Optoway TRML-8100G 1 *********************************************************************************************************************************************************************** TRML-8100G / TRML-8100BG (RoHS Compliant) 3.3V / 850 nm / 4.25 Gbps SFF LC MULTI-MODE TRANSCEIVER ********************************************************************************************************************************************************************** FEATURES APPLICATIONS l Up to 4.25 Gb/s Bi-directional Data Link l Duplex LC Multi-Mode Transceiver l Compliant with Fibre Channel FC-PH-2 for 400-M5-SN-1 and 400-M6-SN-1 l Compliant with IEEE 802.3z 1000BASE-SX l Link Distance at 4.25 Gbd 150 m links with 50/125 µm MMF Cables 70 m links with 62.5/125 µm MMF Cables l Link Distance at 2.125 Gbd 300 m links with 50/125 µm MMF Cables 150 m links with 62.5/125 µm MMF Cables l Link Distance at 1.063 Gbd 500 m links with 50/125 µm MMF Cables 300 m links with 62.5/125 µm MMF Cables l Small Form Factor, RJ-45 size, 2X5 pin Package l AC/AC Coupled Signal Input / Output l LVTTL Transmitter Disable Input l LVTTL Signal Detect Output l Single +3.3 V Power Supply l RoHS Compliant l 0 to 70oC Operating: TRML-8100G l -10 to 85oC Operating: TRML-8100BG l Wave Solderable and Aqueous Washable l Class 1 Laser International Safety Standard IEC-60825 Compliant l Tri-Rate 4.25/2.125/1.063 Gb/s Fiber Channel l 1.25 Gb/s 1000BASE-SX Ethernet DESCRIPTION The TRML-8100G series multi-mode transceivers is small form factor, low power, high performance module for bi-directional serial optical data communications such as Fibre Channel 4x/2x/1x and Gigabit Ethernet 1000BASE-SX. This module is designed for multi-mode fiber and operates at a nominal wavelength of 850 nm. The transmitter section uses a multiple quantum well 850 nm VCSEL and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated GaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry. LASER SAFETY This multi-mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. ORDER INFORMATION P/No. Bit Rate (Gb/s) TRML-8100G TRML-8100BG 4/2/1 4/2/1 Distance Wavelength (m) (nm) FC 400/200/100 150/300/500 400/200/100 150/300/500 850 850 Package Temp. (oC) 2X5 LC 2X5 LC 0 to 70 -10 to 85 TX Power RX Sens. RoHS (dBm) (dBm) Compliant -2.5 to -9 -15/-17/-18 Yes -2.5to -9 -15/-17/-18 Yes Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Symbol Tstg Topr Soldering Temperature Power Supply Voltage Input Voltage --Vcc --- Min -40 0 -10 0 GND Max 85 70 85 260 4.5 Vcc Units o C o C Typ 3.3 Max 3.47 70 85 o C V V Notes TRML-8100G TRML-8100BG 10 seconds on leads only Recommended Operating Conditions Parameter Power Supply Voltage Operating Temperature Symbol Vcc Topr Data Rate Power Supply Current Icc Min 3.13 0 -10 1062 4250 180 240 Units / Notes V o C / TRML-8100G o C / TRML-8100BG Mb/s mA *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 4/1/2007 V1.0 Optoway TRML-8100G 2 *********************************************************************************************************************************************************************** Transmitter Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V) Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Optical Modulation [email protected]/s Optical Modulation [email protected]/s Optical Modulation [email protected]/s Optical Rise Time Optical Fall Time Relative Intensity Noise Electrical Data Input Current – Low Data Input Current – High Differential Input Voltage Data Input Voltage – Low Data Input Voltage -- High Disable Input Voltage -- Low Disable Input Voltage -- High Shut Off Time for TxDis Symbol Min Typ Max Units Notes Po λ ∆λ OMA -9 840 --247 --850 --- -2.5 860 0.85 dBm nm nm µW 1 OMA 196 µW OMA 156 µW tr tf RIN IIL IIH VIH - V IL VIL - V CC VIH - V CC VTDIS,L VTDIS,H tDIS 90 90 -118 -350 350 300 -2.0 -1.1 0 Vcc – 1.3 -1.58 -0.74 0.5 Vcc 1 ps ps dB/Hz µA µA mV V V V V ms RMS (σ) 2 20% to 80% 20% to 80% 3 3 TX Output Enabled TX Ouput Disabled Notes: 1. Output power is power coupled into a 62.5/125 µm MM fiber. 2. An OMA of 196 µW is approximately equal to an average power of -9 dBm assuming an Extinction Ratio of 9 dB. 3. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs. Receiver Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V) Parameter Optical Sensitivity @4.25Gb/s Sensitivity @2.125Gb/s Sensitivity @1.063Gb/s Maximum Input Power Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Wavelength of Operation Electrical Data Output Voltage – Low Data Output Voltage – High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Symbol Min Typ Sens Sens Sens Pin Pa Pd VOL - VCC VOH - VCC VOL VOH 0 ---31 1.0 1100 -2.0 -1.1 --------- Max Units Notes -15 40 -17 -18 ---18 --- dBm µW dBm dBm dBm dBm dBm dB nm 4 1600 -1.58 -0.74 0.5 2.0 V V V V 4 4 Transition: low to high Transition: high to low 5 5 Notes: 4. Minimum sensitivity and saturation levels at BER=1E-12 for a 27-1 PRBS. 5. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 4/1/2007 V1.0 Optoway TRML-8100G 3 *********************************************************************************************************************************************************************** CONNECTION DIAGRAM 5 4 3 2 1 MS TOP VIEW 6 7 8 9 10 PIN 1 2 3 4 5 6 7 Symbol VEERX V CC RX SD RD− RD+ V CC TX VEETX 8 TX_Disable 9 10 MS TD+ TDMS MS Notes Directly connect this pin to the receiver ground plane +3.3V dc power for the receiver section Active high on this indicates a received optical signal. Receiver Dataout Bar. See recommended circuit schematic Receiver Dataout. See recommended circuit schematic +3.3V dc power for the transmitter section Directly connect this plan to the transmitter ground plane Transmitter Disable. Connect this pin to +3.3V TTL logic “1” to disable module To enable module connect to TTL logic low “0” Transmitter Data In. See recommended circuit schematic Transmitter Data In Bar. See recommended circuit schematic Mounting Studs. Connect to Chassis Ground RECOMMENDED CIRCUIT SCHEMATIC Vee TX 7 TX_Disabl e 8 TX_Disabl e TD+ 9 LD Driver TD+ Z=50Ω 100Ω TD- 10 VccTX TD1μH Z=50Ω 6 VCC 3.3V 10nF 10μF 10nF 10μF 1μH VccRX SerDes IC 2 10nF 10μF RD- 4 Protocol IC RDZ=50Ω 100Ω POST Amp RD+ 5 RDZ=50Ω Depe ndi ng on SerDes SD 3 Signal Dete ct 4.7K to 10KΩ Vee RX 1 SFF Module *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 4/1/2007 V1.0 Optoway TRML-8100G 4 *********************************************************************************************************************************************************************** PACKAGE DIAGRAM (Units in mm) A) Standard Case TRML-8100G / TRML-8100BG B) Extended Case TRML-8100EG / TRML-8100BEG Note: Specifications subject to change without notice. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 4/1/2007 V1.0