FINAL PRODUCT/PROCESS CHANGE NOTIFICATION #20385 Generic Copy Issue Date: 06-Mar-2014 TITLE: Addition of ASE Shanghai, China and Amkor P3, Philippines as qualified assembly sites for Filter & Protection devices in DFN packages PROPOSED FIRST SHIP DATE: 06-Jun-2014 or earlier with customer approval AFFECTED CHANGE CATEGORY(S): ON Semiconductor Assembly Site FOR ANY QUESTIONS CONCERNING THIS NOTIFICATION: Contact your local ON Semiconductor Sales Office or Mike Begonia <[email protected]> SAMPLES: Contact your local ON Semiconductor Sales Office ADDITIONAL RELIABILITY DATA: Available Contact your local ON Semiconductor Sales Office or Francis Lualhati <[email protected]> NOTIFICATION TYPE: Final Product/Process Change Notification (FPCN) Final change notification sent to customers. implementation of the change. FPCNs are issued at least 90 days prior to ON Semiconductor will consider this change approved unless specific conditions of acceptance are provided in writing within 30 days of receipt of this notice. To do so, contact <[email protected]>. DESCRIPTION AND PURPOSE: This is the final notification announcing that ON Semiconductor has qualified its Filter & Protection devices in DFN package (please refer to the list of affected general parts section for complete device list), for assembly at ASE Shanghai factory located in the China and at Amkor P3, located in the Philippines. Both sites are ISO/TS16949:2009 certified and have already been qualified and utilized by ON Semiconductor. Two devices have been identified as qualification vehicle, based on the package dimension, die size and volumes. Reliability testing and full electrical characterization over temperatures were performed to ensure device functionality and electrical specifications are met. Upon expiration or approval of the FPCN, devices listed in this final PCN will have ASE Shanghai as additional assembly site. Customer may receive devices assembled in our in-house Seremban, Malaysia assembly facilities; UTAC, Thailand, Amkor P3 Philippines and ASE Shanghai after that. The location of the assembly sites can be identified by the marking of the date code Issue Date: 06-Mar-2014 Rev. 06-Jan-2010 Page 1 of 3 FINAL PRODUCT/PROCESS CHANGE NOTIFICATION #20385 RELIABILITY DATA SUMMARY: Qual Vehicle: EMI4183MUTAG Qualification Results and Analysis: Test: HTRB HTSL TC-PC HAST-PC Autoclave-PC Conditions: TA=150°C, 80% rated voltage TA = 150°C Ta= -65 C to 150 C Ta=130C RH=85%, Ta=121C RH=100% ~15 psig Interval: 1008 hrs 1008 hrs 1000 cyc 96 hrs 96 hrs Results 0/240 0/240 0/240 0/240 0/240 Conclusion: All reliability requirements have been met. Qual Vehicle for ESDR0502MNTBG: MG2040MUTAG Qualification Results and Analysis: Test: Conditions: Interval: HTRB TA=150°C, 80% rated voltage 1008 hrs HTSL TA = 150°C 1008 hrs TC-PC Ta= -65 C to 150 C 1000 cyc HAST-PC Ta=130C RH=85%, 96 hrs Autoclave-PC Ta=121C RH=100% ~15 psig 96 hrs Results 0/240 0/240 0/240 0/240 0/240 Conclusion: All reliability requirements have been met. Additional Qualification Requirement for ESDR0502MNTBG Test: Conditions: Interval: TC-PC Ta= -65 C to 150 C 1000 cyc Results 0/240 Conclusion: All reliability requirements have been met. CHANGED PART IDENTIFICATION: 1. Marking of the month date codes: Seremban Malaysia assembled devices: M UTAC Thailand assembled devices: Amkor P3 assembled devices: ASE Shanghai assembled devices: Issue Date: 06-Mar-2014 Rev. 06-Jan-2010 Page 2 of 3 FINAL PRODUCT/PROCESS CHANGE NOTIFICATION #20385 List of affected General Parts: Device EMI4183MUTAG EMI4182MUTAG EMI4183MTTAG EMI4182MTTAG EMI4192MTTAG EMI2121MTTAG EMI2124MTTAG ESDR0502NMUTBG Note: SBN E E E E E E E E UTAC E E E E E E E Amkor E E E E E E E N ASE N N N N N N N N E – Existing Assembly Site N – New Assembly Site Issue Date: 06-Mar-2014 Rev. 06-Jan-2010 Page 3 of 3