Agilent E363xA Series Programmable DC Power Supplies Data Sheet Reliable Power, Repeatable Results • Single and triple output • 80 W to 200 W output power • Dual range output (except E3631A) • Low noise and excellent regulation • Remote sensing (except E3631A) • Front and rear output terminals (E3633A/34A only) • GPIB and RS-232 standard • Save and recall functions • Overvoltage protection, Overcurrent protection (except E3631A) Clean and stable power with programmability at an affordable price Affordable programmable power supplies to meet your needs The E363xA Series of programmable DC power supplies gives you the performance of the system power supplies at a decent price. All models provide clean power, excellent regulation and a fast transient response with built-in GPIB and RS-232 interfaces. The E363xA Series is designed to meet the requirements of the most demanding applications in R&D design verifications, production testing, and QA verifications with traditional quality and reliability which you can count on. Excellent performance you can trust With the 0.01% load and line regulation, the E363xA Series can maintain a steady output when power line and load changes occur. The power supplies specify both normal mode voltage/current noise and common mode current noise. The low normal mode noise specification assures clean power for precision circuitry applications, and the low common mode current provides isolation from power line current injection. Remote Interface If you have an IEEE-488 card or RS-232 in a PC, these power supplies will work for you. Every model comes equipped with both GPIB and RS-232 as standard. All programming is done in easy-to-use SCPI (Standard Commands for Programmable Instruments). The user’s guide describes the process for the first-time programmers. Front Panel Operation A knob and self-guiding keypads allow you to set the output at your desired resolution quickly and easily. You can store and recall for up to three complete setups using the internal non-volatile memory. The output on/ off button sets the output to zero. 2 E3631A triple-output power supply This famous 80-watt triple output supply offers three independent outputs: 0 to 6 V/5A, 0 to +25V/1A and 0 to –25V/1A. The 6 V output is electrically isolated from the ±25 V supply to minimize any interference between circuits under test. The ±25 V outputs can be set to track each other. E3632A/33A/34A single-output dual range power supplies These single output power supplies give you the flexibility to select from a dual output range. The output load is protected against overvoltage and overcurrent, which are easily monitored and adjusted from the front panel and remote interface. Remote sensing is available to eliminate the errors caused by voltage drops on the load leads. The E3633A/34A offer front and rear output terminals for easy wiring. E3631A/32A/33A/34A Programmable DC Power Supply Specifications E3631A Model Number DC Output Rating (0 ºC to 40 ºC) 1 2 3 0 to +6 V, 0 to 5 A 0 to +25 V, 0 to 1 A 0 to –25 V, 0 to 1 A E3632A E3633A E3634A 0 to 15 V/7 A or 0 to 30 V/4 A 0 to 8 V/20 A or 0 to 20 V/10 A 0 to 25 V/7 A or 0 to 50 V/ 4 A < 350 μVrms/3 mVpp < 500 μVrms/ 3 mVpp Load Regulation ± (% of output + offset) < 0.01% + 2 mV < 0.01% + 250 μA Line Regulation ± (% of output + offset) < 0.01% + 2 mV < 0.01% + 250 μA Ripple and Noise (20 Hz to 20 MHz) Normal Mode Voltage Normal Mode Current < 350 μVrms/2 mVpp < 2 mArms < 500 μArms < 2 mArms Common Mode Current < 1.5 μArms Accuracy1 12 Months (25 ºC + 5 ºC), ± (% output + offset) Programming Voltage 0.1% + 5 mV 0.05% + 20 mV 0.05% + 10 mV Current 0.2% + 10 mA 0.15% + 4 mA 0.2% + 10 mA Voltage 0.1% + 5 mV 0.05% + 10 mV 0.05% + 5 mV Current 0.2% + 10 mA 0.15% + 4 mA 0.15% + 5 mA Program 0.5 mV/0.5 mA 1.5 mV/0.1 mA 1 mV/0.5 mA 1 mV/1 mA 3 mV/0.5 mA Readback 0.5 mV/0.5 mA 1.5 mV/0.1 mA 0.5 mV/0.1 mA 0.5 mV/1 mA 1.5 mV/0.5 mA Meter 1 mV/1 mA 1 mV/1 mA 1 mV/1 mA (< 10A), 10 mA (¡ 10 A) Transient Response Less than 50 μsec for output to recover to within 15 mV following a change in output current from full load to half load or vice versa Readback2 Resolution Command Processing Time3 10 mV/1 mA < 50 msec < 100 msec Accuracy ± (% output + offset) N/A 0.5% + 0.5 V/0.5% + 0.5 A Activation Time N/A 1.5 msec, OVP ¡ 3 V/< 10 msec, OVP < 3 V and OCP <10 msec OVP/OCP Temperature Coefficient per ºC (% output + offset) Voltage 0.01% + 2 mV Current 0.02% + 3 mA 0.01% + 3 mV 0.02% + 0.5 mA 0.02% + 3 mA Stability, constant load & temperature ± (% of output + offset), 8 hrs Voltage 0.03% + 1 mV 0.02% + 2 mV 0.02% + 1 mV Current 0.1% + 3 mA 0.05% + 1 mA 0.1% + 1 mA Remote Sense (max. voltage in each load lead) N/A 1V 0.7 V Voltage Programming Speed, to within 1% of total excursion Up Down Full Load 11 msec 50 msec 50 msec 95 msec 80 msec No Load 10 msec 20 msec 20 msec 45 msec 100 msec Full Load 13 msec 45 msec 45 msec 30 msec 30 msec No Load 200 msec 400 msec 400 msec 450 msec 450 msec Accuracy specifications are valid after a 1-hour warm-up and calibration at 25 ºC. Accuracy refers to readback over GPIB and RS-232 or front panel with respect to actual output. 3 Maximum time for output to change after receipt of commands. 1 2 3 Model Number E3631A 1 2 AC Input (47 Hz – 63 Hz) E3632A E3633A E3634A 100 Vac ±10% (Opt 0E9)/115 Vac ±10% (Std)/230 Vac ±10% (0E3) Dimensions Weight 3 213 x mm W x 133 mm H x 348 mm D (8.4 x 5.2 x 13.7 in) 8.2 kg (18 lbs) net, 11 kg (24 lbs) shipping Warranty 9.5 kg (21 lbs) net, 12 kg (26 lbs) shipping Three years for E363xA series power supplies Three months for standard shipped accessories Product Regulation Certified to CSA 22.2 No. 231 (for E3631A), No. 1010.1 (for E3632A/33A/34A); conforms to IEC 1010-1; carries CE marks; complies with CISPR-11, Group 1, Class A Ordering Information Rackmount Kits* E3630 Series Power Supplies E3631A 80-Watt Triple Power Supply E3632A 120-Watt Single Power Supply E3633A/34A 200-Watt Single Power Supply Agilent E3631A/32A/33A/34A To rackmount two instruments sideby-side Lock-link Kit (P/N 5061-9694) Flange Kit (P/N 5063-9214) To rackmount one or two instruments in a sliding support shelf Support Shelf (P/N 5063-9256) Slide Kit (P/N 1494-0015) required for support shelf Standard Shipped Accessories User’s & Service guide, Product Reference CD, AC power cord * Rackmounting with 1CM or lock-link/flange kit requires Agilent or customer support rails Agilent Support Rails-E3663AC Power Options Opt. 0E3 230 Vac ± 10% Opt. 0EM 115 Vac ± 10% Opt. 0E9 100 Vac ± 10% Other Options Opt. 0L2 Extra manual sets Opt. 1CM Rackmount kit* Opt. UK6 Commercial calibration with test result data E3600A-100 Test lead kit 4 www.agilent.com myAgilent myAgilent www.agilent.com/find/myagilent A personalized view into the information most relevant to you. www.axiestandard.org AdvancedTCA® Extensions for Instrumentation and Test (AXIe) is an open standard that extends the AdvancedTCA for general purpose and semiconductor test. Agilent is a founding member of the AXIe consortium. Three-Year Warranty www.agilent.com/find/ThreeYearWarranty Agilent’s combination of product reliability and three-year warranty coverage is another way we help you achieve your business goals: increased confidence in uptime, reduced cost of ownership and greater convenience. Agilent Advantage Services www.agilent.com/find/AdvantageServices Accurate measurements throughout the life of your instruments. DEKRA Certified ISO 9001:2008 Agilent Electronic Measurement Group Quality Management System Sys www.lxistandard.org LAN eXtensions for Instruments puts the power of Ethernet and the Web inside your test systems. Agilent is a founding member of the LXI consortium. www.pxisa.org PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a rugged, PC-based high-performance measurement and automation system. Agilent Channel Partners www.agilent.com/find/channelpartners Get the best of both worlds: Agilent’s measurement expertise and product breadth, combined with channel partner convenience. www.agilent.com/quality For more information on Agilent Technologies’ products, applications or services, please contact your local Agilent office. The complete list is available at: www.agilent.com/find/contactus Americas Canada Brazil Mexico United States (877) 894 4414 (11) 4197 3600 01800 5064 800 (800) 829 4444 Asia Pacific Australia 1 800 629 485 China 800 810 0189 Hong Kong 800 938 693 India 1 800 112 929 Japan 0120 (421) 345 Korea 080 769 0800 Malaysia 1 800 888 848 Singapore 1 800 375 8100 Taiwan 0800 047 866 Other AP Countries (65) 375 8100 Europe & Middle East Belgium 32 (0) 2 404 93 40 Denmark 45 45 80 12 15 Finland 358 (0) 10 855 2100 France 0825 010 700* *0.125 €/minute Germany 49 (0) 7031 464 6333 Ireland 1890 924 204 Israel972-3-9288-504/544 Italy 39 02 92 60 8484 Netherlands 31 (0) 20 547 2111 Spain 34 (91) 631 3300 Sweden 0200-88 22 55 United Kingdom 44 (0) 118 927 6201 For other unlisted countries: www.agilent.com/find/contactus (BP-3-1-13) Product specifications and descriptions in this document subject to change without notice. © Agilent Technologies, Inc. 2013 Published in USA, April 18, 2013 5968-9726EN