQN-M10/-10
1494060000KQN-M12/-10
1494070000KQN-M5/-16
1494080000KQN-M6/-16
1494090000KQN-M8/-16
1494100000KQN-M10/-16
1494110000KQN-M12/-16
1494120000KQN-M5/-25
1494130000KQN-M6/-25
1494140000KQN-M8/-25
1494150000KQN-M10/-25
1494160000KQN-M12/-25
1494170000KQN-M6/-35
1494180000KQN-M8/-35
1494190000KQN-M10/-35
1494340000 KRN-M10/-240 S
1494350000 KRN-M12/-240 S
1494370000 KRN-M16/-240 S
1494380000 KRN-M10/300 S
1494390000 KRN-M12/-300 S
1494400000 KRN-M16/-300 S
1494410000 KRN-M6/-120 S
Page
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.19
A.19
A.19
A.19
A.19
A.19
A.19
A.19
A.19
A.19
A.19
A.19
A.19
A.17
A.17
A.17
A.17
A.17
A.17
A.17
A.17
A.17
A.17
A.17
A.17
A.17
A.17
A.17
A.17
A.17
A.17
A.17
A.17
A.17
A.17
A.17
A.17
A.17
A.17
A.17
A.17
A.17
A.17
A.17
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.18
A.7
A.7
A.7
A.7
A.7
A.7
A.7
Order No.
Type
1494420000 KRN-M8/-120 S
1494430000 KRN-M6/-95 S
1494440000 KRN-M6/-150 S
1494450000 KWN-M10/-120 90
1494470000 KWN-M12/-120 90
1494480000 KWN-M16/-120 90
1494490000 KWN-M8/-150 90
1494500000 KWN-M10/150 90
1494510000 KWN-M12/-150 90
1494520000 KWN-M16/-150 90
1494530000 KWN-M20/-150 90
1494540000 KWN-M10/-185 90
1494550000 KWN-M12/-185 90
1494570000 KWN-M16/-185 90
1494580000 KWN-M20/-185 90
1494590000 KWN-M10/-240 90
1494610000 KWN-M12/-240 90
1494620000 KWN-M16/-240 90
1494630000 KWN-M20/-240 90
1494640000 KWN-M14/-35 90
1494650000 KWN-M14/50 90
1494660000 KWN-M14/-70 90
1494670000 KWN-M14/-95 90
1494680000 KWN-M8/-120 90
1494690000 KWN-M16/-35 90
1494710000 KWN-M20/-50 90
1494720000VSTN/-6
1494730000VSTN/-25
1494740000VSTN/-35
1494750000VSTN/-50
1494760000VSTN/-70
1494770000VSTN/-95
1494780000VSTN/-120
1494790000 KRN-M6/-35 S
1494810000 KRN-M8/-35 S
1494820000 KRN-M6/-50 S
1494830000 KRN-M8/-50 S
1494840000 KRN-M10/-50 S
1494850000 KRN-M6/-70 S
1494860000 KRN-M8/-70 S
1494870000 KRN-M10/-70 S
1494880000 KRN-M12/-70 S
1494890000 KRN-M8/-95 S
1494900000 KRN-M10/-95 S
1494910000 KRN-M12/-95 S
1494920000 KRN-M10/-120 S
1494930000 KRN-M12/-120 S
1494940000 KRN-M8/-150 S
1494950000 KRN-M10/-150 S
1494970000 KRN-M12/-150 S
1494980000 KRN-M10/-185 S
1494990000 KRN-M12/-185 S
1495000000 KRN-M16/-185 S
1495010000KRN-M3/-0,75
1495020000KRN-M4/-0,75
1495030000KRN-M5/-0,75
1495040000KRN-M3/-1,5
1495050000KRN-M4/-1,5
1495070000KRN-M5/-1,5
1495080000KRN-M6/-1,5
1495090000KRN-M4/-2,5
1495100000KRN-M5/-2,5
1495110000KRN-M6/-2,5
1495120000KRN-M8/-2,5
1495130000KRN-M4/-4
1495140000KRN-M5/-4
1495150000KRN-M6/-4
1495170000KRN-M8/-4
1495180000 KWN-M3/-0,75 90
1495190000 KWN-M4/-0,75 90
1495200000 KWN-M5/-0,75 90
1495210000 KWN-M3/-1,5 90
1495220000 KWN-M4/-1,5 90
1495230000 KWN-M5/-1,5 90
1495240000 KWN-M6/-1,5 90
1495250000 KWN-M4/-2,5 90
1495270000 KWN-M5/-2,5 90
1495280000 KWN-M6/-2,5 90
1495290000 KWN-M8/-2,5 90
1495300000 KWN-M4/-4 90
1495310000 KWN-M5/-4 90
1495320000 KWN-M6/-4 90
1495330000 KWN-M8/-4 90
1495340000 KWN-M10/-185 45
1495350000 KWN-M12/-185 45
1495370000 KWN-M16/-185 45
1495380000 KWN-M20/-185 45
1495400000 KWN-M12/-240 45
1495410000 KWN-M16/-240 45
1495420000 KWN-M20/-240 45
1495430000KRN-M10/-185
1495440000KRN-M12/-185
1495450000KRN-M16/-185
1495470000KRN-M20/-185
1495480000KRN-M8/-240
1495490000KRN-M10/-240
1495500000KRN-M12/-240
1495510000KRN-M16/-240
1495520000KRN-M20/-240
Page
A.7
A.7
A.7
A.9
A.9
A.9
A.9
A.9
A.9
A.9
A.9
A.9
A.9
A.9
A.9
A.9
A.9
A.9
A.9
A.8
A.9
A.9
A.9
A.9
A.8
A.9
A.11
A.11
A.11
A.11
A.11
A.11
A.11
A.7
A.7
A.7
A.7
A.7
A.7
A.7
A.7
A.7
A.7
A.7
A.7
A.7
A.7
A.7
A.7
A.7
A.7
A.7
A.7
A.5
A.5
A.5
A.5
A.5
A.5
A.5
A.5
A.5
A.5
A.5
A.5
A.5
A.5
A.5
A.8
A.8
A.8
A.8
A.8
A.8
A.8
A.8
A.8
A.8
A.8
A.8
A.8
A.8
A.8
A.10
A.10
A.10
A.10
A.10
A.10
A.10
A.6
A.6
A.6
A.6
A.6
A.6
A.6
A.6
A.6
Index / Order No.
Order No.
X
X.5
Index / Order No.
Order No.
X
X.6
Type
1495530000KRN-M10/-300
1495540000KRN-M12/-300
1495550000KRN-M16/-300
1495570000KRN-M12/-70
1495580000KRN-M16/-70
1495590000KRN-M20/-70
1495600000KRN-M8/-95
1495610000KRN-M10/-95
1495620000KRN-M12/-95
1495630000KRN-M16/-95
1495640000KRN-M20/-95
1495650000KRN-M10/-120
1495670000KRN-M12/-120
1495680000KRN-M16/-120
1495690000KRN-M20/-120
1495700000KRN-M8/-150
1495710000KRN-M10/-150
1495720000KRN-M12/-150
1495730000KRN-M16/-150
1495740000KRN-M20/-150
1495750000KRN-M14/-50
1495770000KRN-M14/-70
1495780000KRN-M14/-95
1495790000KRN-M8/-120
1495800000KRN-M14/-120
1495810000KRN-M14/-150
1495820000KRN-M6/-95
1495830000KRN-M5/-25
1495840000KRN-M20/-50
1495850000 KWN-M6/-25 90
1495870000 KWN-M8/-25 90
1495880000 KWN-M10/-25 90
1495890000 KWN-M12/-25 90
1495900000 KWN-M14/-25 90
1495910000 KWN-M6/-35 90
1495920000 KWN-M8/-35 90
1495930000 KWN-M10/-35 90
1495940000 KWN-M12/-35 90
1495950000 KWN-M6/-50 90
1495970000 KWN-M8/-50 90
1495980000 KWN-M10/-50 90
1495990000 KWN-M12/-50 90
1496000000 KWN-M16/-50 90
1496010000 KWN-M6/-70 90
1496020000 KWN-M8/-70 90
1496030000 KWN-M10/-70 90
1496040000 KWN-M12/-70 90
1496050000 KWN-M16/-70 90
1496070000 KWN-M20/-70 90
1496080000 KWN-M8/-95 90
1496090000 KWN-M10/-95 90
1496100000 KWN-M12/-95 90
1496110000 KWN-M16/-95 90
1496120000KWN-M5/-6
1496130000 KWN-M6/-6 90
1496140000 KWN-M8/-6 90
1496150000 KWN-M10/-6 90
1496170000 KWN-M12/-6 90
1496180000 KWN-M6/-25 45
1496190000 KWN-M8/-25 45
1496200000 KWN-M10/-25 45
1496210000 KWN-M12/-25 45
1496220000 KWN-M6/-35 45
1496230000 KWN-M8/-35 45
1496240000 KWN-M10/-35 45
1496250000 KWN-M12/-35 45
1496270000 KWN-M6/-50 45
1496280000 KWN-M8/-50 45
1496290000 KWN-M10/-50 45
1496300000 KWN-M12/-50 45
1496310000 KWN-M8/-70 45
1496320000 KWN-M10/-70 45
1496330000 KWN-M12/-70 45
1496340000 KWN-M8/-95 45
1496350000 KWN-M10/-95 45
1496370000 KWN-M12/-95 45
1496380000 KWN-M16/-95 45
1496390000 KWN-M8/-120 45
1496400000 KWN-M10/-120 45
1496410000 KWN-M12/-120 45
1496420000 KWN-M16/-120 45
1496430000 KWN-M8/-150 45
1496440000 KWN-M10/-150 45
1496450000 KWN-M16/-150 45
1496470000KWN-M16/-150
1496480000 KWN-M20/-150 45
1496490000KRN-M6/-25
1496500000KRN-M8/-25
1496510000KRN-M10/-25
1496520000KRN-M12/-25
1496530000KRN-M14/-25
1496540000KRN-M6/-35
1496550000KRN-M8/-35
1496570000KRN-M10/-35
1496580000KRN-M12/-35
1496590000KRN-M6/-50
1496600000KRN-M8/-50
1496610000KRN-M10/-50
1496620000KRN-M12/-50
Page
A.6
A.6
A.6
A.6
A.6
A.6
A.6
A.6
A.6
A.6
A.6
A.6
A.6
A.6
A.6
A.6
A.6
A.6
A.6
A.6
A.6
A.6
A.6
A.6
A.6
A.6
A.6
A.5
A.6
A.8
A.8
A.8
A.8
A.8
A.8
A.8
A.8
A.8
A.9
A.9
A.9
A.9
A.9
A.9
A.9
A.9
A.9
A.9
A.9
A.9
A.9
A.9
A.9
A.8
A.8
A.8
A.8
A.8
A.10
A.10
A.10
A.10
A.10
A.10
A.10
A.10
A.10
A.10
A.10
A.10
A.10
A.10
A.10
A.10
A.10
A.10
A.10
A.10
A.10
A.10
A.10
A.10
A.10
A.10
A.10
A.10
A.5
A.5
A.5
A.5
A.5
A.6
A.6
A.6
A.6
A.6
A.6
A.6
A.6
Order No.
Type
1496630000KRN-M16/-50
1496640000KRN-M6/-70
1496650000KRN-M8/-70
1496670000KRN-M10/-70
1496810000 KWN-M5/-10 45
1496820000 KWN-M6/-10 45
1496830000 KWN-M8/-10 45
1496840000 KWN-M10/-10 45
1496850000 KWN-M5/-16 45
1496870000 KWN-M6/-16 45
1496880000 KWN-M8/-16 45
1496890000 KWN-M10/-16 45
1496900000KRN-M4/-10
1496910000KRN-M5/-10
1496920000KRN-M6/-10
1496930000KRN-M8/-10
1496940000KRN-M10/-10
1496950000KRN-M12/-10
1496970000KRN-M5/-16
1496980000KRN-M6/-16
1496990000KRN-M8/-16
1497000000KRN-M10/-16
1497010000KRN-M12/-16
1497020000 KWN-M5/-10 90
1497030000 KWN-M6/-10 90
1497040000 KWN-M8/-10 90
1497050000 KWN-M10/-10 90
1497070000 KWN-M12/-10 90
1497080000 KWN-M5/-16 90
1497090000 KWN-M6/16 90
1497100000 KWN-M8/-16 90
1497110000 KWN-M10/-16 90
1497120000 KWN-M12/-16 90
1497130000VSTN/-10
1497140000VSTN/-16
1497150000KRN-M4/-6
1497170000KRN-M5/-6
1497180000KRN-M6/-6
1497190000KRN-M8/-6
1497200000KRN-M10/-6
1497210000KRN-M12/-6
1497220000 KWN-M5/-6 90
1497240000KRN-M20/-300
1497250000KRN-M14/-185
1497270000KRN-M14/-240
1497280000KRN-M14/-300
1497290000KRN-M8/-185
1497300000 KWN-M12/-300 90
1497310000 KWN-M16/-300 90
1497320000 KWN-M20/-300 90
1497330000VSTN-M0,5/-0,75
1497340000VSTN-M1/-1,5
1497350000VSTN/-2,5
1497370000VSTN/-4
1497380000VSTN/-150
1497390000VSTN/-185
1497400000VSTN/-240
1497840000KP-M5/-6
1497850000KP-M6/-6
1497860000KP-M8/-6
1497870000KP-M5/-10
1497880000KP-M6/-10
1497890000KP-M8/-10
1497910000KP-M10/-10
1497920000KP-M5/-16
1497930000KP-M6/-16
1497940000KP-M8/-16
1497950000KP-M10/-16
1497960000KP-M12/-16
1497970000KP-M6/-25
1497980000KP-M8/-25
1497990000KP-M10/-25
1498000000KP-M12/-25
1498010000KP-M16/-25
1498020000KP-M6/-35
1498030000KP-M8/-35
1498040000KP-M10/-35
1498050000KP-M12/35
1498060000KP-M16/-35
1498070000KP-M8/-50
1498080000KP-M10/-50
1498090000KP-M12/-50
1498110000KP-M16/-50
1498120000KP-M20/-50
1498130000KP-M8/-70
1498140000KP-M10/-70
1498150000KP-M12/-70
1498160000KP-M16/-70
1498170000KP-M20/-70
1498180000KP-M8/-95
1498190000KP-M10/-95
1498210000KP-M12/-95
1498220000KP-M16/-95
1498230000KP-M20/-95
1498240000KP-M10/-120
1498250000KP-M12/-120
1498270000KP-M16/-120
1498280000KP-M20/-120
1498290000KP-M8/-150
Page
A.6
A.6
A.6
A.6
A.10
A.10
A.10
A.10
A.10
A.10
A.10
A.10
A.5
A.5
A.5
A.5
A.5
A.5
A.5
A.5
A.5
A.5
A.5
A.8
A.8
A.8
A.8
A.8
A.8
A.8
A.8
A.8
A.8
A.11
A.11
A.5
A.5
A.5
A.5
A.5
A.5
A.8
A.6
A.6
A.6
A.6
A.6
A.9
A.9
A.9
A.11
A.11
A.11
A.11
A.11
A.11
A.11
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.13
A.14
A.14
A.14
A.14
A.14
Order No.
Type
Page
1498310000KP-M10/-150
1498320000KP-M12/-150
1498330000KP-M16/-150
1498340000KP-M20/-150
1498350000KP-M10/-185
1498360000KP-M12/-185
1498370000KP-M16/-185
1498380000KP-M20/-185
1498390000KP-M10/-240
1498410000KP-M12/-240
1498420000KP-M16/-240
1498430000KP-M20/-240
1498440000KP-M10/-300
1498450000KP-M12/-300
1498460000KP-M16/-300
1498470000KP-M20/-300
1498480000KP-M8/-120
1498490000KP-M14/-120
1498510000KP-M6/-50
1498520000KP-M14/-95
1498530000KP-M14/-240
1498540000KP-M8/-185
1498550000KP-M14/-300
1498560000KP-M14/-70
1498570000KP-M14/-50
1498580000KP-M14/-150
1498590000KP-M14/-185
1498610000VPN/-6
1498620000VPN/-10
1498630000VPN/-16
1498640000VPN/-25
1498650000VPN/-35
1498660000VPN/-50
1498670000VPN/-70
1498680000VPN/-95
1498690000VPN/-120
1498710000VPN/-150
1498720000VPN/-185
1498730000VPN/-240
1498740000VPN/-300
A.14
A.14
A.14
A.14
A.14
A.14
A.14
A.14
A.14
A.14
A.14
A.14
A.14
A.14
A.14
A.14
A.14
A.14
A.13
A.13
A.14
A.14
A.14
A.13
A.13
A.14
A.14
A.15
A.15
A.15
A.15
A.15
A.15
A.15
A.15
A.15
A.15
A.15
A.15
A.15
1500440000
1500450000
1500470000
1500480000
1500490000
1500500000
1500520000
1500530000
1500540000
1500550000
1500580000
1500590000
1500600000
1500620000
1500630000
1500640000
1500650000
1500670000
1500680000
1500690000
1500700000
1500720000
1500730000
1500740000
1500750000
1500770000
1500780000
1500790000
1500800000
1500820000
1500830000
1500840000
1500840000
1500850000
1500870000
1500880000
1500890000
1500900000
1500920000
1500930000
1500940000
1500950000
1500970000
1500980000
1500990000
1501000000
1501020000
1501030000
1501040000
1501050000
1501070000
1501170000
1501180000
1501190000
1501200000
1501220000
B.11
B.12
B.11
B.12
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.14
B.15
B.29
B.15
B.17
B.17
B.17
B.17
B.17
B.17
B.17
B.17
B.17
B.17
B.17
B.17
B.17
B.17
B.17
B.17
B.17
B.17
B.17
B.17
B.18
B.18
B.18
1500000000
PZ RK 6/70
PZ RK 10/120
PZ PK 6/70
PZ PK 10/120
ES MTR35 WM 6
ES MTR35 WM 10
ES MTR35 WM 16
ES MTR35 WM 25
ES MTR35 WM 35
ES MTR35 WM 50
ES MTR35 HEX 6
ES MTR35 HEX 10
ES MTR35 HEX 16
ES MTR35 HEX 25
ES MTR35 HEX 35
ES MTR35 HEX 50
ES MTR35 DIN 6
ES MTR35 DIN 10
ES MTR35 DIN 16
ES MTR35 DIN 25
ES MTR35 DIN 35
ES MTR35 ISO 10
ES MTR35 ISO 16
ES MTR35 ISO 25
ES MTR35 AEH 6
ES MTR35 AEH 10
ES MTR35 AEH 16
ES MTR35 AEH 25
ES MTR35 AEH 35
ES MTR35 AEH 50
EPG 45
AKKU EPG 45
AKKU EPG 45
ES MTR110 WM 6
ES MTR110 WM 10/70
ES MTR110 WM 16/35
ES MTR110 WM 25/50
ES MTR110 WM 95
ES MTR110 WM 120
ES MTR110 HEX 6
ES MTR110 HEX 10/70
ES MTR110 HEX 16/35
ES MTR110 HEX 25/50
ES MTR110 HEX 95
ES MTR110 HEX 120
ES MTR110 ISO 10
ES MTR110 ISO 16
ES MTR110 AEH 6
ES MTR110 AEH 10
ES MTR110 AEH 16
ES MTR110 AEH 25
ES MTR110 AEH 35
ES MTR110 AEH 50
ES MTR110 RUND 10
ES MTR110 RUND 16
ES MTR110 RUND 25/35
Order No.
1501230000
1501240000
1501250000
1501270000
1501280000
1501290000
1501320000
1501330000
1501340000
1501350000
1501370000
1501380000
1501390000
1501400000
1501420000
1501430000
1501440000
1501450000
1501470000
1501480000
1501490000
1501500000
1501520000
1501530000
1501540000
1501550000
1501570000
1501580000
1501590000
1501600000
1501620000
1501630000
1501640000
1501650000
1501670000
1501680000
1501690000
1501700000
1501720000
1501730000
1501740000
1501750000
1501770000
1501780000
1501790000
1501800000
1501820000
1501830000
1501840000
1501850000
1501870000
1501880000
1501890000
1501900000
1501920000
1501930000
1501940000
1501970000
1501980000
1501990000
1502000000
1502020000
1502030000
1502040000
1502050000
1502070000
1502080000
1502090000
1502100000
1502120000
1502130000
1502140000
1502140000
1502140000
1502170000
1502170000
1502170000
1502190000
1502250000
1502270000
1502280000
1502290000
1502300000
1502320000
1502330000
1502340000
1502370000
1502380000
1502390000
1502420000
1502430000
1502440000
1502470000
1502480000
1502490000
1502500000
1502520000
1502530000
1502540000
Type
Page
ES MTR110 RUND 35/50
ES MTR110 RUND 50/70
ES MTR110 RUND 70/95
ES MTR110 RUND 95/120
ES MTR110 RUND 120/150
ES MTR110 DIN 6
ES MTR110 DIN 10
ES MTR110 DIN 16
ES MTR110 DIN 25
ES MTR110 DIN 35
ES MTR110 DIN 50
ES MTR110 DIN 70
APG 55
HPG 55
ES APG/HPG55 WM 6
ES APG/HPG55 WM10/70
ES APG/HPG55 WM 16/35
ES APG/HPG55 WM 25/50
ES APG/HPG55 WM 95
ES APG/HPG55 WM 120
ES APG/HPG55 WM 150
ES APG/HPG55 WM 185
ES APG/HPG55 WM 240
ES APG/HPG55 HEX 6
ES APG/HPG55 HEX 10/70
ES APG/HPG55 HEX 16/35
ES APG/HPG55 HEX 25/50
ES APG/HPG55 HEX 95
ES APG/HPG55 HEX 120
ES APG/HPG55 HEX 150
ES APG/HPG55 HEX 185
ES APG/HPG55 DIN 6
ES APG/HPG55 DIN 10
ES APG/HPG55 DIN 16
ES APG/HPG55 DIN 25
ES APG/HPG55 DIN 35
ES APG/HPG55 DIN 50
ES APG/HPG55 DIN 70
ES APG/HPG55 DIN 95
ES APG/HPG55 DIN 120
ES APG/HPG55 ISO 10
ES APG/HPG55 ISO 16
ES APG/HPG55 ISO 25
ES APG/HPG55 ISO 35
ES APG/HPG55 ISO 50
ES APG/HPG80 DIN 185
ES APG/HPG80 DIN 240
ES APG/HPG80 ISO 10
ES APG/HPG80 ISO 16
ES APG/HPG80 RD 10
ES APG/HPG80 RD 16
ES APG/HPG80 RD 25/35
ES APG/HPG80 RD 35/50
ES APG/HPG80 RD 50/70
ES APG/HPG80 RD 70/95
ES APG/HPG80 RD 95/120
ES APG/HPG80 RD 120/150
ES APG/HPG80 RD 150/185
ES APG/HPG80 RD 185/240
ES APG/HPG80 RD 240/300
ES APG/HPG80 AEH 10
ES APG/HPG80 AEH 16
ES APG/HPG80 AEH 25
ES APG/HPG80 AEH35
ES APG/HPG80 AEH 50
ES APG/HPG80 AEH 70
ES APG/HPG80 AEH 95
ES APG/HPG80 AEH 120
ES APG/HPG80 AEH 150
ES APG/HPG80 AEH 185
ES APG/HPG80 AEH 240
AKKU APG
AKKU APG
AKKU APG
LADEGERAET APG
LADEGERAET APG
LADEGERAET APG
AKT 50
ES APG/HPG55 ISO 70
ES APG/HPG55 AEH 6
ES APG/HPG55 AEH 10
ES APG/HPG55 AEH 16
ES APG/HPG55 AEH 25
ES APG/HPG55 AEH35
ES APG/HPG55 AEH 50
ES APG/HPG55 AEH 70
ES APG/HPG55 AEH 95
ES APG/HPG55 AEH 120
APG 80
HPG 80
ES APG/HPG80 WM 6
ES APG/HPG80 WM10
ES APG/HPG80 WM 16
ES APG/HPG80 WM 25
ES APG/HPG80 WM 35
ES APG/HPG80 WM 50
ES APG/HPG80 WM 70
ES APG/HPG80 WM 95
ES APG/HPG80 WM 120
B.18
B.18
B.18
B.18
B.18
B.17
B.17
B.17
B.17
B.17
B.17
B.17
B.21
B.22
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.26
B.26
B.26
B.26
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.27
B.29
B.24
B.21
B.29
B.24
B.21
B.28
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.23
B.24
B.25
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
1541050000 – 2015/2016
1502550000
1502570000
1502580000
1502590000
1502600000
1502620000
1502630000
1502640000
1502650000
1502670000
1502680000
1502690000
1502700000
1502720000
1502730000
1502740000
1502750000
1502780000
1502790000
1502800000
1502820000
1502830000
1502840000
1502850000
1502870000
1502880000
1502890000
1502900000
1508780000
1508790000
1508820000
1509370000
1509370000
1509380000
1509380000
1509390000
1509390000
1509390000
Type
ES APG/HPG80 WM 150
ES APG/HPG80 WM 185
ES APG/HPG80 WM 240
ES APG/HPG80 WM 300
ES APG/HPG80 HEX 6
ES APG/HPG80 HEX 10
ES APG/HPG80 HEX 16
ES APG/HPG80 HEX 25
ES APG/HPG80 HEX 35
ES APG/HPG80 HEX 50
ES APG/HPG80 HEX 70
ES APG/HPG80 HEX 95
ES APG/HPG80 HEX 120
ES APG/HPG80 HEX 150
ES APG/HPG80 HEX 185
ES APG/HPG80 HEX 240
ES APG/HPG80 HEX 300
ES APG/HPG80 HEX 300AL
ES APG/HPG80 DIN 120
ES APG/HPG80 DIN 150
ES APG/HPG80 DIN 6
ES APG/HPG80 DIN 10
ES APG/HPG80 DIN 16
ES APG/HPG80 DIN 25
ES APG/HPG80 DIN 35
ES APG/HPG80 DIN 50
ES APG/HPG80 DIN 70
ES APG/HPG80 DIN 95
EPG 45 120V
APG 55 120V
APG 80 120V
LADEGERAET EPG 45
LADEGERAET EPG 45
LADEGERAET EPG 45 120V
LADEGERAET EPG 45 120V
LADEGERAET APG 120V
LADEGERAET APG 120V
LADEGERAET APG 120V
9000000000
Page
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.26
B.15
B.21
B.24
B.29
B.15
B.29
B.15
B.29
B.24
B.21
9006120000 CTI 6
9006230000 CTN 25 D5
B.8
B.10
9014100000
9014400000
9014610000
9016180000
9016190000
9016200000
9016210000
9016220000
9016230000
9016240000
9016250000
9016260000
9016270000
9016280000
9016290000
9016370000
9016380000
9016390000
9016440000
9017170000
9017250000
9017270000
9017290000
9017380000
9017430000
9017500000
9017500000
9017500000
9017840000
9018020000
9018020000
9018020000
9018040000
HTN 21 M. AN
HTI 15
HTN 21
EINSATZPAAR ISO 10QMM
EINSATZPAAR ISO 16QMM
EINSATZPAAR ISO 25QMM
EINSATZPAAR ISO 35QMM
EINSATZPAAR ISO 50QMM
EINSATZPAAR ISO 70QMM
EINSATZPAAR ISO 95QMM
EINSATZPAAR ISO120QMM
RUNDPRESSEINS 25SM35SE
RUNDPRESSEINS 35SM50SE
RUNDPRESSEINS 50SM70SE
RUNDPRESSEINS 70SM95SE
RUNDPRESSEINS 95SM120SE
RUNDPRESSEINS 120SM150SE
RUNDPRESSEINS 150SM185SE
RUNDPRESSEINS 185SM240SE
HTN 21 M. AN ZERT
MTR 160
TRAGETASCHE MTR 160
CTI 6 ZERT
HTN 21 ZERT
HTI 15 ZERT
MTR 35
MTR 35
MTR 35
TRAGEKASTEN MTR 35
MTR 110
MTR 110
MTR 110
TRAGEKASTEN MTR 110
B.9
B.9
B.9
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.9
B.19
B.19
B.8
B.9
B.9
B.13
B.5
B.4
B.13
B.16
B.5
B.4
B.16
9020900000
9020910000
9020920000
9020930000
9020940000
9020950000
9020960000
9020970000
9020980000
9020990000
9021000000
9021300000
9021310000
9021320000
9021330000
9021340000
9021350000
EINSATZ MTR 160 10HEX
EINSATZ MTR 160 16HEX
EINSATZ MTR 160 25HEX
EINSATZ MTR 160 35HEX
EINSATZ MTR 160 50HEX
EINSATZ MTR 160 70HEX
EINSATZ MTR 160 95HEX
EINSATZ MTR 160 120HEX
EINSATZ MTR 160 150HEX
EINSATZ MTR 160 185HEX
EINSATZ MTR 160 240HEX
EINSATZ MTR 160 10DIN
EINSATZ MTR 160 16DIN
EINSATZ MTR 160 25DIN
EINSATZ MTR 160 35DIN
EINSATZ MTR 160 50DIN
EINSATZ MTR 160 70DIN
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
9010000000
9020000000
1541050000 – 2014/2015
Order No.
Type
9021360000 EINSATZ MTR 160 95DIN
9021370000 EINSATZ MTR 160 120DIN
9021380000 EINSATZ MTR 160 150DIN
9021390000 MTR 300
9021420000 TRAGEKASTEN MTR 300
9021430000EINSATZP.HEX10QMM
9021440000EINSATZP.HEX16QMM
9021450000EINSATZP.HEX25QMM
9021460000EINSATZP.HEX35QMM
9021470000EINSATZP.HEX50QMM
9021480000EINSATZP.HEX70QMM
9021750000 EINSATZ MTR 160 10+25WM
9021760000 EINSATZ MTR 160 16+35WM
9021770000 EINSATZ MTR 160 50WM
9021780000 EINSATZ MTR 160 70WM
9021790000 EINSATZ MTR 160 95WM
9021800000 EINSATZ MTR 160 120WM
9021810000 EINSATZ MTR 160 150WM
9021820000 EINSATZ MTR 160 185WM
9021830000 EINSATZ MTR 160 240WM
9022290000EINSATZP.HEX95QMM
9022300000EINSATZP.HEX120QMM
9022310000EINSATZP.HEX150QMM
9022320000EINSATZP.HEX185QMM
9022330000EINSATZP.HEX240QMM
9022340000EINSATZP.HEX300QMM
9022350000 GESENK 10+70QMM
9022360000 GESENK 16+35QMM
9022370000 GESENK 25+50QMM
9022380000 GESENK 95QMM
9022390000 GESENK 120QMM
9022400000 GESENK 150QMM
9022990000 STEMPEL 10-70QMM
9023110000 STEMPEL 95-150QMM
9024010000 EINSATZP.WM 10+25QMM
9024400000 EINSATZP.WM 16+35QMM
9024410000 EINSATZP.WM 50QMM
9024420000 EINSATZP.WM 70QMM
9024430000 EINSATZP.WM 95QMM
9025210000 EINSATZP.WM 120QMM
9025220000 EINSATZP.WM 150QMM
9025230000 EINSATZP.WM 185QMM
9028020000 EINSATZP.WM 240QMM
9200000000
9202850000 CTI 6 G
Page
B.20
B.20
B.20
B.19
B.19
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
B.20
Index / Order No.
Order No.
B.8
X
X.7
Index
X
X.8
1541050000 – 2015/2016
Index
X
1541050000 – 2015/2016
X.9
Index
X
X.10
1541050000 – 2015/2016
Index
X
1541050000 – 2015/2016
X.11
Index
X
X.12
1541050000 – 2015/2016
Index
X
1541050000 – 2015/2016
X.13
Addresses worldwide
Addresses worldwide
Let’s connect.
AE
United Arab Emirates
BR
Weidmuller Middle East FZE
Warehouse Q3-79
SAIF-Zone
P.O. BOX 8591
Sharjah
Tel. +971 65572723
Fax +971 65572724
[email protected]
AO
Angola
Please contact
Phambili Interface
South Africa
AR
Argentina
CPI SA
Bauness 2660
C1431DOF Buenos Aires
Tel. +54 11 4523 8008
Fax +54 11 4522 0546
[email protected]
www.cpi.com.ar
AT
AU
AZ
BA
Austria
Weidmüller GmbH
IZ NOE Süd Straße 2b, Obj
M 59
2355 Wiener Neudorf
Tel. +43 2236 67080
Fax +43 2236 6708-899
[email protected]
www.weidmueller.com
Australia
Weidmüller Pty. Ltd.
PO BOX 6944
Huntingwood 2148
Huntingwood Drive 43
Huntingwood NSW 2148
Tel. +61 2 9671 9999
Fax +61 2 9671 9911
[email protected]
www.weidmuller.com.au
Azerbaijan
Representative Office
Rashad Mahmudov
Demirchi Tower, 4th floor
37, Khojali ave.
AZ 1025 Baku
Tel. +994 12 488 80 36
Fax +994 12 488 80 37
rashad.mahmudov@
weidmueller.com
BW
Botswana
Please contact
Phambili Interface
South Africa
BY
Belarus
TECHNIKON Ltd.
Nezavisimosti pr. 177-9
220125 Minsk
Tel. +375 17 393-11-77
Fax +375 17 3930080
[email protected]
CA
CG
CH
CL
Bosnia and Herzegovina
Please contact
our Representative Office
Weidmüller Interface GmbH
& Co. KG
Serbia
or
BIG electric d.o.o
Mladena Stojanovića 117A
78000 Banja Luka
Tel. +387 51926277
Fax +387 51926277
[email protected]
www.bigelectric.ba
X
X.14
BE
Belgium
Weidmüller Benelux B. V.
Mechelsesteenweg 519 bus
6 en 7
1930 Nossegem
Tel. +32 2 752 40 70
Fax +32 2 751 36 06
[email protected]
www.weidmueller.be
BG
Bulgaria
Weid-Bul EOOD
Bul. „Kliment Ohridski“ 13
1756 Sofia
Tel. +359 2 963 2560
Fax +359 2 963 1098
[email protected]
www.weidbul.com
BH
Bahrain
Khayber Trading Company
P.O Box 1976
Manama
Tel. +973 720747
Fax +973 720331
[email protected]
Brazil
Weidmuller Conexel do Brasil
Conexões Elétricas Ltda.
Av. Presidente Juscelino, 642
- Piraporinha
Diadema, São Paulo
09950-370
Tel. +55 (11) 4366-9600
Fax +55 (11) 4362-1677
[email protected]
www.weidmueller.com.br
CN
CO
CR
Canada
W Interconnections Canada
Inc.
10 Spy Court
Markham Ontario L3R 5H6
Tel. +1 (905) 475-1507
Ext. 9836
Fax +1 (905) 475-2798
[email protected] www.weidmuller.ca
Congo
Please contact
Phambili Interface
South Africa
CZ
DE
DK
EC
EE
Switzerland
Weidmüller Schweiz AG
Rundbuckstraße 2
8212 Neuhausen am
Rheinfall SH
Tel. +41 52 674 07 07
Fax +41 52 674 07 08
[email protected]
www.weidmueller.ch
Chile
ATS - INTECH
María Luisa Santander 0475
Santiago
Providencia 7500859
Tel. +56 2 341 1271
Fax +56 2 341 1275
[email protected]
www.atsintech.com
Denmark
Weidmüller Danmark
Vallensbækvej 18A
2605 Brøndby
Tel. +45 27747800
[email protected]
www.weidmuller.dk
Ecuador
Elsystec S. A., Electricidad
Sistemas y Tecnología
Vasco de Contreras N35-251
y Mañosca
Quito - Pichincha
Tel. +593 22456510
Fax +593 22456755
[email protected]
Estonia
Please contact
our Representative Office
Weidmüller Interface GmbH
& Co. KG
Latvia
Soots Interface OÜ
Pärnu mnt 142
11317 Tallinn
Tel. +372 609 6933
Fax [email protected]
www.sootsinterface.ee
EG
ES
China
Weidmüller Interface
(Shanghai) Co. Ltd.
100 Yutong Road
25 F, BM Intercontinental
Business Center
200070 Shanghai
Tel. +86 21-22195008
Fax +86 512-68417505
customer.hotline@
weidmueller.com.cn
www.cnweidmuller.com
FI
Costa Rica
ELVATRON S. A.
la Uruca 400 Norte Banco
Costa Rica
San Jose Costa Rica
Tel. +506 2961-060
Fax +506 5200-609
[email protected]
www.elvatron.com
Germany
Weidmüller GmbH & Co. KG
Ohmstraße 9
32758 Detmold
Postfach 30 54
32720 Detmold
Tel. +49 5231 1428-0
Fax +49 5231 14-292083
[email protected]
www.weidmueller.de
GE
Georgia
Please contact
our Representative Office
Rashad Mahmudov
Azerbaijan.
GH
Ghana
Please contact
Weidmüller Interface GmbH
& Co. KG
South Africa
GR
Greece
G.A. Solutions
Ippokratous 11 Metamorfosi
144 52 Athen
Tel. +30 210 2823233
Fax +30 210 2823233
[email protected]
www.weidmuller.gr
GT
Guatemala
Prestelectro, Prestegard
Electro, S.A.
Avenida Petapa 44-22,
Zona 12
Guatemala City
Tel. +502 2442-3346
Fax +502 2476-8945
[email protected]
HK
Hong Kong
Weidmuller (Hong Kong)
Limited Co. Ltd.
Unit 1617, Metropolis Tower
No. 10 Metropolis Drive,
Hunghom, Kowloon
Tel. +852 3154 8088
Fax +852 31548099
[email protected]
HR
Croatia
ElektroPARTNER d.o.o.
Slavonska avenija 24/6
HR-10000 Zagreb
Tel. +385 (1) 6184 793
Fax +385 (1) 6184 795
[email protected]
www.elektropartner.hr
or
CPI CHILE LTDA
Av. Presidente Frei Montalva
6001, 47 complejo el cortijo
Santiago - Conchali
Tel. +562 963 8440
Fax +562 963 8440
[email protected]
www.cpichile.cl
Colombia
Automatización Avanzada
S. A.
Carrera 97 No., 24 c - 23
Bodega 4
110911 Bogotá-D.C.
Tel. +57 (1) 547-8510
Fax +57 (1) 422-3044
comercial@
automatizacionavanzada.com
www.
automatizacionavanzada.com
Czech Republic
Weidmüller s.r.o.
Lomnického 5/1705
140 00 Praha 4
Tel. +420 244 001 400
Fax +420 244 001 499
[email protected]
www.weidmueller.cz
Egypt
Standard Electric (OMEGA)
87, Mohamed Farid Street
Heliopolis
Cairo
Tel. +202 26229000
Fax +202 26221555
[email protected]
Spain
Weidmüller, S. A.
Narcis Monturiol 11-13, Pol.
Ind. Sudoeste
8960 Sant Just
Desvern - Barcelona
Tel. +34 934 803 386
Fax +34 933 718 055
[email protected]
www.weidmuller.es
Finland
Weidmüller Suomi,
Weidmüller Aktiebolagetin
sivuliike
Koy Plaza Vivace
Äyritie 8C
FI 1510 Vantaa
Tel. +358 20 7351300
Fax +358 800 114 667
[email protected]
www.weidmuller.fi
FR
France
Weidmüller E. U. R. L.
12, Chaussée Jules César
BP 263 Osny
95523 Cergy-Pontoise Cedex
Tel. +33 1 34 24 55 00
Fax +33 1 34 24 55 01
[email protected]
GB
Great Britain
Weidmüller Ltd.
Klippon House
Centurion Court Office Park,
Meridian East, Meridian
Business Park
Leicester
LE19 1TP
Tel. +44 116 282 3470
Fax +44 116 289 3582
[email protected]
www.weidmuller.co.uk
HU
Hungary
Weidmüller Kereskedelmi Kft.
Budapest
Gubacsi út 6.
1097
Tel. +36 1 382 7700
Fax +36 1 382 7701
[email protected]
www.weidmueller.hu
ID
Indonesia
PT. Nego Electrindo
Ruko Mega Grosir Cempaka
Mas Blok I No. 20 – 22
Jakarta 10640
Tel. +62 21 42882255
Fax +62 21 42882266
[email protected]
IE
Ireland
Please contact
Weidmüller Ltd.
Great Britain
IL
Israel
A. U. Shay Ltd.
23/25, Embar Street
49222 Petach-Tikva
P.O. Box 1 00 49
49222 Petach-Tikva
Tel. +972 3-923-3601
Fax +972 3-923-4601
[email protected]
www.uriel-shay.com
ATEKA Ltd.
4, Ha Tavor lane Industrial
area Segula
49691 Petach-Tikva
P.O. Box 4710
Petach-Tikva
Tel. +972 73-200-1311
Fax +972 3-924 4245
[email protected]
www.ateka.co.il
IN
India
Representative Office
Weidmüller Electronics India
Pvt. Ltd.
12th Lane North Avenue, Opp
Joggers Park,
Kalyani Nagar, Pune
411 006
Tel. +91 20-41290090
[email protected]
www.weidmueller.com
IS
Iceland
Samey Automation Center
Lyngas 13
210 Garoabaer
Tel. +354 510 5200
Fax +354 5 10 5201
[email protected]
www.samey.is
IT
Italy
Weidmüller S. r.l.
Via Albert Einstein 4
20092 Cinisello
Balsamo Milano
Tel. +39 02 660681
Fax +39 02 6124945
[email protected]
www.weidmuller.it
JM
Jamaica
Please contact
W Interconnections Inc.
United States
JO
Jordan
Trans Jordan for Electro
PO Box 33 06 07
Amman
Tel. +962 6 533 2020
Fax +962 6 533 5800
[email protected]
JP
Japan
Nihon Weidmüller Co. Ltd.
Sphere Tower Tennoz 2-2-8
Higashi-Shinagawa,
Shinagawa-ku
Tokyo
140-0002
Tel. +81 3 6711 5300
Fax +81 3 6711 5333
[email protected]
co.jp
www.weidmuller.co.jp
KE
Kenya
Please contact
Phambili Interface
South Africa
KR
Korea
Weidmuller Korea Co. Ltd.
9th floor, Wonbang B/D
Samseong 2-Dong, GangnamGu
Seoul 143-42
Tel. +82 2-516-0003
Fax +82 2-516-0090
[email protected]
www.weidmuller.co.kr
KZ
Kazakhstan
Please contact
OOO Weidmüller
Russia
LT
Lithuania
Please contact
our Representative Office
Weidmüller Interface GmbH
& Co. KG
Latvia
or
ELEKTROS IRANGA
Tinklu g. 29 a
LT-5319 Panevezys
Tel. +370 (45) 582 828
Fax [email protected]
LU
Luxembourg
Please contact
Weidmüller Benelux B. V.
Netherlands
LV
Latvia
SIA Abi4
Daugavgrivas 31b
Riga, LV-1007
Tel. +371 674 70999
Fax +371 676 24562
[email protected]
Representative Office
Weidmüller Interface GmbH
& Co. KG
Udens str. 12-118
Riga, LV-1007
Tel. +371 29254766
Fax +371 674 65637
[email protected]
com
www.weidmueller.com
1541050000 – 2015/2016
Sales company
Representation abroad
without representation abroad
Let’s connect.
MD
ME
MG
MK
Moldova
BERHORD A & D srl
79/1, str. Milescu Spartaru
MD-2075 Chisinau
Moldova
Tel. +373 (22) 815002
Fax +373 (22) 815007
[email protected]
www.ad.berhord.com
Montenegro
Please contact
our Representative Office
Weidmüller Interface GmbH
& Co. KG
Serbia.
NL
NO
Madagascar
Please contact
Phambili Interface
South Africa
Macedonia
Please contact
our Representative Office
Weidmüller Interface GmbH
& Co. KG
Serbia
NZ
or
ELEKTRO - SMK dooel
UL. III Makedonska brigada
b.b.
1000 Skopje
Tel. +389 22460295
Fax [email protected]
MT
Malta
E. S. S., Electrical Supplies &
Services Ltd.
San Gwakkin Road
Mriehel
Tel. +356 21255777
Fax +356 21255999
[email protected]
MU
MW
MX
MY
Mauritius
Mubelo Electrical Ltd.
Office 26, Gateway building,
St Jean Road
Quatre Bornes
Mauritius
Tel. +230 4670989
Fax +230 4654051
[email protected]
Malaysia
Connect Plus Technology
Sdn Bhd
No. 43, Jalan PJS 11/22,
Bandar Sunway
46150 Petaling Jaya
Selangor Darul Ehsan
Tel. +60 3 5633 7363
Fax +60 3 5633 6562
[email protected]
www.cptech.com.my
MZ
Mozambique
Please contact
Phambili Interface
South Africa
NA
Namibia
Please contact
Phambili Interface
South Africa
NG
Nigeria
Please contact
Weidmüller Interface GmbH
& Co. KG
South Africa
1541050000 – 2015/2016
Norway
Sivilingeniør J.F. Knudtzen AS
Billlingstadsletta 97
1396 Billingstad
PO Box 160
1378 Nesbru
Tel. +47 66 98 33 50
Fax +47 66 98 09 55
[email protected]
www.jfknudtzen.no
New Zealand
Cuthbert S. Steward Ltd.
27 Te Puni Street
Petone
PO Box 38496
Wellington Mail Centre 5054
Tel. (04) 568 6156
Fax (09) 489 1752
[email protected]
Cuthbert S. Steward Ltd
4 Fred Thomas Drive
Aon Building, Ground Floor,
South Entry
Takapuna
PO Box 100 338
North Shore City 745
Tel. (09) 489 1751
Fax (04) 568 6056
[email protected]
OM
PE
Malawi
Please contact
Phambili Interface
South Africa
Mexico
W Interconnections S. A.
DE C. V.
Blvd. Hermanos Serdán 698,
Col. San Rafael Oriente
72029 Puebla
Tel. +52 (222) 268 6227
Fax +52 (222) 286 6242
[email protected]
Netherlands
Weidmüller Benelux B. V.
Franciscusweg 221
1216 SE Hilversum
P.O. Box 1505
1200 BM Hilversum
Tel. +31 35 626 12 61
Fax +31 35 623 20 44
[email protected]
www.weidmuller.nl
Oman
DAN INTERNATIONAL LLC.
Ghala St. 111
BP 2901
Seeb
Tel. +968 5036 77
Fax +968 5037 55
[email protected]
Peru
IMPEXINCA S.A.C.
Calle Ortiz de Zevallos No.
105, Urb. San Antonio
18
Lima, Miraflores
Tel. +51 1 447 5608
[email protected]
www.impexinca.pe
J & W CIA. S. A.
Calle 6 Mz. D Lte. 23, Urb.
Ind. Grimanesa
01
Callao
Tel. +51 1 572 2539
Fax +51 1 572 0152
[email protected]
www.jwcia.com
PH
PK
PL
Philippines
Enclosure Systems Specialists
Inc.
2276 Don Chino Roces
Avenue Extension
Room 103/105 Narra Building
1231 Makati City
Tel. +63 2 813 8580
Fax +63 2 813 8596
[email protected]
www.enclosuresystemsph.
com
Pakistan
Automation Controls (Pak)
Apartment No. 33 C III,
Chenab Block, Allama Iqbal
Town
Lahore
Tel. +92 42 37809948
Fax +92 42 37809950
[email protected]
www.acpak.com.pk
Poland
Weidmüller Sp. z. o. o.
ul. Ogrodowa 58
00-876 Warszawa
Tel. +48 22 510 09 40
Fax +48 22 510 09 41
[email protected]
www.weidmuller.pl
PR
Puerto Rico
Please contact
W Interconnections Inc.
United States
PT
Portugal
Weidmüller Sistemas de
Interface S. A.
Estrada Outeiro Polima, R.
Augusto Dias da Silva, Lote
B - Esct. 2
São Domingos de Rana
2785-515 Abóboda
Tel. +351 214 459 191
Fax +351 214 455 871
[email protected]
www.weidmuller.pt
PY
Paraguay
Please contact
CPI SA
Argentina
RO
Romania
Representative Office
Weidmüller Interface GmbH
& Co. KG
Ionescu Crum Street, No.
1, 1st Tower, 1st Floor,
Office 4
500446 Brasov - Brasov
Business Park
Tel. +40 (268) 446 222
Fax +40 (262) 205 410
[email protected]
com
www.weidmueller.com
RS
RU
Serbia
Representative Office
Weidmüller Interface GmbH
& Co. KG
Ustanicka 189, III sprat
lokal 7a
11050 Beograd
Tel. +381 112885274
Fax +381 112885274
zoran.rabrenovic@
weidmueller.com
Russia
OOO Weidmüller
Warshavskoye highway, 25
A, bld. 6
Moskau
117105
Tel. +7 (495) 771-69-40
Fax +7 (495) 771-69-41
[email protected]
www.weidmueller.ru
SA
Saudi Arabia
Please contact
Weidmuller Middle East FZE
United Arab Emirates
SE
Sweden
Weidmüller AB
Axel Danielssons väg 271
BOX 31025
SE-200 49 Malmö
Tel. +46 77-143 00 44
Fax +46 40-37 48 60
[email protected]
www.weidmuller.se
SG
SI
SK
SV
El Salvador
Prestegard Electro
11 Avenida Norte No. 240
Edificio Salazar No. 2
San Salvador
Tel. +503 2271 1690
Fax +503 2221 3851
[email protected]
SY
Syria
Please contact
Weidmuller Middle East FZE
United Arab Emirates
SZ
Swaziland
Please contact
Phambili Interface
South Africa
TH
Thailand
Pisanu Engineering Co. Ltd.
Kwang Dingaeng, Khet
Dingaeng
800/2 Soi Trakulsuk, Asokedindaeng Road
Dindaeng, Bangkok
10400
Tel. +66 2 248 2896
Fax +662 105 6301
[email protected]
www.pisanu.co.th
TN
Tunisia
Please contact
Weidmüller E. U. R. L.
France
TR
Turkey
Weidmüller Elektronik Ticaret
Ltd. Sirketi
Kavacik Mah. Orhan Veli Kanik
Caddesi 9/1
34810 Beykoz / Istanbul
Tel. +90 (216) 537 10 70
Fax +90 (216) 537 10 77
[email protected]
www.weidmuller.com.tr
TW
Taiwan
Weidmuller (Hong Kong)
Limited
No. 3, Lane 89, ChaungYang
N. Rd
24148 SanChuang City,
Taipei
Tel. +886 921 949 751
[email protected]
TZ
Tanzania
Please contact
Phambili Interface
South Africa
UA
Ukraine
LLC WM UKRAINE
Levanevskogo str. 6
Kiev
3058
Tel. +38 044 490 32 48
Fax
[email protected]
wm-ua.com.ua/
Slovakia
ELEKTRIS s.r.o.
Elektrárenská 1
831 04 Bratislava
Tel. +421 2/4920 0113
Fax +421 2/4920 0119
[email protected]
Vietnam
AUMI Industrial Equipment &
Automation Company Limited
E1, La Thanh Hotel
218 Doi Can Street
Lieu Giai Ward, Ba Dinh
District
Hanoi City
Tel. +84 4 37628601
Fax +84 4 62661391
[email protected]
www.aumi.com.vn
Representative Office
Weidmüller Pte. Ltd.
Level 16 Saigon Tower
Building
29 Le Duan Street
District 1
Ho Chi Minh
Tel. +848 3520 7717
Fax +848 3520 7604
[email protected]
ZA
Representative Office
Weidmüller Pte. Ltd.
37/F, Sathorn Square Building
98 North Sathorn Road
Bangkok, Silom Bangrak
10500
Tel. +66 2 105 6300
Fax +66 2 642 9220
[email protected]
Singapore
Weidmüller Pte. Ltd.
70 Bendemeer Road
# 04-03 Luzerne Building
Singapore 339940
Tel. +65 6841 5311
Fax +65 6841 5377
[email protected]
www.weidmuller.com.sg
Slovenia
Elektrospoji d. o. o.
Stegne 27
SI- 1000 Ljubljana
Osrednjeslovenska
Tel. +386 1 511 3810
Fax +386 1 511 1604
[email protected]
www.elektrospoji.si
VN
Addresses worldwide
You can find all Weidmüller addresses and
your local contact on the internet at: www.
weidmueller.com/countries
South Africa
Phambili Interface
PO Box 193
1609 Johannesburg, Edenvale
5 Bundo Road, Sebenza
1610 Johannesburg
Tel. +27 (11) 4521930
Fax [email protected]
www.weidmuller.co.za
Representative Office
Weidmüller Interface GmbH
& Co. KG
210 Amarand
Avenue, Pegasus Building
181 Pretoria, waterkloof Glen
ext 2 - Tel. +27 12 003 2906
Fax +27 (11) 4526455
[email protected]
com
www.weidmueller.com
ZM
Zambia
Please contact
Phambili Interface
South Africa
ZW
Zimbabwe
Please contact
Phambili Interface
South Africa
Representative Office
Weidmueller Interface GmbH
& Co. KG
Z, office 303
7-D, Zdolbunivska str.
Kiev, 2081
Mobile +38 050 440 25 24
[email protected]
US
UZ
United States
W Interconnections Inc.
821 Southlake Boulevard
Richmond Virginia 23236
Tel. +1 (804) 794-2877
Fax +1 (804) 379-2593
[email protected]
www.weidmuller.com
X
Republic of Uzbekistan
Please contact
OOO Weidmüller
Russia
X.15
Index
X
X.16
We cannot guarantee that there are no mistakes in the
publications or software provided by us to the customer for the
purpose of making orders. We try our best to quickly correct
errors in our printed media.
All orders are based on our general terms of delivery, which can
be reviewed on the websites of our group companies where you
place your order. On demand we can also send the general terms
of delivery to you.
1541050000 – 2015/2016
Weidmüller – Your partner in Industrial Connectivity
As experienced experts we support our customers and partners around the world
with products, solutions and services in the industrial environment of power,
signal and data. We are at home in their industries and markets and know the
technological challenges of tomorrow. We are therefore continuously developing
innovative, sustainable and useful solutions for their individual needs. Together we
set standards in Industrial Connectivity.
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
32758 Detmold, Germany
T +49 5231 14-0
F +49 5231 14-292083
[email protected]
www.weidmueller.com
Made in Germany
Your local Weidmüller partner can
be found on our website:
www.weidmueller.com/countries
Order number: 1541050000/01/2015/SMKW
Similar pages