Product Overview NCP348: Positive Overvoltage Protection Circuit with Internal Low Ron NMOS FET and Status Flag For complete documentation, see the data sheet Product Description The NCP348 is able to disconnect the systems from its output pin in case wrong input operating conditions are detected. The system is positive overvoltage protected up to +28 V. Due to this device using internal NMOS, no external device is necesary, reducing the system cost and the PCB area of the application board. The NCP348 is able to instantaneously disconnect the output from the input, due to integrated Low Ron Power NMOS (80 mΩ, if the input voltage exceeds the overvoltage threshold (6.4 V) or undervoltage threshold, of 3.25 V (UVLO). At powerup (EN(BAR) pin = low level), the Vout turns on 50 ms after the Vin exceeds the undervoltage threshold. The NCP348 provides a negative going flag(FLAG(BAR)) output, which alerts the system that a fault has occurred. In addition, the device has ESD-protected input (15 kV Air) when bypassed with a 1.0 µF or larger capacitor. Features • • • • • • • • • • Overvoltage Protection up to 28 V On-Chip Low RDS(on) NMOS Transistor: 80 mΩ Internal Charge Pump Overvoltage Lockout (OVLO) Undervoltage Lockout (UVLO) Internal 50 ms Startup Delay Alert FLAG(BAR) Output Shutdown EN(BAR) Input Compliance to IEC61000-4-2 (Level 4), 8.0 kV (Contact), and 15 kV (Air) ESD Ratings: Machine Model = B, Human Body Model = 3 For more features, see the data sheet Applications • Cell Phones, Camera Phones, Digital Still Cameras, Personal Digital Applicaitons, and MP3 Players Part Electrical Specifications Product Compliance Status VCC Min (V) VCC Max (V) P(AV) Max (W) VIT+ Typ (V) VIT Typ (V) IDDH Max (µA) TA Min (°C) TA Max (°C) Package Type NCP348AEMTTBG Pb-free Active 1.2 28 0.48 6.02 3.25 250 -40 85 WDFN-10 Active 1.2 28 0.48 6.4 3.25 250 -40 85 WDFN-10 Halide free NCP348MTTBG Pb-free Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016