BAS16H High-speed switching diode in SOD123F package Rev. 01 — 15 April 2005 Product data sheet 1. Product profile 1.1 General description The BAS16H is a high-speed switching diode fabricated in planar technology, and encapsulated in a SOD123F small and flat plastic package. 1.2 Features ■ ■ ■ ■ ■ High switching speed: max. 4 ns Continuous reverse voltage: max. 100 V Repetitive peak reverse voltage: max. 100 V Repetitive peak forward current: max. 500 mA Small and flat plastic package 1.3 Applications ■ ■ ■ ■ ■ High-speed switching in hybrid thick and thin-film circuits Mobile communication Digital (still) cameras Personal Digital Assistants (PDA) Personal Computer Memory Card International Association (PCMCIA) cards 1.4 Quick reference data Table 1: Quick reference data Symbol Parameter Min Typ Max Unit VR reverse voltage - - 100 V IFRM repetitive peak forward current - - 500 mA trr reverse recovery time - - 4 ns [1] Conditions [1] When switched from IF = 10 mA to IR = 10 mA; RL = 100 Ω; measured at IR = 1 mA. BAS16H Philips Semiconductors High-speed switching diode in SOD123F package 2. Pinning information Table 2: Pinning Pin Description 1 cathode 2 anode Simplified outline Symbol [1] 1 2 sym006 [1] The marking bar indicates the cathode. 3. Ordering information Table 3: Ordering information Type number Package Name Description Version BAS16H - plastic surface mounted package; 2 leads SOD123F 4. Marking Table 4: Marking codes Type number Marking code BAS16H A1 9397 750 14478 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 — 15 April 2005 2 of 10 BAS16H Philips Semiconductors High-speed switching diode in SOD123F package 5. Limiting values Table 5: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions VRRM repetitive peak reverse voltage VR reverse voltage IF forward current IFRM repetitive peak forward current IFSM non-repetitive peak forward current [1] Max Unit - 100 V - 100 V - 215 mA - 500 mA tp = 50 µs [2] - 4 A tp = 1 ms [2] - 2 A tp = 10 ms [2] - 1.5 A [1] - 0.38 W [3] - 0.83 W total power dissipation Ptot Min Tj junction temperature - 150 °C Tamb ambient temperature −65 +150 °C Tstg storage temperature −65 +150 °C [1] Device mounted on an FR4 Printed-Circuit Board (PCB) with 60 µm copper strip line. [2] Square wave; Tj = 25 °C prior to surge. [3] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2. 6. Thermal characteristics Table 6: Symbol Rth(j-a) Rth(j-sp) Thermal characteristics Parameter Conditions thermal resistance from junction to ambient thermal resistance from junction to solder point Typ Max Unit - - 330 K/W [2] - - 150 K/W - - 70 K/W [1] Device mounted on an FR4 PCB with 60 µm copper strip line. [2] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2. 9397 750 14478 Product data sheet Min [1] © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 — 15 April 2005 3 of 10 BAS16H Philips Semiconductors High-speed switching diode in SOD123F package 7. Characteristics Table 7: Characteristics Tamb = 25 °C unless otherwise specified. Symbol VF IR Cd Parameter Conditions forward voltage reverse current diode capacitance Min Typ Max Unit IF = 1 mA [1] - - 715 mV IF = 10 mA [1] - - 855 mV IF = 50 mA [1] - - 1 V IF = 150 mA [1] - - 1.25 V VR = 25 V - - 30 nA VR = 75 V - - 1 µA VR = 25 V; Tj = 150 °C - - 30 µA VR = 75 V; Tj = 150 °C - - 50 µA VR = 0 V; f = 1 MHz trr reverse recovery time [2] VFR forward recovery voltage [3] [1] - 1.5 pF - - 4 ns - - 1.75 V Pulse test: tp ≤ 300 µs; δ ≤ 0.02. [2] When switched from IF = 10 mA to IR = 10 mA; RL = 100 Ω; measured at IR = 1 mA. [3] When switched from IF = 10 mA; tp = 20 ns. 9397 750 14478 Product data sheet - © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 — 15 April 2005 4 of 10 BAS16H Philips Semiconductors High-speed switching diode in SOD123F package mbg382 300 IF (mA) (1) (2) 006aaa308 10 IFSM (A) (3) 200 100 0 0 1 VF (V) 2 1 10−2 10−1 1 10 tp (ms) (1) Tamb = 150 °C; typical values Based on square wave currents (2) Tamb = 25 °C; typical values Tj = 25 °C; prior to surge (3) Tamb = 25 °C; maximum values Fig 1. Forward current as a function of forward voltage mga884 105 Fig 2. Non-repetitive peak forward current as a function of pulse duration mbg446 0.8 Cd (pF) IR (nA) VR = 75 V 104 max 103 0.6 75 V 0.4 25 V 102 0.2 typ typ 10 0 0 100 Tj (°C) 200 0 4 8 12 VR (V) 16 f = 1 MHz; Tj = 25 °C Fig 3. Reverse current as a function of junction temperature Fig 4. Diode capacitance as a function of reverse voltage; typical values 9397 750 14478 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 — 15 April 2005 5 of 10 BAS16H Philips Semiconductors High-speed switching diode in SOD123F package 8. Test information tr tp t D.U.T. 10 % + IF IF RS = 50 Ω SAMPLING OSCILLOSCOPE V = VR + IF × RS trr t Ri = 50 Ω (1) 90 % VR mga881 input signal output signal (1) IR = 1 mA Input signal: reverse pulse rise time tr = 0.6 ns; reverse voltage pulse duration tp = 100 ns; duty factor δ = 0.05 Oscilloscope: rise time tr = 0.35 ns Fig 5. Reverse recovery time test circuit and waveforms I 1 kΩ RS = 50 Ω D.U.T. 450 Ω I V 90 % OSCILLOSCOPE VFR Ri = 50 Ω 10 % t tr t tp input signal output signal mga882 Input signal: forward pulse rise time tr = 20 ns; forward current pulse duration tp ≥ 100 ns; duty factor δ ≤ 0.005 Fig 6. Forward recovery voltage test circuit and waveforms 9397 750 14478 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 — 15 April 2005 6 of 10 BAS16H Philips Semiconductors High-speed switching diode in SOD123F package 9. Package outline 1.7 1.5 1.2 1.0 1 0.55 0.35 3.6 3.4 2.7 2.5 2 0.70 0.55 0.25 0.10 Dimensions in mm 04-11-29 Fig 7. Package outline SOD123F 10. Packing information Table 8: Packing methods The indicated -xxx are the last three digits of the 12NC ordering code. [1] Type number Package Description Packing quantity 3000 BAS16H [1] SOD123F 4 mm pitch, 8 mm tape and reel -115 For further information and the availability of packing methods, see Section 16. 11. Soldering 4.4 4 2.9 1.6 solder lands solder resist 2.1 1.6 1.1 1.2 solder paste occupied area 1.1 (2×) Dimensions in mm Fig 8. Reflow soldering footprint 9397 750 14478 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 — 15 April 2005 7 of 10 BAS16H Philips Semiconductors High-speed switching diode in SOD123F package 12. Revision history Table 9: Revision history Document ID Release date Data sheet status Change notice Doc. number Supersedes BAS16H_1 20050415 Product data sheet - 9397 750 14478 - 9397 750 14478 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 — 15 April 2005 8 of 10 BAS16H Philips Semiconductors High-speed switching diode in SOD123F package 13. Data sheet status Level Data sheet status [1] Product status [2] [3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 14. Definitions 15. Disclaimers Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support — These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Right to make changes — Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 16. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: [email protected] 9397 750 14478 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 — 15 April 2005 9 of 10 BAS16H Philips Semiconductors High-speed switching diode in SOD123F package 17. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . General description. . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick reference data. . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Thermal characteristics. . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Test information . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Packing information. . . . . . . . . . . . . . . . . . . . . . Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 2 2 2 3 3 4 6 7 7 7 8 9 9 9 9 © Koninklijke Philips Electronics N.V. 2005 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 15 April 2005 Document number: 9397 750 14478 Published in The Netherlands