PHILIPS BAS45A

DISCRETE SEMICONDUCTORS
DATA SHEET
dbook, halfpage
M3D050
BAS45A
Low-leakage diode
Product data sheet
Supersedes data of June 1994
1996 Mar 13
NXP Semiconductors
Product data sheet
Low-leakage diode
BAS45A
FEATURES
DESCRIPTION
• Continuous reverse voltage:
max. 125 V
Epitaxial medium-speed switching diode with a low leakage current in a
hermetically-sealed glass SOD68 (DO-34) package.
• Repetitive peak forward current:
max. 625 mA
• Low reverse current: max. 1 nA
k
handbook, halfpage
a
• Switching time: typ. 1.5 μs.
MAM156
APPLICATION
• Low leakage current applications.
Fig.1 Simplified outline (SOD68; DO-34) and symbol.
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 134).
SYMBOL
PARAMETER
CONDITIONS
MIN.
MAX.
−
125
V
−
125
V
−
250
mA
−
625
mA
tp = 1 μs
−
4
A
tp = 1 ms
−
1
A
tp = 1 s
−
0.5
A
Tamb = 25 °C
−
300
VRRM
repetitive peak reverse voltage
VR
continuous reverse voltage
IF
continuous forward current
IFRM
repetitive peak forward current
IFSM
non-repetitive peak forward current square wave; Tj = 25 °C prior to
surge; see Fig.4
see Fig.2; note 1
UNIT
Ptot
total power dissipation
Tstg
storage temperature
−65
+175
°C
Tj
junction temperature
−
175
°C
Note
1. Device mounted on a printed-circuit board without metallization pad.
1996 Mar 13
2
mW
NXP Semiconductors
Product data sheet
Low-leakage diode
BAS45A
ELECTRICAL CHARACTERISTICS
Tj = 25 °C unless otherwise specified.
SYMBOL
VF
IR
PARAMETER
forward voltage
reverse current
CONDITIONS
TYP.
MAX.
UNIT
see Fig.3
IF = 1 mA
−
780
mV
IF = 10 mA
−
860
mV
IF = 100 mA
−
1 000
mV
VR = 125 V; Emax = 100 lx
−
1
nA
VR = 30 V; Tj = 125 °C; Emax = 100 lx
−
300
nA
VR = 125 V; Tj = 125 °C; Emax = 100 lx
−
500
nA
VR = 125 V; Tj = 150 °C; Emax = 100 lx
−
2
μA
−
4
pF
1.5
−
μs
see Fig.5
Cd
diode capacitance
f = 1 MHz; VR = 0; see Fig.6
trr
reverse recovery time
when switched from IF = 10 mA to
IR = 10 mA; RL = 100 Ω; measured at
IR = 1 mA; see Fig.7
THERMAL CHARACTERISTICS
SYMBOL
PARAMETER
CONDITIONS
VALUE
UNIT
Rth j-tp
thermal resistance from junction to tie-point
8 mm from the body
300
K/W
Rth j-a
thermal resistance from junction to ambient
lead length 10 mm; note 1
500
K/W
Note
1. Device mounted on a printed-circuit board without metallization pad.
1996 Mar 13
3
NXP Semiconductors
Product data sheet
Low-leakage diode
BAS45A
GRAPHICAL DATA
MBG522
300
MBG523
300
handbook, halfpage
handbook, halfpage
IF
(mA)
IF
(mA)
(1)
200
200
100
100
0
0
100
Tamb (oC)
(2)
(3)
0
0
200
0.5
Device mounted on a printed-circuit board without metallization pad.
(1) Tj = 150 °C; typical values.
(2) Tj = 25 °C; typical values.
(3) Tj = 25 °C; maximum values.
Fig.2
Fig.3
Maximum permissible continuous forward
current as a function of ambient temperature.
1.0
VF (V)
1.5
Forward current as a function of forward
voltage.
MBG704
102
handbook, full pagewidth
IFSM
(A)
10
1
10−1
1
10
102
103
tp (μs)
Based on square wave currents;Tj = 25 °C prior to surge.
Fig.4
Maximum permissible non-repetitive peak forward current as a function of pulse duration.
1996 Mar 13
4
104
NXP Semiconductors
Product data sheet
Low-leakage diode
BAS45A
MBD456
4
10halfpage
handbook,
IR
(nA)
3
MBG524
3
handbook, halfpage
Cd
(pF)
10
2
max
10 2
typ
10
1
1
10 1
0
50
100
T j ( oC)
0
150
0
5
VR = 125 V.
f = 1 MHz; Tj = 25 °C.
Fig.5
Fig.6
Reverse current as a function of junction
temperature.
handbook, full pagewidth
tr
10
15
VR (V)
20
Diode capacitance as a function of reverse
voltage; typical values.
tp
t
D.U.T.
RS = 50 Ω
V = VR
IF x R S
IF
10%
IF
SAMPLING
OSCILLOSCOPE
t
R i = 50 Ω
MGA881
(1)
90%
VR
input signal
Fig.7 Reverse recovery time test circuit and waveforms.
1996 Mar 13
t rr
5
output signal
NXP Semiconductors
Product data sheet
Low-leakage diode
BAS45A
PACKAGE OUTLINE
handbook, full pagewidth
0.55
max
1.6
max
25.4 min
3.04
max
25.4 min
Dimensions in mm.
The black marking band indicates the cathode.
Fig.8 SOD68 (DO-34).
1996 Mar 13
6
MSA212 - 1
NXP Semiconductors
Product data sheet
Low-leakage diode
BAS45A
DATA SHEET STATUS
DOCUMENT
STATUS(1)
PRODUCT
STATUS(2)
DEFINITION
Objective data sheet
Development
This document contains data from the objective specification for product
development.
Preliminary data sheet
Qualification
This document contains data from the preliminary specification.
Product data sheet
Production
This document contains the product specification.
Notes
1. Please consult the most recently issued document before initiating or completing a design.
2. The product status of device(s) described in this document may have changed since this document was published
and may differ in case of multiple devices. The latest product status information is available on the Internet at
URL http://www.nxp.com.
DISCLAIMERS
above those given in the Characteristics sections of this
document is not implied. Exposure to limiting values for
extended periods may affect device reliability.
General ⎯ Information in this document is believed to be
accurate and reliable. However, NXP Semiconductors
does not give any representations or warranties,
expressed or implied, as to the accuracy or completeness
of such information and shall have no liability for the
consequences of use of such information.
Terms and conditions of sale ⎯ NXP Semiconductors
products are sold subject to the general terms and
conditions of commercial sale, as published at
http://www.nxp.com/profile/terms, including those
pertaining to warranty, intellectual property rights
infringement and limitation of liability, unless explicitly
otherwise agreed to in writing by NXP Semiconductors. In
case of any inconsistency or conflict between information
in this document and such terms and conditions, the latter
will prevail.
Right to make changes ⎯ NXP Semiconductors
reserves the right to make changes to information
published in this document, including without limitation
specifications and product descriptions, at any time and
without notice. This document supersedes and replaces all
information supplied prior to the publication hereof.
No offer to sell or license ⎯ Nothing in this document
may be interpreted or construed as an offer to sell products
that is open for acceptance or the grant, conveyance or
implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Suitability for use ⎯ NXP Semiconductors products are
not designed, authorized or warranted to be suitable for
use in medical, military, aircraft, space or life support
equipment, nor in applications where failure or malfunction
of an NXP Semiconductors product can reasonably be
expected to result in personal injury, death or severe
property or environmental damage. NXP Semiconductors
accepts no liability for inclusion and/or use of NXP
Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at
the customer’s own risk.
Export control ⎯ This document as well as the item(s)
described herein may be subject to export control
regulations. Export might require a prior authorization from
national authorities.
Quick reference data ⎯ The Quick reference data is an
extract of the product data given in the Limiting values and
Characteristics sections of this document, and as such is
not complete, exhaustive or legally binding.
Applications ⎯ Applications that are described herein for
any of these products are for illustrative purposes only.
NXP Semiconductors makes no representation or
warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values ⎯ Stress above one or more limiting
values (as defined in the Absolute Maximum Ratings
System of IEC 60134) may cause permanent damage to
the device. Limiting values are stress ratings only and
operation of the device at these or any other conditions
1996 Mar 13
7
NXP Semiconductors
Customer notification
This data sheet was changed to reflect the new company name NXP Semiconductors. No changes were
made to the content, except for the legal definitions and disclaimers.
Contact information
For additional information please visit: http://www.nxp.com
For sales offices addresses send e-mail to: [email protected]
© NXP B.V. 2009
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
1996 Mar 13