Product Overview MC10LVEP16: Differential Driver / Receiver For complete documentation, see the data sheet Product Description The MC10LVEP16 is a world-class differential receiver/driver. The device is functionally equivalent to the EL16, EP16 and LVEL16 devices. With output transition times significantly faster than the EL16 and LVEL16, the LVEP16 is ideally suited for interfacing with high frequency and low voltage (2.5 V) sources. Single ended input operation is limited to a VCC >= 3.0 V in PECL mode, or VEE <= 3.0 V in NECL mode. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 uF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open. The 100 Series contains temperature compensation. Features • • • • • • • 240 ps Propagation Delay Maximum Frequency > 4 GHz Typical PECL Mode Operating Range: VCC= 2.375 V to 3.8 V with VEE=0 V NECL Mode Operating Range: VCC=0 V with VEE= -2.375 V to -3.8 V VBB Output Open Input Default State LVDS Input Compatible Part Electrical Specifications Product Compliance Status Type Chann els Input / Input Output Level Ratio Output VCC Level Typ (V) tJitterR MS Typ (ps) tskew(oo) Max (ps) tpd Typ (ns) tR & tF Max (ps) fmaxClo fmaxDat Packa ck Typ a Typ ge (MHz) (Mbps) Type MC10LVEP16DG Pb-free Active Signal Driver 1 1:1 ECL 0.147 20 0.24 170 4000 SOIC8 0.147 20 0.24 170 4000 SOIC8 0.147 20 0.24 170 4000 TSSO P-8 0.147 20 0.24 170 4000 TSSO P-8 Halide free LVD S 2.5 3.3 CML ECL MC10LVEP16DR2G Pb-free Active Halide free Signal Driver 1 1:1 LVD S ECL 3.3 2.5 CML ECL MC10LVEP16DTG Pb-free Active Halide free Signal Driver 1 1:1 LVD S ECL 2.5 3.3 CML ECL MC10LVEP16DTR2G Pb-free Halide free Active Signal Driver 1 1:1 CML ECL ECL 2.5 3.3 LVD S For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016