Product Change Notification ® Product Change Notification Number: WC093002 Date: August 12, 2009 Title: Modifications to AT90PWM216 and AT90PWM316 Datasheet Product Identification: Part Number Part Number AT90PWM316-16SE AT90PWM316-16SU AT90PWM316-16ME AT90PWM316-16MU AT90PWM216-16SE AT90PWM216-16SU Reason for Change: Design Manufacturing Location Processing Quality/Reliability Logistics Material Change Description: Atmel has found an error in the AT90PWM216 and AT90PWM316 datasheet. The datasheet has been updated to better describe the functionality of the devices. Note that the devices themselves or the test-program used for the devices have not been changed. In chapter “26.1 Absolute Maximum Ratings” the following updates are made: "Voltage on any Pin except RESET with respect to Ground" Previous value updated value -1.0V to Vcc+0.5V -0.5V to Vcc+0.5V "Voltage on RESET with respect to Ground" Previous value updated value -1.0V to 13.0V -0.5V to 13.0V Identification Method to Distinguish Change: The updated datasheet can be downloaded from http://www.atmel.com/dyn/resources/prod_documents/doc7710.pdf Qualification Data: Samples: available will be available in WW___ available. Go to http://www.atmel.com/forms/Samples.asp not applicable Quantifiable Impact on Quality & Reliability: None Proposed First Ship Date: Not applicable - No changes are made to the product *The Proposed First Ship Date is the forecasted date that a customer may expect to receive changed product. This is determined by the estimated date of inventory depletion on the PCN issue date. This may be affected by fluctuations in supply and demand. Consequently, although customers should be prepared to receive changed product on this date, Atmel will continue to ship pre-changed product until a time in which inventory has been depleted. This may result in pre-changed product being shipped to customers after this forecasted date. Atmel Contact: [email protected] Atmel will deem this change accepted unless specific conditions of acceptance are provided in writing within 30 days from the date of this notice. All correspondence must be sent to the Atmel Contact e-mail address listed above. Information provided herein is in connection with Atmel products and this information is provided “AS IS”. Atmel assumes no responsibility for any errors that may appear in this document. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Atmel’s Terms and Conditions of Sale for such products, Atmel assumes no liability whatsoever, and Atmel disclaims any express or implied warranty, including liability or warranties relating to fitness for a particular purpose, merchantability, or non-infringement of any patent, copyright or other intellectual property right. Atmel products are not intended for use in a product or system intended to support or sustain life which, if it fails, can be reasonably expected to result in significant personal injury. Atmel may make changes to specifications and product descriptions at any time, without notice. Atmel Norway • Vestre Rosten 79 7075 Tiller • NORWAY CPQ-2005 Rev. 23