OMRON CP1W

SYSMAC CJ-series CJ2M CPU Units, Pulse I/O Modules
CJ2M-CPU3@/-CPU1@/-MD21@
CSM_CJ2M-CPU3__-CPU1__-MD21__DS_E_2_1
Since 2001, CJ1M-series PLCs are in
control of a wide variety of
applications worldwide.
The accumulated experience and
advancements in technology now
result in CJ2M; fully compatible, yet
fully new.
CJ2M-MD21@
CJ2M-CPU3@
CJ2M-CPU1@
• Increased performance, and increased memory capacity
• Up to 40 I/O unit on any CPU
• Pulse I/O Modules add position control functions to any CPU
• USB for plug-and-play access to the PLC
• All models available with or without Ethernet port
• Choice of serial port plug-in modules
Features
• Five variations in program capacity from 5K steps to 60K steps; scale the CPU to your application needs.
• Faster processors; LD instruction execution time is reduced to 40 ns, floating point trigonometrics in less than 1 μs.
• Optional Pulse I/O Modules can be mounted to enable positioning functions for up to four axes. The module provides high-speed counters,
interrupt inputs and pulse train/PWM outputs. (CJ2M CPU Units with Unit Version 2.0 or Later)
• Faster Function Block calls and execution, faster interrupt handling, less overhead time.
• Added execution memory for Function Blocks allows structured, object-oriented programming even in entry-level CPUs.
• General-purpose Ethernet port supports EtherNet/IP tag-based data links, connection to Support Software, communications between PLCs,
FTP data transfers, and more (CJ2M-CPU3@).
• Standard USB port on all models allows Support Software to connect directly through standard USB cable.
• A Serial Option Module can be mounted to add RS-232C or RS-422A/485 communications ports (CJ2M-CPU3@).
• Compatible with all existing CJ1 power supply-, I/O-, control- and communication units.
1
CJ2M-CPU3@/-CPU1@/-MD21@
Ordering Information
International Standards
• The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus,
UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives.
• Contact your OMRON representative for further details and applicable conditions for these standards.
CJ2M CPU Units (Built-in EtherNet/IP)
Current
consumption (A)
Specifications
Product name
CJ2M (Built-in
EtherNet/IP)
CPU Units
I/O capacity/
Mountable Units
(Expansion Racks)
2,560 points/
40 Units
(3 Expansion
Racks max.)
Program
capacity
Data memory
capacity
LD
instruction
execution
time
EtherNet/IP
function
Option
board
slot
Model
5V
60K steps 160K words
(DM: 32K words,
EM: 32K words ×
30K steps
4 banks)
20K steps
64K words
(DM: 32K words,
10K steps
EM: 32K words ×
1 bank)
5K steps
Standards
24 V
CJ2M-CPU35
CJ2M-CPU34
0.04 μs
YES
0.7
(See
note.)
YES
−
CJ2M-CPU33
UC1, N, L,
CE
CJ2M-CPU32
CJ2M-CPU31
Note: Add 0.005A, 0.030A and 0.075A when using Serial Communications Option Boards (CP1W-CIF01/11/12), respectively.
Add 0.15A/Unit when using NT-AL001 RS-232C/RS-422A Adapters.
Add 0.04A/Unit when using CJ1W-CIF11 RS-422A Adapters.
Add 0.20A/Unit when using NV3W-M@20L Programmable Terminals.
CJ2M CPU Units
Current
consumption (A)
Specifications
Product name
I/O capacity/
Mountable Units
(Expansion Racks)
CJ2M CPU
Units
2,560 points/
40 Units
(3 Expansion
Racks max.)
Program
capacity
Data memory
capacity
LD
instruction
execution
time
EtherNet/IP
function
Option
board
slot
Model
5V
60K steps 160K words
(DM: 32K words,
EM: 32K words ×
30K steps
4 banks)
20K steps
64K words
(DM: 32K words,
10K steps
EM: 32K words ×
1 bank)
5K steps
Standards
24 V
CJ2M-CPU15
CJ2M-CPU14
0.04 μs
−
−
0.5
(See
note.)
−
CJ2M-CPU13
UC1, N, L,
CE
CJ2M-CPU12
CJ2M-CPU11
Note: Add 0.15A/Unit when using NT-AL001 RS-232C/RS-422A Adapters.
Add 0.04A/Unit when using CJ1W-CIF11 RS-422A Adapters.
Add 0.20A/Unit when using NV3W-M@20L Programmable Terminals.
Serial Communications Option Boards (Only CJ2M-CPU3@)
The serial communications port can be equipped by installing the serial communications option board to the option board slot in front of CPU unit.
Product name
RS-232C Option
Board
RS-422A/485
Option Board
RS-422A/485
Isolated-type
Option Board
Specifications
One RS-232C port
Connector: D-Sub, 9 pin, female
Maximum transmission distance: 15m
One RS-232C connector (D-Sub, 9 pin, male) is included.
(Plug: XM2A-0901, Hood: XM2S-0911-E)
One RS-422A/485 port
Terminal block: using ferrules
Maximum transmission distance: 50m
One RS-422A/485 port (Isolated)
Terminal block: using ferrules
Maximum transmission distance: 500m
Serial communications
mode
Current
consumption (A)
5V
0.005
Host Link, 1:N NT Link, Noprotocol, Serial PLC Link
0.030
Slave, Serial PLC Link Master,
Serial Gateway converted to
CompoWay/F, and Tool Bus *
0.075
Model
Standards
24 V
−
CP1W-CIF01
−
CP1W-CIF11
−
CP1W-CIF12
UC1, N, L,
CE
Note: It is not possible to use a CP-series Ethernet Option Board (CP1W-CIF41), LCD Option Board (CP1W-DAM01) with a CJ2M CPU Unit.
* The following modes cannot be used: 1:1 NT Link, Serial Gateway converted to Host Link FINS, 1:1 Link Master, and 1:1 Link Slave.
2
CJ2M-CPU3@/-CPU1@/-MD21@
Pulse I/O Modules (Only CJ2M CPU Unit with Unit Version 2.0 or Later)
Optional Pulse I/O Modules can be mounted to enable pulse I/O. Up to two Pulse I/O Modules can be mounted to the left side of a CJ2M CPU Unit.
Product name
Current
consumption (A)
Specifications
5V
Model
Standards
24 V
Pulse I/O Modules Sinking outputs, MIL connector
10 inputs (including four interrupt/quickresponse inputs and two high-speed counter inputs) 0.08
6 outputs (including two pulse outputs and two PWM outputs)
---
Sourcing outputs, MIL connector
10 inputs (including four interrupt/quickresponse inputs and two high-speed counter inputs) 0.08
6 outputs (including two pulse outputs and two PWM outputs)
---
CJ2M-MD211
UC1, N, L,
CE
CJ2M-MD212
Note: Connectors are not provided with Pulse I/O Modules. Purchase the following Connector, an OMRON Cable with Connectors for Connector
Terminal Block Conversion Units, or an OMRON Cable with Connectors for Servo Relay Units.
Connecting to Pulse I/O Modules
On wiring, refer to Pulse I/O Modules Connector Wiring Methods.
Product name
Specifications
Model
Standards
Applicable Connector
MIL Flat Cable Connectors (Pressure-fitted Connectors)
XG4M-4030-T
---
Slim type (M3 screw terminals, 40-pin)
XW2D-40G6
Through type (M3 screw terminals, 40-pin)
Connector-Terminal Block Conversion
Units
XW2B-40G4
Through type (M3.5 screw terminals, 40-pin)
--XW2B-40G5
Cable for Connector-Terminal Block
Conversion Unit
Cable length: 1 m
XW2Z-100K
Cable length: 1.5 m
XW2Z-150K
Cable length: 2 m
XW2Z-200K
Cable length: 3 m
XW2Z-300K
Cable length: 5 m
XW2Z-500K
Servo Relay Unit for 1 axis
XW2B-20J6-8A
Servo Relay Units
---
Servo Relay Unit for 2 axes
XW2B-40J6-9A
3
CJ2M-CPU3@/-CPU1@/-MD21@
Product name
Specifications
Cable for Pulse I/O Modules
Model
Cable length: 0.5 m
XW2Z-050J-A33
Cable length: 1 m
XW2Z-100J-A33
Cable length: 1 m
XW2Z-100J-B31
Cable length: 2 m
XW2Z-200J-B31
Cable length: 0.5 m
XW2Z-050J-A33
Cable length: 1 m
XW2Z-100J-A33
Cable length: 1 m
XW2Z-100J-B32
Cable length: 2 m
XW2Z-200J-B32
Cable length: 1 m
XW2Z-100J-A26
Cable length: 1 m
XW2Z-100J-B17
Cable length: 2 m
XW2Z-200J-B17
Cable length: 1 m
XW2Z-100J-A26
Cable length: 1 m
XW2Z-100J-B5
Cable length: 2 m
XW2Z-200J-B5
Cable length: 0.5 m
XW2Z-050J-A27
Cable length: 1 m
XW2Z-100J-A27
Cable length: 1 m
XW2Z-100J-B4
Cable length: 2 m
XW2Z-200J-B4
Standards
OMNUC G5/G Series
Servo Driver Connecting Cables
Cable for Pulse I/O Modules
SMARTSTEP2
Servo Driver Connecting Cables
Cable for Pulse I/O Modules
Cables for Servo Relay Units
SMARTSTEP Junior
--Servo Driver Connecting Cables
Cable for Pulse I/O Modules
SMARTSTEP A Series
Servo Driver Connecting Cables
Cable for Pulse I/O Modules
OMNUC W Series
Servo Driver Connecting Cables
4
CJ2M-CPU3@/-CPU1@/-MD21@
Accessories
The following accessories come with CPU Unit:
Item
Specification
Battery
CJ1W-BAT01
End Cover
CJ1W-TER01 (necessary to be mounted at the right end of CPU Rack)
End Plate
PFP-M (2 pcs)
Serial Port (RS-232C) Connector
(see note)
Connector set for serial port connection (D-SUB 9-pin male connector)
Note: Connector is provided with CJ2M-CPU1@.
General Specifications
CJ2M-
Item
CPU1@
CPU3@
Enclosure
Mounted in a panel
Grounding
Less than 100 Ω
CPU Unit Dimensions
90 mm × 75 mm × 31 mm
90 mm × 75 mm × 62 mm
Weight
130 g or less
190 g or less (see note)
5 VDC, 0.5 A
5 VDC, 0.7 A
Current Consumption
Operation
Environment
Battery
Ambient Operating Temperature
0 to 55°C
Ambient Operating Humidity
10% to 90% (with no condensation)
Atmosphere
Must be free from corrosive gases.
Ambient Storage Temperature
−20 to 70°C (excluding battery)
Altitude
2,000 m or less
Pollution Degree
2 or less: Conforms to JIS B3502 and IEC 61131-2.
Noise Immunity
2 kV on power supply line (Conforms to IEC 61000-4-4.)
Overvoltage Category
Category II: Conforms to JIS B3502 and IEC 61131-2.
EMC Immunity Level
Zone B
Vibration Resistance
Conforms to IEC60068-2-6
5 to 8.4 Hz with 3.5-mm amplitude, 8.4 to 150 Hz
Acceleration of 9.8 m/s2 for 100 min in X, Y, and Z directions (10 sweeps of 10 min each =
100 min total)
Shock Resistance
Conforms to IEC60068-2-27
147 m/s2, 3 times in X, Y, and Z directions (100 m/s2 for Relay Output Units)
Life
5 years at 25°C
Model
CJ1W-BAT01
Applicable Standards
Conforms to cULus, NK, LR, and EC Directives.
Note: Without a Serial Option Board.
5
CJ2M-CPU3@/-CPU1@/-MD21@
Performance Specifications
Items
User Memory
I/O Bits
Overhead Processing Time *1
Processing
Speed
Execution Time
I/O Interrupts and
External Interrupts
Interrupts
Scheduled
Interrupts
Maximum Number of Connectable Units
Basic I/O Units
Special I/O Units
CPU Bus Units
Pulse I/O Modules
Slots for which interrupts can be
used
Maximum Number of Expansion Racks
I/O Area
Link Area
CPU Bus Unit Area
Special I/O Unit Area
CIO Area
Pulse I/O Area
Serial PLC Link Words
DeviceNet Area
Internal I/O Area
Work Area
Holding Area
Auxiliary Area
Temporary Area
Timer Area
Counter Area
DM Area
EM Area
Force-S/R Enabled Banks *2
Index Registers
Cyclic Task Flag Area
Memory Card
Operating Modes
CJ2MCPU11/31
CPU12/32
CPU13/33
CPU14/34
CPU15/35
5K steps
10K steps
20K steps
30K steps
60K steps
2,560 bits
Normal Mode:
CJ2M-CPU3@: 270 μs
CJ2M-CPU1@: 160 μs
Basic Instructions : 0.04 μs min.
Special Instructions : 0.06 μs min.
Interrupt task startup time: 31 μs
Return time to cyclic task : 10 μs
Minimum time interval : 0.4 ms (set in 0.1 ms increments)
Interrupt task startup time: 30 μs
Return time to cyclic task : 11 μs
Total per CPU Rack or Expansion Rack: 10 Units max.;
Total per PLC: 40 Units max.
No limit
However, a maximum of two CJ1W-INT01 Interrupt Input Units can be mounted.
Units for up to 96 unit numbers can be mounted. (Unit numbers run from 0 to 95. Units are allocated between
1 and 8 unit numbers.)
CJ2M-CPU3@: 15 Units max.
CJ2M-CPU1@: 16 Units max.
2 Units max. *
* Supported only by CJ2M CPU Units with unit version 2.0 or later. A Pulse I/O Module must be mounted.
Slots 0 to 4 on CPU Rack
3 max.
2,560 bits (160 words) : Words CIO 0000 to CIO 0159
3,200 bits (200 words) : Words CIO 1000 to CIO 1199
6,400 bits (400 words) : Words CIO 1500 to CIO 1899
15,360 bits (960 words): Words CIO 2000 to CIO 2959
20 inputs, 12 outputs (CIO 2960 to CIO 2963)
1,440 bits (90 words) : Words CIO 3100 to CIO 3189
9,600 bits (600 words) : Words CIO 3200 to CIO 3799
3,200 bits (200 words) : Words CIO 1300 to CIO 1499 (Cannot be used for external I/O.)
37,504 bits (2,344 words): Words CIO 3800 to CIO 6143 (Cannot be used for external I/O.)
8,192 bits (512 words): Words W000 to W511 (Cannot be used for external I/O.)
8,192 bits (512 words): Words H000 to H511
Bits in this area maintain their ON/OFF status when PLC is turned OFF or operating mode is changed.
Words H512 to H1535: These words can be used only for function blocks. They can be used only for function
block instances (i.e., they are allocated only for internal variables in function blocks).
Read-only: 31,744 bits (1,984 words)
• 7,168 bits (448 words): Words A0 to A447
• 24,576 bits (1,536 words): Words A10000 to A11535 *
Read/write: 16,384 bits (1,024 words) in words A448 to A1471 *
* A960 to A1471 and A10000 to A11535 cannot be accessed by CPU Bus Units, Special I/O Units, PTs, and
Support Software that do not specifically support the CJ2 CPU Units.
16 bits: TR0 to TR15
4,096 timer numbers (T0000 to T4095 (separate from counters))
4,096 counter numbers (C0000 to C4095 (separate from timers))
32k words *
• DM Area words for Special I/O Units: D20000 to D29599 (100 words × 96 Units)
• DM Area words for CPU Bus Units: D30000 to D31599 (100 words × 16 Units)
* Bits in the EM Area can be addressed either by bit or by word. These bits cannot be addressed by CPU Bus
Units, Special I/O Units, PTs, and Support Software that do not specifically support the CJ2 CPU Units.
32k words/bank × 4 banks max.: E00_00000 to E3_32767 max. *
* Bits in the EM Area can be addressed either by bit or by word. These bits cannot be addressed by CPU Bus
Units, Special I/O Units, PTs, and Support Software that do not specifically support the CJ2 CPU Units.
32K words × 1 bank
32K words × 4 banks
Bank 0 hex
Bank 0 to 3 hex
IR0 to IR15
These are special registers for storing PLC memory addresses for indirect addressing. (Index Registers can
be set so that they are unique in each task or so that they are shared by all tasks.)
128 flags
128 MB, 256 MB, or 512 MB
PROGRAM Mode: Programs are not executed. Preparations can be executed prior to program execution in
this mode.
MONITOR Mode: Programs are executed, and some operations, such as online editing, and changes to
present values in I/O memory, are enabled in this mode.
RUN Mode:
Programs are executed. This is the normal operating mode.
*1. The following time must be added when using EtherNet/IP tag data links for the CJ2M-CPU3@.
100 μs + (Number of words transferred × 1.8 μs)
The following time must be added when using Pulse I/O Modules with a CJ2M CPU Unit:
10 μs × Number of Pulse I/O Modules
*2. Force-setting/resetting bits in the EM Area is possible only for banks specified for the EM Area force-set/reset function.
6
CJ2M-CPU3@/-CPU1@/-MD21@
CJ2M-
Items
CPU11/31
CPU12/32
Execution Mode
Normal Mode
Programming Languages
Ladder Logic (LD),
Sequential Function Charts (SFC),
Structured Text (ST), and
Instruction Lists (IL)
Function
Blocks
CPU13/33
CPU14/34
Maximum number of definitions
256
2,048
Maximum number of instances
256
2,048
FB Program Area
20K steps
Type of Tasks
Cyclic tasks
Interrupt tasks (Power OFF interrupt tasks, scheduled interrupt tasks, I/O interrupt tasks, and external interrupt
tasks, and input interrupt tasks *3)
Number of Tasks
Cyclic tasks: 128
Interrupt tasks: 256
(Interrupt tasks can be defined as cyclic tasks to create extra cyclic tasks. Therefore, the total number of cyclic
tasks is actually 384 max.)
Type of Symbols
• Local symbols: Can be used only within a single task in the PLC.
• Global symbols: Can be used in all tasks in the PLC.
• Network symbols (tags)*: I/O memory in the CPU Unit can be externally accessed using symbols,
depending on parameter settings.
* Supported only by the CJ2M-CPU3@.
Tasks
Data Type of Symbols
Symbols
(Variables)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
BOOL (bit)
UINT (one-word unsigned binary)
UDINT (two-word unsigned binary)
ULINT (four-word unsigned binary)
INT (one-word signed binary)
DINT (two-word signed binary)
LINT (four-word signed binary)
UINT BCD (one-word unsigned BCD) *4
UDINT BCD (two-word unsigned BCD) *4
ULINT BCD (four-word unsigned BCD) *4
REAL (two-word floating-point)
LREAL (four-word floating-point)
CHANNEL (word) *4
NUMBER (constant or number) *4
WORD (one-word hexadecimal)
DWORD (two-word hexadecimal)
LWORD (four-word hexadecimal)
STRING (1 to 255 ASCII characters)
TIMER (timer) *5
COUNTER (counter) *5
User defined data types (data structures)
Maximum Size of Symbol
32k words
Array Symbols (Array Variables)
One-dimensional arrays
Number of Array Elements
32,000 elements max.
Number of Registrable Network
Symbols (Tags) *6
2,000 max.
Length of Network Symbol (Tag)
Name *6
255 bytes max.
Encoding of Network Symbols (Tags) *6
UTF-8
Memory Capacity
8,000 words (Up to 32k words × 4 banks when EM is specified in CX-Programmer)
Number of Samplings
Bits = 31, one-word data =16, two-word data = 8, four-word data = 4
Sampling Cycle
1 to 2,550 ms (Unit: 1 ms)
Trigger Conditions
ON/OFF of specified bit
Data comparison of specified word
Data size: 1 word, 2 words, 4 words
Comparison Method: Equals (=), Greater Than (>), Greater Than or Equals (≥), Less Than (<), Less Than or
Equals (≤), Not Equal (≠)
Data
Tracing
−32,768 to +32,767 ms
Delay Value
File Memory
Memory Card (128, 256, or 512 Mbytes) (Use the Memory Cards provided by OMRON.)
EM file memory (Part of the EM Area can be converted for use as file memory.)
Source/
Comment
Memory
Capacity: 1 Mbytes
Function block program memory,
comment file, program index file,
symbol tables
Logical Ports for
Communications
Communications
CPU15/35
CIP
Communications
Specification
Logical Ports
8 ports (Used for SEND, RECV, CMND, PMCR, TXDU, and RXDU instructions.)
Extended Logical
Ports
64 ports (Used for SEND2, RECV2, CMND2, and PMCR2 instructions.)
Class 3
Number of connections: 64
(Connection Type)
UCMM (Nonconnection Type)
Maximum number of clients that can communicate at the same time: 32
Maximum number of servers that can communicate at the same time: 40
*3. Supported only by CJ2M CPU Units with unit version 2.0 or later. A Pulse I/O Module must be mounted.
*4. Cannot be used in Function blocks.
*5. Can be used only in Function blocks.
*6. Supported only by the CJ2M-CPU3@.
7
CJ2M-CPU3@/-CPU1@/-MD21@
CJ2M-
Item
Peripheral (USB) Port
CPU11/31
CPU13/33
12 Mbps max.
Transmission Distance
5 m max.
Half-duplex
Synchronization Method
Start-stop
Baud Rate
0.3, 0.6, 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6, or 115.2 (kbps)
Transmission Distance
15 m max.
Transmission Specifications
CPU15/35
• CJ2M-CPU1@ interface: Conforms to EIA RS-232C.
• CJ2M-CPU3@: No serial ports with default system
One of the following Serial Option Boards can be mounted.
• CP1W-CIF01 RS-232C Option Board
• CP1W-CIF11 RS-422A/485 Option Board (not isolated, max. transmission distance: 50 m)
• CP1W-CIF12 RS-422A/485 Option Board (isolated, max. transmission distance: 500 m)
Communications Method
EtherNet/IP Port *7
CPU14/34
USB 2.0-compliant B-type connector
Baud Rate
Serial Port
CPU12/32
−
Media Access Method
CSMA/CD
Modulation
Baseband
Transmission Paths
Star
Baud Rate
100 Mbps (100Base-TX)
Transmission Media
Shielded twisted-pair (STP) cable; Categories: 5, 5e
Transmission Distance
100 m (between ethernet switch and node)
Number of Cascade Connections
No restrictions if ethernet switch is used.
CIP Communications: Tag Data Links
Number of Connections
32
Packet Interval (Refresh period)
1 to 10,000 ms (Unit: 0.5 ms)
Can be set for each connection. (Data will be refreshed at the set interval, regardless of the number
of nodes.)
Permissible Communications Band 3,000 packets per second *8
Communications Specifications
Communications
Number of Registerable Tag
32
Type of Tags
CIO, DM, EM, HR, WR, and Network symboles
Number of Tags per Connection
8 (Seven tags if PLC status is included in the segment.)
Maximum Link Data Size per Node
640 words
Maximum Data Size per Connection
20 words
(Data is synchronized within each connection.)
Number of Registrable Tag Set
32 (1 connection = 1 segment)
Maximum Tag Set Size
20 words (One word is used when PLC status is included in the segment.)
Maximum Number of Tags
Refreshable in a Single Cycle of
CPU Unit *9
Output/send (CPU Unit to EtherNet/IP): 32
Input/receive (EtherNet/IP to CPU Unit): 32
Data Size Refreshable in a Single
Cycle of CPU Unit *9
Output/send (CPU to EtherNet/IP) : 640 words
Input/receive (EtherNet/IP to CPU): 640 words
Change of Tag Data Link Parameter
Settings during Operation
OK *10
Multi-cast Packet Filter *11
CIP Communications: Explicit
Messages
OK
−
Class 3 (Connection Type)
Number of connections: 128
UCMM (Non-connection Type)
Maximum number of clients that can communicate at the same time : 16
Maximum number of servers that can communicate at the same time: 16
CIP Routing
OK
(CIP routing is enabled for the following remote Units: CJ1W-EIP21, CJ2H-CPU6@-EIP, CJ2MCPU3@, and CS1W-EIP21.)
FINS Communications
−
FINS/UDP
OK
FINS/TCP
16 connections max.
EtherNet/IP Conformance Test
Conforms to A5.
EtherNet/IP Interface
10Base-T/100Base-TX
Auto Negotiation/Fixed Setting
*7. The EtherNet/IP port is built into CJ2M-CPU3@ only.
*8. "Packets per second" is the number of communications packets that can be processed per second.
*9. If the maximum number is exceeded, refreshing will require more than one CPU Unit cycle.
*10.When changing parameters, however, the EtherNet/IP port where the change is made will be restarted. In addition, a timeout will temporarily
occur at the other node that was communicating with that port, and it will then recover automatically.
*11.The EtherNet/IP port supports an IGMP client, so unnecessary multicast packets are filtered by using an Ethernet switch that supports IGMP
snooping.
8
CJ2M-CPU3@/-CPU1@/-MD21@
Function Specifications
Functions
Cycle Time
Management
Minimum Cycle Time
Cycle Time Monitoring
The cycle time is monitored.
(0.01 to 40,000 ms; Unit: 0.01 ms)
Background Processing
Instructions with long execution times can be executed over multiple cycles to prevent
fluctuations in the cycle time.
Basic I/O Units,
Special I/O
Units, and CPU
Bus Units
Unit (I/O)
Management
Description
A minimum cycle time can be set.
(0.2 to 32,000 ms; Unit: 0.1 ms)
The minimum cycle time setting can be changed in MONITOR mode.
Basic I/O Units
Special I/O
Units and CPU
Bus Units
Configuration
Management
I/O Refreshing
Cyclic Refreshing
Cyclic refreshing of Basic I/O Units, Special I/O Units, and CPU Bus Units
Immediate
Refreshing
I/O refreshing by immediate refreshing instructions
Refreshing by
IORF
I/O refreshing by IORF instruction
Unit Recognition at Startup
The number of units recognized when the power is turned ON is displayed.
Input Response Time Setting
The input response times can be set for Basic I/O Units. The response time can be
increased to reduce the effects of chattering and noise at input contacts. The response
time can be decreased to enable detecting shorter input pulses.
Load OFF Function
All of the outputs on Basic I/O Units can be turned OFF when an error occurs in RUN or
MONITOR mode.
Basic I/O Unit Status Monitoring
Alarm information can be read from Basic I/O Units and the number of Units recognized
can be read.
Reading/writing data using
instructions for specific Units
Special instructions can be used to read/write required data for specific Units at high
speed.
Unit Restart Bits to Restart Units
A Special I/O Unit or CPU Bus Unit can be restarted.
Automatic I/O Allocation at Startup
I/O words can be automatically allocated to the Basic I/O Units that are connected in the
PLC to start operation automatically without registering Units into I/O tables.
I/O Table Creation
The current unit configuration can be registered in I/O tables to prevent it from being
changed, to reserve words, and to set words.
Rack/Slot First Word Settings
The first words allocated to a Units on the Racks can be set.
The status of I/O memory can be held when the operating mode is changed or power is
Holding I/O Memory when Changing Operating Modes turned ON. The forced-set/reset status can be held when the operating mode is changed
or power is turned ON.
Memory
Management
Memory
Cards
File Memory
Files (such as program files, data files, and symbol table files) can be stored in Memory
Card, EM File Memory, or Comment Memory.
Built-in Flash Memory
The user program and Parameter Area can be backed up to an internal flash memory
when they are transferred to the CPU Unit.
EM File Function
Parts of the EM Area can be treated as file memory.
Storing Comments
I/O comments can be stored as symbol table files in a Memory Card, EM file memory,
or comment memory.
EM Configuration
EM Area can be set as trace memory or EM file memory.
Automatic File Transfer at Startup
A program file and parameter files can be read from a Memory Card when the power is
turned ON.
Program Replacement during PLC Operation
User programs can be transferred from a Memory Card to CPU Unit during operation.
Function for Reading and Writing Data from a Memory
Card
Data in I/O memory in the CPU Unit can be written to a Memory Card in CSV/TXT format.
Data in CSV/TXT format in the Memory Card can be read to I/O memory in the CPU Unit.
9
CJ2M-CPU3@/-CPU1@/-MD21@
Function
Peripheral (USB)
Port
Peripheral Bus
Serial Port (Option) *11
Bus for communications with various kinds of Support Software running on a personal
computer. High-speed communications are supported.
Application is possible when a Serial Communications Option Board is mounted.
Host Link (SYSWAY) Communications
Host Link commands or FINS commands placed between Host Link headers and terminators
can be sent from a host computer or PT to read/write I/O memory, read/control the operating
mode, and perform other operations for PLC.
No-protocol Communications
I/O instructions for communications ports (such as TXD/RXD instructions) can be used for
data transfer with peripheral devices such as bar code readers and printers.
NT Link Communications
I/O memory in the PLC can be allocated and directly linked to various PT functions, including
status control areas, status notification areas, touch switches, lamps, memory tables, and
other objects.
Peripheral Bus
Bus for communications with various kinds of Support Software running on a personal
computer. High-speed communications are supported.
Serial Gateway
This gateway enables receiving and automatically converting FINS to the CompoWay/F.
Serial PLC Links
Data is exchanged between CPU Units using serial ports without communications
programming. PTs set to the 1:N NT Link protocol can be included in the network.
EtherNet/IP Port *12
CIP
Tag Data Links
Communications
Message Communications
Service
FINS
Communications Message Communications
Service
Scheduled Interrupts
Interrupt
Description
−
Communications
100Base-TX/10Base-T
Protocols: TCP/IP, UDP, ARP, ICMP (ping only), BOOTP
Applications: FINS, CIP, SNTP, DNS (Client), FTP (Server)
Programless cyclic data exchanges with the devices on the EtherNet/IP network.
Any CIP commands can be received from the devices on the EtherNet/IP network.
Any FINS commands can be transferred with the devices on the EtherNet/IP network.
Tasks can be executed at a specified interval (minimum of 0.2 ms, Unit: 0.1 ms).
Resetting and restarting with MSKS(690)
When MSKS(690) is executed, the internal timer is restarted and the time to first interrupt is
set to a fixed value.
Reading present value of internal timer with
MSKS(690)
MSKS(690) can be used to read the time that has elapsed until the schedule interrupt is started
or since the previous scheduled interrupt.
Power OFF Interrupts
A task can be executed when CPU Unit's power turns OFF.
I/O Interrupt Tasks
A task can be executed when an input signal is input to an Interrupt Input Unit.
External Interrupt Tasks
A task can be executed when interrupts are requested from a Special I/O Unit or a CPU Bus Unit.
Clock Function
Clock data is stored in memory.
Accuracy (Accuracy depends on the temperature.)
Ambient temperature of 55°C : −3.5 to +0.5 min error per month
Ambient temperature of 25°C : −1.5 to +1.5 min error per month
Ambient temperature of 0°C : −3 to +1 min error per month
Operation Start Time Storage
The time when operating mode was last changed to RUN mode or MONITOR mode is stored.
Operation Stop Time Storage
The last time a fatal error occurred or the last time the operating mode was changed to
PROGRAM mode is stored.
Startup Time Storage
The time when the power was turned ON is stored.
Power Interruption Time Storage
The time when the power is turned OFF is stored.
Total Power ON Time Calculation
The total time that the PLC has been ON is stored in increments of 10 hours.
Power ON Clock Data Storage
A history of the times when the power was turned ON is stored.
User Program Overwritten Time Storage
The time that the user program was last overwritten is stored.
Parameter Date Storage
The time when the Parameter Area was overwritten is stored.
Memory Protection
Holding Area data, DM Area data, EM Area data, Counter Completion Flags, and counter
present values are held even when power is turned OFF. CIO Area, Work Area, some Auxiliary
Area data, and Timer Completion Flags, timer present values, index registers, and data
registers can be protected by turning ON the IOM Hold Bit in the Auxiliary Area, and by also
setting the IOM Hold Bit to “Hold” in the PLC Setup.
Clock
Power
Supply
Management Power OFF Detection Time Setting
The detection time for power interruptions can be set.
AC power supply: 10 to 25 ms (variable)
DC power supply: 2 to 5 ms (CJ1W-PD022) or 2 to 20 ms (CJ1W-PD025)
Power OFF Detection Delay Time
The detection of power interruptions can be delayed: 0 to 10 ms
(Not supported by the CJ1W-PD022.)
Number of Power Interruptions Counter
The number of times power has been interrupted is counted.
*12.A Serial Option Board is required to use a serial port for the CJ2M-CPU3@ CJ2M CPU Unit.
*13.Supported only by the CJ2M-CPU3@.
10
CJ2M-CPU3@/-CPU1@/-MD21@
Function
Function Blocks
Description
Standard programming can be encapsulated as function blocks.
Languages in Function Block Definitions
Ladder programming or structured text
Online Editing
The program can be changed during operation (in MONITOR or PROGRAM mode), except for
block programming areas.
Force-Set/Reset
Specified bits can be set or reset.
Force-set/reset to the EM Area is enabled by specifying a start bank in parameter setting.
Differentiate Monitoring
ON/OFF changes in specified bits can be monitored.
Data Tracing
The specified I/O memory data can be stored in the trace memory in the CPU Unit. The
triggers can be set.
Debugging
Continuous Tracing
The trace data can be uploaded during data tracing using CX-Programmer, which enables
continuously logging the data by constantly uploading the trace data.
Automatically starting tracing when operation
starts
Data tracing can be automatically started when operation is started (i.e., when the operating
mode is changed from PROGRAM mode to MONITOR or RUN mode).
Storing Location of Error when an Error Occurs
The location and task number where execution stopped for a program error is recorded.
Program Check
The programs can be checked for items such as no END instruction and FALS/FAL errors at
startup.
Error Log
A function is provided to store predefined error codes in CPU Unit, error information, and time
at which the error occurred.
CPU Error Detection
CPU Unit WDT errors are detected.
User-defined Failure Diagnosis
Errors can be generated for user-specified conditions: Non-fatal errors (FAL) and fatal errors
(FALS).
Program section time diagnosis and program section logic diagnosis are supported (FPD
instruction).
Load OFF Function
This function turns OFF all outputs from Output Units when an error occurs.
RUN Output
The RUN output from the CJ1W-PA205R turns ON while CPU Unit is in RUN mode or
MONITOR mode.
Basic I/O Load Short-circuit Detection
This function provides alarm information from Basic I/O Units that have load short-circuit
protection.
Failure Point Detection
The time and logic of an instruction block can be analyzes using the FPD instruction.
CPU Standby Detection
This function indicates when the CPU Unit is on standby because all Special I/O Units and
CPU Bus Units have not been recognized at the startup in RUN or MONITOR mode.
System FAL Error Detection This function generates a non-fatal (FAL) error when the user-defined conditions are met in
(User-defined non-fatal error) program.
Duplicate Refreshing Error
Detection
This function detects an error when an immediate refreshing Instruction in an interrupt task is
competing with I/O refreshing of a cyclic task.
Basic I/O Unit Error Detection This function detects the errors in Basic I/O Units.
Selfdiagnosis
and
Restoration
Non-fatal Error
Detection
Backup Memory Error
Detection
This function detects errors in the memory backup of the user programs and parameter area
(backup memory).
PLC Setup Error Detection
This function detects setting errors in the PLC Setup.
CPU Bus Unit Error Detection
This function detects an error when there is an error in data exchange between the CPU Unit
and a CPU Bus Unit.
Special I/O Unit Error
Detection
This function detects an error when there is an error in data exchange between the CPU Unit
and a Special I/O Unit.
Tag Memory Error Detection *13
This function detects errors in tag memory.
Battery Error Detection
This function detects an error when a battery is not connected to the CPU Unit or when the
battery voltage drops.
CPU Bus Unit Setting Error
Detection
This function detects an error when the model of a CPU Bus Unit in the registered I/O tables
does not agree with the model that is actually mounted in the PLC.
Special I/O Unit Setting Error
Detection
This function detects an error when the model of a Special I/O Unit in the registered I/O tables
does not agree with the model of Unit that is actually mounted.
Option Board Error Detection *13 This function detects the errors in Serial Option Board mounting status.
Fatal Error
Detection
Memory Error Detection
This function detects errors that occur in memory of the CPU Unit.
I/O Bus Error Detection
This function detects when an error occurs in data transfers between the Units mounted in
Rack slots and the CPU Unit and detects when the End Cover is not connected to the CPU
Rack or an Expansion Rack.
Unit/Rack Number
Duplication Error
This function detects an error when the same unit number is set for two or more Units, the
same word is allocated to two or more Basic I/O Units, or the same rack number is set for two
or more Racks.
Too Many I/O Points Error
Detection
This function detects an error when the total number of I/O points set in the I/O tables or the
number of Units per Rack exceeds the specified range.
I/O Setting Error Detection
This function detects an error when the number of Units in the registered I/O tables does not
agree with the actual number of Units that is mounted, or an Interrupt Unit has been connected
in the wrong position, i.e., not in slot 0 to 4.
*14.Supported only by the CJ2M-CPU3@.
11
CJ2M-CPU3@/-CPU1@/-MD21@
Function
Description
Program Error Detection
Fatal Error
Detection
Selfdiagnosis
and
Restoration
Fatal Error
Detection
(Continued from
previous page)
Maintenance
Instruction Processing
Error Detection
This function detects an error when the given data value is invalid when executing an
instruction, or execution of instruction between tasks was attempted.
Indirect DM/EM BCD
Error Detection
This function detects an error when an indirect DM/EM address in BCD mode is not BCD.
Illegal Area Access Error
Detection
This function detects an error when an attempt is made to access an illegal area with an
instruction operand.
No END Error Detection
This function detects an error when there is no END instruction at the end of the program.
Task Error Detection
This function detects an error when there are no tasks that can be executed in a cycle, there
is no program for a task, or the execution condition for an interrupt task was met but there is
no interrupt task with the specified number.
Differentiation Overflow
Error Detection
This function detects an error when too many differentiated instructions are entered or deleted
during online editing (131,072 times or more).
Invalid Instruction Error
Detection
This function detects an error when an attempt is made to execute an instruction that is not
defined in the system.
User Program Area
Overflow Error Detection
This function detects an error when instruction data is stored after the last address in user
program area.
Cycle Time Exceeded Error
Detection
This function monitors the cycle time (10 to 40,000 ms) and stops the operation when the set
value is exceeded.
System FALS Error Detection
(User-defined Fatal Error)
This function generates a fatal (FALS) error when the user-defined conditions are met in
program.
Version Error Detection
This function detects an error when a user program includes a function that is not supported
by the current unit version.
Memory Card Transfer Error
Detection
This function detects an error when the automatic file transfer from Memory Card fails at
startup.
Simple Backup Function
This function collectively backs up the data in CPU Unit (user programs, parameters, and I/O
memory) and internal backup data in the I/O Units.
Unsolicited Communications
A function that allows the PLC to use Network Communications Instruction to send required
FINS commands to a computer connected via a Host Link
Remote Programming and Monitoring
Host Link communications can be used for remote programming and remote monitoring
through a Controller Link, Ethernet, DeviceNet, or SYSMAC LINK Network. Communications
across network layers can be performed.
Controller Link or Ethernet : 8 layers
DeviceNet or SYSMAC LINK : 3 layers
Automatic Online Connection via
Network
Security
This function detects errors in programs.
Direct
Serial
Connection
This function enables automatically connecting to the PLC online when the CX-Programmer
is directly connected by a serial connection (peripheral (USB) port or serial port).
Via
Networks
This function enables connecting the CX-Programmer online to a PLC that is connected via an
EtherNet/IP network.
Read Protection using Password
This function protects reading and displaying programs and tasks using passwords.
Write protection: Set using the DIP switch.
Read protection: Set a password using the CX-Programmer.
FINS Write Protection
This function prohibits writing by using FINS commands sent over the network.
Unit Name Function
This function allows the users to give any names to the Units. Names are verified at online
connection to prevent wrong connection
Hardware ID Using Lot Numbers
This function sets operation protection by identifying hardware using the user programs
according to lot numbers stored in the Auxiliary Area.
12
CJ2M-CPU3@/-CPU1@/-MD21@
Specifications for Pulse I/O Functions
The following functions of CJ2M can be used by installing one or two Pulse I/O Modules. Each module has 10 high-speed inputs and 6 high-speed
outputs. Pulse I/O Modules can be installed on CJ2M CPU Units with Unit Version 2.0 or Later.
• The inputs can be used as general-purpose inputs, interrupt inputs, quick-response inputs, high-speed counters, or origin search inputs.
• The outputs can be used as general-purpose outputs, pulse outputs, origin search outputs, or PWM outputs.
One Pulse I/O Module can be mounted
CJ2M CPU Unit
(Standard or Simple Model)
Pulse I/O Module
Connected
Pulse I/O Module 0
Two Pulse I/O Modules can be mounted
Pulse I/O Module
Connected
Pulse I/O Module 1
CJ2M CPU Unit
(Standard or Simple Model)
Connected
Pulse I/O Module 0
Note: The Pulse I/O Module closest
to the CPU Unit is Pulse I/O
Module 0 and the other one
is Pulse I/O Module 1.
Performance Specifications
Item
Model of Pulse I/O Modules
External Interface
Pulse Inputs
Normal Inputs
Interrupt Inputs and
Quick-response Inputs
High-speed Counter Inputs
Pulse I/O
Pulse Outputs
Normal Outputs
Pulse Outputs
PWM Outputs
Description
CJ2M-MD211 (Sinking-type)
CJ2M-MD212 (Sourcing-type )
40-pin MIL connector
Can be used as normal inputs, interrupt inputs, quick-response inputs, or high-speed counter inputs.
(Function of each input must be selected in the PLC Setup.)
Input method: Line-driver input or 24-VDC input (selected by wiring)
20 max. (10 per Pulse I/O Module)
Input constants: Set in the PLC Setup (0, 0.5, 1, 2, 4, 8, 16, or 32 ms). Default: 8 ms
8 max. (4 per Pulse I/O Module)
Input signal minimum ON pulse width: 30 μs
4 max. (2 per Pulse I/O Module)
Input method: Differential-phase (×4) pulses, pulse + direction, up/down pulses, or increment pulse
Maximum response frequency: 50 kHz for differential phases or 100 kHz for single phase
Counting mode: Linear mode or circular (ring) mode
Count value: 32 bits
Counter reset: Phase Z + software reset or software reset
Control method: Target-value comparison or range comparison
Gate function: Supported
Can be used as normal outputs, pulse outputs, or PWM outputs. (Function of each output must be selected
in the PLC Setup.)
Output method: Sinking or sourcing transistor outputs (The method is determined by Pulse I/O Module model.)
12 max. (6 per Pulse I/O Module)
4 max. (2 per Pulse I/O Module)
Output method: CW/CCW or pulse + direction (The method is determined by the I/O wiring and the
instructions used in the ladder program.)
Output frequency: 1 pps to 100 kpps (in increments of 1 pps)
Output Mode: Continuous mode (for speed control) or independent mode (for position control)
Output pulses: Relative coordinates: 0000 0000 to 7FFF FFFF hex (0 to 2,147,483,647 pulses)
Absolute coordinates: 8000 0000 to 7FFF FFFF hex (−2,147,483,648 to 2,147,483,647)
Acceleration/deceleration curves: Linear or S-curve
Origin search function: Supported
4 max. (2 per Pulse I/O Module)
Output frequency: 0.1 to 6,553.5 Hz (in 0.1-Hz increments) or 1 to 32,800 Hz (in 1-Hz increments)
Duty ratio: 0.0% to 100.0% (in 0.1% increments)
Function Specifications
Pulse I/O
Functions
Functions
Normal Inputs
Pulse Input Interrupt Inputs
Functions
Quick-response Inputs
High-speed Counter Inputs
Normal Outputs
Pulse
Output
Pulse Outputs
Functions
PWM Outputs
Origin Searches
Input Interrupt Function
Input Interrupts
Interrupt
High-speed Counter Interrupts
Description
Input signals are read during I/O refreshing and stored in I/O memory.
An interrupt task can be started when an input signal turns ON or turns OFF.
Input signals that are shorter than the cycle time are read and stored in I/O memory.
High-speed pulse signals are counted. Interrupt tasks can also be started.
The status of I/O memory is output during I/O refreshing.
A pulse signal is output with the specified frequency and number of pulses at a fixed duty ratio (50%).
A pulse signal is output at the specified duty ratio.
The origin point of the machine is determined according to the specified origin search parameters while
actually outputting pulses and using the origin and origin proximity input signals as conditions. (Pulse inputs
and outputs are also used for this function.)
A task is started for an interrupt input from a Pulse I/O Module or for a high-speed counter input.
Interrupt tasks are executed when the interrupt input turns ON or turns OFF.
Direct Mode: An interrupt task is executed each time an input signal changes.
Counter Mode: Changes in the input signal are counted up or down and the interrupt task is executed when
the counter counts out. (The maximum response frequency is 3 kHz.)
An interrupt task is executed when preset comparison conditions for a high-speed counter are met.
Target-value comparison: The interrupt task is executed when the count matches a specified value.
Range comparison: The interrupt task is executed when the count enters or leaves a specified range of values.
13
CJ2M-CPU3@/-CPU1@/-MD21@
Allocating Functions I/O signals
Pulse I/O Module 0 (on the right)
Terminal symbol
IN 00
IN 01
IN 02
IN 03
IN 04
IN 05
IN 06
IN 07
IN 08
IN 09
Address
2960
Bit
0
1
2
3
4
5
6
7
8
9
Normal inputs
Normal
input 0
Normal
input 1
Normal
input 2
Normal
input 3
Normal
input 4
Normal
input 5
Normal
input 6
Normal
input 7
Normal
input 8
Normal
input 9
Interrupt inputs
(Direct Mode/
Counter Mode)
Interrupt
input 0
Interrupt
input 1
Interrupt
input 2
Interrupt
input 3
Quick response
Inputs inputs
Quick
Quick
Quick
Quick
response response response response
input 0
input 1
input 2
input 3
0
1
2
3
4
5
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
Highspeed
counter 1
(phase-B,
decrement,
or direction
input)
Highspeed
counter 0
(phase-A,
increment,
or count
input)
Highspeed
counter 0
(phase-B,
decrement,
or direction
input)
---
---
---
---
---
---
High-speed
counters
---
---
Highspeed
counter 1
(phase- Z/
reset)
Normal outputs
---
---
---
---
---
---
---
---
---
---
Normal Normal Normal Normal Normal Normal
output 0 output 1 output 2 output 3 output 4 output 5
---
---
---
---
---
---
---
---
---
---
Pulse
Pulse
Pulse
Pulse
output 0 output 0 output 1 output 1
(CW)
(CCW) (CW)
(CCW)
---
---
---
---
---
---
---
---
---
---
---
---
Pulse
Pulse
Pulse
Pulse
output 0 output 1 output 0 output 1
pulse)
(pulse) (direction) (direction)
---
---
---
---
---
---
---
---
---
---
---
---
Origin
search 0
(Origin
Input
Signal)
Origin
search 0
(Origin
Proximity
Input
Signal)
Origin
search 1
(Origin
Input
Signal)
Origin
search 1
(Origin
Proximity
Input
Signal)
Origin
search 0
(Positio
ning
Complet
ed
Signal)
Origin
search 1
(Positio
ning
Complet
ed
Signal)
IN 12
IN 13
IN 14
IN 15
CW/CCW
outputs
Out
puts
OUT 00 OUT 01 OUT 02 OUT0 3 OUT 04 OUT 05
2961
Pulse +
Pulse
direction
out
outputs
puts
Variable
duty
ratio
outputs
Origin search
Highspeed
counter 0
(phase- Z/
reset)
---
---
Highspeed
counter 1
(phase-A,
increment,
or count
input)
---
---
---
---
IN 16
IN 17
IN 18
IN 19
---
---
---
---
---
---
---
PWM
PWM
output 0 output 1
---
Pulse
output 0
error
counter
reset
output
(operatio
n modes
1 and 2)
Pulse
output 1
error
counter
reset
output
(operatio
n modes
1 and 2)
Pulse I/O Module 1 (on the left)
Terminal symbol
IN 10
Address
2962
Bit
OUT 10 OUT 11 OUT 12 OUT 13 OUT 14 OUT 15
2963
0
1
2
3
4
Normal inputs
Normal
input 10
Normal
input 11
Normal
input 12
Normal
input 13
Normal Normal Normal Normal Normal Normal
input 14 input 15 input 16 input 17 input 18 input 19
Interrupt inputs
(Direct Mode/
Counter Mode)
Interrupt
input 4
Interrupt
input 5
Interrupt
input 6
Interrupt
input 7
Quick response
Inputs inputs
Quick
Quick
Quick
Quick
response response response response
input 4
input 5
input 6
input 7
5
6
7
8
9
0
1
2
3
4
5
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
Highspeed
counter 3
(phase-B,
decrement,
or direction
input)
Highspeed
counter 2
(phase-A,
increment,
or count
input)
Highspeed
counter 2
(phase-B,
decrement,
or direction
input)
---
---
---
---
---
---
High-speed
counters
---
---
Highspeed
counter 3
(phase- Z/
reset)
Normal outputs
---
---
---
---
---
---
---
---
---
---
Normal Normal Normal Normal Normal Normal
output 6 output 7 output 8 output 9 output 10 output 11
---
---
---
---
---
---
---
---
---
---
Pulse
Pulse
Pulse
Pulse
output 2 output 2 output 3 output 3
(CW)
(CCW) (CW)
(CCW)
---
---
---
---
---
---
---
---
---
---
---
---
Pulse
Pulse
Pulse
Pulse
output 2 output 3 output 2 output 3
pulse)
(pulse) (direction) (direction)
---
---
---
---
---
---
---
---
---
---
---
---
Origin
search 2
(Origin
Input
Signal)
Origin
search 2
(Origin
Proximity
Input
Signal)
Origin
search 3
(Origin
Input
Signal)
Origin
search 3
(Origin
Proximity
Input
Signal)
Origin
search 2
(Positio
ning
Complet
ed
Signal)
Origin
search 3
(Positio
ning
Complet
ed
Signal)
CW/CCW
outputs
Out
puts
IN 11
Pulse +
Pulse
direction
out
outputs
puts
Variable
duty
ratio
outputs
Origin search
Highspeed
counter 2
(phase- Z/
reset)
---
---
Highspeed
counter 3
(phase-A,
increment,
or count
input)
---
---
---
---
---
---
---
---
---
---
---
PWM
PWM
output 2 output 3
---
Pulse
output 2
error
counter
reset
output
(operatio
n modes
1 and 2)
Pulse
output 3
error
counter
reset
output
(operatio
n modes
1 and 2)
14
CJ2M-CPU3@/-CPU1@/-MD21@
Specifications of Pulse Input Functions
Interrupt Inputs
Item
Number of interrupt inputs
Direct Mode
Counter Mode
Max. 8 inputs
Allocated bit
CIO 2960 and CIO 2962, bits 00 to 03
Interrupt detection method
ON-to-OFF or OFF-to-ON transitions
Interrupt task numbers
140 to 147 (fixed)
Counting method
---
Incrimenting or decrementing
(Set with the MSKS(690) instruction.)
Counting range
---
0001 to FFFF hex (16 bits)
(Set in A532 to A535 and A544 to A547.)
Response frequency
---
Single-phase: 3 kHz x 8 inputs
Storage locations for PVs for interrupt inputs
in Counter Mode
---
A536 to A539 and A548 to A551
Quick-response inputs
Item
Specifications
Number of Quick-response inputs
Max. 8 inputs
Quick-response inputs
Signals that are shorter than the cycle time are latched for one PLC cycle, so they can be detected in the PLC program.
Minimum detectable pulse width is 30 μs.
High-speed Counter Inputs
Item
Description
Number of High-speed Counter Inputs
Max. 4 inputs
Pulse input method (counting mode)
Incremental pulse inputs
Differential phase input (4×) Up/down inputs
Pulse + direction inputs
Increment pulse
Phase A
Pulse
Input signals
Frequency and number of high-speed
counters
Counting mode
---
Phase B
Down pulse
Direction
---
Phase Z
Reset
Reset
100 kHz, 2 inputs × 2 I/O
Modules
50 kHz, 2 inputs × 2 I/O
Modules
100 kHz, 2 inputs
× 2 I/O Modules
100 kHz, 2 inputs
× 2 I/O Modules
Linear mode or ring mode
Linear mode:
Count value
Ring mode:
High-speed counter PV storage locations
8000 0000 to 7FFF FFFF hex
0000 0000 to FFFF FFFF hex (for increment pulse)
0000 0000 to Max. ring value
High-speed counter 0: A271 (upper 4 digits) and A270 (lower 4 digits)
High-speed counter 1: A273 (upper 4 digits) and A272 (lower 4 digits)
High-speed counter 2: A317 (upper 4 digits) and A316 (lower 4 digits)
High-speed counter 3: A319 (upper 4 digits) and A318 (lower 4 digits)
Refreshed during overseeing processing. Use PRV(881) to read the most recent PVs.
Data format: 8 digit hexadecimal
• Linear mode:
• Ring mode:
Control method
Up pulse
8000 0000 to 7FFF FFFF hex
0000 0000 to FFFF FFFF hex (for increment pulse)
0000 0000 to Max. ring value
Target value comparison
Up to 48 target values and corresponding interrupt task numbers can be registered.
Range Comparison
Up to 8 or up to 32 ranges can be registered, with a separate upper limit, lower limit, and interrupt task number for each
range.
Counter reset method
• Phase-Z + Software reset
The counter is reset when the phase-Z input goes ON while the Reset Bit (A531.00 to A531.03) is ON.
• Software reset
The counter is reset when the Reset Bit (A531.00 to A531.03) is turned ON.
Operation can be set to stop or continue the comparison operation when the high-speed counter is reset.
15
CJ2M-CPU3@/-CPU1@/-MD21@
Specifications of Pulse Output Functions
Position Control and Speed Control
Item
Specifications
Number of Pulse Outputs
Max. 4 outputs (Pulse Output 00 to 03)
Output mode
Continuous mode (for speed control) or independent mode (for position control)
Positioning (independent mode) instructions PULS (886) and SPED (885), PULS (886) and ACC (888), or PULS2 (887) instruction
Speed control (continuous mode)
instructions
SPED (885) and ACC (888) instructions
Origin (origin search and origin return)
instructions
ORG (889) instruction
Interrupt feeding instruction
IFEED (892) instruction
Output frequency
1 pps to 100 kpps (1 pps units), two pulse outputs × 2 Pulse I/O Modules
Frequency acceleration and deceleration
rates
Set in increments of 1 pps for acceleration/deceleration rates from 1 to 65,535 pps (every 4 ms).
The acceleration and deceleration rates can be set independently only with the PLS2 (887) instruction.
Changing SVs during instruction execution
The target frequency, acceleration/deceleration rate, and target position can be changed.
Pulse output method
CW/CCW or pulse + direction
Number of output pulses
Relative coordinates: 0000 0000 to 7FFF FFFF hex (Accelerating or decelerating in either direction: 2,147,483,647)
Absolute coordinates: 8000 0000 to 7FFF FFFF hex (−2,147,483,648 to 2,147,483,647)
Relative/absolute coordinate specifications
for pulse output PVs
Absolute coordinates are specified automatically when the origin location has been defined by changing the pulse
output PV with the INI (880) instruction or performing an origin search with the ORG(889) instruction. Relative
coordinates must be used when the origin is undefined.
Relative pulse/absolute pulse specifications
The pulse type can be specified with an operand in the PULS (886) or PLS2 (887) instruction.
Absolute pulses can be used when absolute coordinates are specified for the pulse output PV, i.e. the origin location
has been defined. Absolute pulse cannot be used when relative coordinates are specified, i.e., when the origin location
is undefined. An instruction error will occur.
Pulse output PV's storage location
The following Auxiliary Area words contain the pulse output PVs
Pulse output 0: A277 (leftmost 4 digits) and A276 (rightmost 4 digits)
Pulse output 1: A279 (leftmost 4 digits) and A278 (rightmost 4 digits)
Pulse output 2: A323 (leftmost 4 digits) and A322 (rightmost 4 digits)
Pulse output 3: A325 (leftmost 4 digits) and A324 (rightmost 4 digits)
The PVs are refreshed during regular I/O refreshing.
Variable-duty Pulse Outputs (PWM)
Item
Number of PWM Outputs
Specifications
Max. 4 outputs (PWM Output 00 to 03)
Duty ratio
0.0% to 100.0% in 0.1% increments
Frequency
0.1 Hz to 6,553.5 Hz (Set in 0.1-Hz increments.)
1 Hz to 32,800 Hz (Set in 1-Hz increments.)
Output mode
Continuous Mode
Instruction
PWM (891) instruction
16
CJ2M-CPU3@/-CPU1@/-MD21@
Specifications of Pulse I/O Modules
Input Specifications (IN00 to IN09/IN10 to IN19 )
Normal Inputs
IN00 to IN05 and
IN10 to IN15
Inputs
Input form
24 VDC inputs
Input current
6.0 mA typical
IN06 to IN09 and
IN16 to IN19
IN00 to IN05 and
IN10 to IN15
Line driver inputs
5.5 mA typical
Input voltage range
24 VDC +10%/−15%
Input impedance
3.6 kΩ
Number of circuits
1 common, 1 circuit
IN06 to IN09 and
IN16 to IN19
13 mA typical
10 mA typical
RS-422A or RS-422 line driver (conforming to AM26LS31),
Power supply voltage of 5 V ±5%
4.0 kΩ
---
ON voltage/current
17.4 VDC min., 3 mA min.
---
OFF voltage/current
1 mA max. at 5 VDC max.
---
ON response time
8 ms max. (The input time constant can be set to 0, 0.5, 1, 2, 4, 8, 16, or 32 ms in the PLC Setup.)
OFF response time
8 ms max. (The input time constant can be set to 0, 0.5, 1, 2, 4, 8, 16, or 32 ms in the PLC Setup.)
Input Circuit Configuration
Item
Specifications
IN00 to IN05/IN10 to IN15
24 V
24 V
LD+
LD+
Internal circuits
Circuit configuration
IN06 to IN09/IN16 to IN19
Internal circuits
Input
Interrupt Input and Quick-response Input Specifications (IN00 to IN03 and IN10 to IN13)
Item
Specifications
ON response time
30 μs max.
OFF response time
150 μs max.
30 μs min.
150 μs min.
ON
Response pulse
OFF
17
CJ2M-CPU3@/-CPU1@/-MD21@
High-speed Counter Input Specifications (IN06 to IN09 and IN16 to IN19)
24-VDC input
Phase-A/Phase-B encoder input, Single-phase
60-kHz pulse input with 50% duty ratio
Line driver input
Encoder input phase A or B, single-phase
60-kHz pulse input with 50% duty ratio
Rise time and fall time: 3.0 μs max.
16.6 μs min.
8.3 μs min.
8.3 μs min.
ON
ON
50%
50%
OFF
OFF
Set to 60 kHz
Phase-A/Phase-B encoder inputs, Differential
phases, 30 kHz
Changes in phases A and B must be
separated by at least 4.0 μs.
Phase-A/Phase-B encoder inputs, Differential
phases, 30 kHz
Changes in phases A and B must be separated by at least
4.0 μs.
33.3 μs min.
ON
ON
50%
50%
OFF
ON
OFF
ON
50%
50%
OFF
OFF
T1
T2
T3
T4
T1
T2
T3
T4
T1, T2, T3, T4: 4.0 μs min.
Phase-A/Phase-B encoder input, Single-phase
100-kHz pulse input with 50% duty ratio
Single-phase 100-kHz pulse input with
50% duty ratio
Rise time and fall time: 2.5 μs max.
ON
ON
50%
50%
OFF
OFF
2.5 μs max.
Set to 100 kHz
2.5 μs max.
Phase-A/Phase-B encoder inputs, Differential
phases, 50 kHz
Differential-phase 50-kHz pulse input
Changes in phases A and B must be separated
by at least 2.5 μs.
Changes in phases A and B must be
separated by at least 2.5 μs.
ON
ON
50%
50%
OFF
ON
OFF
ON
50%
50%
OFF
OFF
T1
T1
T2
T3
Encoder input phase Z (IN02/IN03 or IN12/IN13)
T3
T4
Encoder input phase Z (IN02/IN03 or IN12/IN13)
Maintain an ON time of 30 μs min.
and an OFF time of 150 μs min.
Maintain an ON time of 30 μs min.
and an OFF time of 150 μs min.
Phase Z/reset input
T2
T4
ON
ON
50%
50%
OFF
OFF
18
CJ2M-CPU3@/-CPU1@/-MD21@
Output Specifications (OUT00 to OUT05 and OUT10 to OUT15)
Item
Specifications
Output Specifications
Sinking-type (CJ2M-MD211)
Rated voltage
5 to 24 VDC
Allowable voltage range
4.75 to 26.4 VDC
Maximum switching
current
0.3 A/output, 1.8 A/Unit
Number of circuits
6 outputs (6 outputs/common)
3.0 A/output, 10 ms max.
Leakage current
0.1 mA max.
Residual voltage
0.6 V max.
2.0 A/output, 10 ms max.
ON response time
0.1 ms max.
OFF response time
0.1 ms max.
Fuse
None
External supply power
(power supply input for
outputs)
10.2 to 26.4 VDC, 20 mA min.
Internal circuits
Rated
voltage
circuit
Circuit configuration
COM
+V
Internal circuits
Maximum inrush current
Sourcing-type (CJ2M-MD212)
OUT
Isolation
circuit
OUT
Isolation
circuit
Rated
voltage
circuit
COM
Pulse Outputs (OUT00 to OUT03 and OUT10 to OUT13)
Item
Specifications
Output Specifications
Sinking-type (CJ2M-MD211)
Rated voltage
5 to 24 VDC
Allowable voltage range
4.75 to 26.4 VDC
Maximum switching
capacity
30 mA
Minimum switching
capacity
7 mA
Maximum output
frequency
100 kHz
OFF
Output waveform
ON
Sourcing-type (CJ2M-MD212)
ON
90%
10%
2 μs min.
OFF
4 μs min.
90%
10%
4 μs min.
2 μs min.
PWM Outputs (OUT04, OUT05, OUT14, and OUT15)
Item
Specifications
Output Specifications
Sinking-type (CJ2M-MD211)
Rated voltage
5 to 24 VDC
Sourcing-type (CJ2M-MD212)
Allowable voltage range
4.75 to 26.4 VDC
Maximum switching
capacity
6.5535 kHz or less: 300 mA, 6.5535 to 32.8 kHz: 100 mA
Maximum output
frequency
32,800 Hz
PWM output accuracy
(for ON pulse width of
2 μs or longer)
ON duty at 6.5535 kHz or less: -0.2% to +1%,
ON duty at 32.8 kHz: -1% to +5%
(at switching current of 30 mA)
ON duty at 6.5535 kHz or less: ±0.5%,
ON duty at 32.8 kHz: +2.5%
(at switching current of 30 mA)
OFF
ON
50%
50%
Output waveform
ON
t ON
T
OFF
tON
ON duty = T
X 100%
t ON
T
ON duty =
tON
T
X 100%
19
CJ2M-CPU3@/-CPU1@/-MD21@
Unit Versions
Units
Models
Unit version
CPU: Unit version 1.0 (Built-in EtherNet/IP section: Unit version 2.0)
CJ2M-CPU3@
CPU: Unit version 2.0 (Built-in EtherNet/IP section: Unit version 2.0)
CJ2M CPU Units
CPU: Unit version 1.0
CJ2M-CPU1@
CPU: Unit version 2.0
Function Support by Unit Version
Functions Supported for Unit Version 2.0 or Later
The following tables show the relationship between unit versions and CX-Programmer versions.
CPU Unit
CJ2M CPU Unit
Model
CJ2M-CPU@@
Unit Version
Function
Unit version 2.0 or higher
Unit version 1.0
OK
−
* A Pulse I/O Module must be mounted for CJ2M CPU Units with unit version 2.0 or later.
Unit Versions and Programming Devices
The following tables show the relationship between unit versions and CX-Programmer versions.
Unit Versions and Programming Devices
Required Programming Device
CPU Unit
CJ2M-CPU@@
Unit version 1.0
CJ2M-CPU@@
Unit version 2.0
Functions
CX-Programmer
Ver. 9.0 or lower
Ver. 9.1 or higher
Ver. 9.12 or higher
−
OK *1
OK
Using new functions
−
−
OK
Not using new
functions
−
OK *2
OK
Functions for unit version 1.0
Functions
added for unit
version 2.0
Programming
Console
− *3
*1. CX-Programmer version 9.1 or higher is required to use CJ2M CPU Units.
*2. It is not necessary to upgrade the version of the CX-Programmer if functionality that was enhanced for the upgrade of the CPU Unit will not be
used.
*3. A Programming Console cannot be used with a CJ2M CPU Unit.
Device Type Setting
The unit version does not affect the setting made for the device type on the CX-Programmer. Select the device type as shown in the following table
regardless of the unit version of the CPU Unit.
Series
CJ Series
CPU Unit group
CJ2M CPU Units
Device type setting on
CX-Programmer Ver. 9.1 or higher
CPU Unit model
CJ2M-CPU3@
CJ2M-CPU1@
CJ2M
20
CJ2M-CPU3@/-CPU1@/-MD21@
External Interface
CJ2M-CPU3@ (CJ2M with Built-in EtherNet/IP)
A CJ2M-CPU3@ provides two communications ports for external interfaces: a peripheral (USB) port and an EtherNet/IP port.
The Pulse I/O functions of the CJ2M can be used by mounting a Pulse I/O Module. Up to two Pulse I/O Modules can be connected to the left side
of a CJ2M CPU Unit.
Serial ports can be added by mounting a Serial Communications Option Board (sold separately) in an option slot.
Battery Compartment
LED Indicators
DIP Switch
(inside the battery compartment)
Memory Card Indicators
Simple Backup/Memory Card
Power Supply Switch
Peripheral (USB) Port
Connect to PC with CX-Programmer
Memory Card Connector
EtherNet/IP Port
Connected to the information management
system such as Host Computer
Attachable
Memory Card Eject Button
Option board slot
Add a serial option board (option)
Pulse I/O Module (2 units max.)
CJ2M-MD21@
COMM
CP1W-CIF01
RS-232C
Option Board
COMM
CP1W-CIF11/CIF12
RS-422A/485
Option Board
CJ2M-CPU1@
A CJ2M-CPU1@ provides two communications ports for external interfaces: a peripheral (USB) port and a serial port.
The Pulse I/O of the CJ2M can be used by mounting a Pulse I/O Module. Up to two Pulse I/O Modules can be connected to the left side of a CJ2M
CPU Unit.
LED Indicator
Battery Compartment
DIP Switch
(inside the battery compartment)
Memory Card Indicators
Attachable
Simple Backup/Memory Card
Power Supply Switch
Peripheral (USB) Port
Connect to PC with CX-Programmer
Memory Card Connector
Built-in Serial Port
Connect to Host Computers,
general-purpose external device,
Programmable Terminals, and other devices.
Memory Card Eject Button
Pulse I/O Module (2 units max.)
CJ2M-MD21@
21
CJ2M-CPU3@/-CPU1@/-MD21@
Peripheral (USB) Port
Item
Specification
Baud Rate
12 Mbps max.
Transmission Distance
5 m max.
Interface
USB 2.0-compliant B-type connector
Protocol
Peripheral Bus
EtherNet/IP Port
Item
Specification
Media Access Method
CSMA/CD
Modulation
Baseband
Transmission Paths
Star
Baud Rate
100 Mbps (100Base-TX)
Transmission Media
Shielded twisted-pair (STP) cable; Categories: 5, 5e
Transmission Distance
100 m (between ethernet switch and node)
Number of Cascade Connections
No restrictions if ethernet switch is used.
Communications
CIP Communications (tag data links, Explicit Messages).
FINS communications
Built-in Serial Port (Only CJ2M-CPU1@)
Item
Specification
Communications method
Half duplex
Synchronization
Start-stop
Baud rate
0.3/0.6/1.2/2.4/4.8/9.6/19.2/38.4/57.6/115.2 kbps *
Transmission distance
15 m max.
Interface
EIA RS-232C
Protocol
Host Link, NT Link, 1:N, No-protocol, or Peripheral Bus
* Baud rates for the RS-232C are specified only up to 19.2 kbps. The CJ Series supports serial communications from 38.4 kbps to 115.2 kbps,
but some computers cannot support these speeds. Lower the baud rate if necessary.
Pin No.
1
1
6
9
5
Signal
FG
Name
Protection earth
Direction
−
2
SD (TXD)
Send data
Output
3
RD (RXD)
Receive data
Input
4
RS (RTS)
Request to send
Output
5
CS (CTS)
Clear to send
Input
6
5V
Power supply
−
7
DR (DSR)
Data set ready
Input
8
ER (DTR)
Data terminal ready
Output
9
SG (0 V)
Signal ground
−
Connector hood
FG
Protection earth
−
Note: Do not use the 5-V power from pin 6 of the RS-232C port for anything but CJ1W-CIF11 RS-422A Conversion Adapter, NT-AL001 RS-232C/
RS-422A Conversion Adapter and NV3W-M_20L Programmable Terminal. The external device or the CPU Unit may be damaged.
22
CJ2M-CPU3@/-CPU1@/-MD21@
Serial Option Board (Only CJ2M-CPU3@)
A Serial Option Board can be used with a CJ2M-CPU3@ CJ2M CPU Unit.
Model
Port
Maximum transmission distance
Connection method
CP1W-CIF01
One RS-232C port
15 m
Connector: D-sub, 9-pin female
CP1W-CIF11
One RS-422A/485 port (not
isolated)
50 m
Terminal block: Using ferrules
CP1W-CIF12
One RS-422A/485 port (isolated)
500 m
Terminal block: Using ferrules
CP1W-CIF01 RS-232C Option Board
Front
Back
Communications Status Indicator
CPU Unit Connector
COMM
RS-232 Connector
●RS-232C Connector
Pin No.
1
5
1
6
9
Signal
FG
Name
Direction
Protection earth
−
2
SD (TXD)
Send data
Output
3
RD (RXD)
Receive data
Input
4
RS (RTS)
Request to send
Output
5
CS (CTS)
Clear to send
Input
6
5V
Power supply
−
7
DR (DSR)
Data set ready
Input
8
ER (DTR)
Data terminal ready
Output
9
SG (0 V)
Signal ground
−
Connector hood
FG
Protection earth
−
Note: Do not use the 5-V power from pin 6 of the RS-232C port for anything but CJ1W-CIF11 RS-422A Conversion Adapter, NT-AL001 RS-232C/
RS-422A Conversion Adapter and NV3W-M_20L Programmable Terminal. The external device or the CPU Unit may be damaged.
CP1W-CIF11/CIF12 RS-422A/485 Option Board
Front
Back
Communications Status Indicator
CPU Unit
Connector
COMM
RDA- RDB+ SDA- SDB+ FG
DIP Switch for
Operation Settings
RS-422A/485 Connector
●RS-422A/485 Terminal Block
Tighten the terminal block screws
to a torque of 0.28 N·m.
FG
RDARDB+
SDA-
SDB+
23
CJ2M-CPU3@/-CPU1@/-MD21@
Connector Pin Allocations of Pulse I/O Module (40 pins)
Connector on Sinking-type I/O Module (CJ2M-MD211)
Pin layout
Terminal symbol
Input signal type
24 VDC
IN00/IN10
IN02/IN12
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
IN04/IN14
IN06/IN16
IN08/IN18
*
Pin
1
A1
LD+
3
A2
0 V/LD−
5
A3
24 VDC
7
A4
LD+
9
A5
0 V/LD−
11
24 VDC
Terminal symbol
Input signal type
*
Pin
24 VDC
2
B1
LD+
4
B2
0 V/LD−
6
B3
24 VDC
8
B4
LD+
10
B5
A6
0 V/LD−
12
B6
13
A7
24 VDC
14
B7
LD+
15
A8
LD+
16
B8
0 V/LD−
17
A9
0 V/LD−
18
B9
24 VDC
19
A10
24 VDC
20
B10
LD+
21
A11
LD+
22
B11
0 V/LD−
23
A12
0 V/LD−
24
B12
24 VDC
25
A13
24 VDC
26
B13
LD+
27
A14
LD+
28
B14
0 V/LD−
29
A15
0 V/LD−
30
B15
IN01/IN11
IN03/IN13
IN05/IN15
IN07/IN17
IN09/IN19
OUT00/OUT10
---
31
A16
OUT01/OUT11
---
32
B16
OUT02/OUT12
---
33
A17
OUT03/OUT13
---
34
B17
OUT04/OUT14
---
35
A18
OUT05/OUT15
---
36
B18
---
38
B19
---
40
B20
Power supply input +V for
outputs
---
37
A19
Power supply input +V for
outputs
COM
---
39
A20
COM
* Terminals numbers on the XW2D-@@G@ Connector-Terminal Block Conversion Unit.
Sourcing-type I/O Module (CJ2M-MD212)
Pin layout
Terminal symbol
Input signal type
24 VDC
IN00/IN10
IN02/IN12
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
IN04/IN14
IN06/IN16
IN08/IN18
*
Pin
1
A1
LD+
3
A2
0 V/LD−
5
A3
24 VDC
7
A4
LD+
9
A5
0 V/LD−
11
24 VDC
Terminal symbol
Input signal type
*
Pin
24 VDC
2
B1
LD+
4
B2
0 V/LD−
6
B3
24 VDC
8
B4
LD+
10
B5
A6
0 V/LD−
12
B6
13
A7
24 VDC
14
B7
LD+
15
A8
LD+
16
B8
0 V/LD−
17
A9
0 V/LD−
18
B9
24 VDC
19
A10
24 VDC
20
B10
LD+
21
A11
LD+
22
B11
0 V/LD−
23
A12
0 V/LD−
24
B12
24 VDC
25
A13
24 VDC
26
B13
LD+
27
A14
LD+
28
B14
0 V/LD−
29
A15
0 V/LD−
30
B15
IN01/IN11
IN03/IN13
IN05/IN15
IN07/IN17
IN09/IN19
OUT00/OUT10
---
31
A16
OUT01/OUT11
---
32
B16
OUT02/OUT12
---
33
A17
OUT03/OUT13
---
34
B17
OUT04/OUT14
---
35
A18
OUT05/OUT15
---
36
B18
COM
---
37
A19
COM
---
38
B19
Power supply input −V for
outputs
---
39
A20
Power supply input −V
for outputs
---
40
B20
* Terminals numbers on the XW2D-@@G@ Connector-Terminal Block Conversion Unit.
24
CJ2M-CPU3@/-CPU1@/-MD21@
Pulse I/O Module MIL connector Wiring Methods
To connect to a Terminal Block, use an OMRON Cable preassembled with the special connector or attach the special connector (sold separately)
to a cable yourself.
Using User-made Cables with Connector
Connector Models
Compatible Connector Specifications
• MIL Flat Cable Connectors (40-pin Pressure-fitted Connectors)
Socket
Stain relief
Name
OMRON model number
Socket
XG4M-4030
Stain Relief
XG4M-4004
Set model number
XG4M-4030-T
Recommended Flat Cable
XY3A-200@
• MIL Loose Wire Crimp Connectors (40-pin Pressure-fitted Connectors)
Hood Cover
Partial Cover
Socket
Name
Socket
Spare Contacts
(See note 1.)
OMRON model number
AWG24
XG5M-4032-N
AWG26 to AWG28
XG5M-4035-N
AWG24
XG5W-0031-N
AWG26 to AWG28
XG5W-0034-N
Hood Cover (See note 2.)
XG5S-4022
Partial Cover (See note 2.)
(2 required for each socket)
XG5S-2001
Note: 1. Contacts are included with the Socket.
2. Select either the Hood Cover or the Partial Cover.
Wiring
We recommend using a cable with wires sized between 28 and 24 AWG (0.2 to 0.08 mm2). Use a wire with an outer diameter of 1.61 mm max.
Compatible Terminal Blocks
Recommended Cable
Compatible Terminal Block
Number of pins
XW2D-40G6
XW2Z-@@@K
XW2B-40G5
XW2B-40G4
Size
Temperature (°C)
Small
40
Standard
0 to 55
25
CJ2M-CPU3@/-CPU1@/-MD21@
Using preassembled cables and terminal blocks.
Connection of Pulse I/O module to a General-purpose Terminal Block
Pulse I/O Module
CJ2M CPU Unit
Special Connecting Cable
XW2Z-@@@K
Connector-Terminal Block
Conversion Unit
XW2@-40G@
Terminal Block
Connection of Pulse I/O module to a Servo Drive Terminal Block
Pulse I/O Module
CJ2M CPU Unit
Connecting Cables for Pulse I/O Module
• For OMNUC G5/G Series: XW2Z-@@@J-A33
• For SMARTSTEP2: XW2Z-@@@J-A33
Servo Relay Unit for 1 axis
XW2B-20J6-8A
Servo Drive Connecting Cables
• For OMNUC G5/G Series: XW2Z-@@@J-B31
• For SMARTSTEP2: XW2Z-@@@J-B32
Servo Driver
• OMNUC G5/G Series: R88D-GT
• SMARTSTEP2: R7D-BP
26
CJ2M-CPU3@/-CPU1@/-MD21@
Dimensions
(Unit: mm)
CJ2M-CPU3@
76.2
2.7
90
2.7
62
75
84.5
CJ2M-CPU1@
76.2
2.7
90
2.7
31
75
84.5
CJ2M-MD211/MD212
20
2.7
66.2
90
2.7
65
83.8
27
CJ2M-CPU3@/-CPU1@/-MD21@
Related Manuals
Cat. No.
W472
W473
Model
CJ2H-CPU6@-EIP
CJ2H-CPU6@
CJ2M-CPU@@
CJ2H-CPU6@-EIP
CJ2H-CPU6@
CJ2M-CPU@@
Manual
CJ-series CJ2 CPU Unit
Hardware User’s
Manual
CJ-series CJ2 CPU Unit
Software User’s Manual
Application
Description
Hardware specifications for CJ2
CPU Units
Describes the following for CJ2 CPU Units:
• Overview and features
• Basic system configuration
• Part nomenclature and functions
• Mounting and setting procedure
• Remedies for errors
• Also refer to the Software User’s Manual (W473).
Software specifications for CJ2
CPU Units
Describes the following for CJ2 CPU Units:
• CPU Unit operation
• Internal memory
• Programming
• Settings
• Functions built into the CPU Unit
Also refer to the Hardware User’s Manual (W472)
W486
CJ2M-CPU@@
+
CJ2M-MD21@
CJ-series CJ2M CPU
Unit Pulse I/O Module
User's Manual
Information on using Pulse I/O
on CJ2M CPU Units
Provides the following information on the CJ2M CPU Units:
• Specifications and wiring methods
• I/O functions
• Quick-response inputs
• Interrupt functions
• High-speed counters
• Pulse outputs
• PWM outputs
When programming, use this manual together with the
Instructions Reference Manual (Cat. No. W474).
W474
CJ2H-CPU6@-EIP
CJ2H-CPU6@
CJ2M-CPU3@
CJ2M-CPU1@
CS1G/H-CPU@@H
CS1G/H-CPU@@-V1
CJ1G/H-CPU@@H
CJ1G-CPU@@
CJ1M-CPU@@
NSJ@-@@@@(@)-@@@
CS/CJ/NSJ-series
Instructions Reference
Manual
Information on instructions
Describes each programming instruction in detail.
Also refer to the Software User’s Manual (W473) when you
do programming.
W342
CJ2H-CPU6@-EIP
CJ2H-CPU6@
CJ2M-CPU@@
CS1G/H-CPU@@H
CS1G/H-CPU@@-V1
CS1D-CPU@@H
CS1D-CPU@@S
CS1W-SCU@@-V1
CS1W-SCB@@-V1
CJ1H-CPU@@H-R
CJ1G/H-CPU@@H
CJ1G-CPU@@P
CJ1M-CPU@@
CJ1G-CPU@@
CJ1W-SCU@@-V1
CP1H-X@@@@-@
CP1H-XA@@@@-@
CP1H-Y@@@@-@
CP1E-E/N@@D@-@
NSJ@-@@@@(@)-@@@
CS/CJ/CP/NSJ-series
Communications
Command Reference
Manual
Information on communications
for CS/CJ/CP-series CPU Units
and NSJ-series Controllers
Describes C-mode commands and FINS commands
Refer to this manual for a detailed description of commands
for communications with the CPU Unit using C mode
commands or FINS commands.
Note: This manual describes the communications
commands that are addressed to CPU Units. The
communications path that is used is not relevant and
can include any of the following: serial ports on CPU
Units, communications ports on Serial
Communications Units/Boards, and Communications
Units. For communications commands addressed to
Special I/O Units or CPU Bus Units, refer to the
operation manual for the related Unit.
W465
CJ2H-CPU6@-EIP
CJ2M-CPU3@
CS1W-EIP21
CJ1W-EIP21
CS and CJ Series
EtherNet/IP Units
CS1W-EIP21, CJ1WEIP21, CJ2H-CPU6@EIP, CJ2M-CPU3@
Operation Manual
Information for EtherNet/IP
function of CJ2M built-in
Ethernet port
Describes EtherNet/IP port/units. A basic setting, a tag data
link, FINS communication, and other function are described.
W463
CXONE-AL@@C-V@/
AL@@D-V@
CX-One Setup Manual
Installing software from the CX- Provides an overview of the CX-One FA Integrated Tool
One
Package and describes the installation procedure.
W446
CX-Programmer
Operation Manual
W447
CX-Programmer
Operation Manual
Functions Blocks/
Structured Text
WS02-CXPC@-V@
CX-Programmer
Operation Manual SFC
Programming
W469
W366
WS02-SIMC1-E
CS/CJ/CP/NSJ-series
CX-Simulator Operation
Manual
W464
CXONE-AL@@C-V@/
CXONE-AL@@D-V@
CS/CJ/CP/NSJ-series
CX-Integrator Network
Configuration Software
Operation Manual
Support Software for Windows
computers
CX-Programmer operating
procedure
Describes operating procedures for the CX-Programmer.
Also refer to the Software User’s Manual (W473) and
Instructions Reference Manual (W474) when you do
programming.
Operating procedures for CXSimulator Simulation Support
Software for Windows
computers
Using simulation in the CXProgrammer with CXProgrammer version 6.1 or
higher
Describes the operating procedures for the CX-Simulator.
When you do simulation, also refer to the CX-Programmer
Operation Manual (W446), Software User’s Manual (W473),
and CS/CJ/NSJ series Instructions Reference Manual
(W474).
Network setup and monitoring
Describes the operating procedures for the CX-Integrator.
28
Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed
part of all quotes, agreements, purchase orders, acknowledgments, price lists,
catalogs, manuals, brochures and other documents, whether electronic or in
writing, relating to the sale of products or services (collectively, the "Products")
by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron
objects to any terms or conditions proposed in Buyer’s purchase order or other
documents which are inconsistent with, or in addition to, these Terms.
2. Prices; Payment Terms. All prices stated are current, subject to change without notice by Omron. Omron reserves the right to increase or decrease prices
on any unshipped portions of outstanding orders. Payments for Products are
due net 30 days unless otherwise stated in the invoice.
3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices
sent to Buyer after deducting transportation charges, taxes and duties, and will
be allowed only if (i) the invoice is paid according to Omron’s payment terms
and (ii) Buyer has no past due amounts.
4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or
the maximum legal rate, whichever is less, on any balance not paid within the
stated terms.
5. Orders. Omron will accept no order less than $200 net billing.
6. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the importation or sale of the Products.
7. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon,
imposed directly or indirectly on Omron or required to be collected directly or
indirectly by Omron for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs
duties and sales, excise, use, turnover and license taxes) shall be charged to
and remitted by Buyer to Omron.
8. Financial. If the financial position of Buyer at any time becomes unsatisfactory
to Omron, Omron reserves the right to stop shipments or require satisfactory
security or payment in advance. If Buyer fails to make payment or otherwise
comply with these Terms or any related agreement, Omron may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all
amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all
unpaid accounts.
9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Omron against all related costs or expenses.
10. Force Majeure. Omron shall not be liable for any delay or failure in delivery
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron:
a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship
except in “break down” situations.
b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall
constitute delivery to Buyer;
c. All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Omron), at which point title and risk of loss shall
pass from Omron to Buyer; provided that Omron shall retain a security interest in the Products until the full purchase price is paid;
d. Delivery and shipping dates are estimates only; and
e. Omron will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions.
12. Claims. Any claim by Buyer against Omron for shortage or damage to the
Products occurring before delivery to the carrier must be presented in writing
to Omron within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Products
from Omron in the condition claimed.
13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the
Products will be free from defects in materials and workmanship for a period of
twelve months from the date of sale by Omron (or such other period expressed
in writing by Omron). Omron disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
14.
15.
16.
17.
18.
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. Omron further disclaims all warranties and responsibility of
any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form
originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying
Product, or (iii) repay or credit Buyer an amount equal to the purchase price of
the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding
the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by
Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the
use of Products in combination with any electrical or electronic components,
circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing,
are not to be construed as an amendment or addition to the above warranty.
See http://www.omron247.com or contact your Omron representative for published information.
Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE
FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY
WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS
BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual
price of the Product on which liability is asserted.
Indemnities. Buyer shall indemnify and hold harmless Omron Companies and
their employees from and against all liabilities, losses, claims, costs and
expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Omron is a party) which arises
or is alleged to arise from Buyer's acts or omissions under these Terms or in
any way with respect to the Products. Without limiting the foregoing, Buyer (at
its own expense) shall indemnify and hold harmless Omron and defend or settle any action brought against such Companies to the extent based on a claim
that any Product made to Buyer specifications infringed intellectual property
rights of another party.
Property; Confidentiality. Any intellectual property in the Products is the exclusive property of Omron Companies and Buyer shall not attempt to duplicate it
in any way without the written permission of Omron. Notwithstanding any
charges to Buyer for engineering or tooling, all engineering and tooling shall
remain the exclusive property of Omron. All information and materials supplied
by Omron to Buyer relating to the Products are confidential and proprietary,
and Buyer shall limit distribution thereof to its trusted employees and strictly
prevent disclosure to any third party.
Export Controls. Buyer shall comply with all applicable laws, regulations and
licenses regarding (i) export of products or information; (iii) sale of products to
“forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of
regulated technology or information.
Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right
and no course of dealing between Buyer and Omron shall operate as a waiver
of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder
without Omron's written consent. (c) Law. These Terms are governed by the
law of the jurisdiction of the home office of the Omron company from which
Buyer is purchasing the Products (without regard to conflict of law principles). (d) Amendment. These Terms constitute the entire agreement between
Buyer and Omron relating to the Products, and no provision may be changed
or waived unless in writing signed by the parties. (e) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate
any other provision. (f) Setoff. Buyer shall have no right to set off any amounts
against the amount owing in respect of this invoice. (g) Definitions. As used
herein, “including” means “including without limitation”; and “Omron Companies” (or similar words) mean Omron Corporation and any direct or indirect
subsidiary or affiliate thereof.
Certain Precautions on Specifications and Use
1. Suitability of Use. Omron Companies shall not be responsible for conformity
with any standards, codes or regulations which apply to the combination of the
Product in the Buyer’s application or use of the Product. At Buyer’s request,
Omron will provide applicable third party certification documents identifying
ratings and limitations of use which apply to the Product. This information by
itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application
or use. Buyer shall be solely responsible for determining appropriateness of
the particular Product with respect to Buyer’s application, product or system.
Buyer shall take application responsibility in all cases but the following is a
non-exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Use in consumer products or any use in significant quantities.
(iii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations.
(iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT
ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO
2.
3.
4.
5.
ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products. Omron Companies shall not be responsible for the
user’s programming of a programmable Product, or any consequence thereof.
Performance Data. Data presented in Omron Company websites, catalogs
and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s
test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations
of Liability.
Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Omron’s representative at any time
to confirm actual specifications of purchased Product.
Errors and Omissions. Information presented by Omron Companies has been
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors or omissions.
OMRON ELECTRONICS LLC • THE AMERICAS HEADQUARTERS • Schaumburg, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com
OMRON CANADA, INC. • HEAD OFFICE
Toronto, ON, Canada • 416.286.6465 • 866.986.6766
www.omron247.com
OMRON ARGENTINA • SALES OFFICE
Cono Sur • 54.11.4783.5300
OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE
São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br
OMRON CHILE • SALES OFFICE
Santiago • 56.9.9917.3920
OMRON ELECTRONICS MEXICO SA DE CV • HEAD OFFICE
Apodaca, N.L. • 52.811.156.99.10 • 001.800.556.6766 • [email protected]
OTHER OMRON LATIN AMERICA SALES
54.11.4783.5300
Omron Europe B.V. Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. Tel: +31 (0) 23 568 13 00 Fax: +31 (0) 23 568 13 88 www.industrial.omron.eu
CSM_CJ2M_CPU_DS1
07/10
Note: Specifications are subject to change.
© 2010 Omron Electronics LLC