Product Overview

Product Overview
NCN1154: DP3T Data Switch, USB 2.0 High Speed / Audio, with Negative
Swing Capability
For complete documentation, see the data sheet
Product Description
The NCN1154 is a DP3T switch for combined true-ground audio, USB 2.0 high speed data, and UART applications. It allows
portable systems to use a single port to pass either USB data or audio signals from an external headset; the 3 channels being
compliant to USB 2.0, USB 1.1 and USB 1.0. The switch is capable of passing signals with negative voltages as low as 2 V below
ground. The NCN1154 features shunt resistors on the audio ports. These resistors are switched in when the audio channel is off and
provide a safe path to ground for any charge that may build up on the audio lines. This reduces Pop & Click noise in the audio
system. The device has an extended VCC range which can operate off VCC up to 4.2 V while passing true ground audio signals down
to -2 V.
Features
Benefits
• 3:1 High Speed Switch
• 5.25 V tolerant on common pins
• High Bandwidth of 820 MHz
• Capable of passing negative swing signals down to -2V on
R/L channel
• 1.8 V compatible control pin
• Audio channel shunt resistors
• Ultra-low THD
Applications
• Multiplexe audio or high speed data or UART signals path
from a single USB receptacle
• Support any short to VBUS
• USB2.0, USB1.1, USB1.0 capable on all channels
• Can connect an audio true ground amplifier to a micro USB
headset
• GPIO Low Voltage Control
• Pop and click noise reduction
• Minimal audio distortion
End Products
• Shared High Speed data or audio on a single connector
• Micro or Mini USB applications
•
•
•
•
GPS
Cellular and wireless phones
Tablets and Portable gaming
Bar Code Scanners
Part Electrical Specifications
Product
Compliance
Status
Channels
Number of
Switches
Configuratio
n
NCN1154MUTAG
Pb-free
Active
2
1
DP3T
Halide free
Icc Max (µA)
ron Max (Ω)
VCC Min (V)
VCC Max (V)
Package
Type
2.7
5
UQFN-12
Application Diagram
For more information please contact your local sales support at www.onsemi.com
Created on: 6/30/2016