Product Overview MC10H605: REG Hex ECL/TTL Translator For complete documentation, see the data sheet Product Description The MC10/100H605 is a 6-bit, registered, dual supply ECL to TTL translator. The device features differential ECL inputs for both data and clock. The TTL outputs feature balanced 24mA sink/source capabilities for driving transmission lines. With its differential ECL inputs and TTL outputs the H605 device is ideally suited for the receive function of a HPPI bus type board-to board interface application. The on chip registers simplify the task of synchronizing the data between the two boards. A VBB reference voltage is supplied for use with single ended data or clock. For single-ended applications the VBB output should be connected to the "bar" inputs (Dn or CLK) and bypassed to ground via a 0.01uF capacitor. To minimize the skew of the device differential clocks should be used. The ECL level Master Reset pin is asynchronous and common to all flip-flops. A "HIGH" on the Master Reset forces the Q outputs "LOW". The device is available in either ECL standard: the 10H device is compatible with MECL 10H logic levels while the 100H device is compatible with 100K logic levels. Features • • • • • • Differential ECL Data and Clock Inputs 24mA Sink, 24mA Source TTL Outputs Dual Power Supply Multiple Power and Ground Pins to Minimize Noise 2.0ns Part-to-Part Skew Pb-Free Packages are Available Part Electrical Specifications Product Compliance Status Channels Input Level Output Level VCC Typ (V) MC10H605FNG Pb-free Active 6 ECL TTL 5 Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016 fMax Typ (MHz) tpd Typ (ns) tR & tF Max (ps) Package Type 5.1 1500 PLCC-28