Ultra-small Contact Image Sensor Heads, covering the character recognition LSH2001-AA10A Easy to mount on whatever sets because of its small size, this is the device best suitable for whatever detecting thanks to its deep focus point and high recognition accuracy. Applications Detection sets (e.g. surface, paper edge, paper type) Features 1） Its deep focus point enables scanning of the object without close contact to the glass bed of scanner, so that both the scanned object and the scanner bed won’t be damaged. 2）Screw holes and the alignment pin are provided for convenience of mounting. 3）16.25mm read width (40mm total width) Dimensions (Unit : mm) 40±0.5 35 Max.15 2.5 29 3 12.68 (Focus Point) .1 0 2.4 φ 11.68 (Surface Level) 0 .1 -0 .5 φ1 2− Paper Feed Direction 2− 9.2 +0 (Reading Width) 16.25 (2.5) 3.25 8 Scanning Line No.130 Pixel 8.18 (Focus Point) No.1 Pixel 7.18 (Surface Level) 4−C0.5 No.11 No.1 4− R1 0 -0. 1 14 www.rohm.com c 2011 ROHM Co., Ltd. All rights reserved. ○ 13.45 1.5 Signal Pin No. No.1 No.2 No.3 No.4 No.5 No.6 GND Ao GND GND G-LED V-LED No.7 No.8 No.9 No.10 No.11 Signal CLK SI GND GND VDD (NOTE 1) Deflection at the top of glass : ±0.5 (NOTE 2) It is possible to design ±0.2 tolerance. 9.2±0.5 2−φ Pin No. (Connector No.) Housing : SHR-11V-S-B Base : SM11B-SRSS-G-TB 6 1/4 2011.03 - Rev.B LSH2001-AA10A Data Sheet Characteristics Parameter Symbol Typ. Unit Effective scanning width − 16.25 mm Primary scan dot density − 200 dpi Total dot number − 128 dots VDD 3.3 V Scanning speed SLT 0.1 ms / line Clock frequency CLK 8 MHz Maximum dynamic range VRMax. 1.0 V Minimum dynamic range VRMin. 0.5 V Vod 0.8±0.1 V − 5 to 45 °C Power supply voltage Dark output Operating temperature Pin assignments No. Circuit I/O 1 GND I Ground 2 Ao O Analog Output 3 GND I Ground 4 VREF I Reference Voltage 5 R-GND I LED ground 6 V-LED I LED power supply 7 CLK I Clock 8 SP I Start Pulse 9 GND I Ground 10 GND I Ground 11 VDD I Power Supply 12 NC − Functions www.rohm.com c 2011 ROHM Co., Ltd. All rights reserved. ○ 2/4 2011.03 - Rev.B LSH2001-AA10A Data Sheet Timing chart (a) CLK Timing Chart 1/fCLK twCLK 50% 50% twCLK 50% 50% CLK ts 50% 50% SI tSETUP tHOLD Ao 1pixel 2pixel (b) Data Output Timing Chart After turning on the SP pulse, the analog output shape starts from the setting up point of 65 clock pulse. 1 2 65 66 67 208 CLK SP Ao Vref Output Period (64pixels) Analog Output Period 1 to 64clock 1 to 144pixels Note) Output blank part cannot be used as the analog output standard level. www.rohm.com c 2011 ROHM Co., Ltd. All rights reserved. ○ 3/4 2011.03 - Rev.B LSH2001-AA10A Data Sheet Inner circuit VDD 1μF x 1 144 1 GND SP ANALOG MEMORY CIRCUIT CLK Ao VREF VLED RGND Peripheral circuit Contact Image Sensor Heads 5 6 2 4 11 8 7 1,3,9,10 C2 R3 R2 R1 C1 R C5 C3 C4 R-GND VLED VREF Ao VDD SP CLK GND ∗ R1=R2=100Ω R3=100kΩ C1=C5=47μF C2=100pF C3=100μF, C4=0.1μF Please adjust the value of resistance to fit your interface circuit. www.rohm.com c 2011 ROHM Co., Ltd. All rights reserved. ○ 4/4 2011.03 - Rev.B Notice Notes Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. R1120A