SCHURTER AG CH-6002 Luzern www.schurter.com PRODUCT CONTENT SHEET UMBRELLA SPECIFICATION Power Entry Module CMF1 and CMF2 Schurter part numbers CMF1.1XX1.12 and CMF2.1XX1.12 Version CMF1 / CMF2 See below See below Composition part Material group Materials Socket Polymer Switch housing/Rocker Voltage selector Polymer Package family Date Metal Parts CAS Average mass [weight-%] *) Sum [%] PA66 45.8 45.8 PA6 28.7 28.7 Copper Cu 14.2 25.5 Zinc Zn 8.3 Tin Sn 0.1 Nickel Ni 0.3 Iron Fe 1.9 Argent Ag 0.2 Chrom Cr 0.5 if applicable Sum in total: or: Traces 100 Weight range 13.7 g Part complies with RoHS 2002/95/EC (yes/no): Yes Fluctuation margin N/a Part complies with China RoHS (yes/no): Yes Case sizes**) and weight range N/a *) related to package weight; weight in particular, see corresponding package weight list **) optional Not part of package family Company Address E-mail Internet N/a SCHURTER AG Werkhofstrasse 8-12 CH-6002 Luzern, Switzerland [email protected] www.schurter.com Important remarks: 1) 2) 3) Certified Management ISO 9001 since 1990 Systems ISO 14001 since 1996 SA 8000 since 2004 4) 5) Traces are product parts, substances etc. that are below a percentage of 0.1 % by weight. Higher limits are accepted if the substance or material is legally regulated (see note no. 2). A list of the (legal) “... restrictions on substances ...“ or materials is available at internet address: http://www.eicta.org/content/Default.asp?PageID=211 Substances, materials etc. with possible harmful effects on human beings and the environment are listed. There are no risks for human beings and to the environment if products are properly used as designated. This shall not apply to risks caused during procedures for disposal etc. All statements herein are based on our present knowledge. If our products are used properly, there are no risks to human beings and/or the environment. This Product Content Sheet has been established according to Umbrella Specs, an initiative of the German Electrical and Electronic Manufacturer’s Association (ZVEI). Reference: „Information on Substances and Materials in Products“, http://www.zvei-be.org/umbrella_specs/ Power Entry Module CMF1 and CMF2 Creation date: 07.02.2005 14:25:00 0104.0116 Created by: Release date: Released by: Notification No. HOL 20.04.2007 HOA 18734 Index Page b 1 von 1 Print date: 20/04/2007 11:44:00