ERbic CAN, horizontal ERbic CAN with PU interface, horizontal with switch with switch (switchable bus termination resistor) 8 #4/40 UNC (inner thread) 17,5 without switch 10 21,1 47,4 21,1 47,4 10 without switch #4/40 UNC #4/40 UNC 5,1 5,1 25 25 35 35 with switch 44,8 Switch 103642 103668 124620 124655 without CAN high, low, ground (HLG) Screw clamp 10 pin CAN signals incl. power supply anthracite CAN high, low, ground (HLG) Screw clamp 2x3 pin CAN high, low, ground (HLG) Screw clamp 5 pin CAN signals incl. power supply 154826 CAN signals incl. power supply 103662 Screw clamp 2x3 pin CAN high, low, ground (HLG) 134149 Screw clamp 2x3 pin CAN high, low, ground (HLG) 104670 Termination Part number Type Screw clamp 5 pin Type green Programming interface (PU) CAN signals incl. power supply Screw clamp 2x3 pin Termination 124621 Part number Spring clamp 6 pin Screw clamp 10 pin 103644 103643 64,6 Node 124654 pin 1 44,8 switch 64,6 Cable termination Colour Signals / Power supply #4-40 UNC Fastening screw thread Switch CAN high, low, ground (HLG) Spring clamp 6 pin CAN signals incl. power supply anthracite Screw clamp 10 pin with Node CAN signals incl. power supply Screw clamp 10 pin Programming interface (PU) Notes: 1. Operating temperature: -20°C / +70°C 2. Protection class: IP40 3. Sealing plate: Drawing number 103356. Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. switch without switch OFF ON ON 16 without switch OFF 16 with switch 144744 with switch 17,5 4,5 - 4,5 - (switchable bus termination resistor) pin 1 8 pin 1 Screw clamp 5 pin green Cable termination Colour Tolerances Information: in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. CAN signals incl. power supply Signals / Power Fastening supply screw thread Scale All Dimensions Date 1:1 Angaben zu entsprechender Ident-Nr. siehe Fertigungsunterlagen. For further information about I.D. number see manufacturing document. Designation Subject to modification without prior notice. Drawing will not be updated. ERbic horizontal CAN General plan 324265 www.ERNI.com Index #4-40 UNC Class ERBIC I A2