BGY835C CATV amplifier module Rev. 01 — 8 September 2008 Product data sheet 1. Product profile 1.1 General description Hybrid high dynamic range amplifier module operating at a supply voltage of 24 V Direct Current (DC) in a SOT115J package. The module consists of two cascaded stages both in cascode configuration. CAUTION This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken during transport and handling. 1.2 Features n n n n Excellent linearity Extremely low noise High gain Excellent return loss properties 1.3 Applications n Single module line extender in CATV systems operating in the 40 MHz to 860 MHz frequency range. 1.4 Quick reference data Table 1. Quick reference data Bandwidth 40 MHz to 860 MHz; VB = 24 V; Tmb = 30 °C; ZS = ZL = 75 Ω unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit Gp power gain f = 50 MHz 33.5 - 34.5 dB 34 - - dB - - 340 mA f = 860 MHz Itot [1] total current [1] The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V. BGY835C NXP Semiconductors CATV amplifier module 2. Pinning information Table 2. Pinning Pin Description 1 input 2 common 3 common 5 +VB 7 common 8 common 9 output Simplified outline Graphic Symbol 5 1 3 5 7 9 1 9 2 3 7 8 sym095 3. Ordering information Table 3. Ordering information Type number BGY835C Package Name Description Version - rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 × 6-32 UNC and 2 extra horizontal mounting holes; 7 gold-plated in-line leads SOT115J 4. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter VB Vi Conditions Min Max Unit supply voltage - 25 V input voltage - 55 dBmV Tstg storage temperature −40 +100 °C Tmb mounting base temperature −20 +100 °C BGY835C_1 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 01 — 8 September 2008 2 of 7 BGY835C NXP Semiconductors CATV amplifier module 5. Characteristics Table 5. Characteristics Bandwidth 40 MHz to 860 MHz; VB = 24 V; Tmb = 30 °C; ZS = ZL = 75 Ω unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit Gp power gain f = 50 MHz 33.5 - 34.5 dB f = 860 MHz 34 - - dB SL slope cable equivalent f = 40 MHz to 860 MHz 0.5 - 2.5 dB FL flatness of frequency response f = 40 MHz to 860 MHz −0.5 - +0.5 dB RLin input return loss f = 40 MHz to 80 MHz 20 - - dB f = 80 MHz to 160 MHz 18.5 - - dB f = 160 MHz to 320 MHz 17 - - dB f = 320 MHz to 640 MHz 15.5 - - dB f = 640 MHz to 860 MHz 14 - - dB RLout output return loss f = 40 MHz to 80 MHz 20 - - dB f = 80 MHz to 160 MHz 18.5 - - dB f = 160 MHz to 320 MHz 17 - - dB f = 320 MHz to 640 MHz 15.5 - - dB f = 640 MHz to 860 MHz 14 - - dB ϕs21 phase response f = 50 MHz 135 - 225 deg CTB composite triple beat measured at f = 859.25 MHz [1] - - −60 dB measured at f = 860.5 MHz [1] - - −55 dB CSO composite second-order distortion NF noise figure f = 50 MHz - - 4.5 dB f = 860 MHz - - 7 dB - - 340 mA [2] total current Itot [1] 49 channels; Vo = 44 dBmV, flat output level. [2] The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V. BGY835C_1 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 01 — 8 September 2008 3 of 7 BGY835C NXP Semiconductors CATV amplifier module 6. Package outline Rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 x 6-32 UNC and 2 extra horizontal mounting holes; 7 gold-plated in-line leads SOT115J D E Z p A2 1 2 3 5 7 8 9 A L F S W c e b w M e1 d U2 q2 Q B y M B q1 x M B y M B p U1 q 0 5 10 mm scale DIMENSIONS (mm are the original dimensions) UNIT A2 A max. max. mm 20.8 9.1 OUTLINE VERSION b c d D E max. max. max. e e1 F L min. p 4.15 0.51 0.25 27.2 2.54 13.75 2.54 5.08 12.7 8.8 3.85 0.38 Q max. q q1 JEDEC JEITA U1 U2 W w x EUROPEAN PROJECTION y Z max. 0.1 3.8 ISSUE DATE 99-02-06 04-02-04 SOT115J Fig 1. S 2.4 38.1 25.4 10.2 4.2 44.75 8.2 6-32 0.25 0.7 44.25 7.8 UNC REFERENCES IEC q2 Package outline SOT115J BGY835C_1 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 01 — 8 September 2008 4 of 7 BGY835C NXP Semiconductors CATV amplifier module 7. Abbreviations Table 6. Abbreviations Acronym Description CATV Community Antenna TeleVision UNC UNified Coarse 8. Revision history Table 7. Revision history Document ID Release date Data sheet status Change notice Supersedes BGY835C_1 20080908 Product data sheet - - BGY835C_1 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 01 — 8 September 2008 5 of 7 BGY835C NXP Semiconductors CATV amplifier module 9. Legal information 9.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 9.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. 9.3 Disclaimers General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. 9.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 10. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] BGY835C_1 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 01 — 8 September 2008 6 of 7 BGY835C NXP Semiconductors CATV amplifier module 11. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 9.1 9.2 9.3 9.4 10 11 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . General description. . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick reference data. . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Legal information. . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information. . . . . . . . . . . . . . . . . . . . . . Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 2 2 2 3 4 5 5 6 6 6 6 6 6 7 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2008. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 8 September 2008 Document identifier: BGY835C_1