PCN / EOL Notification PCN Number: SC141602 Notification Date*: May 6, 2014 Title: EOL and Replacement of the AT30TS75 Digital Temperature Sensor with the New AT30TS74 and AT30TS75A Product Identification: All versions of the AT30TS75 Reason for Change: Material / Composition Manufacturing Location Processing / Manufacturing Quality / Reliability Design / Firmware Logistics Datasheet Other: Change Description: The AT30TS75 Digital Temperature Sensor is being replaced by two new Digital Temperature Sensors (AT30TS74 and AT30TS75A) to address some of the errata specifications listed in the AT30TS75 datasheet and to better address end market/application requirements. In addition, both the AT30TS74 and AT30TS75A have been improved over the AT30TS75 to feature an industry-first, wide supply voltage range of 1.7V to 5.5V versus the previous 2.7V to 5.5V of the AT30TS75. Lastly, the introduction of the AT30TS74 enables the ability to offer a new WLCSP (wafer-level chip scale package) to address space-constrained applications and to allow placement of the Temperature Sensor as close as possible to desired “hot spot” measurement points. Attachment A highlights the differences between the AT30TS75 and the new, replacement AT30TS74 and AT30TS75A devices. Identification Method to Distinguish Change: The base catalog part number changes from AT30TS75 to either AT30TS74 or AT30TS75A. Table 1 lists the full catalog part number combinations for each package option. Please refer to the AT30TS75, AT30TS74, and AT30TS75A datasheets for details on the part marking schemes for each package type. Table 1 EOL Part Number Replacement Part Number (Option 1) Replacement Part Number (Option 2) Package Carrier Type AT30TS75-MA8-T AT30TS74-MA8M-T AT30TS75A-MA8M-T UDFN T&R AT30TS75-SS8-B AT30TS74-SS8M-B AT30TS75A-SS8M-B SOIC Bulk AT30TS75-SS8-T AT30TS74-SS8M-T AT30TS75A-SS8M-T SOIC T&R AT30TS75-XM8-B AT30TS74-XM8M-B AT30TS75A-XM8M-B MSOP Bulk AT30TS75-XM8-T AT30TS74-XM8M-T AT30TS75A-XM8M-T MSOP T&R Note: Standard datasheet offerings are listed in the table; however, this PCN also applies to all special CAN (customer specific) part numbers that are not listed in the table. Qualification Data: Available ATMEL San Jose QF-8005 Rev. 14 07/23/2013 Will be available (mm/dd/yr): 1600 Technology Dr, San Jose Not Applicable CA 95110 USA Page 1 of 4 PCN/EOL NO. SC141602 Page 2 of 4 Samples: AT30TS75A Available AT30TS74 Will be available (mm/dd/yr): Not Applicable SOIC/MSOP on 5/12/14 UDFN on 6/9/14 Quantifiable Impact on Quality & Reliability: None Forecasted Availability Date: Now Last Time Buy Date: July 15, 2014 Last Ship Date: December 31, 2014 *All orders placed after the notification date are non-cancellable and non-returnable (NCNR). Atmel Contact: Please contact your Atmel Sales Representative or Distributor for additional information (when replying via e-mail please include the PCN number in subject line). Information provided herein is in connection with Atmel products and this information is provided “AS IS”. Atmel assumes no responsibility for any errors that may appear in this document. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Atmel’s Terms and Conditions of Sale for such products, Atmel assumes no liability whatsoever, and Atmel disclaims any express or implied warranty, including liability or warranties relating to fitness for a particular purpose, merchantability, or non-infringement of any patent, copyright or other intellectual property right. Atmel products are not intended for use in a product or system intended to support or sustain life which, if it fails, can be reasonably expected to result in significant personal injury. Atmel may make changes to specifications and product descriptions at any time, without notice. Attention Distributors: Product(s) identified in this notification will become obsolete and as such this EOL notification will act as the official written notification. All obsolete products will be listed in the next published quarterly distributor price book, following an PCN/EOL change, and listed on the obsolescence form which accompanies said price book. Within thirty (30) days from the published date of the price book, Distributor shall notify Atmel in writing of Distributor’s then current inventory of the obsolete product CUSTOMER ACKNOWLEDGEMENT OF RECEIPT: Atmel requests you acknowledge receipt of this PCN / EOL. Please complete and email to [email protected] and the Atmel Contact listed above. In your acknowledgement, you can grant approval or request additional information. Atmel will deem this change accepted unless specific conditions of acceptance are provided in writing within 30 days from the date of this notice. To be completed by customer: Approved Rejected (Please state reason for rejection): Company: Name: Title: Date: Email Address: Location: Comments: ATMEL San Jose QF-8005 Rev. 14 07/23/2013 1600 Technology Dr, San Jose CA 95110 USA PCN/EOL NO. SC141602 Page 3 of 4 Attachment A RED text indicates changes/improvements Parameter/Feature AT30TS75 AT30TS74 AT30TS75A (based on 09/2013 datasheet) (based on 03/2014 datasheet) (based on 03/2014 datasheet) 2.7V to 5.5V 1.7V to 5.5V 1.7V to 5.5V -55°C to +125°C -55°C to +125°C -55°C to +125°C Operating Voltage Operating Temperature Temperature Sensor Accuracy and Conversion Characteristics Temperature Sensor Accuracy ±1.0°C typ TA = 0°C to +55°C ±1.0°C typ TA = -20°C to +100°C ±0.5°C typ TA = 0°C to +85°C (±1.5°C max) VCC = 2.7V to 3.6V (±2.0°C max) VCC = 1.7V to 5.5V (±1.0°C max) VCC = 1.7V to 5.5V TA = -25°C to +105°C ±1.0°C typ TA = -5°C to +90°C ±2.0°C typ TA = -40°C to +125°C ±1.0°C typ (±2.0°C max) VCC = 2.7V to 3.6V (±3.0°C max) VCC = 1.7V to 5.5V (±2.0°C max) VCC = 1.7V to 5.5V ±2.0°C typ TA = -20°C to +125°C TA = -55°C to +125°C ±2.0°C typ TA = -40°C to +125°C (±3.0°C max) VCC = 2.7V to 3.6V VCC = 1.7V to 5.5V (±3.0°C max) ±1.0°C typ TA = 0°C to +55°C (±2.0°C max) VCC = 3.6V to 5.5V ±2.0°C typ TA = -20°C to +105°C (±3.0°C max) VCC = 1.7V to 5.5V VCC = 3.6V to 5.5V VCC = 2.7V to 5.5V TA = -55°C to +125°C ±3.0°C typ VCC = 2.7V to 5.5V Selectable 9 to 12 bits (0.5°C to 0.0625°C) 25ms typ 9-bit resolution (37.5ms max) 50ms typ 10-bit resolution (75ms max) Conversion Time ±3.0°C typ VCC = 1.7V to 5.5V TA = -55°C to +125°C TA = -40°C to +125°C ±3.0°C typ Conversion Resolution ±3.0°C typ 100ms typ 11-bit resolution (150ms max) 200ms typ 12-bit resolution (300ms max) Selectable 9 to 12 bits (0.5°C to 0.0625°C) 25ms typ 9-bit resolution (37.5ms max) 50ms typ 10-bit resolution (75ms max) 100ms typ 11-bit resolution (150ms max) 200ms typ 12-bit resolution (300ms max) Selectable 9 to 12 bits (0.5°C to 0.0625°C) 25ms typ 9-bit resolution (37.5ms max) 50ms typ 10-bit resolution (75ms max) 100ms typ 11-bit resolution (150ms max) 200ms typ 12-bit resolution (300ms max) Power-Up Conditions 500µs max 1ms max 1ms max Power-On Reset Voltage (VPOR) 2.6V max 1.6V max 1.6V max Max Allowed Power-Up Time (tPU ) 1ms max N/A N/A Power-On Reset Time (tPOR) ATMEL San Jose QF-8005 Rev. 14 07/23/2013 1600 Technology Dr, San Jose CA 95110 USA PCN/EOL NO. SC141602 Page 4 of 4 Attachment A (Continued) RED text indicates changes/improvements Parameter/Feature AT30TS75 AT30TS74 AT30TS75A (based on 09/2013 datasheet) (based on 03/2014 datasheet) (based on 03/2014 datasheet) DC Characteristics 95µA typ (125µA max) Active Current, 120µA typ Bus Inactive, Active Temperature Conversions (175µA max) VCC = 3.3V VCC = Max (5.5V) 60µA typ 1.7V ≤ VCC ≤ 2.0V (75µA max) 65µA typ 2.7V ≤ VCC ≤ 3.6V (95µA max) 85µA typ 4.5V ≤ VCC ≤ 5.5V (125µA max) 125µA typ (175µA max) Active Current, Bus Active, fSCL = 400kHz Active Temperature Conversions Active Current, Bus Active, fSCL = 3.4MHz Active Temperature Conversions Shutdown Mode Current, Bus Inactive 200µA typ (250µA max) VCC = 3.3V VCC = Max (5.5V) 120µA typ 1.7V ≤ VCC ≤ 2.0V (160µA max) 150µA typ 2.7V ≤ VCC ≤ 3.6V (225µA max) 65µA typ 2.7V ≤ VCC ≤ 3.6V (95µA max) 85µA typ 4.5V ≤ VCC ≤ 5.5V (125µA max) 120µA typ 1.7V ≤ VCC ≤ 2.0V (160µA max) 150µA typ 2.7V ≤ VCC ≤ 3.6V (225µA max) 4.5V ≤ VCC ≤ 5.5V 225µA typ (325µA max) 4.5V ≤ VCC ≤ 5.5V 350µA typ (650µA max) VCC = 3.3V 235µA typ (375µA max) 2.2V ≤ VCC ≤ 3.6V 235µA typ (375µA max) 2.2V ≤ VCC ≤ 3.6V 400µA typ (750µA max) VCC = Max (5.5V) 610µA typ (800µA max) 4.5V ≤ VCC ≤ 5.5V 610µA typ (800µA max) 4.5V ≤ VCC ≤ 5.5V 0.6µA typ (1.5µA max) VCC = 3.3V 0.4µA typ (2.5µA max) 1.7V ≤ VCC ≤ 2.0V 0.4µA typ (2.5µA max) 1.7V ≤ VCC ≤ 2.0V 1.1µA typ (3.0µA max) VCC = Max (5.5V) 0.6µA typ 2.7V ≤ VCC ≤ 3.6V (3.5µA max) 1.2µA typ 115µA typ (165µA max) Shutdown Mode Current, 170µA typ Bus Active, fSCL = 400kHz (220µA max) 4.5V ≤ VCC ≤ 5.5V VCC = 3.3V VCC = Max (5.5V) 110µA typ 1.7V ≤ VCC ≤ 2.0V (140µA max) 130µA typ 2.7V ≤ VCC ≤ 3.6V (180µA max) 180µA typ 4.5V ≤ VCC ≤ 5.5V (270µA max) 310µA typ Bus Active, fSCL = 3.4MHz 1.7V ≤ VCC ≤ 2.0V 225µA typ (325µA max) (5.5µA max) Shutdown Mode Current, 60µA typ (75µA max) (600µA max) 360µA typ (700µA max) VCC = 3.3V VCC = Max (5.5V) 210µA typ 2.2V ≤ VCC ≤ 3.6V (365µA max) 550µA typ 4.5V ≤ VCC ≤ 5.5V (750µA max) 0.6µA typ 2.7V ≤ VCC ≤ 3.6V (3.5µA max) 1.2µA typ 4.5V ≤ VCC ≤ 5.5V (5.5µA max) 110µA typ 1.7V ≤ VCC ≤ 2.0V (140µA max) 130µA typ 2.7V ≤ VCC ≤ 3.6V (180µA max) 180µA typ 4.5V ≤ VCC ≤ 5.5V (270µA max) 210µA typ 2.2V ≤ VCC ≤ 3.6V (365µA max) 550µA typ 4.5V ≤ VCC ≤ 5.5V (750µA max) AC Characteristics 3.4MHz Maximum Clock Frequencies (High-Speed Mode) 400kHz (Fast Mode) VCC ≥ 2.7V VCC ≥ 2.7V 3.4MHz (High-Speed Mode) 1MHz VCC ≥ 2.2V VCC < 2.2V (Fast Mode Plus) 3.4MHz (High-Speed Mode) 1MHz VCC < 2.2V (Fast Mode Plus) Errata The internal fault counter will be reset when Errata 1 updating the Configuration Register, the THIGH None None None None Limit Register, or the TLOW Limit Register Depending on power supply ramp time, the Errata 2 ALERT pin may not be configured in the proper state to be a true open drain ATMEL San Jose QF-8005 Rev. 14 07/23/2013 1600 Technology Dr, San Jose CA 95110 USA VCC ≥ 2.2V