Product Overview MC100EL90: Translator, Triple ECL Input to PECL Output For complete documentation, see the data sheet Product Description The MC100EL90 is a triple ECL to PECL translator. The device receives either -3.3 V or-5 V differential ECL signals, determined by the VEE supply level, and translates them to standard +5 V differential PECL output signals. To accomplish the level translation, the EL90 requires three power rails. The VCC supply should be connected to the positive supply, and the VEE pin should be connected to the negative power supply. The GND pins, as expected, are connected to the system ground plane. Both VEE and VCC should be bypassed to ground via 0.01 F capacitors. Under open input conditions, the D input will be biased at VEE/2 and the D input will be pulled to VEE . This condition will force the Q output to a LOW, ensuring stability. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 F capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open. Features • • • • • • • • • 500 ps Propagation Delays ESD Protection: >2 kV HBM, >200 V MM The 100 Series Contains Temperature Compensation Operating Range: VCC = 4.75 V to 5.25 V; VEE = -3.0 V to -5.5 V; GND= 0 V Internal Input Pulldown Resistors Q Output will Default LOW with Inputs Open or at VEE Pb-Free Packages are Available Flammability Rating: UL-94 code V-0 @ 0.125 in, Oxygen Index 28 to 34 Transistor Count = 261 devices Part Electrical Specifications Product Compliance Status Channels Input Level Output Level VCC Typ (V) fMax Typ (MHz) tpd Typ (ns) tR & tF Max (ps) Package Type MC100EL90DWG Pb-free Active 3 ECL ECL 5 650 0.5 500 SOIC-20W Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016