VISHAY BZW04P48

BZW04P-5V8 thru BZW04-376
www.vishay.com
Vishay General Semiconductor
TransZorb® Transient Voltage Suppressors
FEATURES
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• 400 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate
(duty cycle): 0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
DO-204AL (DO-41)
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• AEC-Q101 qualified
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
TYPICAL APPLICATIONS
PRIMARY CHARACTERISTICS
VWM
5.8 V to 376 V
PPPM
400 W
PD
1.5 W
IFSM (uni-directional only)
40 A
TJ max.
175 °C
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial and telecommunication.
MECHANICAL DATA
Case: DO-204AL, molded epoxy over passivated chip
DEVICES FOR BI-DIRECTION APPLICATIONS
For
bi-directional
BZW04P-6V4B).
types,
use
B
suffix
(e.g.
Electrical characteristics apply in both directions.
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Note
BZW04-213(B) ~ BZW04-376(B) for commercial grade only
Polarity: For uni-directional types the color band denotes
cathode end, no marking on bi-directional types
MAXIMUM RATINGS AND THERMAL CHARACTERISTICS (TA = 25 °C unles otherwise noted)
PARAMETER
Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 1)
Peak pulse current with a 10/1000 μs
waveform (1)
Power dissipation on infinite heatsink at TL = 75 °C (fig. 5)
Peak forward surge current, 8.3 ms single half sine-wave uni-directional only (2)
Maximum instantaneous forward voltage at 25 A for uni-directional only (3)
Operating junction and storage temperature range
SYMBOL
LIMIT
UNIT
PPPM
400
W
IPPM
See next
table
A
PD
1.5
W
IFSM
40
A
VF
3.5/5.0
V
TJ, TSTG
- 55 to + 175
°C
Notes
(1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2
A
(2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
(3) V = 3.5 V for BZW04P(-)188 and below; V = 5.0 V for BZW04P(-)213 and above
F
F
Revision: 12-Jul-11
Document Number: 88316
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BZW04P-5V8 thru BZW04-376
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PART NUMBER
UNI-DIRECTIONAL
BZW04P5V8
BZW04-5V8
BZW04P6V4
BZW04-6V4
BZW04P7V0
BZW04-7V0
BZW04P7V8
BZW04-7V8
BZW04P8V5
BZW04-8V5
BZW04P9V4
BZW04-9V4
BZW04P10
BZW04-10
BZW04P11
BZW04-11
BZW04P13
BZW04-13
BZW04P14
BZW04-14
BZW04P15
BZW04-15
BZW04P17
BZW04-17
BZW04P19
BZW04-19
BZW04P20
BZW04-20
BZW04P23
BZW04-23
BZW04P26
BZW04-26
BZW04P28
BZW04-28
BZW04P31
BZW04-31
BZW04P33
BZW04-33
BZW04P37
BZW04-37
BZW04P40
BZW04-40
BZW04P44
BZW04-44
BZW04P48
BZW04-48
BZW04P53
BZW04-53
BZW04P58
BZW04-58
BZW04P64
BZW04-64
Revision: 12-Jul-11
BI-DIRECTIONAL
BZW04P5V8B
BZW04-5V8B
BZW04P6V4B
BZW04-6V4B
BZW04P7V0B
BZW04-7V0B
BZW04P7V8B
BZW04-7V8B
BZW04P8V5B
BZW04-8V5B
BZW04P9V4B
BZW04-9V4B
BZW04P10B
BZW04-10B
BZW04P11B
BZW04-11B
BZW04P13B
BZW04-13B
BZW04P14B
BZW04-14B
BZW04P15B
BZW04-15B
BZW04P17B
BZW04-17B
BZW04P19B
BZW04-19B
BZW04P20B
BZW04-20B
BZW04P23B
BZW04-23B
BZW04P26B
BZW04-26B
BZW04P28B
BZW04-28B
BZW04P31B
BZW04-31B
BZW04P33B
BZW04-33B
BZW04P37B
BZW04-37B
BZW04P40B
BZW04-40B
BZW04P44B
BZW04-44B
BZW04P48B
BZW04-48B
BZW04P53B
BZW04-53B
BZW04P58B
BZW04-58B
BZW04P64B
BZW04P64B
BREAKDOWN
VOLTAGE
VBR AT IT (1)
(V)
MIN.
6.45
6.45
7.13
7.13
7.79
7.79
8.65
8.65
9.50
9.50
10.5
10.5
11.4
11.4
12.4
12.4
14.3
14.3
15.2
15.2
17.1
17.1
19.0
19.0
20.9
20.9
22.8
22.8
25.7
25.7
28.5
28.5
31.4
31.4
34.2
34.2
37.1
37.1
40.9
40.9
44.7
44.7
48.5
48.5
53.2
53.2
58.9
58.9
64.6
64.6
71.3
71.3
MAX.
7.48
7.14
8.25
7.88
9.02
8.61
10.0
9.55
11.0
10.5
12.1
11.6
13.2
12.6
14.3
13.7
16.5
15.8
17.6
16.8
19.8
18.9
22.0
21.0
24.2
23.1
26.4
25.2
29.7
28.4
33.0
31.5
36.3
34.7
39.6
37.8
42.9
41.0
47.3
45.2
51.7
49.4
56.1
53.6
61.6
58.8
68.2
65.1
74.8
71.4
82.5
78.8
STANDTEST
OFF
CURRENT
VOLTAGE
IT (mA)
VWM (V)
10.0
10.0
10.0
10.0
10.0
10.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
5.80
5.80
6.40
6.40
7.02
7.02
7.78
7.78
8.55
8.55
9.4
9.4
10.2
10.2
11.1
11.1
12.8
12.8
13.6
13.6
15.3
15.3
17.1
17.1
18.8
18.8
20.5
20.5
23.1
23.1
25.6
25.6
28.2
28.2
30.8
30.8
33.3
33.3
36.8
36.8
40.2
40.2
43.6
43.6
47.8
47.8
53.0
53.0
58.1
58.1
64.1
64.1
MAXIMUM MAXIMUM MAXIMUM
REVERSE
PEAK
CLAMPING
LEAKAGE
PULSE
VOLTAGE
AT VWM
CURRENT
AT IPPM
IPPM (2) (A)
ID (4) ( A)
VC (V)
1000
1000
500
500
200
200
50
50
10
10
5.0
5.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
38.0
38.0
35.4
35.4
33.0
33.0
30.0
30.0
27.6
27.6
25.7
25.7
24.0
24.0
22.0
22.0
19.0
19.0
17.8
17.8
16.0
16.0
14.5
14.5
13.0
13.0
12.0
12.0
10.7
10.7
9.6
9.6
8.8
8.8
8.0
8.0
7.4
7.4
6.7
6.7
6.2
6.2
5.7
5.7
5.2
5.2
4.7
4.7
4.3
4.3
3.9
3.9
10.5
10.5
11.3
11.3
12.1
12.1
13.4
13.4
14.5
14.5
15.6
15.6
16.7
16.7
18.2
18.2
21.2
21.2
22.5
22.5
25.2
25.2
27.7
27.7
30.6
30.6
33.2
33.2
37.5
37.5
41.5
41.5
45.7
45.7
49.9
49.9
53.9
53.9
59.3
59.3
64.8
64.8
70.1
70.1
77.0
77.0
85.0
85.0
92.0
92.0
103
103
MAXIMUM
TEMPERATURE
COEFFICIENT
OF
VBR (%/°C)
0.057
0.057
0.061
0.061
0.065
0.065
0.068
0.073
0.07
0.075
0.075
0.075
0.078
0.078
0.081
0.081
0.084
0.084
0.086
0.086
0.088
0.088
0.090
0.090
0.092
0.092
0.094
0.094
0.096
0.096
0.097
0.097
0.098
0.098
0.099
0.099
0.100
0.100
0.101
0.101
0.101
0.101
0.102
0.102
0.103
0.103
0.104
0.104
0.104
0.104
0.105
0.105
Document Number: 88316
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BZW04P-5V8 thru BZW04-376
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
BREAKDOWN
VOLTAGE
VBR AT IT (1)
(V)
PART NUMBER
UNI-DIRECTIONAL
BZW04P70
BZW04-70
BZW04P78
BZW04-78
BZW04P85
BZW04-85
BZW04P94
BZW04-94
BZW04P102
BZW04-102
BZW04P110
BZW04-110
BZW04P128
BZW04-128
BZW04P136
BZW404-136
BZW04P145
BZW04-145
BZW04P154
BZW04-154
BZW04P171
BZW04-171
BZW04P188
BZW04-188
BZW04P213
BZW04-213
BZW04P239
BZW04-239
BZW04P256
BZW04-256
BZW04P273
BZW04-273
BZW04P299
BZW04-299
BZW04P342
BZW04-342
BZW04P376
BZW04-376
BI-DIRECTIONAL
BZW04P70B
BZW04-70B
BZW04P78B
BZW04-78B
BZW04P85B
BZW04-85B
BZW04P94B
BZW04-94B
BZW04P102B
BZW04-102B
BZW04P110B
BZW04-110B
BZW04P128B
BZW04-128B
BZW04P136B
BZW404-136B
BZW04P145B
BZW04-145B
BZW04P154B
BZW04-154B
BZW04P171B
BZW04-171B
BZW04P188B
BZW04-188B
BZW04P213B
BZW04-213B
BZW04P239B
BZW04-239B
BZW04P256B
BZW04-256B
BZW04P273B
BZW04-273B
BZW04P299B
BZW04-299B
BZW04P342B
BZW04-342B
BZW04P376B
BZW04-376B
MIN.
77.9
77.9
86.5
86.5
95.0
95.0
105
105
114
114
124
124
143
143
152
152
161
161
171
171
190
190
209
209
237
237
266
266
285
285
304
304
332
332
380
380
418
418
MAX.
90.2
86.1
100
95.5
110
105
121
116
132
126
143
137
165
158
176
168
187
179
198
189
220
210
242
231
275
263
308
294
330
315
352
336
385
368
440
420
484
462
STANDTEST
OFF
CURRENT
VOLTAGE
IT (mA)
VWM (V)
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
70.1
70.1
78.0
78.0
85.5
85.5
94.0
94.0
102
102
111
111
128
128
136
136
145
145
154
154
171
171
188
188
213
213
239
239
256
256
273
273
299
299
342
342
376
376
MAXIMUM MAXIMUM MAXIMUM
REVERSE
PEAK
CLAMPING
LEAKAGE
PULSE
VOLTAGE
AT VWM
CURRENT
AT IPPM
IPPM (2) (A)
ID (4) ( A)
VC (V)
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
3.5
3.5
3.2
3.2
2.9
2.9
2.6
2.6
2.4
2.4
2.2
2.2
2.0
2.0
1.8
1.8
1.7
1.7
1.6
1.6
1.5
1.5
1.4
1.4
1.2
1.2
1.1
1.1
1.0
1.0
0.90
0.90
0.80
0.80
0.75
0.75
0.67
0.67
113
113
125
125
137
137
152
152
165
165
179
179
207
207
219
219
234
234
246
246
274
274
301
301
344
344
384
384
414
414
438
438
482
482
548
548
603
603
MAXIMUM
TEMPERATURE
COEFFICIENT
OF
VBR (%/°C)
0.105
0.105
0.105
0.105
0.106
0.106
0.107
0.107
0.107
0.107
0.107
0.107
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
Notes
(1) Pulse test: t  50 ms
p
(2) Surge current waveform per fig. 3 and derated per fig. 2
(3) All terms and symbols are consistent with ANSI/IEEE C62.35
(4) For bi-directional types having V
WM of 10 V and less, the ID limit is doubled
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
BZW04P10-E3/54
0.350
54
550
13" diameter paper tape and reel
BZW04P10HE3/54 (1)
0.350
54
550
13" diameter paper tape and reel
Note
(1) AEC Q101 qualified
Revision: 12-Jul-11
Document Number: 88316
3
For technical questions within your region: [email protected], [email protected], [email protected]com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BZW04P-5V8 thru BZW04-376
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
10 000
Non-Repetitive Pulse
Waveform shown in Fig. 3
TA = 25 °C
CJ - Junction Capacitance (pF)
PPPM - Peak Pulse Power (kW)
100
10
1
0.1
1000
Measured at
Zero Bias
100
Measured at Stand-Off
Voltage VWM
10
0.1
1
10
100
1000
10 000
1
10
100
1000
td - Pulse Width (µs)
VBR - Breakdown Voltage (V)
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 4 - Typical Junction Capacitance
100
100
PD - Power Dissipation (%)
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage (%)
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
75
50
25
60 Hz
Resistive or
Inductive Load
75
50
L = 0.375" (9.5 mm)
Lead Lengths
25
0
0
0
25
50
75
100
125
150
175
0
200
25
50
75
100
125
150
175
TJ - Initial Temperature (°C)
TL - Lead Temperature (°C)
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature
Fig. 5 - Power Derating Curve
tr = 10 µs
100
TJ = 25 °C
Pulse Width (td)
is defined as the Point
where the Peak Current
Decays to 50 % of IPPM
Peak Value
IPPM
100
Half Value - IPP
IPPM
2
50
TJ = TJ Max.
8.3 ms Single Half Sine-Wave
Peak Forward Surge Current (A)
IPPM - Peak Pulse Current, % IRSM
150
200
10/1000 µs Waveform
as defined by R.E.A.
td
0
10
0
1.0
2.0
3.0
t - Time (ms)
Fig. 3 - Pulse Waveform
Revision: 12-Jul-11
4.0
1
10
100
Number of Cycles at 60 Hz
Fig. 6 - Max. Non-Repetitive Forward Surge Current
Uni-Directional Only
Document Number: 88316
4
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BZW04P-5V8 thru BZW04-376
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-204AL (DO-41)
1.0 (25.4)
MIN.
0.107 (2.7)
0.080 (2.0)
DIA.
0.205 (5.2)
0.160 (4.1)
1.0 (25.4)
MIN.
0.026 (0.66)
0.023 (0.58)
DIA.
Revision: 12-Jul-11
Document Number: 88316
5
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1