IRF 4GBU005F

PART OBSOLETE - EOL18
Bulletin I2717 rev. G 05/02
4GBU Series
4.0 Amps Single Phase Full Wave
Bridge Rectifier
Features
Diode chips are glass passivated
IO(AV) = 4A
VRRM = 50/ 800V
Suitable for Universal hole mounting
Easy to assemble & install on P.C.B.
High Surge Current Capability
High Isolation between terminals and molded case (1500 V RMS)
Lead free terminals solderable as per MIL-STD-750 Method 2026
Terminals suitable for high temperature soldering at 260°C for 8-10 secs
UL E160375 approved
Description
These GBU Series of Single Phase Bridges consist
of four glass passivated silicon junction connected
as a Full Wave Bridge. These four junctions are
encapsulated by plastic molding technique. These
Bridges are mainly used in Switch Mode power
supply and in industrial and consumer equipment.
Major Ratings and Characteristics
Parameters
4GBU
Units
4
A
@ TC
100
°C
@ 50Hz
150
A
@ 60Hz
158
A
@ 50Hz
113
A2s
@ 60Hz
104
A2s
50 to 800
V
IO
IFSM
2
I t
VRRM
range
TJ
www.irf.com
- 55 to 150
o
4GBU
C
1
4GBU Series
Bulletin I2717 rev. G 05/02
ELECTRICAL SPECIFICATIONS
Voltage Ratings
Type number
4GBU
4GBU...F
Voltage
Code
VRRM , max repetitive
peak rev. voltage
TJ = TJ max.
V
VRMS , max RMS
voltage
TJ = TJ max.
V
IRRM max.
@ rated VRRM
TJ = 25°C
µA
IRRM max.
@ rated VRRM
TJ = 150°C
µA
005
01
02
04
06
08
50
100
200
400
600
800
35
70
140
280
420
560
5
5
5
5
5
5
400
400
400
400
400
400
Forward Conduction
Parameters
IO
IFSM
Maximum DC output current
Maximum peak, one-cycle
4GBU
Unit
4
A
Conditions
TC = 100°C, Resistive & inductive load
3.2
TC = 100°C, Capacitive load
150
t = 10ms
158
t = 8.3ms
non-repetitive surge current,
following any rated load condition
TJ = 150°C
and with rated VRRM reapplied
I2t
VFM
Maximum I 2t for fusing,
113
A2s
initial TJ = TJ max
104
Maximum peak forward voltage
1.0
V
5
µA
50 to 800
V
t = 10ms
t = 8.3ms
TJ = 25 oC, IFM = 4A
per diode
IRM
Typical peak reverse leakage
TJ = 25 oC, 100% VRRM
curren t per diode
VRRM
Maximum repetitive peak
reverse voltage range
Thermal and Mechanical Specifications
Parameters
TJ
Operating and storage
Tstg
temperature range
RthJC
Max. thermal resistance
4GBU
-55 to 150
Unit
Conditions
C
o
4.2
°C/ W
DC rated current through bridge (1)
22
°C/ W
DC rated current through bridge (1)
4 (0.14)
g (oz)
1.0
9.0
Nm
Lb.in
junction to case
RthJA
Thermal resistance,
junction to ambient
W
Approximate weight
T
Mounting Torque
Bridge to Heatsink
Note (1): Devices mounted on 40x 40x1.5mm aluminum plate; use silicon thermal compound for maximum
heat transfer and bolt down using 3mm screw
2
www.irf.com
4GBU Series
Bulletin I2717 rev. G 05/02
Ordering Information Table
Device Code
4
GBU
08
F
1
2
3
4
1
-
Bridge current
2
-
Basic Part Number
3
-
Voltage Code: code x 100 = VRRM
4
-
Lead Forming: 7.5 mm
Outline Table
Add suffix "F" for 7.5 mm equal space lead forming
All dimensions are in millimetres
www.irf.com
3
4GBU Series
1000
160
Instantaneous Forward Current (A)
Maximum Allowable Case Temperature (°C)
Bulletin I2717 rev. G 05/02
4GBU Series
150
140
130
180˚
(Rect)
120
110
180˚
(Sine)
100
100
10
T J = 25˚C
T J = 150˚C
1
4GBU Series
0.1
90
0
1
2
3
4
0
5
Average Forward Current (A)
4
7
180˚
(Sine)
180˚
(Rect)
5
4
3
2
4GBU Series
T J = 150˚C
1
0
0
0.5
1
1.5
2
2.5
3
3.5
1
1.5
2
2.5
3
3.5
Fig. 2 - Forward Voltage Drop Characteristics
Peak Half Sine Wave Forward Current (A)
Maximum Average Forward Power Loss (W)
Fig. 1 - Current Ratings Characteristics
6
0.5
Instantaneous Forward Voltage (V)
4
160
At Any Rated Load Condition And With
Rated Vrrm Applied Following Surge.
Initial Tj = 150˚C
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
140
120
100
80
60
4GBU Series
40
1
10
100
Average Forward Current (A)
Number of Equal Amplitude Half Cycle Current Pulses (N)
Fig. 3 - Total Power Loss Characteristics
Fig. 4 - Maximum Non-Repetitive Surge Current
www.irf.com
4GBU Series
Bulletin I2717 rev. G 05/02
Data and specifications subject to change without notice.
This product has been designed and qualified for Multiple Level.
Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 05/02
www.irf.com
5