Download Oxygen Sensor OOM102.pdf

Product Specification
Oxygen Sensor OOM102 / OOM102-1
Measurement Range:
Output in ambient air:
Electrical Interface:
Accuracy and Repeatability:
Linearity error:
Response time:
Zero Offset Voltage:
Cross Interference:
Influence of Humidity:
Influence of Pressure:
Influence of Mechanical Shock:
Operating Temperature:
Temperature Compensation:
Effect of Temperature
Compensation (steady state):
Operating Humidity:
Long Term Output Drift:
Storage Temperature:
Recommended Storage:
Recommended Load:
Warm-Up Time:
Nominal Sensor Lifetime:
Weight:
Warranty Period:
Part No.:
0-100 % oxygen
9 to 14mV
OOM102: 3pin (Molex 22-11-1031)
OOM102-1: 3,5mm Mono Jack
< 1 % vol. O2 when calibrated at 100 %
Oxygen
< 3 % relative
< 12sec. to 90 % of final value
< 200 µV in 100 % nitrogen
applied after 5 min
< 0.5 % vol. O2 response to:
10 % CO2 balance N2
80% N2O balance N2
7.5% Halothane balance N2
7.5 % Isoflurane balance N2
7.5 % Enflurane balance N2
9% Sevoflurane balance N2
20% Desflurane balance N2
- 0.03 % rel. per % RH at 25°C
proportional to change in oxygen partial
pressure
< 1% relative after a fall from 1m
0 to 50°C
built-in NTC compensation
between +25°C and +40°C: 3 % relative error
between 0 °C and +50 °C: 8 % relative error
0-99 % RH non-condensing
< 1 % vol oxygen per month
typically < - 15 % relative over lifetime
-20 to +50 °C
+5 to +15 °C
≥ 10 kOhms
< 30 minutes, after replacement of sensor
≥ 1.000.000 % vol oxygen hours
approximately 28 grams
15 months
01-00-0019 / OOM102
01-00-0020 / OOM102-1
Use the advantages:
•
•
Meet EN ISO 21647
Designed and
manufactured according to
EN ISO 9001 : 2000 and EN
ISO 13485 : 2003
•
•
•
•
Accurate and reliable
response
Resistant to N2O
Excellent signal stability
High product quality
•
•
Short lead times
Technical support
All specifications are applicable at standard conditions: 1013 hPa, 25°C dry ambient air
O O M 102
O O M 1 0 2 -1
ENVITEC- WISMAR GMBH
TEL:13361073697(China)
Alter Holzhafen 18
D-23966 Wismar
Phone: +49-(0) 3841- 360 1
Fax: +49-(0) 3841- 360 222
E-Mail: [email protected]
http://www.envitec.com
Dimension in mm
Document No.:001-05-00000243-B.DOC, 06/2006
Similar pages