download 692141030100.pdf

1
2
3
4
5
TECHNICAL CHARACTERISTICS
MATERIAL
INSULATOR: LCP
FLAMMABILITY RATING: UL94-V0
COLOR: BLUE
CONTACT MATERIAL: PHOSPHOR BRONZE
CONTACT TYPE: STAMPED
CONTACT PLATING: UNDERPLATE 1.27 to 2.54 µm Ni
CONTACT AREA 0.76 µm Gold
SOLDER TAIL AREA 2.54 to 5.08 µm Matt Tin
SHIELDING: BRASS MATT TIN PLATED
QUALITY CLASS: 5000 MATING CYCLES
A
ENVIRONMENTAL
OPERATING TEMPERATURE: -40°C up to +85°C
COMPLIANCE: LEAD FREE & RoHS
PCB LAYOUT * - COMPONENT VIEW
ELECTRICAL
CURRENT RATING:
- PIN 1 & PIN 4 (Vbus & corresponding ground PIN) 1.8A MAX
- OTHER PINS 0.25 A MAX
WORKING VOLTAGE: 30V AC
DIELECTRIC WITHSTANDING VOLTAGE: 100VAC/MIN
INSULATION RESISTANCE: > 100 MΩ
CONTACT RESISTANCE:
- PIN 1 & PIN 4: 30 mΩ MAX
- OTHER PINS: 50 mΩ MAX
B
STANDARD
CERTIFIED: E323964
MECHANICAL
INSERTION FORCE: 35.0N MAX
EXTRACTION FORCE: 10.0N MIN
SOLDERING
JEDEC LEAD FREE WAVE SOLDERING
C
PACKAGING
TRAY
RoHS Compliant
* NOTE: THE RECOMMENDED PCB LAYOUT IS FOR AN OPTIMIZED RETENTION FORCE OF CONNECTOR ON PCB BUT IT IMPLIES INSERTION FORCE THAT A LOT OF PICK AND PLACE MACHINES ARE NOT ABLE TO HANDLE. THEREFORE IT MIGHT BE NECESSARY TO
DRILL BIGGER HOLES FOR THE CLIPS. PLEASE CHECK THIS CARFULLY.
PROJECTION:
GENERAL TOLERANCE
.X = +/- 0.2
.XX = +/- 0.15
APPROVAL: NPr
UNIT: MM
I
01-DEC-14
TEMPERATURE
AS
SCALE:
H
27-OCT-14
PDF
AS
SHEET: 1/3
REV
DATE
FILE
BY
DRAW: AS
DESCRIPTION: WR-COM - USB 3.0 STACKED TYPE A
SIZE
WERI PART NO: 692 141 030 100
A4
D
1
2
3
4
5
A
B
C
RoHS Compliant
PROJECTION:
G
F
GENERAL TOLERANCE
.X = +/- 0.2
.XX = +/- 0.15
E
D
C
APPROVAL: NPr
B
UNIT: MM
DESCRIPTION: WR-COM - USB 3.0 STACKED TYPE A
SIZE
WERI PART NO: 692 141 030 100
A4
SCALE:
A
02-APR-10
REV
DATE
PACKAGING
FILE
JP
SHEET: 2/3
BY
DRAW: AS
D
1
2
3
4
5
Cautions and Warnings:
This electronic component is designed and developed with the intention for use
in general electronics equipments.
Before incorporating the components into any equipments in the field such as aerospace, aviation,
nuclear control, submarine, transportation, (automotive control, train control, ship control),
transportation signal, disaster prevention, medical, public information network etc. where higher safety
and reliability are especially required or if there is possibility of direct damage or injury to human body,
Wurth Elektronik must be asked for a written approval.
In addition, even electronic component in general electronic equipments, when used in electrical circuits
that require high safety, reliability functions or performance, the sufficient reliability evaluation-check
for the safety must be performed before by the user before usage.
A
B
C
RoHS Compliant
PROJECTION:
G
F
GENERAL TOLERANCE
.X = +/- 0.2
.XX = +/- 0.15
E
D
C
APPROVAL: JC
B
UNIT: MM
DESCRIPTION: DISCLAIMER
SIZE
WERI PART NO: DISCLAIMER
A4
SCALE:
A
10-SEP-14
PDF
QL
SHEET: 3/3
REV
DATE
FILE
BY
DRAW: QL
D
Similar pages