Product Overview NCV952: 26V Rail-Rail Input/Output, 3.5MHz, Dual Op-Amp For complete documentation, see the data sheet Product Description The NCV952 is a dual, low power, operational amplifier optimized and fully specified for 3 V and 5 V operation. Rail-to-rail output performance over the supply range of 2.7 V to 26 V provides increased dynamic range in single- and split-supply applications. This device offers a gain-bandwidth of 3.5 MHz and a slew rate of 1 V/µs, with only 0.7 mA of quiescent current. The NCV952 is available in a space saving 8-pin TSSOP-8 package. Features Benefits • • • • Rail-to-rail Input Common Mode Voltage Range Rail-to-rail Output Swing Wide Supply Range: 2.7 V to 26 V Excellent Gain-bandwidth and Speed: 3.5 MHz at 1 V/µs with 3 V Supply • Low Quiescent Current: 0.7 mA at VS = 3 V per Channel • PSRR: 105 dB Typical • NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q100 Qualified and PPAP Capable Applications • • • • • • • • • Input signals can extend 200 mV beyond the rails Wide output signal swing Compatable with a wide range of supply voltages Compatible with wide signal frequency range • Low power comsumption • Hgh immunity to power supply fluctuations • Meets automotive requirements End Products General Purpose Operational Amplifier Active Filter Signal Conditioning Amplifiers/ADC Buffer Instrumentation and Sensoring Transformer/Line Drivers • • • • • Set?top Boxes Laptop/Notebook Computers Personal Entertainment Systems Cell Phones and Other Portable Communications Portable Headphone Speakers Part Electrical Specifications Product Compliance Status Rail to Rail Channel s NCV952DTBR2G AEC Qualified Active Input/Ou 2 tput VCC Min (V) VCC Max IO Min (V) (mA) IO Typ (mA) ID Typ (mA) GBW Typ (MHz) SR Typ (V/µs) VIO Max (mV) Packag e Type 2.7 26 10 0.7 3.5 1 8 TSSOP8 10 PPAP Capable Pb-free Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016