Product Overview NCP3712ASN: Overvoltage Protected High Side Switch For complete documentation, see the data sheet Product Description This Overvoltage Protected High Side Switch is primarily intended to protect loads from transients by isolating the load from the transient energy rather than absorbing it. Features • • • • • • • • • • Capable of Switching Loads of up to 200 mA without External Rboost Switch Shuts Off in Response to an Over Voltage Input Transient Features Active Turn Off for Fast Input Transient Protection Flexible Over Voltage Protection Threshold Set with External Zener Automatic Recovery after Transient Decays Below Threshold Withstands Input Transients up to 105 V Peak Guaranteed Off State with Enblbar Input ESD Resistant in Accordance with the 2000 V Human Body Model Extremely Low Saturation Voltage Pb-Free Packages are Available For more features, see the data sheet Applications • • • • • High Voltage Transient Isolation Power Switching to Electronic Modules DC Power Distribution in Line Operated Equipment Buffering Sensitive Circuits from Poorly Regulated Power Supplies Pre-conditioning of Voltage Regulator Input Voltage Part Electrical Specifications Product Compliance Status NCP3712ASNT1G Pb-free VCC Min (V) VCC Max (V) P(AV) Max (W) VIT+ Typ (V) VIT Typ (V) IDDH Max (µA) TA Min (°C) TA Max (°C) Package Type Active -40 85 SC-74 Active -40 85 SC-74 Active -40 85 TSOP-6 Active -40 85 TSOP-6 Halide free NCP3712ASNT3G Pb-free Halide free SZNCP3712ASNT1G AEC Qualified PPAP Capable Pb-free Halide free SZNCP3712ASNT3G AEC Qualified PPAP Capable Pb-free Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016