INTEGRATED CIRCUITS DATA SHEET For a complete data sheet, please also download: • The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications • The IC06 74HC/HCT/HCU/HCMOS Logic Package Information • The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines 74HC/HCT597 8-bit shift register with input flip-flops Product specification File under Integrated Circuits, IC06 December 1990 Philips Semiconductors Product specification 8-bit shift register with input flip-flops 74HC/HCT597 FEATURES GENERAL DESCRIPTION • 8-bit parallel storage register inputs The 74HC/HCT597 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. • Shift register has direct overriding load and clear • Output capability: standard • ICC category: MSI The 74HC/HCT597 consist each of an 8-bit storage register feeding a parallel-in, serial-out 8-bit shift register. Both the storage register and the shift register have positive edge-triggered clocks. The shift register also has direct load (from storage) and clear inputs. QUICK REFERENCE DATA GND = 0 V; Tamb = 25 °C; tr = tf = 6 ns TYPICAL SYMBOL PARAMETER CONDITIONS UNIT HC tPHL/ tPLH propagation delay CL = 15 pF; VCC = 5 V SHCP to Q 17 20 ns STCP to Q 25 29 ns PL to Q 21 26 ns 96 83 MHz 3.5 3.5 pF 29 32 pF fmax maximum clock frequency SHCP CI input capacitance CPD power dissipation capacitance per package notes 1 and 2 Notes 1. CPD is used to determine the dynamic power dissipation (PD in µW): PD = CPD × VCC2 × fi + ∑ (CL × VCC2 × fo) where: fi = input frequency in MHz fo = output frequency in MHz ∑ (CL × VCC2 × fo) = sum of outputs CL = output load capacitance in pF VCC = supply voltage in V 2. For HC the condition is VI = GND to VCC For HCT the condition is VI = GND to VCC − 1.5 V ORDERING INFORMATION See “74HC/HCT/HCU/HCMOS Logic Package Information”. December 1990 HCT 2 Philips Semiconductors Product specification 8-bit shift register with input flip-flops 74HC/HCT597 PIN DESCRIPTION PIN NO. SYMBOL NAME AND FUNCTION 8 GND ground (0 V) 9 Q serial data output 10 MR asynchronous reset input (active LOW) 11 SHCP shift clock input (LOW-to-HIGH, edge-triggered) 12 STCP storage clock input (LOW-to-HIGH, edge-triggered) 13 PL parallel load input (active LOW) 14 DS serial data input 15, 1, 2, 3, 4, 5, 6, 7 D0 to D7 parallel data inputs 16 VCC positive supply voltage Fig.1 Pin configuration. December 1990 Fig.2 Logic symbol. 3 Fig.3 IEC logic symbol. Philips Semiconductors Product specification 8-bit shift register with input flip-flops 74HC/HCT597 Fig.4 Functional diagram. FUNCTION TABLE STCP SHCP PL MR FUNCTION ↑ X X X data loaded to input latches ↑ X L H data loaded from inputs to shift register no clock edge X L H data transferred from input flip-flops to shift register X X L L invalid logic, state of shift register indeterminate when signals removed X X H L shift register cleared X ↑ H H shift register clocked Qn = Qn−1, Q0 = DS Notes 1. H L X ↑ = HIGH voltage level = LOW voltage level = don’t care = LOW-to-HIGH CP transition December 1990 4 Philips Semiconductors Product specification 8-bit shift register with input flip-flops 74HC/HCT597 Fig.5 Logic diagram. December 1990 5 Philips Semiconductors Product specification 8-bit shift register with input flip-flops 74HC/HCT597 Fig.6 Timing diagram. December 1990 6 Philips Semiconductors Product specification 8-bit shift register with input flip-flops 74HC/HCT597 DC CHARACTERISTICS FOR 74HC For the DC characteristics see “74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard ICC category: MSI AC CHARACTERISTICS FOR 74HC GND = 0 V; tr = tf = 6 ns; CL = 50 pF Tamb (°C) TEST CONDITIONS 74HC SYMBOL PARAMETER −40 to +85 +25 −40 to +125 min. typ. max. min. max. min. UNIT V WAVEFORMS CC (V) max. tPHL/ tPLH propagation delay SHCP to Q 55 20 16 175 35 30 220 44 37 265 53 45 ns 2.0 4.5 6.0 Fig.7 tPHL propagation delay MR to Q 58 21 17 175 35 30 220 44 37 265 53 45 ns 2.0 4.5 6.0 Fig.8 tPHL/ tPLH propagation delay STCP to Q 80 29 23 250 50 43 315 63 54 375 75 64 ns 2.0 4.5 6.0 Fig.7 tPHL/ tPLH propagation delay PL to Q 69 25 20 215 43 37 270 54 46 325 65 55 ns 2.0 4.5 6.0 Fig.9 tTHL/ tTLH output transition time 19 7 6 75 15 13 95 19 16 110 22 19 ns 2.0 4.5 6.0 Fig.9 tW STCP pulse width HIGH or LOW 80 16 14 11 4 3 100 20 17 120 24 20 ns 2.0 4.5 6.0 Fig.7 tW SHCP pulse width HIGH or LOW 80 16 14 14 5 4 100 20 17 120 24 20 ns 2.0 4.5 6.0 Fig.7 tW MR pulse width LOW 80 16 14 22 8 6 100 20 17 120 24 20 ns 2.0 4.5 6.0 Fig.8 tW PL pulse width LOW 80 16 14 22 8 6 100 20 17 120 24 20 ns 2.0 4.5 6.0 Fig.9 trem removal time MR to SHCP 60 12 10 −3 −1 −1 75 15 13 90 18 15 ns 2.0 4.5 6.0 Fig.10 tsu set-up time Dn to STCP 60 12 10 8 3 2 75 15 13 90 18 15 ns 2.0 4.5 6.0 Fig.11 December 1990 7 Philips Semiconductors Product specification 8-bit shift register with input flip-flops 74HC/HCT597 Tamb (°C) TEST CONDITIONS 74HC SYMBOL PARAMETER −40 to +85 +25 −40 to +125 min. typ. max. min. max. min. WAVEFORMS UNIT V CC (V) max. tsu set-up time DS to SHCP 60 12 10 11 4 3 75 15 13 90 18 15 ns 2.0 4.5 6.0 Fig.11 tsu set-up time PL to SHCP 60 12 10 11 4 3 75 15 13 90 18 15 ns 2.0 4.5 6.0 Fig.12 th hold time Dn to STCP 5 5 5 −3 −1 −1 5 5 5 5 5 5 ns 2.0 4.5 6.0 Fig.11 th hold time PL, DS to SHCP 5 5 5 −6 −2 −2 5 5 5 5 5 5 ns 2.0 4.5 6.0 Fig.11 fmax maximum pulse frequency SHCP 6.0 30 35 29 87 104 4.8 24 28 4.0 20 24 MHz 2.0 4.5 6.0 Fig.7 December 1990 8 Philips Semiconductors Product specification 8-bit shift register with input flip-flops 74HC/HCT597 DC CHARACTERISTICS FOR 74HCT For the DC characteristics see “74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard ICC category: MSI Note to HCT types The value of additional quiescent supply current (∆ICC) for a unit load of 1 is given in the family specifications. To determine ∆ICC per input, multiply this value by the unit load coefficient shown in the table below. INPUT UNIT LOAD COEFFICIENT DS Dn PL, MR STCP, SHCP 0.25 0.30 1.50 1.50 December 1990 9 Philips Semiconductors Product specification 8-bit shift register with input flip-flops 74HC/HCT597 AC WAVEFORMS FOR 74HCT GND = 0 V; tr = tf = 6 ns; CL = 50 pF Tamb (°C) TEST CONDITIONS 74HCT SYMBOL PARAMETER −40 to +85 +25 −40 to +125 min. typ. max. min. max. min. UNIT V CC WAVEFORMS (V) max. tPHL/ tPLH propagation delay SHCP to Q 23 40 50 60 ns 4.5 Fig.7 tPHL propagation delay MR to Q 28 49 61 74 ns 4.5 Fig.8 tPHL/ tPLH propagation delay STCP to Q 33 57 71 86 ns 4.5 Fig.7 tPHL/ tPLH propagation delay PL to Q 30 52 65 78 ns 4.5 Fig.9 tTHL/ tTLH output transition time 7 15 19 22 ns 4.5 Fig.9 tW SHCP pulse width HIGH or LOW 16 7 20 24 ns 4.5 Fig.7 tW STCP pulse width HIGH or LOW 16 6 20 24 ns 4.5 Fig.7 tW MR pulse width LOW 25 14 31 38 ns 4.5 Fig.8 tW PL pulse width LOW 20 10 25 30 ns 4.5 Fig.9 trem removal time MR to SHCP 12 −2 15 18 ns 4.5 Fig.10 tsu set-up time Dn to STCP 12 5 15 18 ns 4.5 Fig.11 tsu set-up time DS to SHCP 12 2 15 18 ns 4.5 Fig.11 tsu set-up time PL to SHCP 12 4 15 18 ns 4.5 Fig.12 th hold time Dn to STCP 5 −1 5 5 ns 4.5 Fig.11 th hold time PL, DS to SHCP 5 −2 5 5 ns 4.5 Fig.11 fmax maximum pulse frequency SHCP 30 75 24 20 MHz 4.5 Fig.7 December 1990 10 Philips Semiconductors Product specification 8-bit shift register with input flip-flops 74HC/HCT597 AC WAVEFORMS (1) HC : VM = 50%; VI = GND to VCC. HCT : VM = 1.3 V; VI = GND to 3 V. (1) HC : VM = 50%; VI = GND to VCC. HCT : VM = 1.3 V; VI = GND to 3 V. Fig.7 Fig.8 Waveforms showing the SHCP and STCP inputs to Q output propagation delays, the SHCP and STCP pulse widths and maximum clock pulse frequency. Waveforms showing the MR input to Q output propagation delays and the MR pulse width. (1) HC : VM = 50%; VI = GND to VCC. HCT : VM = 1.3 V; VI = GND to 3 V. (1) HC : VM = 50%; VI = GND to VCC. HCT : VM = 1.3 V; VI = GND to 3 V. Fig.9 Fig.10 Waveforms showing the MR input to SHCP, STCP removal times. Waveforms showing the PL input to Q output propagation delays, PL pulse width and output transition times. December 1990 11 Philips Semiconductors Product specification 8-bit shift register with input flip-flops 74HC/HCT597 (1) HC : VM = 50%; VI = GND to VCC. HCT : VM = 1.3 V; VI = GND to 3 V. (1) HC : VM = 50%; VI = GND to VCC. HCT : VM = 1.3 V; VI = GND to 3 V. Fig.11 Waveforms showing hold and set-up times for DS, Dn inputs to SHCP, STCP inputs. Fig.12 Waveforms showing set-up times for PL input to SHCP input. PACKAGE OUTLINES See “74HC/HCT/HCU/HCMOS Logic Package Outlines”. December 1990 12