DSC1001 DATA SHEET (09/18/2015) DOWNLOAD

DSC1001
Low-Power Precision CMOS Oscillator
1.8~3.3V
Features
General Description
The DSC1001 is a silicon MEMS based CMOS
oscillator offering excellent jitter and stability
performance over a wide range of supply
voltages and temperatures.
The device
operates from 1 to 150MHz with supply voltages
between 1.8 to 3.3 Volts and temperature
ranges up to -40ºC to 105ºC.
The DSC1001 incorporates an all silicon
resonator that is extremely robust and nearly
immune to stress related fractures, common to
crystal based oscillators. Without sacrificing the
performance and stability required of today’s
systems, a crystal-less design allows for a
higher level of reliability, making the DSC1001
ideal for rugged, industrial, and portable
applications where stress, shock, and vibration
can damage quartz crystal based systems.
Available in industry standard packages, the
DSC1001 can be “dropped-in” to the same PCB
footprint as standard crystal oscillators.









Frequency Range: 1 to 150MHz
Exceptional Stability over Temperature
o ±10 PPM, ±25 PPM, ±50 PPM
Operating voltage
o 1.7 to 3.6V
Operating Temperature Range
o Ext. Industrial -40ºC to 105ºC
o Industrial -40ºC to 85ºC
o Ext. Commercial -20ºC to 70ºC
o Commercial 0ºC to 70ºC
Low Operating and Standby Current
o 5mA Operating (40MHz)
o 15uA Standby
Ultra Miniature Footprint
o 2.5 x 2.0 x 0.85 mm
o 3.2 x 2.5 x 0.85 mm
o 5.0 x 3.2 x 0.85 mm
o 7.0 x 5.0 x 0.85 mm
MIL-STD 883 Shock and Vibration
Resistant
Pb Free, RoHS, Reach SVHC Compliant
AEC-Q100 Reliability Qualified
Benefits

Block Diagram

VDD
Resonator
Output




Pin for pin “drop in” replacement for
industry standard oscillators
Semiconductor level reliability,
significantly higher than quartz
Short mass production lead-times
Longer Battery Life / Reduced Power
Compact Plastic package
Cost Effective
VCO
PFD
Applications
Frac-N
PLL
Standby#
(pin1)
Page 1
GND






Mobile Applications
Consumer Electronics
Portable Electronics
DVR, CCTV, Surveillance Cameras
Low Profile Applications
Industrial Applications
MK-Q-B-P-D-050610-01-8
1.8~3.3V
DSC1001
Low-Power Precision CMOS Oscillator
Absolute Maximum Ratings1
Item
Min
Max
Unit
Input Voltage
-0.3
VDD+0.3
V
Junction Temp
-
+150
°C
Storage Temp
-55
+150
°C
Soldering Temp
-
+260
°C
ESD
-
DSC1001
Condition
4000
200
CDM
1500
-
032.0000
T
Family
Package, Temp
& Stability
40 sec max.
Tape/
Reel
Output Freq
1.0 to 150MHz
V
HBM
MM
CE1
* See Ordering Information for details
Ordering Code
Recommended Operating Conditions
Parameter
Symbol
Range
Supply Voltage
VDD
1.7 – 3.6V
Output Load
ZL
R>10KΩ, C≤15pF
Operating Temperature
Option 1
Option 2
Option 3
Option 4
T
-40 to +105 °C
-40 to +85 °C
-20 to +70 °C
0 to +70 °C
Specifications (VDD = 1.8 to 3.3v) TA=850C unless otherwise specified
Parameter
Symbol
Condition
Min
Frequency
f0
Single Frequency
1
Frequency Tolerance
Δf
Aging
Δf
Supply Current, standby
Typ
Max
Unit
150
MHz
±10,±25,±50
ppm
1 year @25°C
±5
ppm
IDD
T=25°C
15
uA
Output Logic Levels
Output logic high
Output logic low
VOH
VOL
-4mA
4mA
0.2*VDD
Volts
Output Startup Time2
tSU
T=25°C
1.0
1.3
ms
Output Disable Time
tDA
20
100
ns
Includes frequency
variations due to initial
tolerance, temperature
and power supply voltage
0.8*VDD
-
Output Duty Cycle
SYM
45
55
%
Input Logic Levels
Input logic high
Input logic low
VIH
VIL
0.75*VDD
-
0.25* VDD
Volts
Page 2
MK-Q-B-P-D-050610-01-8
DSC1001
1.8~3.3V
Low-Power Precision CMOS Oscillator
VDD = 1.8v
Parameter
Supply Current, no load
Symbol
IDD
Condition
1MHz
CL=0p
27MHz
RL=∞
70MHz
T=25°C
150MHz
Min
Typ
6.0
6.5
7.2
8.3
Max
6.3
6.9
7.5
9.1
3
3
Output Transition time
Rise Time
Fall Time
tR
tF
CL=15pF; T=25°C
20%/80%*VDD
1.8
1.0
Jitter, Max Cycle to Cycle
JCC
F = 100MHz3
60
Unit
mA
ns
Ps
VDD = 2.5v
Parameter
Supply Current, no load
Symbol
IDD
Condition
1MHz
CL=0p
27MHz
RL=∞
70MHz
T=25°C
150MHz
Min
Typ
6.0
6.7
7.7
9.6
Max
6.3
7.0
8.1
10.6
2
2
Output Transition time
Rise Time
Fall Time
tR
tF
CL=15pF; T=25°C
20%/80%*VDD
1.0
0.9
Jitter, Max Cycle to Cycle
JCC
F = 100MHz3
50
Unit
mA
ns
ps
VDD = 3.3v
Parameter
Supply Current, no load
Output Transition time
Rise Time
Fall Time
Jitter, Max Cycle to Cycle
Symbol
IDD
tR
tF
JCC
Condition
1MHz
CL=0p
27MHz
RL=∞
70MHz
T=25°C
150MHz
CL=15pF; T=25°C
20%/80%*VDD
F = 100MHz3
Min
Typ
6.0
6.8
8.2
10.8
Max
6.3
7.2
8.7
12.2
1.0
0.9
50
2
2
Unit
mA
ns
ps
Notes:
1.
Absolute maximum ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be
operated beyond these limits.
2.
tSU is time to stable output frequency after VDD is applied. tSU and tEN (after EN is asserted) are identical values.
3.
Measured over 50k clock cycles.
Page 3
MK-Q-B-P-D-050610-01-8
1.8~3.3V
DSC1001
Low-Power Precision CMOS Oscillator
Nominal Performance Characteristics
Supply Current
Supply Current
16
Vdd = 3.65V
Ta = 25°C
20
0pF
8pF
15pF
Supply Current (mA)
Supply Current (mA)
24
16
12
8
4
0
Vdd = 1.65V
Ta = 25°C
12
50
100
Frequency (MHz)
4
150
0
50
100
Frequency (MHz)
150
Fall Time
2
2
Vdd = 3.3V
1.5
-40°C
25°C
85°C
Vdd = 3.3V
1.5
Fall Time (ns)
Rise Time (ns)
15pF
8
Rise Time
1
0.5
-40°C
25°C
85°C
1
0.5
0
0
0
50
100
Frequency (MHz)
0
150
50
100
Frequency (MHz)
150
Fall Time
Rise Time
2
2
Vdd = 1.8V
-40°C
25°C
85°C
Vdd = 1.8V
1.5
Fall Time (ns)
1.5
Rise Time (ns)
8pF
0
0
1
0.5
-40°C
25°C
85°C
1
0.5
0
0
0
Page 4
0pF
50
100
Frequency (MHz)
150
0
50
100
Frequency (MHz)
150
MK-Q-B-P-D-050610-01-8
1.8~3.3V
DSC1001
Low-Power Precision CMOS Oscillator
Output Waveform
tR
tF
VOH
Output
VOL
tEN
1/fo
tDA
VIH
Standby#
VIL
Standby Function
Standby#
Output
(pin 1)
(pin 3)
Hi Level
Output ON
Open
(no connect)
Output ON
Low Level
High Impedance
Test Circuit
IDD
VDD
0.01uF
4
3
1
2
15pF
*VSD
*VSD = Standby# Logic Level Input
Page 5
MK-Q-B-P-D-050610-01-8
1.8~3.3V
DSC1001
Low-Power Precision CMOS Oscillator
Board Layout (recommended)
Solder Reflow Profile
20-40
Sec
MSL 1 @ 260°C refer to JSTD-020C
Ramp-Up Rate (200°C to Peak Temp) 3°C/Sec Max.
Preheat Time 150°C to 200°C
60-180 Sec
Time maintained above 217°C
60-150 Sec
255-260°C
Peak Temperature
Time within 5°C of actual Peak
20-40 Sec
6°C/Sec Max.
Ramp-Down Rate
Time 25°C to Peak Temperature
8 min Max.
Se
3C
/
217°C
200°C
60-150
Sec
S
6C/
ec
3C
/
Se
cM
ax
.
Reflow
25°C
60-180
Sec
x.
150°C
Ma
Temperature (°C)
cM
ax
.
260°C
Cool
Pre heat
Time
8 min max
Package Dimensions
7.0 x 5.0 mm Plastic Package
External Dimensions
7.0±0.10 [0.276±0.004]
#4
Recommended Land Pattern*
5.08 [0.200]
5.08 [0.2]
#3
#3
#4
2.6 [0.102]
2.6 [0.102]
3.5 [0.138]
0.2 [0.008]
2.2 [0.087]
#1
#2
5.0±0.10 [0.197±0.004]
#2
1.4 [0.055]
0.2 [0.008]
#1
0.85±0.05 [0.033±0.002]
Page 6
o
o
o
o
o
1.4 [0.055]
0.2 [0.008]
1.4 [0.055]
1.2 [0.047]
No.
1
2
3
4
o
Pin Terminal
Standby#
GND
Output
VDD
*Note: The center pad is not connected
internally and should be left unconnected or tied to GND.
units: mm [inch]
MK-Q-B-P-D-050610-01-8
1.8~3.3V
DSC1001
Low-Power Precision CMOS Oscillator
5.0 x 3.2 mm Plastic Package
External Dimensions
#3
2.54 [0.100]
2.54 [0.100]
5±0.10 [0.197±0.004]
#4
Recommended Land Pattern
#4
#3
2.1 [0.083]
1.2 [0.047]
0.2 [0.008]
0.1 [0.004]
#2
1.2 [0.047]
#1
#2
3.2±0.10 [0.126±0.004]
1.1 [0.043]
#1
0.1 [0.004]
1.2 [0.047]
0.9 [0.035]
No.
1
2
3
4
0.85±0.05 [0.033±0.002]
Pin Terminal
Standby#
GND
Output
VDD
units: mm [inch]
3.2 x 2.5 mm Plastic Package
External Dimensions
3.2±0.05 [0.126±0.002]
#4
Recommended Land Pattern
2.1 [0.083]
2.1 [0.083]
#3
#3
#4
0.9 [0.035]
0.9 [.035]
1.0 [0.039]
CO.25
#1
#2
2.5±0.05 [0.098±0.002]
#2
0.9±0.05 [0.035±0.002]
#1
0.8±0.1 [0.031±0.004]
0.85±0.05 [0.033±0.002]
Page 7
No.
1
2
3
4
Pin Terminal
Standby#
GND
Output
VDD
0.2 [0.008]
0.9 [0.035]
units: mm [inch]
MK-Q-B-P-D-050610-01-8
1.8~3.3V
DSC1001
Low-Power Precision CMOS Oscillator
2.5 x 2.0 mm Plastic Package
External Dimensions
2.5±0.05 [0.098±0.002]
#4
Recommended Land Pattern
1.65 [0.065]
1.65 [0.065]
#3
#3
#4
0.7 [0.028]
0.7 [0.028]
0.85 [0.033]
CO.25
#1
#2
2.0±0.05 [0.079±0.002]
#2
0.65±0.05 [0.026±0.002]
#1
0.2 [0.008]
0.65 [0.026]
0.65±0.10 [0.026±0.004]
No
.1
2
3
4
0.85±0.05 [0.033±0.002]
Pin Terminal
Standby#
GND
Output
VDD
units: mm [inch]
Ordering Information
DSC1001 PTS – xxx.xxxx T
PART NUMBERING GUIDE
Package
(Plastic QFN)
P=A:
P=B:
P=C:
P=D:
7.0x5.0mm
5.0x3.2mm
3.2x2.5mm
2.5x2.0mm
Temperature
T=C: 0o ~ +70o C
T=E: -20o ~ +70o C
T=I: -40o ~ +85o C
T=L: -40o ~ +105o C
Stability
Frequency
Packing Option
S=1: ±50ppm
S=2: ±25ppm
S=5: ±10ppm
XXX.XXXX
-
Blank: Tubes
T: Tape & Reel
Example: DSC1001CE1–123.0000T
The example part number above is a 123.0000MHz oscillator in Plastic 3.2x2.5mm package, with ±50ppm
stability over an operating temperature of -20 to +70oC, shipped in Tape and Reel.
Disclaimer:
Micrel makes no representations or warranties with respect to the accuracy or completeness of the information furnished in this data sheet. This information is not intended as a
warranty and Micrel does not assume responsibility for its use. Micrel reserves the right to change circuitry, specifications and descriptions at any time without notice. No
license, whether express, implied, arising by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Micrel’s terms and
conditions of sale for such products, Micrel assumes no liability whatsoever, and Micrel disclaims any express or implied warranty relating to the sale and/or use of Micrel
products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right.
Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be
expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life,
and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support
appliances, devices or systems is a Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale.
MICREL, Inc.
Phone: +1 (408) 944-0800
Page 8
●
●
2180 Fortune Drive,
Fax: +1 (408) 474-1000
San Jose, California
95131
● Email: [email protected]
●
●
USA
www.micrel.com
MK-Q-B-P-D-050610-01-8