Product Overview

Product Overview
NS5S1153: DP2T USB 2.0 High Speed / Audio Switch with Negative Swing
Capability
For complete documentation, see the data sheet
Product Description
The NS5S1153 is a DPDT switch for combined true-ground audio and USB 2.0 high speed data applications. It allows portable
systems to use a single port to pass either USB data or audio signals from an external headset; headset; the 2 channels being
compliant to USB 2.0, USB 1.1 and USB 1.0. The switch is capable of passing signals with negative voltages as low as 2 V below
ground. The device features shunt resistors on the audio ports. These resistors are switched in when the audio channel is off and
provide a safe path to ground for any charge that may build up on the audio lines. This reduces Pop and Click noise in the audio
system. The NS5S1153 is also equipped with VBUS detection circuitry to immediately switch to USB mode in the event that a
voltage is detected on VBUS. The NS5S1153 is housed in a space saving, ultra low profile 1.4 x 1.8 x 0.5 mm 10 pin UQFN
package.
Features
Benefits
• 2:1 High Speed switch
• 5.25 V tolerant on common pins
• High Bandwidth of 820 MHz
• Capable of passing negative swing signals down to -2 V on
R/L channel
• 1.8 V compatible control pin and VBUS detection circuitry
• Audio channel shunt resistors
• Ultra-low THD
Applications
• Multiplexe audio or high speed data path from a single USB
receptacle
• Support any short to VBUS
• USB2.0, USB1.1, USB1.0 capable on all channels
• Can connect an audio true ground amplifier to a micro USB
headset
• Auto or manual switching between channels
• Pop and click noise reduction
• Minimal audio distortion
End Products
• Micro or Mini USB applications
• Shared High Speed data or audio on a single connector
•
•
•
•
Cellular and wireless phones
GPS
Tablets and Portable gaming
Bar Code Scanners
Part Electrical Specifications
Product
Compliance
Status
Channels
Number of
Switches
Configuratio
n
Icc Max (µA)
ron Max (Ω)
VCC Min (V)
VCC Max (V)
Package
Type
NS5S1153MUTAG
Pb-free
Active
2
4
DPDT
35
4.6
2.7
5
UQFN-10
Halide free
Application Diagram
For more information please contact your local sales support at www.onsemi.com
Created on: 6/30/2016