Product Overview MC74HC4852A: Analog Multiplexer/Demultiplexer (Mux/Demux) with Injection Current Effect Control For complete documentation, see the data sheet Product Description Automotive Customized These devices are pin compatible to standard HC405x and MC1405xB analog mux/demux devices, but feature injection current effect control. This makes them especially suited for usage in automotive applications where voltages in excess of normal logic voltage are common. The injection current effect control allows signals at disabled analog input channels to exceed the supply voltage range without affecting the signal of the enabled analog channel. This eliminates the need for external diode/ resistor networks typically used to keep the analog channel signals within the supply voltage range. The devices utilize low power silicon gate CMOS technology. The Channel Select and Enable inputs are compatible with standard CMOS outputs. Features • • • • • • Injection Current Cross-Coupling Less than 1mV/mA (See Figure 9) Pin Compatible to HC405X and MC1405XB Devices Power Supply Range (VCC - GND) = 2.0 to 6.0 V In Compliance With the Requirements of JEDEC Standard No. 7A Chip Complexity: 154 FETs or 36 Equivalent Gates Pb-Free Packages are Available* Part Electrical Specifications Product Compliance Status Channels Number of Switches Configuratio n Icc Max (µA) ron Max (Ω) VCC Min (V) VCC Max (V) Package Type MC74HC4852ADG Pb-free Active 8 3 SP8T 40 550 2 6 SOIC-16 Active 8 3 SP8T 40 550 2 6 SOIC-16 Active 8 3 SP8T 40 550 2 6 TSSOP-16 Active 8 3 SP8T 40 550 2 6 SOIC-16 Active 8 3 SP8T 40 550 2 6 TSSOP-16 Halide free MC74HC4852ADR2G Pb-free Halide free MC74HC4852ADTR2G Pb-free Halide free NLV74HC4852ADR2G AEC Qualified PPAP Capable Pb-free Halide free NLVHC4852ADTR2G AEC Qualified PPAP Capable Pb-free Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016