PSoC® DEVELOPMENT KIT QUICK START GUIDE PSoC Development Board Self Test 1 Remove the PSoC Development Board from the kit package. 3 After self test, read the success message on the LCD screen. 5 For PSoC 1 Development • View the Kit User’s Guide. • Install the PSoC 1 Software. 2 Connect the AC power adapter. 4 Select an Architecture • PSoC 1: Insert the “PSoC 1 Software” CD and jump to step 5. • PSoC 3 / PSoC 5: Insert the “PSoC 3 / PSoC 5 Software” CD and jump to step 6. 6 For PSoC 3 / PSoC 5 Development • View the Kit User’s Guide. • Install the PSoC 3 / PSoC 5 Software. PSoC DEVELOPMENT KIT QUICK START GUIDE PSoC Development Board Power Source Switch (3.3 V/5.0 V) Adjustable Regulator Variable Resistor LCD Module Board Reset Button P8: 40-Pin GPIO Expansion Port AC Power Adapter LCD Contrast P7:40-Pin GPIO Expansion Port 9 V Power Adapter RS-232 Interface PSoC Processor Module Socket Prototyping Breadboard P6:46-Pin GPIO Expansion Port USB Interface Wireless 12-Pin Module Interface P5: 40-Pin GPIO Expansion Port Variable Resistor/ Potentiometer CapSense®, Switches, and LED I/Os PSoC CY8C28 Family Processor Module PSoC CY8C38 Family Processor Module PSoC CY8C55 Family Processor Module 10-Pin JTAG/SWD/SWV PSoC Device In-Circuit Emulator Interface Debug and Programming Header PSoC Devices ISSP Programming Header 10-Pin Trace Header Kit Revision To know if you are using the latest kit, look for the kit revision in the white sticker on the bottom left on the back side of the kit box. If the revision reads CY8CKIT-001B, then congratulations, you own the latest version. You can also check the silicon marketing part number on the processor module; the part number should be CY8C3866AXI-040. This kit is equipped with production PSoC 3 silicon. For the latest information about this kit, visit www.cypress.com/go/CY8CKIT-001 © 2009-2012 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered trademarks referenced herein are the properties of their respective owners. Doc.#: 001-53756 Rev. *C